Will using a microphone help my ICD-AX412 in this occasion?

So I understand that using a lavalier microphone helps improve the quality of the sound, mostly because you can attach it to your collar to better capture the voice. However, would it improve the quality of my voice recording if both the recorder and the microphone are together in an enclosed space?
I ask this because I need to record while having my recorder in my backpack, for reasons. It works decently enough but I am wondering if a microphone in there would improve the quality or not.

Just take note of these general guidelines in order to get audio quality recordings from the IC Recorder:
Verify that nothing is rubbing up against the microphone when recording.
Verify that the unit is not placed near an AC power source, fluorescent lamp or a cellular telephone when recording.
Ensure fresh batteries are installed.
Use a can of compressed air to blow into the built-in microphone to remove any built up dust or dirt.
If an external microphone is being used, verify that the microphone is clean by wiping it with a dry, lint free cloth.
Reset the unit by removing the batteries for at least 1 minute.
If my post answers your question, please mark it as "Accept as Solution"
http://bit.ly/Win-4K

Similar Messages

  • Will using Myriad Pro help keep filled files small?

    I am a newbie as far as LiveCycle goes and have a problem with a form I created growing to 10 times the intial size because I used our company standard font Century Gothic throughout the document. If I change all the fields to Myriad Pro (the default), will I run into the same problem? I have some users with Acrobat Pro X, but more who would just be using the latest version of Reader to fill and save their forms. Any/all guidance welcomed.

    Fonts should have nothing to do with file size.  But, try it and tell us if it still happens w/Myriad Pro.

  • My HP G72 Beeps when I use my microphone. How do i disable this?

    Well, it did this a while back, and it seemed like I had it fixed for a while, but now it's back. I think I know what causes it. I think when my computer or a program maybe detects that my mic is picking up a loud noise, because when I plug my headset in it only happens if I hit the microphone on it. Anyway, I was wondering if there was a way to disable this without disabling the microphone in the properties? Because when I don't have my headset plugged in whenever I type on my laptops keyboard, it beeps. It's beeping right now -_-. Please help.
    Thanks!

    Make sure the iPad's rotation isn't locked. Flip the switch on the side. If that doesn't work, double tap the home button, there should be a bar at the bottom with apps on it. Swipe your finger to the right, then tap on the icon that looks like a rotation arrow with a lock.

  • ICal using Tiger/Panther Help?

    iCal using Tiger/Panther Help?
    I’m sure this is a stupid question but I’m trying to import my iCal info from home to work and back. I have Tiger at home and Panther at work, is there a simple way to import and export and update? I’ve tried thought email and had know luck, it comes thought as raw text. I’m sure there a simple way to do this! Thanks Scott F.

    Henry,
    Click on your selected calendar, then Click the Info button on the lower right side of the iCal Window, and the window which opens will allow you to change the color in the color window drop down menu which is located in the upper right hand corner of the Info Window.
    Just drag them to change the order.
    ;~)

  • When I copy and paste from Word to my e-mail using Firefox it changes the font and spacing to single and 10pt. It just started doing this a month ago. It does not do it when I am on my laptop or using Explorer. Help, I hate explorer.

    When I copy and paste from Word to my e-mail using Firefox it changes the font and spacing to single space and 10pt.
    It just started doing this a month ago.
    It does not do it when I am on my laptop or using Explorer.
    Help, I hate explorer.

    If this were a project that I was involved in, I would recapture the media at the correct frame rate and rebuild the sequences correctly.
    Moving from production, to post production, to delivery is a series of steps, and the success of any particular step is based on having all the preceding steps done correctly.
    Shortcuts and workarounds tend to create awkward and difficult problems, that often only surface late in the process.
    MtD

  • What are schemas and rules in HR?How it will use in HR?

    Hi HR Proff,
    What are schemas and rules in HR?How it will use in HR?
    Give some documentation on this?
    Early reply is highely appriciable.
    Regards,
    Chow.

    Refer this link -
    http://www.sd-solutions.com/documents/SDS_Payroll_Schemas.html
    Regards,
    Amit

  • Just started using a brand new ICD-AX412. I have recorded a meeting and the playback is fine but I h

    Just started using a brand new ICD-AX412. I have recorded a meeting and the playback is fine through the 412. 2 problems.
    1.  With the expansion M2 SanDisk, it takes the 412 about 10 minutes to "Access". Top line says "Accessing" for 10 mins. Then it becomes available to record.
    2. 412 will not connect to a computer usb port. Just says "connecting" forever.

    Hi pwmac2005! I'd like to verify further information. Does it happen on all USB ports? Does it also happen on another USB? Let me know. Thanks. 

  • HT1981 I will use my 110V MacBook in the Philippines which has 220V sockets. Will the World Travel Adapter Kit help me?

    I will use my 110V MacBook in the Philippines which has 220V sockets. Will the World Travel Adapter Kit help me?

    Assuming you're in North America now, you probably won't need any sort of plug adaptor there; most sockets in the Philippines are the same as those in North America. In case you do, it doesn't contain the correct adaptor.
    Voltage conversion is handled by the MacBook without any additional components.
    (66079)

  • I use MAIL to retrieve my email.  One spam email will not delete.  HELP!  How do I get rid of it?

    I use MAIL to retrieve my email.  One spam email will not delete.  HELP!  How do I get rid if it?  This is on an iPad2.

    Try this. Don't open the email. Swipe across it in the preview window and a red delete button will pop up. Use that to delete it. You can delete it from the trash the same way if needed.

  • I am about to buy my first ipad but dont know which one to buy.  I will use it for email, browsing, watching films etc -Please help me!

    I am about to buy my first ipad but don't know which one to choose and all the information baffles me!!  I will use it for email, browsing, watching films, general things like that.  Please help?

    I'm sure others will disagree, but I'm all about saving $.  I would start by looking online at the Apple store for refurbished devices.  I would also get MORE memory than yout think you will ever need.  The    stuff we have seems always to expand to fill the space available.  I wouldn't get one with cellular capability unless you really, really need it...
    http://store.apple.com/us/browse/home/specialdeals/ipad

  • What is wrong with Firefox ---It will not pull up anything the way it used to --having to use exployer instead ---Help

    What is wrong with Firefox ---It will not pull up anything the way it used to --having to use exployer instead ---Help
    The catalog of our University will not pull up properly on Firefox but will on internet exployer Why?

    The #rdn# is a url variable that is pass to this form from
    another page. I put it in a hidden filed and originallly used it as
    from.rdn. That did not make a difference, so I just used rdn.
    The cfoutput to display the rdn, partnumberid,
    deliverynumber, totalrows, and row, all display properly. I even
    use those in the query anlayzer and the update works.
    I will remove the crparam and see if that makes any
    difference. This is very frustrating since there are no error
    messages and I am led to believe the code works.

  • TS1398 I have an iPad 2 that is updated and using 6.0.1. It is connecting to my wifi just fine. I just purchased a 4th generation iPad. It shows it is connected to the same wifi, same strong signal, but it will not work. HELP!!!

    I have an iPad 2 that is updated and using 6.0.1. It is connecting to my wifi just fine. I just purchased a 4th generation iPad. It shows it is connected to the same wifi, same strong signal, but it will not work. HELP!!!

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I am using a iPhone 3GS Version 4.3.5. It restarts while voice communication. fine. After 5 to 7 mins it will make a restart randomly and after it restart. Can any help me please to fix this problem.........

    I am using a iPhone 3GS Version 4.3.5. It restarts while voice communication. fine. After 5 to 7 mins it will make a restart randomly and after it restart. Can any help me please to fix this problem.........

    try to press the sleep/wake button + home button at the same time and hold them until the apple logo appears. that should help.

  • Dear all, I am using Safari Version 5.0.6 (5533.22.3) but I cannot read any Nepali or hindi text. It shows sort of box sign "द". Please guide me to fix it, I will really appreciate your help.

    Dear all, I am using Safari Version 5.0.6 (5533.22.3) but I cannot read any Nepali or hindi text. It shows sort of box sign "द". Please guide me to fix it, I will really appreciate your help.

    gyanu1812 wrote:
    This is the snapshot of an email that if you have sent it to me.
    No, that is the snapshot of my posting in this forum.   Here is a picture of my sent message.  Are you not getting my emails sent directly to you?

  • My satelite L455-S5975 will not restore using restore discs Help please

    I have a L455 that I tied to restore to the out of box state using the internal restore partition.
    After starting the process mid way I received a fatal error message and the computer now doesn't reboot past the windows 7 icon before displaying another error message and only allowing me to shut the system back down.
    I called the help line and they said it sounded like my hard drive crashed.  I then ordered the restore discs from Acclaim and was told that after installing a new hard drive these discs would get the system back up and running and back to factory out of box status.
    I ran the discs and towards the end of using the second recovery disk I received another error.
    this was using the new hard drive.
    I tried this twice and it didn't take.
    I then put the old hard drive back in and started the restore process again.
    I received this error mid way through the second disk.
    10-FC12-0241
    after selecting the o.k button to shut down I received this error
    F3-F200-0002
    again I selected the o.k. button to shut down and it did but still will not start up past the windows 7 logo.
    Any idea what the issue is or what the error codes mean so that I can get the computer back up and running.
    Thanks
    Jason

    Assuming your install media isnt damaged and your hard drives are good, in order of most problematic to least, you could have an issue with your motherboard, CPU, RAM, or optical drive. 
    Optical drive: attatch an external optical drive (USB) and try to install from there.
    RAM: If you have multiple DIMMs, pull all but one and see if it goes. If it still doesnt work, try the other one.
    If you only have one DIMM module then you can either swap it out or run a full memory test using MEMTEST86.
    CPU: Obtain a replacement CPU and replace it.
    Motherboard: time to buy another computer.

Maybe you are looking for

  • Error while opening XL reporter

    Hi Experts, I get following error while opening XL Reporter Error! Server communication failed! Cause: Error! Unable to get document! Type: 36 Cause:XML document must have to top level element. Tried it on several clients, Win XP, Win 7 but can not o

  • How to send a ping in LV ?

    How can I send a ping in LV ?

  • Feedback Questionai​re Needs Improvemen​t

    Hello, I just completed the feedback questionaire which was sent to my email after activating my Q10. I was happy to be able to provide feedback, but was disappointed with the survey itself as I wasn't given the right opportunities to provide feedbac

  • Incoming email says "Unsupported file type"

    I keep getting emails which say "Unsupported file type" and will not display the actual message.  How do I find out what I need to download to be able to read these emails?

  • Why Are My Actions Opening Dialogs?

    My actions, instead of running with the settings used while defining them, open the dialogs in each step. This is a new headache. In the past the just run using the setting used when the action was defined. What's going on here?