Willton invitations printing issues using HP 8600 Plus All in one

Hi All,
I really need help using HP8600 to print some Willton invitations ( card stock paper, 8.5 x 5.5 ).
I tried everything to print right these invitations and I feel to fustrated:
1) I went to priting preferences and set-up to card-stock paper
2) choosed paper size: statement
3)advanded settings: picked Print borderless
Everytime I pick these 2 options I get the following message:
"There are one or more conflicting settings.
One of the conflicting setting is:
* Borderless printing: Print borderless
*Paper size: statement
*Resolve all conflicts for me automatically
*I will resolve the conflict myself"
So whatever option from these 2 I choose I either can't print or I print with a border and I REALLY WANT THE BRODER to just dissapear. I also played with the paper size and try to choose a different one , but I don't have too many left that will not conflict with the borderless printing.
Please help me before I become a crazy bridezilla

Hi,
I afraid that borderless printing is not supported on the required media size.
As you may find listed under Paper-handling specifications > Supported paper sizes, only A4, A5, B5, 4 x 8 inches, 6 x 8 inches and U.S. Government are supported for borderless printing:
*These sizes are compatible for borderless printing
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02858465&tmp_track_link=ot_faqs/top_issues/en_u...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

Printer won't print - HP Officejet Pro 8600 Plus All in 1

Hi,
Please can anyone help me ?
I have Windows 7, 64 bit HP computer with a HP Officejet Pro 8600 Plus All in 1 Printer.
It printed over the network/wireless yesterday. I then had a problem scanning to the computer so I followed advice on the HP community and uninstalled and re-installed the latest software/driver for the printer.
Today it WON'T PRINT!! The printer has a connection to my router (Plus Net Technicolor N router) and shows the little symbol on the printer screen. I tried printing my work today and it says the printer is offline - it can't be as the printer is ON and has a signal connection.
I have uninstalled, reinstalled, turned it on and off on the printer, I've restarted the computer, I've unplugged and plugged in all of it - the router, computer and printer. The computer has the green tick to say the printer is the default and it is ready. It then says to check the network connection or it maybe to do with the firewall settings, but these I haven't changed for over 1 month and I've printed loads of stuff between then and yesterday.
I desperately need my printer and short of going to have to buy a brand new one - I don't know how to fix it!!!
Please can anyone out there help me??!!!
Help!!!!!!!!!!
Thanks for any helpful advice
Victoria

Just to say as well that on the top of the 'X there is a problem printing' At the top where it says the printer - it has on it 'Fax - HP Officejet Pro 8600'
So it is trying to print from the 'Fax' part of the printer and yet when I change the printer device to the actual 'printer' part to default it always changes back to the 'fax' Officejet Pro 8600 Plus rather than the Officejet Pro 8600 Plus.
I will uninstall all the elements to the printer and then find the latest driver to the printer and start again to see if that helps.
Please help me!!!
Thank you for any helpful advice
Victoria

My HP Officejet Pro 8600 Plus all-in-one doesn't scan over my wife network anymore

I have a wi-fi network in my home which works fine for internet on my laptop, and I used to be able to both print and scan over this network just fine. I can still print using the network, but can no longer put stuff into the document feeder and go back to the laptop and use the scan function. The scan function actually no longer even appears on the icon I used to have for it, only the print function.
The scan function does not appear in my device manager (control panel), in either the image devices or the printer devices area.
I have tried to uninstall and reinstall this device several times in many different ways and even tried to obtain the updated driver from the internet. I was successful a few months ago in reinstalling the device and retrieving the ability to control the scanner from the laptop. Now I can only reinstall the printer function, periood.
How can I get back the scanner function on my laptop to use over my wi-fi network? Of course my warranty for service expired earlier this year.

Good day and welcome to the forums, @MSRantal
I read about how you can no longer scan over the network from your Officejet 8600 Plus, to your laptop, and I will do my best to help you out. I have some questions to get started.
I would like to know:
Which operating system you are running on your laptop?
Are you able to scan to another computer over the network?
Have you tried plugging in a USB to the laptop and scanning?
If yes, did a USB connected scan work?
Have you tried scanning after disabling your firewall and/or anti-virus?
When you install the printer, do you see any error messages (or does the install completed successfully)?
If you do not have your printer plugged in directly to a wall outlet, try that.
Hoping to hear from you!
Happy Tuesday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Officejet Pro 8600 Plus (All-in-One) - Incoming Fax but mistakenly answer phone

I have landline phone service. On this line, I have multiple phones, an answering machine, internet service via wireless Uverse setup, and the HP Officejet Pro 8600 Plus as a fax. It's also a printer/scanner - but that uses the wireless Uverse service.
The unit works as a phone, if I answer in fewer than 4 rings. The answer machine picks up after 4 rings. If a fax, the fax connects after 6 rings. (Auto answer function is turned on.) This works.
If I mistakenly answer a fax call with the phone that the HP 8600 is connected through, I can press: 1,2,3 and the fax will answer. This works.
Problem: If I mistakenly answer a fax call from one of the other phones in the house (same phone line is ringing as before - but the phone is NOT the one through which the HP 8600 is connected) - 1,2,3, does NOT work. If I rush to the HP 8600: pressing the "fax" button on the unit does not connect the fax call; nor does the HP 8600 give me the option to "Accept" the call, when the phone as been answered.
Does anyone know what buttons to push to get the fax to connect when the phone line is answered at a phone? Either at the answered phone OR if I can get to the HP 8600 when I hear the fax tone - buttons I can push on the HP 8600 to get it to respond to the fax tones coming in on the line?
Thanks to anyone who can help.

Hello Vandy73,
I see that this is your first visit with us here on the HP Forums. Let me please take a moment to say "Welcome".
I hope you enjoy your experience!
To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you have some concerns when it comes to answering a fax call by accident from another phone. Pressing the 1.2.3 on the fax is the proper way to remedy the issue when you answer from the fax, however this feature will not work from another phone.
I do realize that this is an inconvenience. The only resolution would be to contact the sender of the fax and have them resend.
Thank you for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Fax: HP Officejet 8600 Plus (all in one wireless printer) OS: windows 7 64bit DSL Router/Modem

this is my second Wireless printer from HP. Main problem and only problem is that every time my phone rings the fax answers which is very annoying, hearing the tone while trying to answer the phone. I followed directions exactly. Have the fax set to answer on 6th ring...have auto answer set to off....yet it continuously answers when the phone rings. I've tried turning the printer off and it still happens...even when the PC and Printer are off it happens.
I am on a DSL line...share line with phone...have voice mail....have a home network.....
This question was solved.
View Solution.

Hi,
Considering the fact taht you have tried turning the printer off and it still happens, I find it hard to believe it is the printer.. the fax should be turned off as any other functionality of the device.
Please try unplugging the phone line from the 1LINE port of the fax and try dialing to your phone line.. Can you hear any fax tone then?
If so, I affraid it is surely not coming from the HP device...
If you can see any change, replug the printer.. make sure you connect the cable into 1LINE and not into any other port by mistake...
Also make sure you connect the phone cable using an ADSL micro-filter.. make sure the printer connected into the Phone port of the filter and not into the ADSL port by mistake.
Please let me know of any change,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

8600 Plus All in one~

Hey me please.
States I am not connected to a computer
So i found this site by pulling up something, and all I was to do is scan to computer..
so I find the scan button, and tells me to get with the adin of the computer/program is was disabled...Yikes I am the darm admin person.
I desperate and tried of this.... Help me

Hi @gigiberlin1
It sounds like you might be trying to use the Webscan feature.
I have done some screenshots for you that might help, I know sometimes it is easier when you have a visual. You will need to get the printers IP address from the front panel of the printer. You can touch the wireless icon and view network settings within the wireless menu. Take the IP address and enter it into the address bar of an internet browser.
In the Embedded Web Server, click on Settings
On the left hand side, click on Administrator Settings
You will see the following message pop up, click OK
You will now need to select Continue to this website
It may take a couple minutes for the next page to load. You might even see get a message that says 'Internal System Error', if this happens please just refresh the page. (you can touch F5 on the keyboard to refresh)
Now you can return to the scan tab.
I hope this helps. Please let me know if this resolves the issue or if you require additional assistance, thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

I just purchased a new HP OFFICEJET PRO 8600 e-ALL-in-one printer

I just bought a new printer: HP Officejet Pro 8600 e-All-in-one, Product #: CM749A#B1H and HP 950Black officejet ink cartridge.
I have 5 564XL ink cartridges I bought from HP, unused, unopen: 2 black, expire Aug 2015
1 cyan, exprie July 2015
1 Magenta, expire June 2015
1 Yellow Jaune, expire July 2015
Since those cartridges are not suitable for my new printer, how do I return nd get refund?

You'll need to contact HP Phone Support about this. Failing that, another option would be to sell them on eBay.
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Can't print on Officejet Pro 8600 Plus with OS X 10.10.1

I tried to set up Scan-to-email on my Officejet Pro 8600 Plus. Not only was I unsuccessful at that, i am now unable to print from my iMac running OS X 10.10.1 Yosemite or from my iPhone, which I used to be able to do. I redownloaded the Officejet driver, but not luck. I can scan to my computer, but still can't print. PLEASE HELP!

Hello there! Welcome to the forums @Deano737
I understand you're having troubles with printing to your Officejet 8600 Plus and setting up scan to email to your Mac, running Yosemite. I have some ideas in mind to offer you that may help.
Here they are. In order try:
Mac OS X: How to reset the printing system
Repair disk permissions
Restart the Mac
Install the Full Feature Driver here: HP Officejet Pro 8600 series Full Feature Software and Drivers
Also, download the Apple driver: HP Printer Drivers v3.0 for OS X
Now try setting up scan to email and scanning through the HP scan software, and printing.
Keep me posted with the results!
Happy Thursday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Problems with my printer HP Officejet pro 8600 Plus + Yosemite

Hi got problems with my printer HP Officejet pro 8600 Plus till I installed Yosemite it is not recognized so what can I do now.. No new drivers found by HP

Thanks for this AnnRT!
I've spent the best part of a day trying to figure this out. Everything was fine and then one day nothing worked! I have narrowed the issue down to Bonjour via WiFi as everything worked fine via USB, and via IP over WiFi.
I've now set a static IP for the printer and things seem to be working fine again
Thanks!
Chris

Why can't I print to my HP OfficeJet Pro 8500A Plus All-in-One from my wired PC?

I have an HP OfficeJet Pro 8500A Plus All-in-One on my network. My router is wireless, which several of my devices (laptops, ipads, etc.) use to get an internet connection, but I have one desktop PC that is actually wired to the router via ethernet cable. For some reason, when I attempt to print to the 8500 from the wired PC, the doc just sits in the que, eventally registering as an 'error'. But all of my wirelss devices can print to it just fine.
Oddly, this is somewhat of an intermittent issue, as I have printed successfully from this PC before, but I can't right now. I'll also throw this in: I have at times, plugged an ethernet cable into my wireless-capable laptop and had the same issue. But then I just unplug the calbe, reboot, and turn on wireless, and can print without any issues ... so I suspect it has something to do with the fact that the PC is wired to the router.
Don't know if this has anytthing to do with it, but my wireless network is called 'FrogNet', but my wired PC doesn't see 'FrogNet' like all my wireless devices do. It just indicates that this is part of a generic network. Ideas? (All computers run Win7.)

Hi pulind,
Run the diagnostic utility from Message 2 of 5
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

HP Office Pro 8600 e all in one, Printer Assistant has disappeared

I am running Windows 7, Office Pro 8600 e- all in one
Out of the blue both laptops in the house lost priner assistant and all its functions (fax to folder, etc).
Windows has had a few updates within the last few weeks so I can only assume it stems from there.
For both laptops I have uninstalled and reinstalled both from the CD and from the most current driver software from the hp website with no success.
I have run HP print and scan doctor with no success.
Any and all help would be greatly appreciated...I am at a loss.
This question was solved.
View Solution.

Hi,
From the start menu click on Programs and select HP, next select the HP Officejet Pro 8600 folder and follow the Uninstall.
Next download and install the following software, do not use any older software from the CD or a software you may saved from the HP site in the past as the issue will remain while any previous software being used:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-3&cc=us&dlc=en&lc=en...
Once you are done, reboot your PC and click the HP Officejet Pro 8600 icon, located on your desktop.
Please let me know the results,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Officejet Pro 8600 e-All-in-One Printer - N911a: Scan & Copy in color results in full cyan page

Product Name: HP Officejet Pro 8600 e-All-in-One Printer - N911a
OS: Windows 8.1 64 bit
I noticed the problem: After I scanned a medical card that was 80% cyan.
Problem: The problem persists when scanning/copying using the ADF or using the scanner glass bed.
Only occurs during color scanning or copying. I can print a file from my laptop or home pc with no issues, as long as the color file did NOT come from my printer.
If I had scanned the small O'Riley's note in black & white there would have been no streaking.
I have reset, used the HPP Dr., cleaned the glass, etc, & followed Solutions 1 - 3 http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02881567&lc=en&product=4323659&tmp...
I sincerely appreciate your assistance.
Rene'

Hi @Veritasabt,
I see that you are having issues scanning and copying in color from the glass and the ADF. Thank you for providing the screen shot. I can help you out today.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
Update the printer's firmware. HP Officejet Pro 8600 N911a Firmware.
Try scanning again to see if you have the same results.
Please check your private messages for additional steps to try.
In the forum beside your handle name just click on the envelope to view it.
Have a nice weekend!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Officejet Pro 8600 e-All-in-One Printer - N911a printer assistant

Hi!
So, I replaced an HP Officejet Pro 8600 e-All-in-One Plus with an HP Officejet Pro 8600 e-All-in-One Printer - N911. Subsequently the HP Printer Assistant desktop shortcut disappeared from my computer -- and apparently from the computer entirely because it eludes searches as well. So multiple times (like, 20 times) I have removed and reinstalled the printer on this computer because sometimes -- not every time, infuriatingly -- immediately after installing the printer from the online driver, the Printer Assistant opens -- but there doesn't appear to be a way create a desktop shortcut for it. As soon as I close it, it's gone forever, and it's just not practical to have the Printer Assistant open all the time. The next time I want to scan something wirelessly, I have to go through the process again. It's driving me insane.
Is there any way to download just the HP printer assistant software, or some sneaky way to create a shortcut for it? It's the only efficient way for me to interact with the printer for scanning (the bulk of the printer's usefulness) at my home office, and if I cannot get it to work consistently, this will be the last HP product I buy.
Thanks in advance!

Hi,
Follow the steps below to repair the software installation when cliking the HP Officejet Pro 8600 will not launch the HP Printer Assistant software, these steps should resolve a such:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03659948&lc=en&jumpid=reg_r1002_us...
Please let me know of any change,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Cant WiFi connect HP Officejet Pro 8600 e-All-in-One Printer to internet

I cant WiFi connect HP Officejet Pro 8600 e-All-in-One Printer to internet... at least I think that is the problem. I have followed all the instructions on HP Print and Scan Doctor as well as Troubleshoot HP Installation Failure. My router is running fine for everything else and I have entered the static address for the printer into the router. It appears that my printer believes it is connected to my WiFi (Ihave WPS it multiple times), but when I type it's IP address into my IE nothing shows up. My router doesn't appear to see the printer either. I have the latest driver installed on my computer. I suspect this may be a router issue: new router Asus Double 450 Mbps N Router (Dual band - but it appears my router is using the 2.4Hz band to communicate with WPS). Windows 7 64.
Any help is appreciated!
This question was solved.
View Solution.

Hello NRHII,
Welcome to the HP Forums!
I understand you're unable to connect the Officejet 8600 over a wireless connection. I will do my best to assist you! I would recommend power cycling the router, printer and computer:
1) Turn off your printer
2) Disconnect the power cord from the back of the router
3) Restart your computer
4) Wait less than 60 seconds, plug the power cord back into the router
5) Turn your printer back on, wait for the computer to turn on
Is the wireless light blinking on your printer? If so, please reconnect the wireless on your printer by using the wireless setup wizard: (This information is stated here.)
On the printer touch screen, touch the Right Arrow ( ) to display the second navigation screen.
Touch the Setup icon ( ).
Touch Network , touch Wireless Setup Wizard , and then touch Continue . The printer searches for available networks.
Touch the name of your network, and then touch OK .
If prompted, enter the network password, and then touch OK . The printer connects to the network.
Also, as I was typing this post TreeFrog posted some great information to follow.
Have you followed this entire HP document on Printer Does Not Maintain Wireless Connection? If not, follow this document. Please post your results, as I will be looking forward to hearing from you.
Have a great day!
I worked on behalf of HP.

Wireless configuration for HP OfficeJet 6500A plus All-In-One printer on Ubuntu 10.04

I have bought a HP OfficeJet 6500A plus All-In-One printer CN557A, which I want to use with ubuntu 10.04 64-bit as a wireless network printer.
Before i bought i checked compatibility on www.hplipopensource.org and www.openprinting.org, and all was in order.
The machine is autodetected and fully functional when connected with a usb cable, but i have not managed to get it to work as a wireless printer.
This is what I did:
I configured the printer on the wireless network (through the printer interface), and it connects. It prints out a "Wireless Network Test Report", and everything works. I can ping to its local ip adress, and access it through the browser. HP eprint also works.
I installed hplip 3.11.10 and dependencies manually. I did this because the default hplip in ubuntu 10.04 did not recognise the device.
I ran 'hp-check', which gave no errors or warnings:
tjoff@mek-403-jakbo-01:~$ hp-check
HP Linux Imaging and Printing System (ver. 3.11.10)
Dependency/Version Check Utility ver. 14.3
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
| SYSTEM INFO |
Basic system information:
Linux mek-403-jakbo-01 2.6.32-35-generic #78-Ubuntu SMP Tue Oct 11 16:11:24 UTC 2011 x86_64 GNU/Linux
Distribution:
ubuntu 10.04
Checking Python version...
OK, version 2.6.5 installed
Checking PyQt 4.x version...
OK, version 4.7.2 installed.
Checking for CUPS...
Status: scheduler is running
Version: 1.4.3
error_log is set to level: warn
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0
| COMPILE AND RUNTIME DEPENDENCIES |
note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
Checking for dependency: CUPS - Common Unix Printing System...
OK, found.
Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.
Checking for dependency: CUPS image - CUPS image development files...
OK, found.
Checking for dependency: DBus - Message bus system...
OK, found.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.
Checking for dependency: libjpeg - JPEG library...
OK, found.
Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.
Checking for dependency: libpthread - POSIX threads library...
OK, found.
Checking for dependency: libtool - Library building support services...
OK, found.
Checking for dependency: libusb - USB library...
OK, found.
Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.
Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.
Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.
Checking for dependency: Python devel - Python development files...
OK, found.
Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.
Checking for dependency: Python XML libraries...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
OK, found.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: SANE - Scanning library development files...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
| HPLIP INSTALLATION |
Currently installed HPLIP version...
HPLIP 3.11.10 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.11.10
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.11.10
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.11.10
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.
[plugin]
installed=0
eula=0
Current contents of '~/.hplip/hplip.conf' file:
[last_used]
printer_name =
working_dir = .
device_uri = "hp:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW"
[commands]
scan = /usr/bin/xsane -V %SANE_URI%
[installation]
version = 3.11.10
date_time = 2011-11-16 14:30:35
[settings]
systray_messages = 0
systray_visible = 0
[fax]
email_address =
voice_phone =
[refresh]
rate = 30
enable = false
type = 1
[polling]
enable = false
device_list =
interval = 5
| DISCOVERED USB DEVICES |
Device URI Model
hp:/usb/Officejet_6500_E710n-z?s HP Officejet 6500 E710n-z
erial=CN16F2402Q05JW
| INSTALLED CUPS PRINTER QUEUES |
B-403-271-A4-COLOR2
Type: Unknown
Device URI: smb://mek-ps1.win.dtu.dk/403-271-A4-Color
B403-271-A4-BW
Type: Unknown
Device URI: smb://mek-ps1.win.dtu.dk/403-271-A4-BW
HP-Officejet-6500-E710n-z-FAX
Type: Printer
Device URI: hp:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW
PPD: /etc/cups/ppd/HP-Officejet-6500-E710n-z-FAX.ppd
PPD Description: HP Officejet 6500 e710n-z, hpcups 3.11.10
Printer status: printer HP-Officejet-6500-E710n-z-FAX is idle. enabled since 2011-11-16T01:00:45 CET
Communication status: Good
| SANE CONFIGURATION |
'hpaio' in '/etc/sane.d/dll.conf'...
OK, found. SANE backend 'hpaio' is properly set up.
Checking output of 'scanimage -L'...
device `hpaio:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW' is a Hewlett-Packard Officejet_6500_E710n-z all-in-one
| PYTHON EXTENSIONS |
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
| USB I/O SETUP |
Checking for permissions of USB attached printers...
HP Device 0x5412 at 002:005:
Device URI: hp:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW
Device node: /dev/bus/usb/002/005
Mode: 0664
| USER GROUPS |
lp adm dialout cdrom plugdev lpadmin admin sambashare vboxusers
| SUMMARY |
No errors or warnings.
Done.
I then ran 'sudo hp-setup', chose the device (which was detected), chose my wireless network, entered the wireless security key. On the configuration results dialog I get two messages:
"Your printer has been succesfully configured on the wireless network. You may now unplug the USB cable"
and
"The Ethernet cable is plugged in which will prevent you from connecting to a wireless network. To connect wirelessly, remove the cable and try again. (VSA000)"
There is no ethernet cable plugged in, so i can't remove it. I unplug the USB cable and click 'finish'. This makes the 'hp-setup'-dialog start over again, and the printer has not been installed.
In the terminal i have the following:
tjoff@mek-403-jakbo-01:~$ sudo hp-setup
[sudo] password for tjoff:
HP Linux Imaging and Printing System (ver. 3.11.10)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Searching on USB bus...
GET /IoMgmt/Adapters HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/Adapters/Wifi0/WifiNetworks HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/Adapters/Wifi0/Profiles/Active HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/Adapters/Wifi0/Protocols HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
error: Missing response key: 'iorotocols-iorotocol-dd:dnsserveripaddress-0'
GET /IoMgmt/Adapters/Wifi0/VsaCodes.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/Adapters/Wifi0/WifiNetworks/SSID=mVnmXfsu HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/IoConfig.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
I then tried to reconnect the printer usb cable and run 'hp-toolbox' and click "Wireless/wifi setup using USB". Now i get the error:
tjoff@mek-403-jakbo-01:~$ hp-toolbox
HP Linux Imaging and Printing System (ver. 3.11.10)
HP Device Manager ver. 15.0
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
HP Linux Imaging and Printing System (ver. 3.11.10)
Wifi Configuration Utility ver. 1.1
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
error: Channel write error
error: An I/O error occurred. Please check the USB connection to your printer and try again. (Device I/O error)
Done.
I do not how get past this stage, and any help is welcome.
This question was solved.
View Solution.

A friendly soul on ubuntuforums pointed out to me, that the wireless configuration is only necessary when the printer is NOT connected to a (W)LAN. So all I really had to do was to configure the printer in the CUPS administation page, and it worked. Problem solved. Silly me.

Willton invitations printing issues using HP 8600 Plus All in one

Similar Messages

Maybe you are looking for