Will Windows Media Center boot on iMac? (apparently has EFI)

Will Windows Media Center boot on new Intel iMac? (apparently has EFI)
http://forum.osx86project.org/index.php?s=1bb30b5a80e6971d414d1113cb265cd5&showt opic=6700&st=80
It seems that Gateway says they use EFI on one of their Windows MCE desktops.
So if any of you lucky new Intel owners who also have the disks try loading it.
As the first person to load Windows on a Mac will be famous ( and maybe a criminal- although Apple said they won't press charges )

Not to be mean or anything but why do all these
people want to have windows xp on a Mac OS X built
computer? If you want media center buy a windows pc
not an apple pc.
Because I have a couple of programs that run only on wintel. If I can get them to run on the intel iMac, I can get rid of the other computer completely.
Glor

Similar Messages

TS1717 i recently downloaded two tracks from itunes: they will not play in my windows media center even though i have added them to that location. any idea what other trouble shooting i can attempt on this issue??

i recently downloaded two tracks from itunes and they will not play in my windows media center. i have never had this problem but the two tracks play on my PC just not in the windows media center and usually all my itunes music plays in there no problem??? any idea what to do? thanks

I'm searching for an answer to almost the same exact problem, using almost the same exact hardware and software. Has an answer been found?
The files that I'm trying to burn come from eMusic, and they are formatted mp3. Recently, (after the iTunes update to 9.2.3?,) they would not drag and drop from iTunes into Toast. From several different discussions I've tried working around this by dragging to the desktop first then dragging and dropping to Toast, going to Toast from a programmer's homemade help window, " iToons," and today, after talking with Apple support, going directly to Toast from my eMusic folder. Alas, all recordings do not perform like they use to. Sometimes they play and sometimes not. There is one I managed, that is listenable, but sometimes I have to put it in my car stereo over and over again as it gets ejected with an error code, sometimes, finally it takes it... Some of the recordings on other disks I've burned are not clean - they have white-noise sounds creeping in... I use to have none of these problems. One time as I was listening to a CD that managed to play, and it just stopped playing... Is there an answer out there to get back to how it use to be? Thanks for you help.

Boot camp & Windows Media Center

Hi!
I'm thinking about buying Windows 7 because I'm interested in using Windows Media Center and streaming it to my Xbox 360.
Before I take the plunge and buy it, I wanted to make sure that Windows Media Center is in fact compatible and works on a Mac. A Google search brought up some old problems where users were having to make some weird install discs to get it to work on older versions of Windows, and it made me a little nervous about purchasing...
Thanks!
Message was edited by: Matt Jenkins

never mind, i blitzed the xp drive and reinstalled. 3rd times a charm

How can I convert the metadata tags on my mp4s to xml files so that they can be read in Windows Media Center?

I have a library with almost 3000 movies and TV shows that I have fully tagged. However, I have decided to start using Windows Media Center and it does its metadata tagging through XML files. I wanted to know if anyone could tell me if there was a way to extract the metadata from those mp4s and convert them to a format that WMC could read? Thanks!!!!

iTunes can make XML playlists so it might be all you need, I made a simple one file playlist and exported it from iTunes. The result is shown below. In principle I could delete the playlist and the entry from the library, as long as I don't delete the file, then later reimport the XML playlist file. I haven't tested this particular scenario, but I assume that iTunes will read all the properties as listed unless it can read some kind of tag from the file itself in which case the current value of the tag would take precedence.
What I don't know is what media center would make of this file, or what its files look like, however assuming they have a similar structure that can be decoded then it should be possible to read data from the iTunes library and write out a text file that will make sense to media centre.
Video Test.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Major Version</key><integer>1</integer>
<key>Minor Version</key><integer>1</integer>
<key>Date</key><date>2013-09-26T23:30:26Z</date>
<key>Application Version</key><string>11.1</string>
<key>Features</key><integer>5</integer>
<key>Show Content Ratings</key><true/>
<key>Music Folder</key><string>file://localhost/E:/iTunes/iTunes%20Media/</string>
<key>Library Persistent ID</key><string>CCF046191585EA85</string>
<key>Tracks</key>
<dict>
<key>155170</key>
<dict>
<key>Track ID</key><integer>155170</integer>
<key>Name</key><string>Abbott & Costello: "Two Tens For A Five" & "Who's On First"</string>
<key>Artist</key><string>Abbott & Costello</string>
<key>Album Artist</key><string>Abbott & Costello</string>
<key>Album</key><string>Abbott & Costello: "Two Tens For A Five" & "Who's On First"</string>
<key>Genre</key><string>Comedy Clip</string>
<key>Kind</key><string>MPEG-4 video file</string>
<key>Size</key><integer>110483524</integer>
<key>Total Time</key><integer>532096</integer>
<key>Year</key><integer>1950</integer>
<key>Date Modified</key><date>2013-06-19T17:35:18Z</date>
<key>Date Added</key><date>2012-12-01T17:30:57Z</date>
<key>Bit Rate</key><integer>156</integer>
<key>Comments</key><string>www.dvdvideosoft.com</string>
<key>Artwork Count</key><integer>1</integer>
<key>Persistent ID</key><string>5AF2C490D1E065CD</string>
<key>Track Type</key><string>File</string>
<key>Has Video</key><true/>
<key>HD</key><false/>
<key>Video Width</key><integer>1136</integer>
<key>Video Height</key><integer>640</integer>
<key>Location</key><string>file://localhost/E:/iTunes/iTunes%20Media/Home%20Vide os/Abbott%20&%20Costello_%20_Two%20Tens%20for%20a%20Five_%20&%20_Who's%2 0on%20First_.mp4</string>
<key>File Folder Count</key><integer>3</integer>
<key>Library Folder Count</key><integer>1</integer>
</dict>
</dict>
<key>Playlists</key>
<array>
<dict>
<key>Name</key><string>Video Test</string>
<key>Playlist ID</key><integer>1930541</integer>
<key>Playlist Persistent ID</key><string>30BF2769C94F7F29</string>
<key>All Items</key><true/>
<key>Playlist Items</key>
<array>
<dict>
<key>Track ID</key><integer>155170</integer>
</dict>
</array>
</dict>
</array>
</dict>
</plist>
Such files are easier to interpret if opened with Notepad++.
tt2

How can I use the FM tuner in Windows Media Center?

Hi everyone.
New to the threads.
Found this site while looking for answers to a problem I'm having. ?:|
I received my Toshiba Satellite computer as a Christmas gift. I noticed it has a cool FM tuner feature.
I also have been playing around with Windows Media Center.
However, I cannot figure out how to operate the FM tuner inside WMC....?
I added the NXP FM tuner program to the "extras" on WMC, but instead of opening up the tuner inside WMC it just opens the separate program.
Does anyone know how I can use the FM tuner (or a different one perhaps?) inside WMC?
Thank you! :)

Hello
I don't have any experience with this because my Satellite doesnt have FM Tuner but nice discussion about it you can find under
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=138027
If you will find final solution it will be nice if you can describe own experience with it. It can be useful for other people here.
Bye and good luck!

I prefer Windows Media Center (but I would like to use Front Row)

This is a plea to Apple that they would update Front Row with some more functionalities!
I'm using my Mac mini as a HTPC and it's doing it's job absolutely great - thanks to Windows Media Center.... Awwww, I wish I didn't have to write that
Well, it's all about functionality and at that point, I have the conviction that WMC is really kicking FR's a**. I really don't get why Apple has chosen to put a media center software (don't know if I dare to call it that) in their OS which lacks of so many important functions.
One of the important things for me, in a media center software, is support for TV tuners, and guess what... Windows Media Center has this, but there's no support in Front Row.
I would also like to see more integration with iTunes, so that I can use the Remote app on my iPhone to control the music in FR and so it's possible to use the party function (also with the Remote app, cause that works really great).
This is only some of the functionalities I miss in Front Row, but I do hope that Apple will consider those so I can get rid of Windows from my machine.
//Cheers

Best way to convey your wishes to Apple is to send them feedback.
Where to send product feedback to Apple:
http://www.apple.com/feedback/

Windows movie maker/ windows media center question

I have a camera that records video in .mov .h264 format that I save on my pc using windows live movie maker. It converts it to a wmv video format still in the 1080P resolution it was shot in. The question I have is that when I go to burn these files to a dvd using windows media center does the resulting video end up down converted to standard definition instead of the HD it was saved as. Is there something I have to change in the settings on windows media center to be able to burn these files in same 1080P resolution it was filmed in, or do I have to convert the .mov files to something other than Windows media video to be able to keep the HD quality, or do I need a different burner other than DVD(blu-ray) for example to be able to burn these files. I have a blu-ray player.

I'll let others answer the question on Windows Movie Maker...
Keep in mind if you put an HD video on a DVD... not all DVD players will support it. You may wish to burn to a Blu-Ray disk.
Personally I use Premiere Elements or Pinnacle Studio. I create an MP4 file and then save it to a DVD for those without Blue-Ray

Re: Satellite P - Windows Media Center issue

Without any visible virus problems or bug threats Windows Media Center starts to crack out in video release.
Simply random loosing pixels on a screen, and all other similar programs such as wmp, vlc media player, mv2 and Intervideo Win DVD working correctly?

I don't know what notebook model do you have exactly and what is wrong there but if you want to have well working Media Centre install OS using delivered recovery media.
After doing this it will work properly.
Maybe you have installed some codecs or some third part application that can have negative influence on WMC functionality. To be honest your posting doesnt offer some relevant info to this issue and it is not possible to say for sure what is wrong there.

Internet TV in Windows Media Center

Hi there,
I have been trying to set up Internet TV in Windows Media Center but to no avail. I followed all the instructions given by Microsoft but I still cannot get the Guide to show up. I even tried setting up Internet TV in the WMC gadget but it is greyed out. Can anyone offer any advice that hasn't been offered by Microsoft that will help? Thanks in advance. I have a W700 running Windows 7 Ultimate 64.
Noel
Moderator note: subject line adjusted for clarity

From what I can figure out, Canadians are not allowed to use internet TV. I would love a solutiuon.

Is there or can Microsoft develop a app for smart TVs so you can stream from Windows Media Center

I have used Windows Media Center for years to record TV programs and have even sertup my kids Xbox 360 as an extender. I've recently purchased a smart TV which allows me to steam music and home videoes from Windows media player but ofcourse the .wtv
files will not play. Would it be possible to develop an app for Smart TVs and other devices so they can be used as extenders. I'm sure many people would be willing to pay for the app. I've tried some 3rd party extenders and not been
happy with there performance and I'd like to not need another box and remote. I'm sure these new TVs have the ability to do it will microsoft allow them too?

Hi,
I agree with S.Sengupta.
You may contact the support of the smart TVs and request a tool to match Windows media player.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Q190 Windows Media Center Missing

Hello I just recived my new q190 and it is missing Windows media Center which a sales person on chat told me was included and the photo on the product page shows the device running. I am unable to locate this application or a activation code for it in the packaging
Also the device came with windows 8 when the "tech specs" page stated it came with windows 7 pro 64, which would have included windows media center.
This HTPC is useless with out WMC.

hi EvanB,
If your model is included in this pdf data sheet then you most likely have a Windows 8 standard machine. In order to get the Windows Media Center, you will need to upgrade to Windows 8 Pro with Media Center. Using a Windows 8 Pro Pack allows you to achieve this. If you specifically ordered a Ideacentre Q190 with WMC via shop.lenovo.com, have you tried giving them your order number to see if the Windows 8 Pro Pack is included in the purchase?
Alternatively, check XBMC as other users find it as a good alternative to WMC,
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

N95 and windows media center..

the 2 don`t seem to like each other .. so i`m now stuck with a laptop that will not talk to my mobile .....the laptop says it is a reconized
has anyone got any ideas how to get round this .. please

I do not think you can do this unless you can convert the Windows Media Center recording to a type of file which is supported by Verizon Media Manager. Media Center files have an extension of *.dvr-ms. Verizon Media Manager ONLY supports .avi, .wmv, .flv, 3gp/3g2, .mpg(non-mpeg 2 videos) and .mp4/m4v files. I have been meaning to try this as well, but have not yet.
Can anyone recommend a good and free video converter for this?
Blame MS for this... that is using a propriety video format...
Let us know if successful.
-oceanx

Apple 23" Cinema Display not supported by Windows Media Center Edition PC

Well I'm learning the hard way and of course that is through experience. I just found out after purchasing my 23"Apple Display and talking to the Apple Support Tech is that Apple does not support the Cinema Display with PC's,
Wish Apple would be more transparent on this issue prior to a costly purchase. For example on the Apple site listing the Display in system requirements:
Windows PC and graphics card that supports DVI ports with full single-link digital bandwidth and VESA DDC standard for plug and play setup
Well I have a Windows PC with a Nvidia Graphics card just as the system requirements state. Yet my PC will not adjust to proper resolution for the Apple Display. The graphics card works fine. Its a driver issue where the Apple Display is not compatible with Window Media Center Edition on Windows PC's
So in conclusion the system requirements for Windows PC's that Apple is stating For Apple Cinema Displays is not correct. The system requirements need also to state that the Apple Cinema Display does not work with Windows Media Center Edition (MCE)
Hope that helps for any users with Windows Media Center Edition thinking or already have purchased an Apple Cinema Display.
73,
John
Mac Pro 2.66 GHZ, 1 GB RAM, 250 GB HD Mac OS X (10.4.7) Sony Vaio Desktop PC, G-Drive External HD,Toshiba Satellite Pro Notebook

Well,
Here is the latest from Nvidia Customer Care educating users on the DVI port on the Nvidia GeForce FX 5200:
"...The basic difference you will see in these ports are in their Physical appearance. The DVI-D has less pins compared to the DVI-I port connector. Also the Apple 23" Cinema Display will work at a resolution of 1920*1200. But this graphics card that is Geforce FX 5200 will not support this resolution of 1920*1200. It will support only till 1600*1200. So that's the reason you were having the issues were you were not able to adjust the resolution"
So I ask, which Nvidia GPU card can I substitute for the current one at a reasonable price? I don't need dual link, so single link would be sufficient for my application . Here is some more helpful tips from Nvidia support. Hope this helps other users, utilizing the Apple 23" Cinema Display"
"...go for a Geforce 7600 GS graphics card which is a AGP 8x compatible graphics card. This graphics card is just 129$ graphics card. Please visit the given link to know about the details of this graphics card."
http://bfgtech.com/7600GS_512.html
And now for the final conclusion of what you need to know regarding DVI ports. Evidently Nvidia uses a term called normal DVI port. I've never heard of that term in the literature in shopping for a graphics card and checking the specs. I guess you need to look for the specific term single or dual link specifically. If it doesn't say that, then what I can gather it is a normal DVI port...whatever the heck that is?
"...Yes let me inform you that the Geforce FX 5200 graphics card does have one DVI port and one VGA port. But these single link and Dual link DVI port is totally different compared to the normal DVI ports. As you wanted to connect an Apple 23" Cinema Display to this graphics card. So for this you will need to have a graphics card which will have a Single link or Dual link DVI ports not the normal ports. So to support an Apple 23" Cinema Display, you will need to have either a Geforce 6 series or the Geforce 7 series graphics card. That's the reason I gave you the list of graphics card which comes with Single or Dual link DVI ports, not the normal ports."
Oh well off to the market to pick up either a Series 6 or Series 7 Nvidia Graphics card. The Nvidia Customer Care team was very helpful and replied to my inquires very quickly through email.
Hope this long drawn out expose helps others who might have issue with connecting their proud Apple 23' Cinema Display to their PC
Kind Regards,
John
Mac Pro 2.66 GHZ, 1 GB RAM, 250 GB HD Mac OS X (10.4.7) Sony Vaio PC, G-Drive External HD,Toshiba Satellite Pro Notebook

Mac + Windows Media Center

I currently have both a pc and a new Macbook. On my pc i use Windows Media Center to record tv shows that i've missed. I'm able to network the two computers to view and share files however i can't play the recorded shows on my Mac. I see them in the shared file but its not opening it. It says "Error opening movie". Can anyone please help me? I'd really like to watch my recorded shows from my Mac laptop and not have to be stuck behind my pc. Please Help???
Thanks

You need to export the Media Centre recordings into a format which will be viewable on the Mac.
Taken from the Media Portal Forums
Here is a quick guide to strip off the ASF wrapper MS use for their DVR-MS file format. This is used in MediaPortal for recording with MPEG-2 capture cards like the Hauppauge PVR-250 / 350 models.
What you need to have...
1. Graphedit http://www.digital-digest.com/dvd/downloads/graphedit.html
2. Cyberlink DirectShow filters MPGMUX.AX & CLDUMP.AX (You'll have to find these)
What you need to do...
1. If not done already register the two filters listed above from the directory where they have been installed.
regsvr32.exe MPGMUX.AX
regsvr32.exe CLDUMP.AX
2. Start Graphedit and the click 'File' then 'Render Media File'
3. Choose the *.DVR-MS file you wish to make into a *.MPG equivalent.
This will automatically build a Graph ultimately providing an output to the Video Renderer and Default DirectSound Device.
4. Remove all filters except the *.DVR-MS output box.
5. Click on 'Graph' then 'Insert Filters' within Graph Edit.
6. Go to the 'Direct Show Filters' section and add 'Cyberlink MPEG Muxer' (MPGMUX.AX) to the Graph.
7. Now add the 'Cyberlink Dump Filter' (CLDUMP.AX) to the Graph and it will prompt for a filename give it a name with a .MPG extension. i.e. Test.mpg.
8. Leave the Filter addition window and connect the DVR Out-1 connector to Audio In on the 'Cyberlink MPEG Muxer' on the Graph.
9. Also connect the DVR Out-2 connector to Video In on the 'Cyberlink MPEG Muxer'
10. Next connect the Output pin from the 'Cyberlink MPEG Muxer' to the 'Cyberlink Dump Filter'
11. You are now ready to get your MPG equivalent file click on 'Graph' and then 'Play' (or click the green play button)
12. You'll notice a green progress indicator moving from left to right. Once complete you will have successfully dumped your MPG file in the same quality it was recorded without re-encoding!!!
Note: The MPG file should be slightly smaller the the original. Don't worry if they are not exactly the same size as we have stripped off the ASF guff.
You can do what you want with the MPEG file. i.e. Convert to AVI, Deinterlace it, Crop It, Resize it, Burn it to DVD/SVCD...etc etc
It worked fine with the two files I tried, but I then ran out of time to try doing something with the resulting MPG files. As I was using RDC to connect into the Media Centre, even playing them wouldn't work as expected. I did try VirtualDub but it didn't like the mpg file, but I am not sure if this was a RDC issue or an issue with the mpg files.

E3000 + Windows Media Center

Hello --
I am trying to setup my laptop (and hopefully my desktop) to an XBOX 360 for Windows Media Center. I configured the XBOX so that it changed from Moderate to perfect by configuring the port forwarding and sent to a reserved IP address on the XBOX. I can browse my internal network on my Windows 7 laptop and see both the laptop, desktop, the XBOX and the router all on the same network (they are all connected to the same band, but I tried doing it in seperate bands too with no difference).
I get the Windows Media Center codes from the XBOX and I plug them into Windows Media Center and it cannot find the XBOX. I turned the Windows Firewall off too and that made no difference. I opened up the ports (on the XBOX and tried it on the laptop) based on http://support.microsoft.com/kb/911728 for configuring the XBOX as the extender. I am not sure which device (XBOX or laptop) gets those ports forwarded but I tried it both ways and it made no difference -- the device could not be seen.
I tried it with uPNP and with it off -- made no difference.
Anyone with any ideas or experience using XBOX Windows Media Center Extender with the E3000??? Thanks in advance.

Hopefully this thread will get a solution. I have the same problem. I can not get Windows Media Center to recognize that I have an (new) Xbox 360 and I can't get the Xbox to see any PC's. I can see the Xbox in Media Sharing and have it checked to share media.
When moving through the steps of the Media Center -> Task -> Add Extender it tells me that my Windows Firewall settings need to be changed, but it's turned off. As is the firewall on Norton.
Don't mean to hijack the thread here, just hoping that a solution is found.
Thanks,

Will Windows Media Center boot on iMac? (apparently has EFI)

Similar Messages

Maybe you are looking for