Willy Setup for MDM
Hello Gurus,
While configuring SMD setup for MDM system, i am getting following error, for MDIS and MDSS
[Wilyhost Agent] Failed to configure EP Agent for sapkrftmox01.krft.net (MDM Host)
My MDM system is not an EP system, strainge how am i getting this error related to EP.
Also in the Local SMD Agent Application log on MDM Host getting the error
[Thread[Thread-14,5,main]] Warning com.sap.smd.wily.hostagent.action.AbstractAction - run(): Action SAPOsCol not running because status is PERMANENT_ERROR
[Thread[Thread-23,5,main]] Warning com.sap.smd.wily.hostagent.action.SapOsColAction - launchDaemon(): launchDaemon: saposcol exited with -1
[Thread[ExecutionRunner_4,5,ExecMgrThreadGroup]] Warning com.sap.smd.wily.hostagent.destination.ProcessReader - readOutput: Error output: prtdiag can only be run in the global zone
Need the help...please....
Regards
Manoj
Hi
Implement SAP Note 1466312
Similar Messages
-
Hello Gurus,
While configuring SMD setup for MDM system, i am getting following error, for MDIS and MDSS
[Wilyhost Agent] Failed to configure EP Agent for sapkrftmox01.krft.net (MDM Host)
My MDM system is not an EP system, strainge how am i getting this error related to EP.
Also in the Local SMD Agent Application log on MDM Host getting the error
[Thread[Thread-14,5,main]] Warning com.sap.smd.wily.hostagent.action.AbstractAction - run(): Action SAPOsCol not running because status is PERMANENT_ERROR
[Thread[Thread-23,5,main]] Warning com.sap.smd.wily.hostagent.action.SapOsColAction - launchDaemon(): launchDaemon: saposcol exited with -1
[Thread[ExecutionRunner_4,5,ExecMgrThreadGroup]] Warning com.sap.smd.wily.hostagent.destination.ProcessReader - readOutput: Error output: prtdiag can only be run in the global zone
Need the help...please....
Regards
ManojHi,
Can you check your SAP OS Collector is running (SSAPOSCOL)?
What is your Solman version?
Thanks,
Pradeep -
Setup CTS+ for MDM 5.5
Hello ,
I have to configure Charms on MDM 5.5 . Can anyone please let me know whether there is a possibility of configuring CTS+ on MDM 5.5.
Please forward the Documents realted to Setup and use of CTS+ for MDM 5.5 .
Thanks in advance
Regards,
ReddiVrreddi,
Please refer this how to Guide for MDM 7.1,
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d0dd1ae0-36e5-2b10-f8b4-e6365e643c0b&overridelayout=true
Please check this for MDM 5.5. As per my knowledge, I think this Setup CTS + for MDM 5.5 is not available. So, I am afraid may be you have to Upgrade MDM Verson from MDM 5.5 to MDM 7.1.
Hope it will help you
Thanks,
Mandeep Saini -
Managed System Configuration Error for MDM 7.1 SP09
Greetings, Needed your expert advise. We are getting an error while configuring our MDM Servers (Version 7.1.08.196) in Solution Manager. As suggested in SAP Note 1798643 , I have manually filled the required details and transferred through sldreg.exe to SLD. Now when i try to perform Managed System Configuration, it is throwing the below error. The definition of Technical System '~MDM' is not correct: '~MDM': No Path found in Installed Technical System 'SID~MDM~'. I'm not sure how to manually update the Install Path for our MDM Servers. Since, the data to LMDB is automatically supplied, I might not be able to manually edit anything. Could you please advise if there is any step to solve this issue. Thanks, Haseeb Ahmed.
Dear ,
Haseeb,
I had the exact same problem with MDM managed system setup . I was on MDM 7.1 SP10.
1940337 - RCA template for Solution Manager 7.10 SP10
This note should resolve your problem. This note has the updated template for MDM.
It did for mine
Thanks
Amit -
How Are Your Controllers Setup for BYOD/Guest and OEA
I am in the process of building a new wireless network. The network will include BYOD/Guest and OEA for teleworkers using ICE and MobileIron for MDM. In the past I have setup an anchor controller for guest, but for this design I have a cost constraint that prevents me from adding the anchor controller. I know the Cisco SE’s push to include an anchor controller in the DMZ for this design, but I wanted an unbiased opinion from folks who may have a similar design and how your controllers are setup. For this design can I deploy a BYOD/Guest and OEA network without a DMZ controller?
Thanks in advance.
BretHi Bret,
You can use WLC with Cisco ISE.
Here is the full deployment guide:
http://www.cisco.com/image/gif/paws/113476/wireless-byod-ise-00.pdf
http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080bba10d.shtml
http://www.cisco.com/en/US/docs/solutions/Enterprise/Borderless_Networks/Unified_Access/BYOD_ISE.html
Hope it helps.
Regards
Dont forget to rate helpful posts -
MDM JAVA API SCA file for MDM 7.1 SP04
I need to download MDM JAVA API SCA file for MDM 7.1 SP04. When I added to the download basket through service marketplace it is looking for the approval process, just for the API file. I was able to get the other files though like webdynpro framework, change tracker. We haven't setup the Solution Manager yet. It might take a while. Meanwhile is there any other way to get the SCA file.
ThanksOpened message with SAP and they have approved the download basket. Now able to download the sca file.
-
been with apple for years. one itunes/appleID in use for family - all purchases and downloads on the one account..
now got 3 ipads, 3 iphones and when we update the software, we seem to get text/facetime issues due to multiple email addresses and phone numbers for the different devices that each individual uses. For example, I send a text and it appears to have come from my wife or son to the recipient. Not good !
there seems to be direction from apple that each of us should use our own apple id, thogh how do I link the accounts so enable family sharing of music/media we have purchased etc - Id also like to be able to review and keep a private eye on what my son downloads as he is 11 yrs old ! I manage this currently as we allow him access to the password for itunes (as we all use the same id today)
Am i better setting up accounts for my wife and son independent of my own, or not. Each of us would like access to the family content we have and the master library of synced content. I just want the most simplistic approach that apple, or others would recommend.
Is there a better or optimum setup for a family as we cannot be alone.....Thanks for the help, but a follow up question now.
My iPhone won't arrive for a little while, but my wife already got hers and she wants to set it up now. Using my Apple ID for the purchases, if she starts setting hers up, can she change her iCloud ID to something else quickly? It keeps telling us that we have to sign in with the AppleID first.
Should we just set up an iCloud account via normal internet before trying all this via iPhone? -
What is icloud setup for Multiple users, multiple devices in family?
What would be the recommended setup for iCloud to allow family members with multiple devices and multiple iTune accounts to share purchases, sync there own mail account, contacts, and reminders with multiple devices, and be able to sync calenders with all family calendars? Or better yet how can family members pick and choose what to sync with a common iCloud account?
I'd like to know this to.
We have 1 mac mini that serves as a media station that streams audio to Zeppelin air and photos & movies to our TV.
My wife buys music on her iPhone. And takes pictures of the family.
I buy apps and music on my iPad. And make movies of the family.
I have a macbook pro ( itunes with home sharing, iphoto home sharing ).
She has a nice macbook ( itunes with home sharing, iphoto home sharing ).
What we would want is that the mac mini collects all music / videos / media and streams it to all our apple devices via wifi ( not via internet ). But I with my appleID and she with her appleID.
I wonder is Apple can make an GUInterface that I can understand to solve this.
This iCloud seems not too suited.
For families it would be easier if iOS5 would have 'home sharing' with upload and not transfer everything to CA first. -
VPN Client and Setup for RV042
Is there a definitive setup for a small VPN using the RV042?
Situation is 2 remote users wish to get access to a non server (W7P) pc to access files.
The end point doesn't have a static IP but I've put in a DYNDNS.org so it reports back the IP and I can access the router at least from outside.
I can setup VPN users but is there more to do?
Wish to use QVPN client or advise alternative.
Appreciate all input.
Thanks
BruceBruce,
QuickVPN normally works well for what you wish to do. Make sure that the Windows Firewall is ON in Windows 7 and Windows Vista clients. Turn off all antivirus and third party firewall software as well at least until you have verified that you have a successful connection. It is very easy to set up, just create a username and password in the router. If you run into trouble, post here or call your local Small Business Support Center:
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html -
Unable to configure Mail setup for SMTP : Please Help
Hi experts,
I have been trying since 2 weeks with most of the links like help.sap.com, and other links which experts are sugested, but then also I am uable to configure the mail setup for a SMTP server from SAP R/3 4.7EE.
Couls anyone help me please,
Challenge: I want to send mails from SAP system to other internet servers or mail servers.
SMTP server is installed,
SAP R/3 4.7ee is in place.
I request you experts please provide the exact step by step procedure to configure, so that I should not run behind the links.
Thanks in advance,
SunilHi Juan, Hi Juan,
Thanks for your reply, I am happy that one big hope has come. regarding my issue its starts from the SCOT configuration, I have created the Node, and under support address types selected INTERNET type.
Under INTERNET settings
address area = *mail
have not mentiond RFC destination.
Hope this info will guide you my issue.
Thanks in advance,
Sunil -
ICloud setup for Family to only share Apps
Okay, so I've tried reading through several different articles to figure this out but I'm not getting anywhere so I'm hoping there's somewhere here with a similiar setup that can just give the basic setup. So here's what I want to do, I want to be able to setup icloud on each of my families devices so they are backed up into their own accounts but I also want to make sure that App's are shared across the devices. Here's the setup that I have:
1. For Myself I have an iPhone and a iMac
2. My wife has an iPhone and a Macbook
3. My son has a iPad
Now right now everyone is linked up to my Apple ID since that's the account in which all the Apps are purchased and the billing information is linked up to. I want to setup each device with an icloud account as well so our informaiton can be backed up but I don't want information crossed over between devices (for example I don't want all the contacts from my wife's phone on my phone nor do I want our messages sharted on my son's iPad). I'm not sure on how I can go about this since right now each device is hooked up to my Apple ID (so we can use the Find my iPhone app as well for each device) so I don't know if I create a separate account for everyone if that will still work or if I need to know each login and password. I also want to setup a icloud e-mail account that I can use for the iMac and my iPhone only, and the same setup for my wife and her Macbook. Any help would be great, thanks.To avoid sharing and merging your iCloud data, you will need to put each person's devices on a separate iCloud account with a separate ID. You can continue to all share the same ID for iTunes; it does not need to be the same as the ID you use for iCloud.
Creating separate accounts will keep everyone's iCloud data separated, and give each person's devices their own 5GB of free storage for their device backups, and a separate iCloud email account/address. However, Find My iPhone (iPad, iPod, Mac) is tied to the iCloud ID so they cannot be tracked together on the same map. You will have to sign into each iCloud account separately (on icloud.com or the Find My iPhone app) in order to locate devices using that iCloud ID. -
SSL Certificate setup for Web/Address Book/iCal in 10.7 Lion?
I know nothing about certificates. I plan to use my Mini server to help manage my family's computers which are pretty spread out across the U.S. My plan is to use profile manager for device management, host a couple websites (one secure for home security cams) and share address books and calendars. This is as much a geek gadget project as it is "useful" so I understand I may be creating some work for myself
Anyway, can someone walk me through the correct setup for certificates? My research is showing me a LOT of options/parameters. Due to the expense, i don't want to create one just to find it won't serve my purposes.
Also, I think i'm going with RapidSSL...$50 is the cheapest I've come across...hopefully the offer what I need?I have just spent 30 minutes on the phone to a pleseant chap in Athens, and now have a solution.
We tried several options and the final one worked - so simple.
Click on the apple symbol > system preferences > iCloud > disable contact sync > keep contacts
Check search, in my case it worked for the first time in several weeks :-)
then re-enable contact sync as follows:
Click on the apple symbol > system preferences > iCloud > re-tick contacts > merge contacts
Search still works
Hallelujah! -
Office 2013 RMS Client Configuration - Your Machine is not setup for IRM
Hi All,
I have successfully setup a test AD RMS farm but stuck at trying to configure Office 2013 to work with this. The farm configuration is as below
DC: Windows 2003
AD RMS Server: Windows 2008/ SQL Server 2008 R2
Client: Windows 7 64 bit with Office 2013 32 bit, Domain Joined
Client is domain joined and SCP has been successfully registered ( I can see the SCP in AD RMS properties).
When I open word and select Protect Document -> Restrict Access, the only option is to Connect to RMS Server and get template, which eventually gives an error
Your Machine isn't setup for Information Rights Management (IRM). To set up IRM, sign in to office, open an existing IRM protected message or document, or contact your help desk.
Surprisingly, when I open a document protected by IRM (from a different machine), IRM is automatically configured for the user and starts working from that point. However any new domain user login into this client faces the same issue.
Can anyone help identify the required registry keys that need to be present for getting this working on the client.
Thanks for your help
AnujHi Manoj,
To install Microsoft Deployment Agent, you must be a member of the Windows
Administrators security group on the computer where you will install it. You must also be a member of the
Release Manager role in Release Management.
From the log, the user you‘re using seems not in the local administrator group. Please make sure the corresponding users has the needed permissions to install the deployment agent. Please check this
page for more information about installation of deployment agent. If you have any other issues, please elaborate more details about your scenario.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Can multiple orgs be setup for one account?
Hi,
Is it possible to have multiple organizations setup for the one account? This is in a sales/campaigns context.
Thanks.If you are referring to linking a customer account to multiple parties I don't think it is possible.
-
Entry Channel setup for multiple company codes
Hello,
I have a question regarding the entry channel setup (for external requirements in the Plan-Driven Procurement scenario)
In previous implementations, I 've created an entry channel below each company code (as the documentation says it should be). Now, for each entry channel, there was a EBP user assigned, which corresponded to an RFC entry in the backend system (I was connecting EBP to multiple backend systems)
Now, what should I do in the following scenario?:
1. SRM is only connected to one backend system
2. There are 50 company codes
Does that mean I have to create 50 users (for each channel) plus 50 RFC connections in the R/3 system (each with a different user in the backend system), pointing to the same SRM system?
I was thinking of creating an Org iD in the SRM structure at the top (which would be the entry channel), assign only ONE user to it and then fill attribute BUK with all the company codes. However, I don't know if this will work, because the external requirement process might need the company code defined in the "Function" tab... =/
Any help would be greatly appreciated.
Regards,
Gilberto.Hi Proyecto Genesis,
I am also configuring the Entry channel (org unit) for multiple company codes.
I tried your logic of defining the entry channel outside company code level. Assigned the BUK attribute and extended attribute for plants and storage locations.
Also in my case the local Pur org and Pur group is defined outside the company code. Is it correct?
However the system fails to transfer the external requisition to SRM.
SLG1 displays following error message.
"No address found for partner function type Ship-To Address"
So if I move the Entry channel (org unit) under any one company code level then the external requisitions are transferred correctly to SRM.
But then the issue is the requirements are not transferred with the backend Pur Org and Pur grp. Instead they are transferred to the Pur Org and Pur grp of the company code under which the entry channel is defined.
Can you please share how do we need to define the entry channel, local pur org and pur grp for multiple company codes scenario, so that the ECC requisitions are transferred with the correct company code, pur org and pur grp to SRM?
Or do we need to define Entry channel for each company code and RFC user actually mapping the same backend system?
Please guide.
Regards,
Sandeep
Maybe you are looking for
-
I'm trying to install SCOM and in order to do that I need to have SQL Report Viewer 2012 installed. When I'm trying to install this, I am prompted to install SLQ CLR Types for SQL Server 2012. i've downloaded and installed this and I get the exact s
-
Delivery date in shopping cart
While creating a shopping cart, delivery date displayed is the current date.It is not taking into consideration the planned delivery time maintained in the material master in backend R/3
-
This row was changed by somebody else. (WWV-03312)
This row was changed by somebody else. (WWV-03312) I have checked the notes related with this error in metalink. None of then could resolve this issue. I built a portal form based on a table in the remote Db. Basically created a synonym thru a public
-
when i press clear recent history button in the tools menu i get the following error i wanted to report that issue the message is "A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue
-
I need to evaluate future possibilities for web applications using CRM. We are currently on CRM4.0 and was wondering at what version of CRM will WebDynpro for ABAP be available. Does anyone know the answer to this ? Or any other options excluding BSP