Will X-FI Fatal1ty output be eno

Hi, just that i bought Sennheiser HD 650 headphones and they do sound awesome with this soundcard. I`m sill thinkin that will this Fatalty Output be enough for these.
I do use this front panel and i have understand that there is amplify, but will that be enoungh.
The impedance of these headphones is 300 Ohm.
Hope i make sense to you. English is far from my language as Neptune is from Earth.Message Edited by Jarza_Death on 08-08-2006 07:7 AM

Well i guess it is. I turn phone volume to bottom and uuh mama. What a clear and deb base
sound. Just like they were next to me singing and playing. Me so happy.
This will surely give ear damage. JokeMessage Edited by Jarza_Death on 08-08-2006 02:22 PM

Similar Messages

In JDBC Sender Adapter , the server is Microsoft SQL .I need to pass current date as the input column while Executing stored procedure, which will get me 10 Output Columns. Kindly suggest me the SQL Query String

In JDBC Sender Adapter , the server is Microsoft SQL .I need to pass current date as the input column while Executing stored procedure, which will get me 10 Output Columns. Kindly suggest me the SQL Query String , for executing the Stored Procedure with Current date as the input .

Hi Srinath,
The below blog might be useful
http://scn.sap.com/community/pi-and-soa-middleware/blog/2013/03/06/executing-stored-procedure-from-sender-adapter-in-sap-pi-71
PI/XI: Sender JDBC adapter for Oracle stored procedures in 5 days
regards,
Harish

Err. E:"TRANSPORTING NO FIELDS" will not fill the output area.

Dear all,
Below are my codes and i keep getting this error
E:"TRANSPORTING NO FIELDS" will not fill the output area. The addition does not make sense here.
Any idea how to fix this?
The first bit...
TABLES: /BI0/MWBS_ELEMT.
DATA:   I_MWBS_ELEMT LIKE /BI0/MWBS_ELEMT OCCURS 0 WITH HEADER LINE.
DATA:   W_MWBS_ELEMT LIKE LINE OF I_MWBS_ELEMT.
Then second bit...
READ TABLE I_MWBS_ELEMT WITH KEY WBS_ELEMT = SOURCE_FIELDS-POSID TRANSPORTING NO FIELDS INTO W_MWBS_ELEMT.
IF SY-SUBRC IS INITIAL.
    RESULT = W_MWBS_ELEMT-RESP_CCTR.
    RETURNCODE = 0.
ELSE.
    SELECT SINGLE * FROM /BI0/MWBS_ELEMT INTO W_MWBS_ELEMT
                    WHERE WBS_ELEMT = SOURCE_FIELDS-POSID
                    AND OBJVERS = 'A'.
    IF SY-SUBRC IS INITIAL.
      APPEND W_MWBS_ELEMT TO W_MWBS_ELEMT SORTED BY RESP_CCTR.
     RESULT = W_MWBS_ELEMT-RESP_CCTR.
    ELSE.
      CLEAR RESULT.
    ENDIF.
ENDIF.

Hi
The error is here
READ TABLE I_MWBS_ELEMT WITH KEY WBS_ELEMT = SOURCE_FIELDS-POSID TRANSPORTING NO FIELDS INTO W_MWBS_ELEMT.
The addtion TRANSPORTING NO FIELDS is in conflit with addition INTO:
TRANSPORTING NO FIELDS means not to fill the work are
INTO mean fill a work area
So or u need to fill a work area or u don't need to fill a work area, but (from the code you've pasted) it seems u need to fill the work area W_MWBS_ELEMT, so your code should be:
READ TABLE I_MWBS_ELEMT INTO W_MWBS_ELEMT WITH KEY WBS_ELEMT = SOURCE_FIELDS-POSID.
IF SY-SUBRC IS INITIAL.
    RESULT = W_MWBS_ELEMT-RESP_CCTR.
    RETURNCODE = 0.
ELSE.
    SELECT SINGLE * FROM /BI0/MWBS_ELEMT INTO W_MWBS_ELEMT
                    WHERE WBS_ELEMT = SOURCE_FIELDS-POSID
                    AND OBJVERS = 'A'.
    IF SY-SUBRC IS INITIAL.
      APPEND W_MWBS_ELEMT TO W_MWBS_ELEMT SORTED BY RESP_CCTR.
     RESULT = W_MWBS_ELEMT-RESP_CCTR.
    ELSE.
      CLEAR RESULT.
    ENDIF.
ENDIF.
Max

Will Premiere Elements 10 output full 1920 x 1080p? (not 1080i) to a file?

I know this is a really simple question, but I can't find the answer anywhere in the software specs, and all sorts of variations of searches bring up no results in the Forum.
I have bought, at full price, (not even upgrade price) every version of Premiere Elements since version 5. I currently have V 9. I can find no way of outputting proper, full, 1920 x 1080p @ 25FPS despite having this as my input source material. (UK JVC Everio Camcorder TOD format in fulll 1080p.) (Not 1080i - 1080p!)
I usually end up setting the project settings to 720p 25FPS (using 1080p source material) and outputting at that, which is a shame.
So the simple question is as above. Will Premiere Elements 10 output full 1920 x 1080p (not 1080i) at 25FPS (British standard) to a file on disk? Preferably in both MPEG4 for best quality uppload to YouTube, and also as a .WMV file format.
(If anyone knows a way to do this in Version 9, I'd be really pleased to hear it - although I have asked that question before. :-)
Cheers, folks.
Steve.

You should be able to set your output up for progressive scan under the Advanced settings.

OpenGL "As it will render from my output device"

I'm trying to decide if I need to use OpenGL (there's no question I would use it if my videocard made it available, but that's another issue)
An excellent article about it is on http://www.tomshardware.com/reviews/photoshop-cs6-gimp-aftershot-pro,3208.html . This was referenced in another Photoshop discussion in this forum.
Before reading the article I reviewed http://tv.adobe.com/watch/learn-photoshop-cs4/using-opengl-optimization/ "Using OpenGL optimization" in which the statement is made "...so that I can actually soft proof sharpening as it will render from my output device."
Assuming that "output device" is referring to something that produces hard copy (i.e., a printer)... It has always been my impression that imagery displayed from a light emitting device (e.g., monitor) is inherently different from the same image displayed employing reflective light (e.g., hard copy).
A simpler example is designing a logo employing colors for a client in a remote location? No matter how well calibrated the local and remote computer screens are one can never be sure the artist and client are seeing the same colors (human eysight concerns notwithstanding). Furthermore if that logo is going to appear in hardcopy, it's still necessary to specify Pantone colors in the program and employ a (hardcopy!) Pantone source to accurately communicate color choices to the client.
Question: How does OpenGL change the relationship computer graphics users have always had to hard copy?
Thanks

I don’t understand, but I’m fascinated.
Color “description” has been a philosophical conundrum for eons.
Since I’d not heard of FOGRA, I immediately looked it up. I was not able to get anything definitive (if you know of web sites that explain it well please let me know). What did happen as I perused web sites relating to the subject (including www.fogra.org which is in German; http://en.wikipedia.org/wiki/HKS_(colour_system)) was that many of them referred to or pictured swatch books not that different from the Pantone one I mentioned—and not as outdated technology.
So I’d really like to know:
What do you mean by “communicating color intents within a standardized environment” (unless that standard environment consists of a swatch book).
How might two lay people (not scientists, though I doubt it would be different for them, since it is basically a perceptual dilemma) might “communicate” any (Pantone) color using FOGRA standards and be ensured that each of them is having the same (reflective color) experience. (In other words, when push comes to shove it is about actually “seeing” the same colors.)

My 3rd gen apple tv will loose all sound output once in a while... why does this happen?

my 3rd gen apple tv will loose all sound output once in a while... why does this happen? when i come home from work and turn on apple tv there is no sound. not even the sound effect when you move your selection cursor around the home screen. ive called into apple support and they were really helpful. the problem was at the time that i needed to sign out of apple and back in after i update the software. this is recurring now off and on for 2 weeks. does anyone have any ideas?

Hi,
Beacon Interval - 400
Threshold - 2346
RTS - 2347
DTIM interval - 1
CTS protection mode - Disabled
Basic rate - Default
Transmittion rate - Auto(Negotiating)
So the other client must have that settings on network adapter Control Panel->Network Connections->configure->Link Speed Duplex - Auto(Default settings).
I hope that to be helpfull for you,if not please let me know.
Thanks!!!!!!
George
Thanks
Kind Regards
ing.George Gochev
DSL and Telecommunications Engineer

Both equii join and natural join are equall.will both display same   output

both equii join and natural join are equall.will both display same
output?

Hi ,
What is preventing you to do a small test and check yourself?
See the below link.
http://psoug.org/reference/joins.html
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> CREATE TABLE parents (
2 person_id NUMBER(5),
3 adult_name VARCHAR2(20),
4 comments   VARCHAR2(40))
5 PCTFREE 0;
Table created.
SQL>
SQL> CREATE TABLE children (
2 parent_id    NUMBER(5),
3 person_id    NUMBER(5),
4 child_name   VARCHAR2(20),
5 comments     VARCHAR2(40))
6 PCTFREE 0;
Table created.
SQL>
SQL> INSERT INTO parents VALUES (1, 'Dan', 'So What');
1 row created.
SQL> INSERT INTO parents VALUES (2, 'Jack', 'Who Cares');
1 row created.
SQL> INSERT INTO children VALUES (1, 2, 'Anne', 'Who Cares');
1 row created.
SQL> INSERT INTO children VALUES (1, 1, 'Julia', 'Yeah Right');
1 row created.
SQL> INSERT INTO children VALUES (2, 1, 'Marcella', 'So What');
1 row created.
SQL> COMMIT;
Commit complete.
SQL>
SQL> SELECT adult_name, child_name
2 FROM parents NATURAL JOIN children;
ADULT_NAME           CHILD_NAME
Jack                 Anne
Dan                  Marcella
SQL> select adult_name,child_name from parents a, children b
2 where a.person_id=b.person_id;
ADULT_NAME           CHILD_NAME
Jack                 Anne
Dan                  Julia
Dan                  Marcella
SQL> ed
Wrote file afiedt.buf
1 select adult_name,child_name from parents a, children b
2* where a.person_id=b.parent_id
SQL> /
ADULT_NAME           CHILD_NAME
Dan                  Anne
Dan                  Julia
Jack                 Marcella
SQL>Regards,
Avinash

Will robo html 6 output work with robo server 7?

I'm sure this is answered somewhere but I have such a hard time searching this forum.... I''m using Robo HTML 6 to create webhelp. Doesn't work with our old X5 RoboEngine. Procurement only offers Robo Server 7. Can I use that with my Robo 6 webhelp output?
thanks!

Hi there
I stand to be corrected on this as I'm not the best resource for RoboHelp Server issues. But I think if you have RoboHelp 7, you need it on both sides. RoboHelp Server 7 and RoboHelp WebHelp Pro output generated from version 7.
Hopefully my colleage and fellow Adobe Community Expert John Daigle or another author more familiar with the Server component will pop in here to confirm or deny.
Cheers... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Will Retina Macbook Pros Output 25p, 4K?

I have a early 2013 13 inch Retina. I have just purchased a Panasonic Lumix GH4 camera which does 4K video. As I live in "PAL" land I would expect to use 3840x2160, 25p video setting on the camera.
My "old" MBP does not output (e.g. to a 4K video monitor) a 4K resolution, rather 2560x1440. The latest Retinas output either 3840x2160 at 30Hz or 4096x2160 at 24Hz, according tp Apple, i.e. NTSC settings
My question is, will a new MBP Retina also output a 25Hz signal?, i.e a PAL one?
I notice that all the cheaper 4K monitors on offer , aimed at video gamers, are either 30Hz or 60Hz input.
Ron

Yes, yes and yes.
"Also am I correct in thinking that my 2008 early Mac Pro has more processing power than the new macbook I am looking at?"
You MUST be joking! LOL!
There will be NO COMPARISON as far as speed, processing power, etc.
You are looking at about a 40% performance boost on the CPU, alone, never mind the boost in RAM.
Coupled with the speed of the drives in the MBPro, you will also notice that your insanely complicated projects that typically take a few minutes to load, will actually load in mere seconds.
GO FOR IT!
Treatment

Will my iphone 4s output stereo to an outside player

I would like to play stereo over my motorcycle sound system. It is capable of A2DP stereo reproduction. I just want to know if my iphone 4s will output stereo to it.
Thanks

You can connect a stereo cable with a 3.5 mm stereo plug on one side for your iPhone and, I assume, a similar plug on the other end to connect to your other stereo system's low impedance input. I would be careful not to connect the cable to a Line-In jack on the stereo. Or use the input jack identified for connecting any device like an iPhone.

WD External Hard Drive will not format, "Input/Output Error"

Trying to reformat an old Western Digital external drive, immediate error in Disk Utility "Input/Output Error". Switched USB cords/ports, nothing. Just getting a second opinion before I trash it.
I know I can probably take out the drive and put it in an external case, but this was just going to be an extra drive for a friend, not worth the $20 for the case.
Thanks

I'm getting the same errors from both my USB ports when I try to format a brand new Maxtor 1TB drive.
I had noticed some strange errors a week ago when Time Machine was reporting an error saying it had failed (this was using a nother external firewire drive). Errors were (not verbatim) "error writing files" & "unknown error".
I naturally thought there was a prob with the ext drive, so knowing that I had at least a good full back-up on there, bought a new ext drive (larger) to perform a full backup on so I could reformat the firewire drive and utilise it elsewhere - but got errors when I tried to set it up as a Time Machine drive seconds after I took it out of the box.
I ran "Verify Disk" on my internal macbook HD and it reported some permission errors and mis-reported file sizes and told me to "Repair Disk". I did, and this stated it fixed a few things. Ran Verify again and it still reported some permission errors.
Now, this leaves me in a sticky spot. I can't format the maxtor external disk in order to manually copy over my disk content, it doesn't even show up in disk Utility or in Finder. I can't perform a Time Machine backup - as it can't see the maxtor disk. I can't do a TM backup on the old Firewire disk - due to the program errors. AND it appears I have permission errors on my internal HD.
Whatever course of action I take to correct these problems - I would like the knowledge that I have a full backup to restore from if things "head south" while I look to correct the HD permission issues.
Anyone out there with some REAL SMART ideas that can help me out here ?
Right now I'll even accept "Half Smart", "Clever" and "**** - Why Didn't I Think Of That" answers !
S.

Sony Bravia Z5500 will not recognise HDMI output from Apple TV 2nd Gen

After a frustrating time trying every connection possibility - various HDMI cables, all 4 slots, I still had no picture or sound. A week later (living so far from the shop) - I( angrily confronted stafff and told them I had a dud Apple TV. I had spent hours on the phone, firefox, apple and sony sites.
They took it from me and plugged it into a samsung 3d tv and - hey presto - instant picture. I feel like an idiot - and I thought I knew all about technical issues. But this is just annoying me. They looked at this old man and just shook their heads. I am resorting to the hope that someone out there knows the answer ... ??

got a bravia KDL-40WE5W and my appletv 1g never had any problems but if you messed with hdmi settings if thats possible and forced it to use various overscan only accept 1080p or something that could cause problems I guess

Debugging the program that will get triggered for a particular output type

Hi all,
I have one program,which will get triggered when a Sales order of type 'VOR' is created.Whenever 'VOR' order is created it will trigger the 'ZALT' output type.And this output type 'ZALT'has been configured to my program.This output type configuration has been set up by my functional consultant.
My problem is I created Sales order of type 'VOR'.But I want to debug my program,which has to be triggered because of that 'VOR' sales order type,which in turn triggers 'ZALT' output type and in turn triggers my program.
My problem is I created Sales order of type 'VOR' by keeping debugging point in my program.But it is not going to my program and simply displaying sales order has been saved.
So is the outtype has been configured properly?.Do I need to go to my functional consultant?Could anyone explain in this regard?
Rgds,
Balaji

Hi Balaji,
If possible, try to repeat the output in the output type messages screen of VA02 and change its dipatch time to '1'(Through further data). Now put the break point in the program assigned to output tye 'ZALT'(You can see this in the TNAPR table) and run the program RSNAST00 through SE38. The program will stop at the break point.
If its not possible to repeat the output and if you want to check it the first time the output type is processed, ask the functional consultant to change the dispatch time in the condition record that is being retrieved for proposing the output type to '1'. Now run RSNAST00. The program will stop at the breakpoint.
Thanks,
Vinay

How will be sap output in super market

hi,
i have a doubt, how to identify that the super market is using the sap application?
with seeing at one glance how to make out that the super market is using the sap application for his invoice?
and sap application which used in super market will be like the output which we get in se38 or it wil in the form of web application
please tell me
Thanks & Regards,
Sagar

There is actually a POS solution SAP acquired back in the late 2005 called SAP Triversity POS and now is called SAP POS.
I believe there are a few supermarkets that run on this, since the application supports functionality such as scaling, bonus buys, item groupings, and all those fun things that would make a supermarket operations to run smoothly.
Now, it is very hard by just "looking at the screen" or by just "asking the cashier to do this or that" to tell whether or not the supermarket is running on SAP POS since the application is extremelly configurable.
Now, you can try by asking the cashier to enter 499 + once function key. This will trigger Manager Code 499 = EXIT POS and, if the application closes then you'll know they have SAP POS.
Good luck,
Alfredo Carigga

I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
There will be no audio output in safe mode. The question to be answered by the test is whether any devices are listed in the Sound preference pane. After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Will X-FI Fatal1ty output be eno

Similar Messages

Maybe you are looking for