Wily Instroscope Agent connection problem to Enterprise Manager

Hello!
Perhapse some of you guys deal with this problem before and can give me an hint?
I install the Wily Introscope Enterprise Manager and one Agent according to the "Introscope Version 7.0 Installation Guide for SAP" but if i try to start the agent i get the Warning: [IntroscopeAgent.ConnectionThread] Failed to connect to the Introscope Enterprise Manager at <server>:6001, com.wily.isengard.postofficehub.link.net.DefaultSocketFactory (1)
I checked if the server is reachable with ping and also if the port is open via telnet from the system where i have installed the Agent.
Any ideas?
King regards, Stefan

Hi Jens, thank you for your answer, yes i tried to use the ip adress instead, with the same result.
Very strange from my point of view is the thing that i can't get a telnet connection if i try to connect to from the enterprise manager server to the agent server. This look like a network issue to me, dosen't it? in the other direction there is no problem and on the enterprise manager server i see that listening on 6001 is on. If I check this on the agent machine, i can't see anybody listening on this port. But from my point of view it should?
Webview isn't in place right yet, i thougt i should finish the "normal" configuration first?
Regards, Stefan

Similar Messages

Wilyhost Agent could connect to the Enterprise Manager

Hi Gurus,
I'm trying to setup Diagnostic for Solman 7.0. I'd installed Wily Introscope and SDM Agent in Solution Manager. The Agent was configured for this server. The Application Agent in Diagnostic Setup -> Managed system was OK, but when I try to run the Setup Wizard for Self-Monitoring, every steps are in green (OK) but the first was in red with this error:
Step Wilyhost Agent Details
Created destination SM1_DVEBMGS00_server0
Created destination SM1|qfmasr003_SM1_00
Created action SAP GC|SM1_DVEBMGS00_server0 - SAP GC|SM1_DVEBMGS00_server0
Created action SM1 - SM1 AbapSystem
Created action SM1|qfmasr003_SM1_00 - SM1|qfmasr003_SM1_00 AbapInstance
Created 3 action(s).
0 Wilyhost Agent(s) and 0 EP Agent(s) from host qfmasr003 are connected to the EM.
Wilyhost Agent configuration finished without errors, but on Enterprise Manager (qfmasr003.xxxxxxxx.com:6000) no Wilyhost Agent was detected from host qfmasr003. Please check the log file jvm_smdagent.out whether the Wilyhost Agent could connect to the Enterprise Manager. If the Enterprise Manager configuration has been changed recently please restart the SMD Agent on OS level.
The file jvm_smdagent.out said this:
LoadBalanceRestricted=no
P4ClassLoad=P4Connection
SAPDBHOST=
SAPINFO=SMD_98_server
SAPMYNAME=qfmasr003_SMD_98
SAPSTARTUP=1
SAPSYSTEM=98
SAPSYSTEMNAME=SMD
application.home=/usr/sap/SMD/exe
file.encoding=UTF-8
file.encoding.pkg=sun.io
file.separator=/
j2ee.dbhost=
java.awt.graphicsenv=sun.awt.X11GraphicsEnvironment
java.awt.printerjob=sun.print.PSPrinterJob
java.class.path=/usr/sap/SMD/exe/jstartup.jar:/usr/sap/SMD/exe/jvmx.jar:../../exe/jstartupapi.jar:../../exe/jstartupimpl.jar:lib/patch_7.00.15.20080806065909/launcher/smdagentlauncher.jar
java.class.version=48.0
java.endorsed.dirs=/j2sdk1.4.2_17/jre/lib/endorsed
java.ext.dirs=/j2sdk1.4.2_17/jre/lib/ext
java.home=/j2sdk1.4.2_17/jre
java.io.tmpdir=/tmp
java.library.path=/j2sdk1.4.2_17/jre/lib/i386/server:/j2sdk1.4.2_17/jre/lib/i386:/j2sdk1.4.2_17/jre/../lib/i386:/usr/sap/SMD/exe:/tmp/sapinst_exe.18845.1222346568:/usr/sap/SMD/exe:/usr/sap/SMD/exe:/usr/sap/SMD/exe
java.runtime.name=Java(TM) 2 Runtime Environment, Standard Edition
java.runtime.version=1.4.2_17-b06
java.specification.name=Java Platform API Specification
java.specification.vendor=Sun Microsystems Inc.
java.specification.version=1.4
java.util.prefs.PreferencesFactory=java.util.prefs.FileSystemPreferencesFactory
java.vendor=Sun Microsystems Inc.
java.vendor.url=http://java.sun.com/
java.vendor.url.bug=http://java.sun.com/cgi-bin/bugreport.cgi
java.version=1.4.2_17
java.vm.info=mixed mode
java.vm.name=Java HotSpot(TM) Server VM
java.vm.specification.name=Java Virtual Machine Specification
java.vm.specification.vendor=Sun Microsystems Inc.
java.vm.specification.version=1.0
java.vm.vendor=Sun Microsystems Inc.
java.vm.version=1.4.2_17-b06
jstartup.debuggable=yes
jstartup.mode=JCONTROL
jstartup.ownHardwareId=G1082288837
jstartup.ownProcessId=1666
jstartup.whoami=server
line.separator=
memory.manager=128M
os.arch=i386
os.name=Linux
os.version=2.6.9-5.ELsmp
path.separator=:
sun.arch.data.model=32
sun.boot.class.path=/j2sdk1.4.2_17/jre/lib/rt.jar:/j2sdk1.4.2_17/jre/lib/i18n.jar:/j2sdk1.4.2_17/jre/lib/sunrsasign.jar:/j2sdk1.4.2_17/jre/lib/jsse.jar:/j2sdk1.4.2_17/jre/lib/jce.jar:/j2sdk1.4.2_17/jre/lib/charsets.jar:/j2sdk1.4.2_17/jre/classes
sun.boot.library.path=/j2sdk1.4.2_17/jre/lib/i386
sun.cpu.endian=little
sun.cpu.isalist=
sun.io.unicode.encoding=UnicodeLittle
sun.java2d.fontpath=
sun.os.patch.level=unknown
sys.global.dir=/usr/sap/SMD/SYS/global
user.country=US
user.dir=/usr/sap/SMD/J98/SMDAgent
user.home=/home/smdadm
user.language=en
user.name=smdadm
user.timezone=
Running SMD Agent ...
[Runtime] START
==> Loading application com.sap.smd.agent.application.runtime : 7.0015.20080806065229.0000
==> Loading application com.sap.smd.agent.application.global.configuration : 7.0015.20080806065229.0000
==> Loading application com.sap.smd.agent.application.connectors : 7.0015.20080806065229.0000
==> Loading application com.sap.smd.agent.application.wily : 7.0015.20080806065229.0000
==> Loading application com.sap.smd.agent.application.filesystem : 7.0015.20080806065229.0000
==> Loading application com.sap.smd.agent.application.tracing : 7.0015.20080806065229.0000
==> Loading application com.sap.smd.agent.application.remotesetup : 7.0015.20080806065229.0000
==> Loading application com.sap.smd.agent.application.wilyhost : 7.0015.20080806065229.0000
10/14/08 01:13:55 PM ARST [INFO] [IntroscopeAgent] Introscope Agent Release 7.2.0.0 (Build 540138)
10/14/08 01:13:55 PM ARST [INFO] [IntroscopeAgent] Using Java VM version "Java HotSpot(TM) Server VM 1.4.2_17" from Sun Microsystems Inc.
10/14/08 01:13:55 PM ARST [INFO] [IntroscopeAgent] Trying to load agent profile based on system property "com.wily.introscope.agentProfile"
10/14/08 01:13:55 PM ARST [INFO] [IntroscopeAgent] Trying to load file from ./applications.config/com.sap.smd.agent.application.wilyhost/IntroscopeSapAgent.profile
10/14/08 01:13:55 PM ARST [INFO] [IntroscopeAgent] Loaded file from ./applications.config/com.sap.smd.agent.application.wilyhost/IntroscopeSapAgent.profile
10/14/08 01:13:55 PM ARST [INFO] [IntroscopeAgent] Looking for agent profile property "introscope.agent.extensions.directory" to locate the extensions directory.
10/14/08 01:13:55 PM ARST [INFO] [IntroscopeAgent] The agent extension property "introscope.agent.extensions.directory" is not set. No extensions will be loaded.
10/14/08 01:13:55 PM ARST [INFO] [IntroscopeAgent] Introscope Agent startup complete.
10/14/08 01:13:55 PM ARST [INFO] [IntroscopeAgent] The Agent will attempt to determine its name.
10/14/08 01:13:55 PM ARST [INFO] [IntroscopeAgent] Using the Agent name "SAP HostAgent J98" based on the value of the System Property "com.wily.introscope.agent.agentName".
10/14/08 01:13:55 PM ARST [INFO] [IntroscopeAgent] Initial agent name set to SAP HostAgent J98
10/14/08 01:13:55 PM ARST [INFO] [IntroscopeAgent.Isengard] Initiating connection attempts to the Introscope Enterprise Manager.
10/14/08 01:13:55 PM ARST [INFO] [IntroscopeAgent.Isengard] The Agent reconnection delay is set to 15 second(s).
10/14/08 01:13:57 PM ARST [INFO] [IntroscopeAgent.IsengardServerConnectionManager] Connected Agent to the Introscope Enterprise Manager at qfmasr003.quickfood.com.ar:6000,com.wily.isengard.postofficehub.link.net.DefaultSocketFactory. Host = "qfmasr003", Process = "SAP HostAgent Process", Agent Name = "SAP HostAgent J98".
10/14/08 01:13:57 PM ARST [INFO] [IntroscopeAgent] Remote Agent Configuration Service is enabled
==> Loading application com.sap.smd.agent.application.logviewer : 7.0015.20080806065229.0000
==> Loading application com.sap.smd.agent.application.flightrecorderdumpscan : 7.0015.20080806065229.0000
==> Loading application com.sap.smd.agent.application.telnet : 7.0015.20080806065229.0000
==> Loading application com.sap.smd.agent.application.database : 7.0015.20080806065229.0000
==> Loading application com.sap.smd.agent.application.datacollector : 7.0015.20080806065229.0000
Initialization done.
[ms://qfmasr003.xxxxxxxxxxxxxxxxxx:8101/P4] Agent ready.
==> Loading application com.sap.smd.agent.application.remoteos : 7.0015.20080806065229.0000
only Initial Configuration files will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only file configuration information will be considered
Warning: ConfigStore [cfg/kernel/ThreadManager.properties][J2EE] has already been defined with another alias.
Warning: ConfigStore [cfg/kernel/ClusterManager.properties][J2EE] has already been defined with another alias.
Warning: ConfigStore [cfg/kernel/ClusterManager.properties][J2EE] has already been defined with another alias.
Warning: ConfigStore [cfg/kernel/ServiceManager.properties][J2EE] has already been defined with another alias.
Warning: ConfigStore [cfg/kernel/ThreadManager.properties][J2EE] has already been defined with another alias.
Warning: ConfigStore [cfg/kernel/ThreadManager.properties][J2EE] has already been defined with another alias.
Warning: ConfigStore [cfg/kernel/ClusterManager.properties][J2EE] has already been defined with another alias.
Warning: ConfigStore [cfg/kernel/ClusterManager.properties][J2EE] has already been defined with another alias.
Warning: ConfigStore [cfg/kernel/ServiceManager.properties][J2EE] has already been defined with another alias.
Warning: ConfigStore [cfg/kernel/ThreadManager.properties][J2EE] has already been defined with another alias.
only Abap configuration will be considered
only Abap configuration will be considered
only file version information will be considered
only End2End log files will be considered
only software change logs will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
10/15/08 01:16:17 PM ARST [WARN] [IntroscopeAgent.IsengardServerConnectionManager] The Introscope Agent is sending data to the Introscope Enterprise Manager too slowly. Keeping the connection alive.
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only file configuration information will be considered
Warning: ConfigStore [cfg/kernel/ThreadManager.properties][J2EE] has already been defined with another alias.
Warning: ConfigStore [cfg/kernel/ClusterManager.properties][J2EE] has already been defined with another alias.
Warning: ConfigStore [cfg/kernel/ClusterManager.properties][J2EE] has already been defined with another alias.
Warning: ConfigStore [cfg/kernel/ServiceManager.properties][J2EE] has already been defined with another alias.
Warning: ConfigStore [cfg/kernel/ThreadManager.properties][J2EE] has already been defined with another alias.
Warning: ConfigStore [cfg/kernel/ThreadManager.properties][J2EE] has already been defined with another alias.
Warning: ConfigStore [cfg/kernel/ClusterManager.properties][J2EE] has already been defined with another alias.
Warning: ConfigStore [cfg/kernel/ClusterManager.properties][J2EE] has already been defined with another alias.
Warning: ConfigStore [cfg/kernel/ServiceManager.properties][J2EE] has already been defined with another alias.
Warning: ConfigStore [cfg/kernel/ThreadManager.properties][J2EE] has already been defined with another alias.
only Abap configuration will be considered
only Abap configuration will be considered
only file version information will be considered
only End2End log files will be considered
only software change logs will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only End2End log files will be considered
only Initial Configuration files will be considered
This error is the same, when I try to connecto other system for Diagnostics,
Any comments, suggestions, recomendations.... anythings.....
Thanks in advice,
Sergio Mazzeo.

Hi Sergio,
did you already stop and start your SMD agent on OS level ? It is not enough to restart it from the SMD.
kind regards
Davy

How to Connect SQL Server enterprises Manager Version 8.0 with Form 6i

Dear experts
I want to know that How can I connect SQL server Enterprise Manager Version 8.0 with Forms/reprots 6i.
currently I have oracle 9i database at server windows 2003 and I also connected with client (my PC) I work on server.
I also have SQL server in that server 2003 machine and this SQL Server also work with other clients that have VB program.
I want to know that can I connect with this SQL server with Form 6i?

You can't. The closest thing would be to create links in an oracle database to the SQL Server database using Heteregeneous Services and connect forms to the that.
This forum is for the SQLDeveloper tool. You will get more complete answers in the "Database General", or "Heterogeneous Services" forums

Web.xml problem in Enterprise Manager 10g

I got an error while deploying to Enterprise Manager 10g
My platform: Windows XP
OC4J 9.0.4
Enterprise Manager 10g
And I even have the web.xml in the correct directory. i.e
cpd.ear
./META-INF/application.xml
./cpd-ejb.jar/WEB-INF/web.xml
./cpd-webapp.war/WEB-INF/web.xml
./cpd-webapp.war/WEB-INF/classes
The error I get while deploying on a Enterprise Manager 10g is:
Invalid J2EE application file specified - Jar file: :\WINNT\TEMP\jar47575.tmp is missing its standard xml descriptor located at WEB-INF/web.xml
Incidently the *.ear file built by my fellow's machine is deploying perfectly. I've compared the directories n useful files of both the *.ears down to the very last bit n they are the same.
I can imagine that guys with only high IQ can solve this mystery

The above message is a duplicate of another message by Sim.
web.xml problem in Enterprise Manager 10g

Problems with Enterprise Manager Oracle 10gR2

Hi,
The installation of 10gR2 on Windows 2000 seems to work.
I only have a problem with web enterprise manager.
I can connect to the database correctly and I can manage the database (creating tables, users and so on).
The only problem is in the first page (home) of the database, accessing with the web enterprise manager.
In fact I get this "error: java.lang.Exception: IOException in sending Request :: Connection refused", but I however access the db.
I verified the DBSNMP user and it's active.
Did someone get the same error?
Excuse if I'm repeating a previous post, but I received answers about linux environment only (I have Windows 2000 server, instead).
thanks a lot,
Francesco

We have in fact seen the same error. In our case, it appeared after the network guys moved the Oracle server from one domain to another. (This is not an action that I highly recommend, by the way.)
I used emca to delete the Enterprise Manager agent and recreate it. For a single instance server not in a cluster or on a grid, the commands look like this:
emca -deconfig dbcontrol db
emca -config dbcontrol db
That worked just fine. However, we started getting an "account locked" error when the Enterprise Manager started. And the result is the same as you described. The account is not locked by any means. If you ignore what you see on the screen about an error, you can go on and administer the database just fine. It's just when you get back to the home screen, it tells you that your account is locked and you are not in touch with the instance.
I can make the error go away for awhile by stopping and starting the agent with
emctl stop dbconsole
emctl start dbconsole
But the error comes back in a little while.
We don't consider it a show stopper, since the database performs normally. It's just one of those things you wish it would not do.

Problems with Enterprise Manager 10g

Greetings!
We have 3 databases up and running fine so far. Yesterday I mentioned that the Enterprise Manager for one of the databases is not reachable, although it is up and I can connect to it with SqlPlus. So I checked emctl and it is up and running, and the port I use is also right. Has anyone an idea what I could do in addition to get EM working again? I only have these problems with one db, all others are working great.
best regards,
Jörn

Hi there,
here is the status of the dbconsole and the agent:
emctl status dbconsoleTZ set to Europe/Berlin
Oracle Enterprise Manager 10g Database Control Release 10.2.0.3.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
http://orahost.fzh:1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is running.
Logs are generated in directory /u01/app/oracle/product/10.2.0/db/orahost.fzh_kms/sysman/log
emctl status agentTZ set to Europe/Berlin
Oracle Enterprise Manager 10g Database Control Release 10.2.0.3.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Agent Version : 10.1.0.5.1
OMS Version : 10.1.0.5.0
Protocol Version : 10.1.0.2.0
Agent Home : /u01/app/oracle/product/10.2.0/db/orahost.fzh_kms
Agent binaries : /u01/app/oracle/product/10.2.0/db
Agent Process ID : 23765
Parent Process ID : 21612
Agent URL : http://orahost.fzh:3938/emd/main
Started at : 2008-02-11 12:23:39
Started by user : oracle
Last Reload : 2008-02-11 12:23:39
Last successful upload : 2008-02-14 08:25:48
Total Megabytes of XML files uploaded so far : 27.19
Number of XML files pending upload : 0
Size of XML files pending upload(MB) : 0.00
Available disk space on upload filesystem : 52.00%
Agent is Running and Ready
I restartet the agent and the dbconsole without any success. I still cannot reach the EM for the second DB. Any other suggestions?
best regards,
Jörn

Installation problem with Enterprise Manager Console

When i am installing 10G database installation was failed at configuring DBConsole. later from OUI(Oracle Universal Installer) i uninstalled Enterprise Manager Console. my Question was how to reinstall the Enterprise Manager Console alone?
When i am trying to install from OUI. it is not allowing me to install Enterprise Mager Alone (stating Database is mandatory) .
for more information on dbconsole failure you can refer following log file
Sep 27, 2007 3:22:28 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\oracle1\product\10.2.0\db_1\cfgtoollogs\dbca\Embarq\emConfig.log.
Sep 27, 2007 3:22:28 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'CHECK_CONFIG' set to true
Sep 27, 2007 3:22:28 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
Sep 27, 2007 3:22:33 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:33 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: DBSNMP
Sep 27, 2007 3:22:34 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:34 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Sep 27, 2007 3:22:34 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'asm_db' set to false
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.DatabaseChecks getDbServiceName
CONFIG: No service name available. Will try to set db_unique_name.db_domain
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value:
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
CONFIG: No Database unique name available. Will try to retrieve it from DB itself
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: Embarq
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: Embarq
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: SERVICE_NAME value: Embarq
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBID.
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.DatabaseChecks getDbid
CONFIG: No dbid available. Will query db to extract it.
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
Sep 27, 2007 3:22:35 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:36 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBID value: 1923985629
Sep 27, 2007 3:22:36 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYSMAN
Sep 27, 2007 3:22:36 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:36 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:22:39 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:22:40 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.DatabaseChecks performReposChecks
WARNING: 'shared_pool_size' must be greater than or equal to 80 MB.
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.EMDBPreConfig invoke
CONFIG: Passed repository configuration check
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter GLOBAL_DB_UNIQUE_NAME.
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.DatabaseChecks getGlobalDbUniqueName
CONFIG: No Global database unique name available. Will try to retrieve it from DB itself
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: GLOBAL_DB_UNIQUE_NAME value: Embarq
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties to D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties.emca.tmp
Sep 27, 2007 3:22:41 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties has been copied to D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties.emca.tmp
Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties.emca to D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties
Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties.emca has been copied to D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties
Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml to D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml.emca.tmp
Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml has been copied to D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml.emca.tmp
Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_RECONFIG' set to false
Sep 27, 2007 3:22:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: Embarq Host: H1B-6F175-9JVJ.GDNINDIA.COM Node: null OH: D:\oracle1\product\10.2.0\db_1 agentHome: null isCentral: false
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: Embarq Host: H1B-6F175-9JVJ.GDNINDIA.COM Node: null OH: D:\oracle1\product\10.2.0\db_1 isDBC: false
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_CONFIGURED' set to false
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_DBCONTROL_CONFIGURED' set to false
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Sep 27, 2007 3:22:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:22:44 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Sep 27, 2007 3:22:44 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: Embarq Host: H1B-6F175-9JVJ.GDNINDIA.COM Node: null OH: D:\oracle1\product\10.2.0\db_1 isDBC: false
Sep 27, 2007 3:22:44 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter PORTS_FILE.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_Embarq.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_Embarq.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_Embarq.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_Embarq.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to D:\oracle1\product\10.2.0\db_1\oui
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Homes to scan for used ports: [D:\oracle1\product\10.2.0\db_1]
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME D:\oracle1\product\10.2.0\db_1
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking JMS port: null from D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking RMI port: null from D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking HTTP port: null from D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager getAgentPort
CONFIG: Cannot parse EMD_URL correctly. No port identified
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking Agent port: null from D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Cannnot parse EMD_URL correctly. No port identified
Sep 27, 2007 3:22:45 PM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file D:\oracle1\product\10.2.0\db_1\install\staticports.ini
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.util.PortManager getFreePorts
CONFIG: D:\oracle1\product\10.2.0\db_1:H1B-6F175-9JVJ.GDNINDIA.COM:null:Embarq:{}:null:{DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_Embarq.
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: AGENT_PORT_Embarq value: 3938
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_Embarq.
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBCONTROL_HTTP_PORT_Embarq value: 1158
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_Embarq.
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: JMS_PORT_Embarq value: 5540
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_Embarq.
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: RMI_PORT_Embarq value: 5520
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.EMDBPreConfig getFreePorts
CONFIG: Ports assigned for SID: Embarq : {DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
Sep 27, 2007 3:22:46 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:47 PM oracle.sysman.emcp.EMReposConfig invoke
CONFIG: Successfully granted priviliges to dbsnmp.
Sep 27, 2007 3:22:47 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYS
Sep 27, 2007 3:22:47 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:22:47 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: Unlocking dbsnmp and sysman
Sep 27, 2007 3:22:48 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: Unlocked mgmt_view account
Sep 27, 2007 3:22:48 PM oracle.sysman.emcp.EMReposConfig invoke
CONFIG: Successfully unlocked relevant accounts
Sep 27, 2007 3:22:48 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: Embarq, oracleHome: D:\oracle1\product\10.2.0\db_1, and user: SYSMAN
Sep 27, 2007 3:22:49 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Sep 27, 2007 3:23:07 PM oracle.sysman.emcp.EMReposConfig createOutOfBoxJobs
CONFIG: Finished executing emreposoutofbox.sql
Sep 27, 2007 3:23:07 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.EMDBCConfig updateEmomsProps
CONFIG: Updating file D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties ...
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties.emca to D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\sysman\config\emoms.properties
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\server.xml.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\server.xml
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.EMDBCConfig copyOC4JDir
CONFIG: Copying OC4J config files from D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.FileUtil _makeDirectory
CONFIG: Create directory D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\application.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\application.xml
Sep 27, 2007 3:23:08 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\data-sources.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\data-sources.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\global-web-application.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\global-web-application.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\http-web-site.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\http-web-site.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\internal-settings.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\internal-settings.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\java2.policy to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\java2.policy
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\jazn-data.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\jazn-data.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\jazn.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\jazn.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\jms.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\jms.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\mime.types to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\mime.types
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\oc4j-connectors.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\oc4j-connectors.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\principals.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\principals.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\rmi.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\rmi.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\config\server.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\server.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _makeDirectory
CONFIG: Create directory D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\META-INF
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\META-INF\MANIFEST.MF to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\META-INF\MANIFEST.MF
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _makeDirectory
CONFIG: Create directory D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\application-deployments\default\defaultWebApp
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole\application-deployments\default\defaultWebApp\orion-web.xml to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\application-deployments\default\defaultWebApp\orion-web.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.EMDBCConfig copyOC4JDir
CONFIG: Finished copying OC4J config files
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\jms.xml.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\jms.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\rmi.xml.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\rmi.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\http-web-site.xml.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\config\http-web-site.xml
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.EMAgentConfig updateEmdProps
CONFIG: Updating file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties ...
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties.emca to D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.EMAgentConfig updateAgentConfigFiles
CONFIG: Updating file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties ...
Sep 27, 2007 3:23:09 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:10 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:10 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:10 PM oracle.sysman.emcp.ParamsManager getLocalListener
CONFIG: Using specified listener name: LISTENER
Sep 27, 2007 3:23:10 PM oracle.sysman.emcp.EMAgentConfig updateAgentConfigFiles
CONFIG: Updating file D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml ...
Sep 27, 2007 3:23:10 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:11 PM oracle.sysman.emcp.EMAgentConfig instantiateEMConfigFiles
CONFIG: Local host name: H1B-6F175-9JVJ.GDNINDIA.COM
Sep 27, 2007 3:23:11 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Sep 27, 2007 3:23:11 PM oracle.sysman.emcp.util.PlatformInterface getSortedEnvArray
CONFIG: New Env List: [COMPUTERNAME=H1B-6F175-9JVJ, NEED_EXIT_CODE=1, ORACLE_SID=Embarq, PATH=D:\oracle1\product\10.2.0\db_1\jdk\jre\bin\server;D:\oracle1\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Support Tools\;d:\data\notes;c:\program files\notes, SystemRoot=C:\WINDOWS, TZ=, WINDIR=C:\WINDOWS]
Sep 27, 2007 3:23:11 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Starting execution: CMD /C D:\oracle1\product\10.2.0\db_1\bin\emctl.bat deploy dbconsole D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq H1B-6F175-9JVJ.GDNINDIA.COM:3938 H1B-6F175-9JVJ.GDNINDIA.COM Embarq
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Exit value of 0
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Execution of CMD /C D:\oracle1\product\10.2.0\db_1\bin\emctl.bat deploy dbconsole D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq H1B-6F175-9JVJ.GDNINDIA.COM:3938 H1B-6F175-9JVJ.GDNINDIA.COM Embarq completed successfully
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Creating shared install...
Source location: D:\oracle1\product\10.2.0\db_1
Destination (shared install) : D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq
DeployMode : dbconsole
Creating directories...
Setting console properties ...
Setting log and trace files locations for Console ...
Setting log and trace files locations for Agent ...
Service "OracleDBConsoleEmbarq" create SUCCESS
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\sysman\config\emoms.properties.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\sysman\config\emoms.properties
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\sysman\config\emd.properties.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\sysman\config\emd.properties
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\sysman\config\emd.properties.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq\sysman\config\emd.properties
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface getSortedEnvArray
CONFIG: New Env List: [LD_LIBRARY_PATH=D:\oracle1\product\10.2.0\db_1\lib32;D:\oracle1\product\10.2.0\db_1\lib;D:\oracle1\product\10.2.0\db_1\perl\lib;null, PERL5LIB=D:\oracle1\product\10.2.0\db_1\sysman\admin\scripts;D:\oracle1\product\10.2.0\db_1\bin;]
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Starting execution: D:/oracle1/product/10.2.0/db_1/perl/5.8.3/bin/MSWin32-x86-multi-thread\perl.exe D:\oracle1\product\10.2.0\db_1\bin\targetdeploy.pl D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq H1B-6F175-9JVJ.GDNINDIA.COM Embarq
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Exit value of 0
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Execution of D:/oracle1/product/10.2.0/db_1/perl/5.8.3/bin/MSWin32-x86-multi-thread\perl.exe D:\oracle1\product\10.2.0\db_1\bin\targetdeploy.pl D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq H1B-6F175-9JVJ.GDNINDIA.COM Embarq completed successfully
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Creating targets.xml in state directories...
Source location: D:/oracle1/product/10.2.0/db_1
Destination : D:\oracle1\product\10.2.0\db_1\H1B-6F175-9JVJ.GDNINDIA.COM_Embarq
Creating directories...
Creating targets.xml...
Done.
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.EMAgentConfig instantiateEMConfigFiles
CONFIG: Successfully deployed state dirs for H1B-6F175-9JVJ.GDNINDIA.COM
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.EMAgentConfig performConfiguration
CONFIG: Successfully updated agent config files
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties.emca.tmp to D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties.emca.tmp has been copied to D:\oracle1\product\10.2.0\db_1\sysman\config\emd.properties
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml.emca.tmp to D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml.emca.tmp has been copied to D:\oracle1\product\10.2.0\db_1\sysman\emd\targets.xml
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PortManager addPortEntries
CONFIG: Updating file D:\oracle1\product\10.2.0\db_1\install\portlist.ini ...
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\install\portlist.ini to D:\oracle1\product\10.2.0\db_1\install\portlist.ini.emca.util.tmp
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file D:\oracle1\product\10.2.0\db_1\install\portlist.ini has been copied to D:\oracle1\product\10.2.0\db_1\install\portlist.ini.emca.util.tmp
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PortManager addPortEntries
CONFIG: Writing the selected ports to portlist.ini
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\install\portlist.ini.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\install\portlist.ini
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PortManager addPortEntries
CONFIG: File D:\oracle1\product\10.2.0\db_1\install\portlist.ini is successfully updated
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PortManager addPortEntries
CONFIG: Updating file D:\oracle1\product\10.2.0\db_1\install\portlist.ini ...
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\install\portlist.ini to D:\oracle1\product\10.2.0\db_1\install\portlist.ini.emca.util.tmp
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file D:\oracle1\product\10.2.0\db_1\install\portlist.ini has been copied to D:\oracle1\product\10.2.0\db_1\install\portlist.ini.emca.util.tmp
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PortManager addPortEntries
CONFIG: Writing the selected ports to portlist.ini
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file D:\oracle1\product\10.2.0\db_1\install\portlist.ini.emca.util.tmp to D:\oracle1\product\10.2.0\db_1\install\portlist.ini
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PortManager addPortEntries
CONFIG: File D:\oracle1\product\10.2.0\db_1\install\portlist.ini is successfully updated
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.DBControlUtil startOMS
INFO: Starting Database Control (this may take a while) ...
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: cmdType: 0
Sep 27, 2007 3:23:15 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Starting Windows service...OracleDBConsoleEmbarq
Sep 27, 2007 3:23:16 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:23:26 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:23:36 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:23:46 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:23:56 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:24:06 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:24:16 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:24:26 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:24:36 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:24:46 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:24:56 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:25:06 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:25:16 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:25:26 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:25:36 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:25:46 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:25:56 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:26:06 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:26:16 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:26:26 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:26:36 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:26:46 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:26:56 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:27:06 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:27:16 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:27:26 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:27:36 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:27:46 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:27:56 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:28:06 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleEmbarq' to fully start
Sep 27, 2007 3:28:16 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting Database Control
Refer to the log file at D:\oracle1\product\10.2.0\db_1\cfgtoollogs\dbca\Embarq\emConfig.log for more details.
Sep 27, 2007 3:28:16 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error starting Database Control
     at oracle.sysman.emcp.EMDBPostConfig.performConfiguration(EMDBPostConfig.java:569)
     at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:181)
     at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:150)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:155)
     at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:430)
     at java.lang.Thread.run(Thread.java:534)

There is a log file referred at Refer to the log file at "D:\oracle1\product\10.2.0\db_1\cfgtoollogs\dbca\Embarq\emConfig.log for more details."
Check the contents of this file.
Out from the log you posted I can see it is a windows platform. One common issue with windows and EM is the lack of a fixed IP Address. If this is the case configure a loopback adapter.
In the mean time, you don't need to have checked the configure EM DB Control from install time, you can skip this configuration and perform it later, so at least you have a working database just to start.
~ Madrid

Error while testing Driver connection Through The EnterPrise Manager

Hi -
I am using OAS 10.1.3v for my application.I am using both SQL Server 2000 JDBC driver and Oracle JDBC driver for my application. I am encountering problems due to SQL Server 2000 JDBC driver.
I tried testing for connectivity for SQL driver through the enterprise manager.(on the em console, inside home/administration/JDBC resources ). I am getting the following error :
Unable to create : com.microsoft.jdbc.sqlserver.SQLServerDriver
Missing class: com.microsoft.jdbc.sqlserver.SQLServerDriver Dependent class: oracle.oc4j.sql.config.DataSourceConfigUtils Loader: oc4j:10.1.3 Code-Source: /E:/product/10.1.3.1/OracleAS_1/j2ee/home/lib/oc4j-internal.jar Configuration: in META-INF/boot.xml in E:\product\10.1.3.1\OracleAS_1\j2ee\home\oc4j.jar This load was initiated at ascontrol.web.ascontrol:0.0.0 using the Class.forName() method. The missing class is available from the following locations: 1. Code-Source: /E:/product/10.1.3.1/OracleAS_1/j2ee/home/applib/mssqlserver.jar (from in /E:/product/10.1.3.1/OracleAS_1/j2ee/home/config/server.xml) This code-source is available in loader global.libraries:1.0. This shared-library can be imported by the "ascontrol" application
I tried adding mssqlserver.jar to the shared library.Still, i got the same error.
The connection which i am trying to test, has the following entry in the data-sources.xml :
<connection-pool name="BPELPM_CONNECTION_POOL1" max-connections="30">
     <connection-factory factory-class="com.microsoft.jdbc.sqlserver.SQLServerDriver" user="sa" password="" url="jdbc:microsoft:sqlserver://localhost:1433;databaseName=WE411;selectMethod=cursor" commit-record-table-name=""/>
     </connection-pool>
     <managed-data-source connection-pool-name="BPELPM_CONNECTION_POOL1" jndi-name="jdbc/ExpressJDBCDataSource" name="ExpressJDBCDataSource"/>
I also tried with native-data-source option in the data-source.xml without a connection pool like -
<native-data-source
name="ExpressJDBCDataSource"
jndi-name="jdbc/ExpressJDBCDataSource"
description="Native DataSource"
data-source-class="com.microsoft.jdbc.sqlserver.SQLServerDataSource"
user="sa"
password=""
url="jdbc:microsoft:sqlserver://localhost:1433;databaseName=WE411 ;selectMethod=cursor ">
</native-data-source>
I am getting the same error as above.
Has anybody encountered a similiar problem ?
A related post that was posted by me is :
SQL Server Driver Problem in Oracle Application Server 10.1.3 data-sources

thank you very much for your help. for update server's full name, may I put the mapping values into host file in the format of <ip address> <hostname.domain name> <hostname>, do you think it is OK?
in the second blog you suggest there is something about Server port(please refer to the following):
in the window machine, there should be an entry like sapms<SAP System ID> , can you please give me a full example:
let's say my system ID is EC1, so it would be sapmsEC1 8000/tcp, right ?
Here you have to enter the port of your application server. By default this is 80<SAP System ID>. But your basis administrator can modify this setting, thatu2019s why you should check it in the transaction SMICM (Goto -> Parameters -> Display). For example the IBSolution Development System Erinome the port is 8000.
You can also have a look into your services file on your machine. If you have a windows machine then the file exists e.g. here C:\WINDOWS\system32\drivers\etc\services
In this file you should search a entry like sapms<SAP System ID>.
Edited by: jingying Sony on May 24, 2010 4:41 PM

Problem using Enterprise Manager 11g Database Control in Firefox 3.6.6

Hello all,
I just intalled Oracle 11g and trying to familiarize myself with Enterprise Manager 11g Dataabse Control using Firefox 3.6.6 in Windows XP.
I'm able to login to Enterprise manager successfully.
However, when I click on on "Performance Tab", the "SYSTEM_MOVING_WINDOW" is empty, and there's a prompt "Click Here to Download Plugin."
When I do click on it, I get message:
No suitable plugins were found.
Unknown plugin (application/octet-stream) [Manual Install].
I'm not sure what plugin I need so I can use Enterprise Manager properly.
Please help!
Thanks
Giovanni

I use the Opera browser so I can split the screen to monitor multiple instances at the same time on my 2nd monitor. I am not having issues with the 10g OEM but having the same problem listed in this thread with the 11g OEM ( we have both running during our migration to 11g). The posts here didn't help me with the 11g OEM as there must be some difference from 10g OEM. I will hate it if I can't do the split screen to monitor multiple instances at the same time. And if you are connecting via solaris or lunix browser then IE is not an option ( W3C standards please ).

Why I can't connect to Oracle Enterprise Manager via browser after install?

I've installed Oracle9iAS Release2(9.0.2) with Windows 2000 server (servicepack3) and Oracle9i database on the same host.After installation, I can use Oracle enterprise manager(via browser) by connect as "ias_admin" and "12345" for password (It's a password that I input at installing). But 2 days later, I cannot connect it!, what's happen to my 9iAS. I try to change my password in command line by "emctl set password <old_pwd> <new_pwd>, But I've got a message that is incorrect password. By the way, I use command line to start OC4J and HTTP Server instead. Please help me for this problem. Thank you very much.
Ps. I've got this problem for 2 time, but the first time I delete all of oracle products and install it again .

If you have installed the Oracle AS 10.1.3 using an Apache in front the default port is 7777 as far as I know.
You wrote that the main page is accessible, that's why I would suspect that you might have a problem with your hostname. Are you accessing the mainpage via the full qualified hostname or via ip?
Please ensure that you can reach the server using the full qualified hostname!
If you are not sure about it, add an entry to your local hosts-file.
Please tell us if this was your problem!
Regards,
Eric

Problem accessing enterprise manager -password

Hi,
I was running my application successfully on Oracle 9i As Release 2 Enterprise Edition. But suddenly after a restart, i am unable to access the enterprise manager. It doesnot accept the password which i was using till yesterday.
In the command prompt, i tried changing the password using emctl set password abcd
It accepts the password, but even this password doesnot work.
I am neither able to access the website nor able to shutdown EM as it asks for password again!!!!
Kindly help
Thanks
Srinath

when iam startup database
it mount sucessfuly but not open
due to password file curropted....
then iam recreate password file using oradim utility.
then it startup sucessfuly
no error
but the problem is it connect any username and any password when i am connect as sysdba.
why this happend iam not able to understand.....

Unable to connect to the Enterprise Manager by using SYS as sydba

Oracle 9.2.0.4 is running on HPUx 11i machine. When I am trying to connect to Enterprise manager/sqlplus by using salplus as /sysdba, It gives me the following errore.
ORA-01031: insufficient privileges
If you encountr this problem, please let me know, how to solve it.
Regards
Sebthil

Solution:
I ran into the same problem. You have to first create a password file. Run
orapwd file=<fname> password=<password> entries=<users>
The file will usually be in the dbs by default. You may have to play with the file name. I had to make it orapwd in dbs to make it recognize correctly.
Next you need to modify your startup parameter for your instance to use the remote_login_passwordfile='shared' or 'exclusive'
Set it to exclusive if you have only one instance or shared if you have multiple instances. I had to use the pfile and start the instance with that. Just rename your spfile and type 'sql>create pfile from spfile' and then edit it. Set your parameter and restart your instance. The do 'sql>create spfile from pfile' to make your spfile again. Now you should be able to connect as sys remotely from sql or OEM!!!
Doc:
Setting REMOTE_LOGIN_ PASSWORDFILE
In addition to creating the password file, you must also set the initialization parameter REMOTE_LOGIN_PASSWORDFILE to the appropriate value. The values recognized are described as follows:
Value Description
NONE
Setting this parameter to NONE causes Oracle to behave as if the password file does not exist. That is, no privileged connections are allowed over non-secure connections. NONE is the default value for this parameter.
EXCLUSIVE
An EXCLUSIVE password file can be used with only one database. Only an EXCLUSIVE file can contain the names of users other than SYS. Using an EXCLUSIVE password file allows you to grant SYSDBA and SYSOPER system privileges to individual users and have them connect as themselves.
SHARED
A SHARED password file can be used by multiple databases. However, the only user recognized by a SHARED password file is SYS. You cannot add users to a SHARED password file. All users needing SYSDBA or SYSOPER system privileges must connect using the same name, SYS, and password. This option is useful if you have a single DBA administering multiple databases.

Configuration Problem Oracle Enterprise Manager 9i

Hello Friends,
I have installed oracle 9i on windows 2000 server, But when I run oracle enterprise manager it asks me the userid and password.
Anyone could tell me what is the userid and password i should provide, and any other necessary configuration to work with OEM 9i
Your response would be great help for me.
Thanks,
Faisal.

If you want to get connection in stand-alone mode you can use the user system and its password. If you do not know the password of the user system you can do this in the Oracle Server.
SET ORACLE_SID=<database_sid>
sqlplus /nolog
conn / as sysdba
alter user system identified by <new_password>;
exit
through that way you will be change the password to the user system and you will be able to get connection from OEM. There are other details to get connection from OEM . Test it so and if you have troubles to do it you will be able to reply.
Joel Pérez

Backup problems from Enterprise Manager Database control

I'm having a problem with performing backups from EM DB Control on two of my Oracle 10g 10.2.0.4 systems. When I configure and submit any backup job from EM (either online or offline), the following happens:
- When the job is due to run a Pre backup task has status of 'Scheduled'
- Prebackup task completes and status changes to 'Succeeded'
- Backup task appears with status of 'Scheduled' and value of started time within the next minute
- Status of backup task never changes from 'Scheduled', and the started time keeps updating to the current time
- This goes on indefinitely until I abort the job
At the moment I have scheduled tasks configured to run an RMAN job every night, but I need to get this working through Enterprise Manager Database control. Please help!
Something else which has happended on one of these systems is that after applying some Microsoft Critical updates the database control service would not start. The only way I could find to resolve this was to recreate the Enterprise Manager repository. Could there be a link here at all?
Cheers,
Strak

I think Rodney may have the cause, because the database has been copied. I have looked in every property file I can think of, and then all the rest anyway, and there is no reference to the old host name. And I have ralready e-installed EM using emca -config -dbcontrol db. And I'm definately on the correct port.
So it must be held internally in the database. I've seen partial instructions on deleting the EM repository in the database & java files, does anyone have a full set I can use ? Once that is done, does emca reinstall everything ?
Many thanks, Duncan

Problems with Enterprise Manager WebSite

I have installed Oracle Application Server R2 on a Win2k.
The problem is that I can do almost nothing through the Enterprise Manager Web Site.
1. Once, I tried to create a new OC4J instance on a 9iAS install with just ONE deployed application, but I got a Base Exception (or something) that meant nothing to me. After that, most of the components (including OC4J_home) couldn't be managed, although the corresponding application was up and running.
2. Once, I tried to deploy an EAR file. The procedure would last for ever so I had to close the window of my browser. After that, any change that I tried to make (even a dummy change - just pressing the Apply button of a page) failed telling me that I had to "resync my instance" through the dcm utility. I did and, now, every change I try to apply gives me a timeout error.
The situation is getting rather iritating. I would like to know if there is any bug. Or is there a certain procedure that I sould follow when dealing with the Enterprise Manager?
What I have figured out is that when a procedure is interrupted (e.g. when it seems to have stuck), then the problems begin. Is there a way to ensure that the system fully recovers from any previous unsuccessful procedure? I have only tried the "resetFileTransaction" command from the dcm utility without results.
One last question: can I manage my application server through its XML files manually (without ever touching the enterprise manager)?
I am desperate. Any help would be appreciated.
Thanx

I am experiencing the same problems + I run the 9iAS R2 on a machine with 1GB RAM! Furthermore when I call a PL/SQL from a machine other than the AS Server itself not all content is written to the HTTP response and I end up having a broken HTML content.
The editing of the XML config files came to my mind as well, though you also need to edit the .conf files of the Appache and all Modules you are using ... which is not very productive!
Cheers Niels

Wily Instroscope Agent connection problem to Enterprise Manager

Similar Messages

Maybe you are looking for