Willy introscope issue in Basic Configuration
Hi Experts,
I am facing issue with Willy introscope enterprise edition, we are unable to view the installation path in SOLUTION MANAGER 7.1 SP12, Basic configuration in step 3.
Can any body please through some light on this issue.
Thanks in advance,
Jana
Dear Janarthan, As a pre-requisite to this step you need to perform following first then take it head with basic configuration.
1. A diagnostics agent needs to be installed and connected to Solman on the Wily EM host.
2. The operating system user of the diagnostics agent needs to have read write access the Wily EM installation directory. (defaul : /usr/sap/ccms/wilyintroscope).
Also, You would need to have the Wily EM installed as suggested by Matt to resume the Basic Config at Solman.
Regards, Amber S | CTS
Similar Messages
-
Host informations in QA Willy Introscope
Hello everybody
I'm installing SMD Agents of QA and DEV hosts and I'm doing the installation in the QA Solution Manager. The installation of the agents is successfully. The agent is online at the option Agent Administration at SOLMAN_WORKCENTER transaction. But, the informations of the host appear in the Production Willy Introscope not in the QA Willy Introscope. How can I change this and make the informations of the host appear in QA Willy Introscope?
RegardsHello,
You should check the enterprise manager host provided for the QA Solman.
1) Check it in the step 4 of the basic configuration of transaction solman_setup.
2) Check in the diagnostics setup -> diagnostics system -> advance setup -> tab WILY
3) If you have performed the Introscope Setup for the managed system check the selected EM there.
Regards. -
I can not make a "Byte Code Adapter Installation"
When I open meets both paragraphs in step Managed System Configuration is somewhat obscure situations that do not allow the automatic configuration Introscope agent and Introscope Manager
Please help to resolve a number of questions that might help me complete the setup :
1. Why has the status of Enterprise Manager : <No Enterprise Manager configured> ( see picture)
I set up Enterprise Manager in accordance with the installation instructions and complied with all the setting items . Since without any configuration can be associated with the appearance of this status ?
2 . Why Server Node is empty detail settings ?
JDK Location:
Enterprise Manager Host:
Enterprise Manager Port:
Introscope Agent Name:
Introscope Agent Profile:
Autoprobe Directives:
Wily Version:
Introscope Agent Version:
Introscope Agent Log Location:
3 . What a mistake ($ MC: DIAG_WILY_MSG: 032 : L), which appears when I click configuration "Configure Introscope Agent Setup ...", and what it can be linked ? ( see picture )
And the last question , which is also linked to the process of automatic configuration and refers to a phrase from the instruction (Introscope Version 9
Installation Guide For SAP July 2012) points out "Automated Installation of the Introscope Agent via SMD"
there is such an item:
2 . Deploy ISAGENTJ5 *. SCA which is the Introscope Java Agent 9 with SDM to Solution Manager. You may need to deploy also ISAGENT *. SCA which is Introscope Java Agent 8.
However, nowhere does it say where exactly ( on what the absolute path ) I must perform unloading and then what to do with this dischargeThe problem was resolved a small manipulation - on stage Basic Configuration,
point 3 "Configure CA Introscope"
I forgot to add to the list of CA Introscope Enterprise Managers link to my manager.
Thus it is necessary to take into account that the path should be correct (usually for linux - /usr/sap/ccms/apmintroscope) and the directory should be applied appropriate privileges.
Then in paragraph "Byte Code Adapter Installation" - there are all the necessary data, and it starts to work correctly -
Several errors during system preparation / basic configuration
Hello,
during the basic configuration I get stuck in the process step configure automatically -> setup bw.
In the slg1 I can see several errors where I don't know if they are related to my bw problem or other probleme. Maybe someone can give me a hint how to solve the issue.
@5C\QError@ 2011/11/10 16:58:07 : DIAGTPL/CONFIG/HANDLER=CL_DIAGLS_ABAP_INST_TECH_SY Item does not exist
@5C\QError@ Product system DUM has no active standalone product version @35\QLong text exists@
@5C\QError@ No detected product instances available for technical system C21 @35\QLong text exists@
in the Solman_setup I have the problem that
ESR: Extractor setup is not sucessful!
Cube 0SM_BPMRH is not active and will now be activated automatically
System status failed for system
Could someone please help me to solve some of the problems?
Thanks a lot, VanessaHello Vanessa,
I wouldn't recommend looking at SLG1 at all times and try to find solutions for it, since Solution Manager deals with a huge landscape and in most cases some warning is thrown in the logs for any reason.
For example, the "CL_DIAGLS_ABAP_INST_TECH_SY Item does not exist" and "no active standalone product version @35\QLong text exists@" can be due to systems coming from SLD to the LMDB with no correct definition. If SLD is not passing this information, it is 99% because the system is not well defined there. Hence it is just a warning.
Now if you see something in SLG1 and indeed you have issues in this diagnostics system, it must be investigated.
For your BI problem:
Please execute the steps as described in section "3.2.1 Activation of
Info Cube from BI Content" in the Setup BPA Guide.
1430754 Business Process Analytics: Setup guide
(https://websmp101.sap-ag.de/~sapdownload/011000358700001210492010E/Setu
p_Guide_BP_Analytics.pdf)
Furthermore, I strongly recommend that, for Solution Manager 7.1, you make sure you have the latest SP in ABAP and JAVA. Now we are at ST400 SP03 and LM-SERVICE SP03 patch level 1.
You must not forward to the next steps if you have a step yellow, red or with Update checked.
Best regards,
Guilherme -
Basic configuration in GRC 10 for portals
Hi Gurus,
Could you please tell me the basic configuration details in GRC 10 for portals.
Thanks,
MukeshHi Mukesh,
You can refer to https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361…
However there is no such guide on Portal integration with GRC, you might need to follow below steps:
1- Create one HTTP type RFC connection between GRC and Portal system.
2- Create System Alias in portal system for GRC system
3- Deploy the GRC Portal content in Portal system
5-Portal content comes with 5 work-sets and one security role.You can assign the portal role that comes with the Portal content to user in Portal and also GRC roles to the same user in GRC system.
Hope this helps.
Regards,
Ameet -
No ''BS: SRM-Portal(Basic Configuration) V1'' in /NWA Deply and Change
Hi Expert
i want to integrate SRM7.0 with Portal,
Enviroment :
SRM7.0 AS ABAP
ERP 6.0SR3 AS ABAP/AS JAVA
BP for SRM7.0 has installed
SRM has been added into Trused System in Portal
and i follow InstGuide > "Guide for Automated Configuration: Connecting Portal Systems u201D
When i logon Portal with <hostname>:<port>/NWA
and click > Deploy and Change
there is no "BS: SRM-Portal(Basic Configuration) V1u201D exist
i dont know Why, whether because my NW7.0 patch 14 need to upgrade? Or other reasonHi,
You can also configure portal connection manually. Please check the Configuration Guide in SAP Solution Manager or offline downloaded configuration guide in http://service.sap.com/srm-inst SAP SRM Server 7.0 -> Configuration Guide for SAP SRM 7.0 -> Business Package for SAP SRM 7.0.
You can also access SRM via NWBC html in current SRM 7.0 SP06 without Portal. It is called Portal-Independent Navigation Frame.
Regards,
Masa -
Basic configuration guide to set ECC to PI
Hi Experts,
I would to set a scenario for BAPI to File.
Please let me know the basic configuration to be set for ECC and PI.
Explain in detail as I am totally new to this.
Thanks
SunilHi Sunil,
the 'TP column' can be seen by using
TCODE
SMGW
on the gatway system that you are registering the <Program ID>.
Menu option
GoTo
-> Logged on Clients
The 'TP Name' column is the 3rd column.
Can you advise :
(1)
if the RFC destination (created on the ECC) system is working by using the 'Test Connection' option in the SM59 RFC destination?
(2)
Is the respective RFC Sender Adapter Communication Channel activated?
(3) how you are call in the RFC, e.g. ABAP report or SE37?
Regards
Kenny -
SolMan 7.1 Configuration:Basic Configuration -Step 2
Hi All,
I completed the upgradation of SolMan 7.1 with SPS04 and did the System preperation and Basic Configuration.(txn:solman_setup)
In the Basic Configuration at the step #2 - Specify User & Connectivity Data I'm still seeing the yellow simbol(Activity Warnings), but within this step all the sub steps( 2.1 to 2.5) are in Green mode.
Do you guys know how to remove this yellow symbol on the step#2?
Thanks,
AllamHi,
please follow the sap note
[Note 1498701 - Yelow status for Create Users when a local BW system is set|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1498701] to fix this
Thanks,
Jansi -
Solman 4.0 basic configuration error
Hi Experts,
While i'm performing initial configuration part 2 (auto configuration) in solman 4.0, i'm getting some error. Plz help me to fix
Basic Configuration Error
Message no : IMG_FASTCONF015
Diagnosis
Solution Manager Basic Configuration Error
Procedure
check the messages in application log.
object: SOLAR
subobject: SOLMAN_CONFIG
Thanks
RamHi,
Thanks for your quick reply
Problem class important------------Basic Configuration error
Technical Data
Message type ---------- E (Error)
Message Class---------- IMG_FASTCONF (IMG Quick Configuration Error Messages)
Message number-------015
Message variable 1-------
Message variable 2-------
Message variable 3-------
Message variable 4-------
Message Attributes
Level of detail ----------
Problem class-------- 2 (important)
Sort criterion ---------
Number--------------------1
Thanks
Ram -
i am having IDSM-2.can anyone give me the basic configuration setting of switch as well as IDSM-2.I donot know what to configure on IDSM-2.
regadrs
shivluFollowing links may help you
http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_configuration_guide_chapter09186a0080459221.html
http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_installation_guide_chapter09186a0080757a88.html -
Basic Configuration and Support Pack Stacks
Hi everyone,
Just a general question about the Solution Manager 7 "basic configuration" stuff.
Are you required to perform the "Basic Configuration" everytime after you apply a new support pack stack to solution manager?
Or is it a one off, after the initial installation?
Cheers
ShaunHello,
https://websmp109.sap-ag.de/~sapidb/011000358700001927282008E has some information about your question.
Only some parts of SOLMAN_SETUP must be run everytime, other parts are optional. For an overview please visit the link.
Best regards,
Miguel Ariñ -
Basic configuration AP-Switch problems
Hello,
I am having a problem when I try to configure my AP1131 to a port in a WS-C3560-24PS-S. I've always known that the switchort must be configured as a trunk.
I will try to give a clear explanation of what I've done:
In the AP.
1.- ip address
2.- default gateway
3.- vlans configuration
4.- map SSIDs to vlans
In the switch.
Only configure the port as a trunk
interface FastEthernet0/9
switchport trunk encapsulation dot1q
switchport mode trunk
This way I can do everything. Get access to the network, ping, telnet other devices, but not administer nor ping the AP. But if I configure the switchport as an access port:
interface FastEthernet0/9
switchport access vlan 10
switchport mode access
This way I can ping other devices from the AP, ping and telnet the AP from the wired network (my laptop). I can connect to the SSID but not ping nor telnet AP or other devices.
I hope that someone give a clue of what I'm doing wrong or forgetting to configure.
Thanks a lotHave you tried going through the Wireless LAN Controller and Lightweight Access Point Basic Configuration Example (Document ID: 69719)?
http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080665cdf.shtml
Does this document help? -
1751 Basic Configuration required
At Present I am using No-name VOIP Routers and they are working fine. Now I want to replace them with Cisco Routers to get better results. I tried to configure them with Cisco "ConfigMaker" but I am facing lots of problem. I need help.
I need a basic Configurations:
Location-1:
Cisco 1751V Router, installed with WIC-1NET Card in Slot 0 and VIC-2FXO installed in Slot 1.
PPPoE Settings ( User Name: chopra Password: 123 Fixed IP Address: 82.x.x.6 Authentication protocol: pap)
Fixed IP Network Settings: ( IP Address 82.x.x.6 Subnet Mask: 255.0.0.0 Gateway IP address: 82.x.x.46 Pimary DNS Server: 81.x.x.1 Secondary DNS Server: 81.x.x.2)
PSTN: Country Code: 0049 Area Code: 2331 Phone Number: 400595 and 400596
Location-2: Cisco 1751 Router, installed with WIC-1NET Card in Slot 0 and VIC-2FXS installed in Slot 1.
Fixed IP Network Settings: ( IP Address 203.x.x.108 Subnet Mask: 255.255.255.0 Gateway IP address: 203.x.x.98 Pimary DNS Server: 203.x.x.98 Secondary DNS Server: 203.x.x.98 )
PSTN: Country Code: 0092 Area Code: 85 Phone Number: 77777777 and 88888888
I want to make calls from Location-2 to Location-1 in PSTN area and the calls from Location-1 should be diverted to Location-2.
ThanksCheck out the the Dial peer section in this link :
http://www.cisco.com/pcgi-bin/Support/browse/psp_view.pl?p=Technologies:Voice_Call_Routing_Dial_Plans&viewall=true -
AP1602E - basic configuration guide ..
Hi
I bought a new 1602E ap .. so it comes with no documentation and the only doc that i foudn in the net it was this:
http://www.sws.cz/prod_img/cisco/ap1600getstart.pdf
but I need the started guide to the basic configuration ..
My concern is because the AP will be used for a producction enviroment and the point will be
what will be the best radio configuration with open with non security .. ? 2.4 or 5ghz ..
is any one know about it I appretitate your support
thnks in advanced
regardsHi,
do you have AIR-CAP or AIR-SAP
as AIR-CAP is controller based AP where you need the WLC to get the AP configured. Simply you have to connect the AP with POE.
AIR-SAP is standalone and below is the doc to configure it:-
http://www.cisco.com/en/US/docs/wireless/access_point/15_2_4_JA/configuration/guide/scg15.2.4_book.html
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080c0b93c.shtml
2.4 GHZ or 5GHZ depends on what type of clients you want to connect ? If you have clients with A radio/ N radio then you need 5 GHZ and if your client is having G radio/N radio you can go for 2.4 GHZ. -
Basic configuration for Wireless AP
I have been task to configure and deploy 3 access point in three site within our organzation. I need a little help with this task in order to have it complete by Friday. The model we are using is a Air-Sap1602i-A-K9. Thank you for your time.
Please refer to the following links:
https://supportforums.cisco.com/document/61936/autonomous-ap-and-bridge-basic-configuration-template
http://www.cisco.com/c/dam/en/us/td/docs/wireless/access_point/15_2_4_JB/configuration/guide/scg15_2_4_JB3a.pdf?mdfid=284366503
Maybe you are looking for
-
How do I change the phone number associated with my macbook pro
I have a new macbook pro and it somehow is associated with my husbands phone number and not mine. So when I text it comes from his phone and all contacts associated with his phone. How do I switch it to be my iphone?
-
Why is it that when I build a playlist, at the bottom of the playlist it says that there is 31 songs at 149 mb, but when I burn the playlist to a 700 mb CD-R it won't fit on one disk. Does it have something to do with the format?
-
Hi, I want to extract data from a query into a transactional ODS via APD. The query is based on an InfoSet that joins 5 InfoObjects. But in APD, I cannot select this query as data source! Is APD not able to work with such queries? Thanks for any help
-
Can you explain with examples for IDOC bundling & IDOC packing
-
...At http://gallery.technet.microsoft.com/Windows-Server-2012-Core-e0970aa7 James McIllece