Will WRT54GL act as repeater for WRT54GL??

Im having trouble getting my WAP54g to speak with my wrt54gl. And the wrt54g is not available to purchase were i live, only the wrt54gl. So im thinking if the wrt54gl will speak flawlessly with another wrt54gl as repeater? Then i will buy another wrt54gl and flush the wap54gs down the toilet.
thanks

There is no way to set a 2nd WRT54GL as an Repeater. So you can buy 1 WRT54GL and a Range Expander WRE54G, As WRE54G is a Wireless Repeater and it will be best for your Network and it will solve your purpose.

Similar Messages

Onfigure a WAP54G to act as a repeater for my wireless network hosted by a Cisco/Linksys WAP610AP

How can I configure a WAP54G to act as a repeater for my wireless network hosted by a Cisco/Linksys WAP610AP
I am using ONLY 2.4GHz wireless band on the WAP610AP running Firmware Version 1.0.04
The signal from WAP610AP is weak in my home office and I would like to use the WAP54G as the repeater. Is this possible? If yes, please help!
TIA

This statement is according to the WAP’s user interface: When set to "AP Client" and "WirelessBridge" mode, this device will only communicate with another Linksys Access Point (WAP54G). When set to "Wireless Repeater" mode, this device will only communicate with another Linksys Access Point (WAP54G) and Linksys Wireless-G Router (WRT54G). In a nutshell, the WAP54G may have a big possibility that it will not work on that device.

XML INVOICE Report RAXINV, Taxline is repeating for each invoice line

Hi Tim
Thanks a lot for your blog
Greeting !!
I have successfully created XML report for AR invoice Printing learning from your blog but stuck to a problem , whenever Invoice is having multiple lines ,say 20, then for each invoice line there is tax line printing 20 times like this:
PART NO.| CUSTOMER PART#/DESCRIPTION | UNIT PRICE | QUNTITY|
A123 | 34 WELD-ROD | 52 | 22 |
Tax Exempt @ 0.00
A234 | 238-AL WIER | 63 | 55 |
Tax Exempt @ 0.00
........ Assume there are 20 lines then tax line also repeating 20 times which i don't want .It should get printed only once if it is same
pls help me to achieve this
Thanks
Rahul

Thanks Tim for Your Instant reply.
I have gone through your duplicate line elimination but my requirement is not this
I'll explain it, I am using LINE_DESCRIPTION tag for printing item description and this tag have two value for it, when the LINE_TYPE =LINE then LINE_DESCRIPTION tag is printing the line description and if LINE_TYPE =TAX
then LINE_DESCRIPTION tag is printing the taxline information. Now if I have 20 lines in Invoice then the tax line will also repeat for 20 times, and if i use duplicate line elimination logic and I have same item it'll not print that item, some times whole invoice become blank.
So I want to print 20 lines and out of that 15 lines are have same tax rate then it should print once at the end of 15th line and for remaining 5 lines if tax rate is different for each line then it should print at the end of each line (5lines)
In the linetreevariable i used <xsl:variable xdofo:ctx="incontext" name="invLines" select=".//G_LINES [LINE_TYPE!='FREIGHT']"/> i.e. I want only line type=LINE and TAX
Thanks
Rahul

I'm having trouble scheduling a "repeat" for an appointment that recurs, e.g., "the second Thursday of each month," rather than on a specific date. It seems that it can only repeat a given date. Am I missing something??

For iCalendar: Is there a way to schedule a repeat for an event that repeats, e.g., "the 2d Thursday of the month."? All I see are options that will repeat (every day, month, year, etc.) on a given date. Am I missing something?

loyev1,
There should also be a "Custom..." selection in the (every day, month, year, etc.) drop down menu. Select "Custom..."
Then:

Setup wired airport extreme (A1408) as repeater for TC (A1470)

How do I setup an airport extreme (A1408) as a wired repeater for TC (A1470)?

Power up the AirPort Extreme for a few minutes
Hold in the reset button on the back of the Extreme for 8-10 seconds and release
Allow a full minute for the Extreme to restart to a slow, blinking amber light
Connect an Ethernet cable from one of the LAN <--> ports on the TC to the WAN "O" port on the Extreme
Open up Macintosh HD > Applications > Utilities > AirPort Utilty
Click on Other WiFi Devices
Click on AirPort Extreme
The setup wizard will open up automatically and take a minute to suggest that the Extreme will be configured to extend the TC network.
Type in a device name that you want to assign to the Extreme and click Next
The utility will setup everything for you. Watch the screen closely to confirm that the Extreme is being configured to extend using Ethernet. When you see the Setup Complete message, click Done.

Repeat for each artboard problem

I have a script that make makes guides around the edge of the artboard. It works fine when you only have one artboard but has issues when there are more. Can anyone see what's wrong here?
#target illustrator
var docRef = app.activeDocument;
var artboardRef = docRef.artboards;
//repeat for each artboard
for(i=0;i<artboardRef.length;i++){
//get artboard size
var left=artboardRef[i].artboardRect[0];
var top=artboardRef[i].artboardRect[1] ;
var right=artboardRef[i].artboardRect[2] ;
var bottom=artboardRef[i].artboardRect[3] ;
//create lines
var lineLeft = docRef.pathItems.add();
var lineRight = docRef.pathItems.add();
var lineTop = docRef.pathItems.add();
var lineBottom = docRef.pathItems.add();
//set line points
var leftmargin = (72);
var rightmargin = (72);
var topmargin = (72);
var bottommargin = (72);
//set line points
lineLeft.setEntirePath([[leftmargin, 0], [leftmargin, bottom]]);
lineRight.setEntirePath([[right - rightmargin, 0], [right - rightmargin, bottom]]);
lineTop.setEntirePath([[0, 0 - topmargin], [right, 0 - topmargin]]);
lineBottom.setEntirePath([[0, bottom + bottommargin], [right, bottom + bottommargin]]);
//make lines guides
lineLeft.guides = true;
lineRight.guides = true;
lineTop.guides = true;
lineBottom.guides = true;

you have hard coded "0", it needs to be changed to variables, otherwise it will point to the same x or y coordinates
//set line points
lineLeft.setEntirePath([[left+leftmargin, top], [left+leftmargin, bottom]]);
lineRight.setEntirePath([[right - rightmargin, top], [right - rightmargin, bottom]]);
lineTop.setEntirePath([[left, top - topmargin], [right, top - topmargin]]);
lineBottom.setEntirePath([[left, bottom + bottommargin], [right, bottom + bottommargin]]);

Please help me with portfolio.I am new in graphic design.I need portfolio done immediately soon as possible otherwise my design advisor will not let me register for fall. I need 15 or 10 artworks to show.Please help me

Please help me with portfolio.I am new in graphic design.I need portfolio done immediately soon as possible otherwise my design advisor will not let me register for fall. I need 15 or 10 artworks to show.Please help me.

Farooq,
If you look at the first one, you should be able to align quite easily as follows, View>Smart Guides being your friends:
1a) ClickDrag the top flower with the Selection Tool (black arrow) so it is clear of the pointy part;
1b) Click an empty spot on the Artboard to deselect, then ClickDrag the top flower by its bottom Anchor Point (Smart Guides say anchor when you are close enough to grab it) down to snap to the top Anchor Point on the pointy part (Smart Guides say anchor when you are close enough);
1c) Do the same for the boroom flower.
If you look at the third one, to get the triangles and the hexagon sized and aligned precisely, you may, creating them with stroke and no fill:
3a) Click with the Polygon Tool and select a suitable/chosen Radius and 6 Sides, then Object>Transform>Rotate by 30 degrees (or use the Rotate option in the Transform palette), you may Object>Transform>Reset Bounding Box to have it look nicer;
3b) Click with the Polygon Tool and select the same Radius and 3 sides, then deselect and ClickDrag the top Anchor Point to snap to the top Anchor Point of the hexagon;
3c) Object>Transform>Rotate by 180 degrees clicking Copy, deselect, and ClickDrag the bottom Anchor Point to snap to the bottomAnchor Point of the hexagon;
3d) Select all and Ctrl/Cmd+G to Group (for alignment purposes, you will know why if you try without grouping, see below).
To create full symmetry, you may use circles rather than almost circular ellipses; you may:
3d) Click with the Ellipse Tool and select a suitable/chosen Width = height;
3e) Object>Transform>Move a copy vertically by the Height (= Width) twice (or you may Ctrl/Cmd+D to repeat), to get three circles over one another with no gaps;
3f) Select the topmost and bottommost ones and Object>Transform>Rotate a copy by 120 degrees twice, to have all the seven circles precisley touching one another; you may Group them, but it is not necessary.
To have everything aligned, just:
3g) Select everything and click Vertical Align Center and Horizontal Align Center in the Align palette; you may click the pointy group or the circles ojnce more before aligning if you want to keep it in place (that will make it the key object that the other set is aligned to).
These ways may also help you further.
Edit: About half an hour after midnight here. High time to attend to other duties, before the sun is up.

Outlook 2010 does not accept password & prompts repeatedly for a password

I'm trying to configure an exchange account. I can access the account on outlook.office365.com & my phone. After I enter my user name & password & click next, a Windows Security window opens up ( the window says Mail Application, connecting
to my username, remember my credentials) asking for my password. When I enter My password it is not accepted and prompts repeatedly for a password. When I cancel a Microsoft Exchange window pops up with the microsoft exchange server address & my mailbox.
Checking the name opens up the Windows Security windows & My password it is not accepted and prompts repeatedly for a password. I also get an error message: the name can't be resolved. Connection to MS exchange unavailable.
Any suggestions will be appreciated.

Hi,
For the issue of save password setting not retained in Outlook, I would suggest you to follow the steps mentioned in below KB article and see if it helps:
http://support.microsoft.com/?id=290684
For the specific error message you mentioned in the post:
"the name can't be resolved. Connection to MS exchange unavailable)"
Usually, it means there is something wrong on your Exchange server side, I would suggest you to check with your mail administrator on this.
More reference about this Outlook error message:
http://www.msoutlook.info/question/531 (Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.)
Thanks,
Ethan Hua CHN
TechNet Community Support

I need to know that Adobe Premier elements 12 will do the following; allow for zooming in of recordings (i,e, can zoom in on items I edit); Can display orgiinal and zoomed recordings side by side; and allow for frame-by-frame playback

I need to know that Adobe Premier elements 12 will do the following; Allow for zooming in of recordings (i,e, can zoom in on items I edit); Can display orgiinal and zoomed recordings side by side; and allow for frame-by-frame playback.
Is this possible?
Any input is appreciated! Thank you.

Tom
Thanks for the reply.
Your thoughts on frame by frame viewing are can do. However, the real time playback feature includes the concept of rendering the Timeline, when the program indicates the need to do so, to get the best possible preview of what you are seeing in the Edit area monitor. That is a major novel in itself. Each time you do a new edit you will get the render indicator message to ignore or act on.
Definitely go the free 30 day tryout route for Premiere Elements 12. I have Premiere Elements 12 (updated to 12.1) and it runs fine on Windows 8.1 64 bit.
Best start with the Premiere Elements 12 Help PDF.
http://helpx.adobe.com/pdf/premiere-elements_reference.pdf
Also please review by blog posts Premiere Elements 12 First Look and Premiere Elements 12 Daily Discovery.
http://www.atr935.blogspot.com/2013/09/premiere-elements-12-first-look-details.html
ATR Premiere Elements Troubleshooting: Premiere Elements 12 Daily Discoveries
When you get to the point of hand on with a mini test run project, I can offer to work with you through some specific workflow details in post exchanges in your thread(s). And we can sort out the can and cannot do.
ATR

DECT repeater for Elements phone

Hi
Does anyone know of a DECT repeater that will work with my Elements base and phones?
I suspect there isn't one in which case any recommendations/suggestions for an IP rated phone that will work with a repeater would be greatly appreciated.
Thanks

are you a business customer? if so you should post here https://business.forums.bt.com/
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Will there be a fix for Firefox's problems with Hotmail. I have gone back to 3.5.9 but mostly I am disappointed by the lack of action on this serious problem where a major and critical feature of a major international website is unavailable in the Firefox

Will there be a fix for Firefox's problems with Hotmail. I have gone back to 3.5.9 but mostly I am disappointed by the lack of action on this serious problem where a major and critical feature of a major international website is unavailable in the Firefox browser.
== URL of affected sites ==
http://www.hotmail.com

We've reached out to the Hotmail team and they've determined that this is a bug in their code. (It was masked by a timing issue in 3.5 that was fixed in 3.6.) We've worked with them to develop a fix but they may not have deployed it yet.

Have family plan with 250 data which I almost use each month. Going on vacation and will be on the road for two weeks. Should I up my data for a month then change back. Is it worth it or should I just run over and pay the extra 15 per gig?

have family plan with 250 data which I almost use each month. Going on vacation and will be on the road for two weeks. Should I up my data for a month then change back. Is it worth it or should I just run over and pay the extra 15 per gig?

Hello mlazaretti. Vacation time is awesome. (Especially a road trip!) Since you will be going out for two weeks, you never know if having extra data may come in handy. I highly recommend switching to the next tier up so this way you have more data. This way it is only $10.00 more versus $15.00, and you dont have to worry about overages. Then change back at the start of the next billing cycle.
If you need help making this change let us know! Have a safe trip!
NicandroN_VZW
Follow us on twitter @VZWSupport

YouTube will not work on safari for me on the ipad. Is there anyway to fix this? I can go anywhere else on the internet fine and it works on google chrome, but on safari it shows a blank screen with the bar on top after it loads.

YouTube will not work on safari for me on the ipad. Is there anyway to fix this? I can go anywhere else on the internet fine and it works on google chrome, but on safari it shows a blank screen with the bar on top after it loads, if it's even loading at all.
I do not know if it's relevant or not, but I got a message on my ipad while on safari saying that my iPhone has a virus. I looked it up and it seems it might have just been an ad from the website I was on, but it happened around the same time YouTube stopped working.

You will find that using the YouTube app will provide a better viewing experience for YouTube videos.

The document information panel was unable to load. the document will continue to open. For more information, contact your system adminsitrator.

Hi Guys,
I am creating the library using object model with custom content type. When i am opening document from custom content type, the meta data fields are not displaying in the document and throwing below error.
The document information panel was unable to load. the document will continue to open. For more information, contact your system adminsitrator.
Document Information Panel cannot open a new form.
The form contains schema validation errors.
Content for element '{http://schemas.microsoft.com/office/2006/metadata/propertiesRoot}properties' is incomplete according to the DTD/Schema.
Expecting: {http://schemas.microsoft.com/office/2006/metadata/properties}properties.
But after saving the document, then meta data is enabled.
Thanks in advance for suggested solutions.
thanks
Santhosh G

Hi,
For a better troubleshooting, I suggest to do as follows:
1. Please try to update the Location column's schema by following the steps below.
1) Go to Site Settings -> "Site Columns"
2) Click on "Location", after the page is opened. Don't modify any settings, click "OK" to forcibly update the field's schema.
2. Re-edit the document information panel template to see if the issue still occurs.
Please go to the Library setting > click the corresponding content type(need to enable managed of content types in Advanced settings) > click Document Information Panel settings.
3. Here are some similar links about your issue, please take some time to look at them:
http://social.msdn.microsoft.com/Forums/en-US/sharepointcustomizationlegacy/thread/243b4852-3f17-4a3a-b6d7-187d65a5f088/
http://blogs.msdn.com/b/raresm/archive/2010/03/30/document-information-panel-cannot-open-the-form.aspx
https://joranmarkx.wordpress.com/2012/02/10/sharepoint-document-information-panel-cannot-create-a-new-blank-form/
If the issue still occurs, please check if the command below can help(change the site URL and the library name in the code):
Apply-Fix -siteUrl "http://your site URL "
function Apply-Fix($siteUrl)
clear
Add-PSSnapin "Microsoft.SharePoint.Powershell" -ErrorAction SilentlyContinue # -EA 0
[Environment]::CurrentDirectory=(Get-Location -PSProvider FileSystem).ProviderPath
foreach ($spwTarget in (Get-SPSite $siteUrl).RootWeb.Webs) {
Write-Host "Checking Web: " $spwTarget.Url
$list = $spwTarget.Lists["your library name"]
$fields = $list.fields
foreach($field in $fields)
if($field.SourceId -eq '{$ListId:your library name;}')
$schemaxml = $field.SchemaXML
$schemaxmldata = [xml]$schemaxml
$schemaxmldata.Field.SetAttribute("SourceID", $list.ID)
$schemaxml = $schemaxmldata.get_InnerXml()
$field.SchemaXML = $schemaxml
$field.Update()
Write-Host "Fixed" $field.Title "field in the library"
Write-Host "Done."
More information:
SharePoint 2010: Creating a Custom Content Type using Visual Studio
http://www.codeproject.com/Articles/410880/SharePoint-Creating-a-Custom-Content-Type-usi
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected].
Dennis Guo
TechNet Community Support

I need to make a pdf document, made in photoshop, 'page turn' and then add it to my website. I know I can do this in indesign but indesign will not open pdf files for some inexplicable reason. Any ideas how I can do it without completely starting again?

I need to make a pdf document, already made in photoshop, 'page turn' and then add it to my website as an e-brochure. I know I can do this in indesign but indesign will not open pdf files for some inexplicable reason. Any ideas how I can do it without completely starting again?

Hello waitingone,
please try this (all terms are translated from my German programs to my best knowledge):
1. Did the creator of the pdf file enable the import options?
2. See import options: choose an other visibility option for your layer.
3. Let you show the import options and click into one with a black background and try these out (often a gray is selected).
4. See trimming: try the different modes there. Often works: "Media".
5. Is the pdf file (eg from Word) correctly created?
6. Is the PDF file protected? >>> no import possible.
7. If that does not help, store the pdf file in Acrobat, repair possible errors, run the PDF Optimizer before placing in InDesign.
Good luck!
Hans-Günter

Will WRT54GL act as repeater for WRT54GL??

Similar Messages

Maybe you are looking for