Wily Introscope Dashboard cannot be started: Silverlight Error 2104
Dear Gurus,
we have installed a DualStack SolMan 7.0 Ehp1 SPS23 on AIX/Oracle.
Diagonstics and WilyEM 8.2 is installed and running well, Data from Agetens SMD7.11 and IntroscopeBytecodeAgents data are displayed also in Wily Introscope Webview - Investigator tab.
Silverlight 4 is installed since last May.
Last week the regular Microsoft-Patching did on our FrontendWorkstations (WinXP SP3) with IE7
Additionally there was an upgrade of our SolMan Operating-System drom AIX5.3 to AIX6.1
During this update also an JAVA 1.5 was newely installed for WilyEM, and the parameter " "the VM to use for the next launch" in the lax-file points to this Java-Version: java full version "J2RE 1.5.0 IBM AIX build pap64dev-20091106a (SR11 )"
But today we recognized - after sucessfully start of Wily EM WebView - that there is a problem when we try to select one of the prepared Dashboards from SAP and press the "View"-Button:
We get an ErrorMessageBox from IE whichs saids:
"Silverlight error:"
"Error Type: InitializeError"
ErrorMessage:2104"
and no Dashboard comes up.
The same Error occours when we use antoher Browser ?
Can anybody please help ?
What could be the reason or solution for this kind of error ?
Thanks a lot !
Stephan
Dear Mateus,
unfortunately I wasn't able to use your workaround successfully:
Even when I mark the "Consoile"-Tab and press the "Refreh"-Button to reload the Page, i still get the same Error-Messages...
Are there newer/other fixes available to solve this problem ?
Which fix do you mean exactly ? We currently run following version of WilyEM / WebView (from IntroscopeEMWebView.log)
10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Introscope WebView Release 8.2.2.0 (Build 476364)
10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Using Java VM version "IBM J9 VM 1.5.0" from IBM Corporation
10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Using Introscope installation at: /usr/sap/ccms/wilyintroscope/.
10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] CA Wily Introscope(R) Version 8.2
10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Copyright (c) 2010 CA. All Rights Reserved.
10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Introscope(R) is a registered trademark of CA.
10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Starting Introscope WebView...
10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Introscope WebView started.
10/22/10 10:54:27 AM GMT+01:00 [INFO] [WebView.Login] Successfully logged in user "WilyWebView"
10/23/10 11:08:07 AM GMT+01:00 [ERROR] [WebView] java.lang.ClassCastException: org.apache.xml.dtm.ref.DTMManagerDefault incompatible with
org.apache.xml.dtm.DTMManager
10/23/10 11:08:18 AM GMT+01:00 [ERROR] [WebView] java.lang.ClassCastException: org.apache.xml.dtm.ref.DTMManagerDefault incompatible with
org.apache.xml.dtm.DTMManager
10/23/10 11:12:19 AM GMT+01:00 [ERROR] [WebView] java.lang.ClassCastException: org.apache.xml.dtm.ref.DTMManagerDefault incompatible with
org.apache.xml.dtm.DTMManager
10/23/10 11:12:34 AM GMT+01:00 [ERROR] [WebView] java.lang.ClassCastException: org.apache.xml.dtm.ref.DTMManagerDefault incompatible with
org.apache.xml.dtm.DTMManager
10/23/10 11:12:58 AM GMT+01:00 [ERROR] [WebView] java.lang.ClassCastException: org.apache.xml.dtm.ref.DTMManagerDefault incompatible with
org.apache.xml.dtm.DTMManager
Thanks,
Stephan
Similar Messages
-
Wily Introscope Agent does not start
Hi,
i am installing Solution Manager Diagnostics on a Solution Manger 7.0 System. At the moment i am on the point to install the Wily Introscop Agent and i have following problem:
At first i tried the automatic setup and deployed the agent with JSPM and it seemed to work. I see "ISAGENT" on the System Information -> All Compontents over http://0/smd/admin and there is no log directory in the wily directory?
Does anybody has an idea whats wrong?
Best Regards,
Stefan
Edited by: Stefan on Feb 17, 2009 8:57 AM
Edited by: Stefan on Feb 17, 2009 9:31 AMHello Stephan,
1. Wily IS Agent (2 agents) is installed ONLY in SOLMAN system.
2. Then, with SOLMAN_SETUP Guided procedure, in third phase (Managed System Configuration),
you deploy the Wily IS Agent to your managed system.
To summarize :
1. Install the ISAGENTxxx.SCA in SOLMAN only !
2. Start the SOLMAN_SETUP guided procedure
3. Phase I - Initial Configuration
Phase II - Basis Configuration
Phase III - Managed System Configuration.
In Phase III, there are 6 steps :
1. Connect Managed system
2. Check Prerequisites
3. Manual Configuration
4. Diagnostics Configuration
5. Wily Introscope Configuration
6. Create Logical Components
The Wily IS Agent (2 agents : IS Agent wich monitored JAVA instance and Wily Host-level Agent which a sub-process of the SMD Agent) is configured and STARTED here.
So, you cannot start / stop by any OS command the Wily IS Agent.
You start it from SMD.
Hope it help you.
Best regards
Pascal Cuennet -
I have installed Adobe 10 und Adobe 11. I have Win 7 64 Bit. Just after Installtion when I start Adobe there ist always a long error :
".......Adobe Reader can nit be found...."
I have no explanation for it. I am seeking for help.You shouldn't have two versions of Adobe Reader installed.
I suggest you remove both versions using http://labs.adobe.com/downloads/acrobatcleaner.html
then download and install the latest Reader from http://get.adobe.com/reader/enterprise/ -
Wily Introscope Enterprise Manager fails to start due to Java Heap
Hello All,
I just installed Wily Introscope for the first time. I have successfully installed it from the log below:
Summary
Installation: Successfulwith errors.
396 Successes
0 Warnings
1 NonFatalErrors
0 FatalErrors
I also confirm that the Introscope Enterprise Manager is started as a service.
However, when i try to launch enterprise by following the path All Programs > CA Wily > Introscope 8.2.3.5 > Introscope Enterprise Manager....
I get the error below:
3/29/11 07:11:46 PM PDT [ERROR] [Manager.Bootstrap] Load all Management Modules FAILED.
3/29/11 07:11:46 PM PDT [ERROR] [Manager] The EM failed to start. Java heap space
I have also adapted my Java Heap from 512 to 1024 in EMService.conf file but I still get same error. This was the recommendation in this related forum post - Wily Introscope - EM failed to start
Please help!!!!Hello,
Like I said, I have increased the value to 1024MB and still not starting.
The corresponding section of the EMService is pasted below:
Wrapper Properties
Java Application
wrapper.java.command=jre
bin
java.exe
wrapper.working.dir=.\
Java Main class
wrapper.java.mainclass=org.tanukisoftware.wrapper.WrapperSimpleApp
Java Classpath (include wrapper.jar) Add class path elements as
needed starting from 1
wrapper.native_library=ServiceWrapper32
wrapper.java.classpath.1=./lib/ServiceWrapper32.jar
wrapper.java.classpath.2=./launcher.jar
#wrapper.java.classpath.3=
Java Library Path (location of Wrapper.DLL or libwrapper.so)
wrapper.java.library.path.1=./lib
Java Additional Parameters
Note: On 64-bit Windows only, the first additional parameter must be: -Xrs
#wrapper.java.additional.1=
wrapper.java.additional.1=-Xrs
wrapper.java.additional.2=-Djava.awt.headless=false
Initial Java Heap Size (in MB)
wrapper.java.initmemory=512
Maximum Java Heap Size (in MB)
wrapper.java.maxmemory=1024
Application parameters. Add parameters as needed starting from 1
wrapper.app.parameter.1=org.eclipse.core.launcher.Main
wrapper.app.parameter.2=-consolelog
wrapper.app.parameter.3=-noExit
wrapper.app.parameter.4=-product
wrapper.app.parameter.5=com.wily.introscope.em.product
wrapper.app.parameter.6=-install
wrapper.app.parameter.7=./product/enterprisemanager
wrapper.app.parameter.8=-configuration
wrapper.app.parameter.9=./product/enterprisemanager/configuration
Number of seconds to allow between the time that the Wrapper launches
the JVM process and the time that the JVM side of the Wrapper responds
that the application has started. 0 means never time out. Defaults to 30 seconds.
wrapper.startup.timeout=300
Please help -
Wily Introscope is not running in Solution Manager 7.1
Hello Experts,
wily Introscope is not running in solution manager system,
below error getting in log, solution manager is running on windows server and how to start wily in windows.
8/23/14 11:58:50.088 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
8/23/14 11:58:50.090 AM IST [INFO] [WrapperSimpleAppMain] [Manager]
****** CA Wily Introscope License ******
type = em-sap
rev = 30
cid = sap-ags
organization = SAP Active Global Support
reg-id = sap-end-user
email = none
sum = 27618b562bc2239e3cf71d9542c76df4
8/23/14 11:58:50.091 AM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
8/23/14 11:58:50.113 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
8/23/14 11:58:52.343 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
8/23/14 11:58:52.343 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
8/23/14 11:58:52.412 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
8/23/14 11:58:52.628 AM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
8/23/14 11:58:52.645 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
8/23/14 11:58:52.655 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager]
****** CA Wily Introscope License ******
type = em-sap
rev = 30
cid = sap-ags
organization = SAP Active Global Support
reg-id = sap-end-user
email = none
sum = 27618b562bc2239e3cf71d9542c76df4
8/23/14 12:02:31.586 PM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
8/23/14 12:02:31.602 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
8/23/14 12:02:31.958 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
8/23/14 12:02:31.959 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
8/23/14 12:02:32.030 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
8/23/14 12:02:32.287 PM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
8/23/14 12:02:32.306 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
8/23/14 12:02:32.321 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
8/23/14 12:37:05.225 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
8/23/14 12:37:05.227 PM IST [INFO] [WrapperSimpleAppMain] [Manager]
****** CA Wily Introscope License ******
type = em-sap
rev = 30
cid = sap-ags
organization = SAP Active Global Support
reg-id = sap-end-user
email = none
sum = 27618b562bc2239e3cf71d9542c76df4
8/23/14 12:37:05.228 PM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
8/23/14 12:37:05.249 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
8/23/14 12:37:05.644 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
8/23/14 12:37:05.644 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
8/23/14 12:37:05.728 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
8/23/14 12:37:05.994 PM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
8/23/14 12:37:06.014 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
8/23/14 12:37:06.028 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
Please assist me on this
Best Regards
HanumanHello Srivastav,
i am getting below problem in wily introscope log
9/01/14 11:22:02.675 AM IST [ERROR] [WrapperSimpleAppMain] [Manager.Acceptor] Failed to bind to server socket
java.net.BindException: Address already in use: bind
at sun.nio.ch.Net.bind(Native Method)
at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:126)
at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:59)
at com.wily.isengard.postofficehub.link.server.Acceptor.<init>(Acceptor.java:72)
at com.wily.isengard.postofficehub.link.server.ConnectionListenerFactory.create(ConnectionListenerFactory.java:31)
at com.wily.isengard.postoffice.server.PostOfficeHubServer.startIncomingConnectionListener(PostOfficeHubServer.java:261)
at com.wily.isengard.postoffice.server.PostOfficeHubServer.startAllIncomingConnectionListeners(PostOfficeHubServer.java:235)
at com.wily.isengard.postoffice.server.PostOfficeHubServer.acceptIncomingHubConnections(PostOfficeHubServer.java:103)
at com.wily.isengard.api.server.IsengardControllerServer.acceptIncomingConnections(IsengardControllerServer.java:207)
at com.wily.isengard.api.samplemain.SampleMain.acceptIncomingConnections(SampleMain.java:117)
at com.wily.introscope.server.enterprise.EnterpriseServer.initialize(EnterpriseServer.java:708)
at com.wily.introscope.server.enterprise.EnterpriseServer.doStart(EnterpriseServer.java:358)
at com.wily.util.ALifeCycle.start(ALifeCycle.java:86)
at com.wily.introscope.server.enterprise.EnterpriseServer.<init>(EnterpriseServer.java:301)
at com.wily.introscope.server.enterprise.EnterpriseServer.<init>(EnterpriseServer.java:280)
at com.wily.introscope.server.enterprise.EnterpriseServer.start(EnterpriseServer.java:1444)
at com.wily.introscope.em.internal.Activator.startEM(Activator.java:116)
at com.wily.introscope.em.internal.Application.start(Application.java:27)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:193)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
at org.eclipse.equinox.launcher.Main.main(Main.java:1212)
at org.eclipse.core.launcher.Main.main(Main.java:30)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.tanukisoftware.wrapper.WrapperSimpleApp.run(WrapperSimpleApp.java:244)
at java.lang.Thread.run(Thread.java:662)
9/01/14 11:22:02.679 AM IST [INFO] [WrapperSimpleAppMain] [Manager.PostOfficeHub] Server listening for incoming default socket connections on port 6001
9/01/14 11:22:02.682 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Connection Initiator listening...
9/01/14 11:22:02.684 AM IST [INFO] [WrapperSimpleAppMain] [Manager.MMHotDeployEntity] Will monitor D:\usr\sap\CCMS\apmintroscope\deploy for new files every 60 seconds
9/01/14 11:22:02.685 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager started with management module warnings.
9/01/14 11:22:42.883 AM IST [INFO] [PO:main Mailman 1] [Manager.LoadBalancer] Loaded loadbalancing.xml
9/01/14 11:23:31.817 AM IST [INFO] [btpool0-1] [Manager] User "Admin" logged in successfully from host "localhost"
9/01/14 11:23:31.825 AM IST [INFO] [btpool0-1] [Manager] request.getContextPath() /webview
9/01/14 11:23:31.826 AM IST [INFO] [btpool0-1] [Manager] Login event Admin 1667ryb11leum 10.1.0.133 true
9/01/14 11:51:30.061 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409164200000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.063 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409077800000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.064 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409423400000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.066 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409337000000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.067 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409250600000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.088 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1406831400000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.089 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1408991400000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.090 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1408905000000.data seems to be OK - not sure what to do with append inputs
Please help me to sort this issue,
Best Regards,
Hanuman Chinthalwar -
Wily Introscope 8.2.2 - No License for Wrapper service
Hi All,
I've installed the Wily Introscope Manager 8.2.2. When starting the EM service, I get the following error message in the log file:
STATUS | wrapper | 2010/09/20 15:10:47 | --> Wrapper Started as Service
STATUS | wrapper | 2010/09/20 15:10:47 | Java Service Wrapper Standard Edition 32-bit 3.3.6
STATUS | wrapper | 2010/09/20 15:10:47 | Copyright (C) 1999-2009 Tanuki Software, Ltd. All Rights Reserved.
STATUS | wrapper | 2010/09/20 15:10:47 | http://wrapper.tanukisoftware.org
STATUS | wrapper | 2010/09/20 15:10:47 |
ERROR | wrapper | 2010/09/20 15:10:47 | License Error:
ERROR | wrapper | 2010/09/20 15:10:47 | A valid license was not found in the Wrapper configuration file.
ERROR | wrapper | 2010/09/20 15:10:47 |
ERROR | wrapper | 2010/09/20 15:10:47 | A license can be obtained from the Java Service Wrapper site:
ERROR | wrapper | 2010/09/20 15:10:47 | http://wrapper.tanukisoftware.org/doc/english/purchase.html
I believe that Wily is licensed as part of the Solution Manager Enterprise edition. So why do I need to buy an additional license?
Regards,
MasoudHi
For the Wily Introscope Enterprise Manager 8.2 the error you described
occurs if the em-include.conf file is missing in the EM' installation.
This file is included into the SAP managed modules SAPISMM02_0*.SAR
file.
Note that for Wily Introscope EM 8.2.2 you need to install the SAP
management modules after the installation of the EM 8.2.2 AND before
you attempt to start the service
Please refer to the Node 797147 for the documentation about the
the SAPISMM02_0*.SAR - management modules to be installed on top of
Enterprise Manager.
Please consider additionally the Note 1273028
- The Enterprise Manager can only be launched as Windows Service
after the latest management module package (SAPISMM) has been
installed. The SAPISMM package contains a file em-include.conf
which is required.
I would like to ask you to implement the Note 1273028 and to retest the
issue.
Best Regards
Jai Wardhan -
Wily introscope 8.2.2 : unable to start due to JVM error
Hi,
I'm installing Wily introscope 8.2.2 for my Netweaver Solution Manager 7.01, on server Window 2008 x64.
I followed installation guide and I encountered a first "license error" to start Enterprise Manager that I resolved by installing SAP Management Modules.
Now, Enterprise manager still does not start because of JVM problem. Here is the EMService.log :
STATUS | wrapper | 2010/07/01 18:05:24 | --> Wrapper Started as Service
STATUS | wrapper | 2010/07/01 18:05:24 | Java Service Wrapper Standard Edition 32-bit 3.3.6
STATUS | wrapper | 2010/07/01 18:05:24 | Copyright (C) 1999-2009 Tanuki Software, Ltd. All Rights Reserved.
STATUS | wrapper | 2010/07/01 18:05:24 | http://wrapper.tanukisoftware.org
STATUS | wrapper | 2010/07/01 18:05:24 | Licensed to CA Wily Technology for Introscope Enterprise Manager
STATUS | wrapper | 2010/07/01 18:05:24 |
STATUS | wrapper | 2010/07/01 18:05:24 | Launching a JVM...
INFO | jvm 1 | 2010/07/01 18:05:24 | java.lang.NoClassDefFoundError: org/tanukisoftware/wrapper/WrapperSimpleApp
INFO | jvm 1 | 2010/07/01 18:05:24 | Exception in thread "main"
ERROR | wrapper | 2010/07/01 18:05:24 | JVM exited while loading the application.
STATUS | wrapper | 2010/07/01 18:05:29 | Launching a JVM...
INFO | jvm 2 | 2010/07/01 18:05:29 | java.lang.NoClassDefFoundError: org/tanukisoftware/wrapper/WrapperSimpleApp
INFO | jvm 2 | 2010/07/01 18:05:29 | Exception in thread "main"
ERROR | wrapper | 2010/07/01 18:05:29 | JVM exited while loading the application.
STATUS | wrapper | 2010/07/01 18:05:34 | Launching a JVM...
INFO | jvm 3 | 2010/07/01 18:05:34 | java.lang.NoClassDefFoundError: org/tanukisoftware/wrapper/WrapperSimpleApp
INFO | jvm 3 | 2010/07/01 18:05:34 | Exception in thread "main"
ERROR | wrapper | 2010/07/01 18:05:34 | JVM exited while loading the application.
STATUS | wrapper | 2010/07/01 18:05:39 | Launching a JVM...
INFO | jvm 4 | 2010/07/01 18:05:39 | java.lang.NoClassDefFoundError: org/tanukisoftware/wrapper/WrapperSimpleApp
INFO | jvm 4 | 2010/07/01 18:05:39 | Exception in thread "main"
ERROR | wrapper | 2010/07/01 18:05:39 | JVM exited while loading the application.
STATUS | wrapper | 2010/07/01 18:05:44 | Launching a JVM...
INFO | jvm 5 | 2010/07/01 18:05:44 | java.lang.NoClassDefFoundError: org/tanukisoftware/wrapper/WrapperSimpleApp
INFO | jvm 5 | 2010/07/01 18:05:45 | Exception in thread "main"
ERROR | wrapper | 2010/07/01 18:05:45 | JVM exited while loading the application.
FATAL | wrapper | 2010/07/01 18:05:45 | There were 5 failed launches in a row, each lasting less than 300 seconds. Giving up.
FATAL | wrapper | 2010/07/01 18:05:45 | There may be a configuration problem: please check the logs.
STATUS | wrapper | 2010/07/01 18:05:45 | <-- Wrapper Stopped
Regards,
Pascal LARRAT
Edited by: LARRAT Pascal on Jul 5, 2010 11:44 AMchange the properties of Wily.exe as 2003 Server compatible.
-
SOLMAN SMD Wily Introscope: no dashboards are available
Hi!
I would like to use the SAP SMD functions and Wily Introscope 8.0
I am on SAP SOLMAN 7.0 EhP1.
The problem I have: when I start Wily Introscope no dashboards are available.
Can some one help me to solve this problem?
Thank you very much!
regards
AxelYou might have already checked the SAP Note 797147 and installation guide for Wily I 8.0 at
http://service.sap.com/instguides -> Installation & Upgrade Guides -> SAP Components -> SAP Solution Manager -> Release 7.0 -> Wily Introscope 8.0 - Installation Guide
From the installation guide could you confirm section ..."Check That Introscope Is Running Properly"
Also confirm you have set Java VM Parameters...
I think you need to check the Installation guide thoroughly.
Let us know if you have any error log or something....
All the best. -
Wily Introscope does not start
Hi there,
I've installed the Wily Introscope Enterprise Manager and when i try to start, the error below happens:
java.lang.RuntimeException: Application "com.wily.introscope.em.application" could not be found in the registry. The applications available are: org.eclipse.e
quinox.app.error.
at org.eclipse.equinox.internal.app.EclipseAppContainer.startDefaultApp(EclipseAppContainer.java:236)
at org.eclipse.equinox.internal.app.EclipseAppContainer.start(EclipseAppContainer.java:92)
at org.eclipse.equinox.internal.app.Activator.addingService(Activator.java:129)
at org.osgi.util.tracker.ServiceTracker$Tracked.trackAdding(ServiceTracker.java:1064)
at org.osgi.util.tracker.ServiceTracker$Tracked.track(ServiceTracker.java:1042)
at org.osgi.util.tracker.ServiceTracker$Tracked.serviceChanged(ServiceTracker.java:967)
at org.eclipse.osgi.framework.internal.core.FilteredServiceListener.serviceChanged(FilteredServiceListener.java:94)
at org.eclipse.osgi.framework.internal.core.BundleContextImpl.dispatchEvent(BundleContextImpl.java:1224)
at org.eclipse.osgi.framework.eventmgr.EventManager.dispatchEvent(EventManager.java:195)
at org.eclipse.osgi.framework.eventmgr.ListenerQueue.dispatchEventSynchronous(ListenerQueue.java:141)
at org.eclipse.osgi.framework.internal.core.Framework.publishServiceEventPrivileged(Framework.java:1603)
at org.eclipse.osgi.framework.internal.core.Framework.publishServiceEvent(Framework.java:1578)
at org.eclipse.osgi.framework.internal.core.ServiceRegistrationImpl.<init>(ServiceRegistrationImpl.java:103)
at org.eclipse.osgi.framework.internal.core.BundleContextImpl.createServiceRegistration(BundleContextImpl.java:657)
at org.eclipse.osgi.framework.internal.core.BundleContextImpl.registerService(BundleContextImpl.java:609)
at org.eclipse.osgi.framework.internal.core.BundleContextImpl.registerService(BundleContextImpl.java:675)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:359)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:176)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
at java.lang.reflect.Method.invoke(Method.java:391)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:504)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:443)
at org.eclipse.equinox.launcher.Main.run(Main.java:1169)
at org.eclipse.equinox.launcher.Main.main(Main.java:1144)
at org.eclipse.core.launcher.Main.main(Main.java:30)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
at java.lang.reflect.Method.invoke(Method.java:391)
at com.zerog.lax.LAX.launch(DashoA8113)
at com.zerog.lax.LAX.main(DashoA8113)
Anybody has already seen it?
Thanks in advance,
Dany AndersonHi
I have nearly the same error. May you share your solution?
Thanks in advance!
BR, Manuel -
Wily introscope 8.2.2 service not starting
Hi All,
I have recently installed wily introscope on our new solution manager server, other than a few issues with modules the manager starts up without problems from a command line.
When I try to start the manager as a service the wrapper application performs this error.
STATUS | wrapper | 2010/07/14 17:35:37 | --> Wrapper Started as Service
STATUS | wrapper | 2010/07/14 17:35:37 | Java Service Wrapper Standard Edition 32-bit 3.3.6
STATUS | wrapper | 2010/07/14 17:35:37 | Copyright (C) 1999-2009 Tanuki Software, Ltd. All Rights Reserved.
STATUS | wrapper | 2010/07/14 17:35:37 | http://wrapper.tanukisoftware.org
STATUS | wrapper | 2010/07/14 17:35:37 | Licensed to CA Wily Technology for Introscope Enterprise Manager
STATUS | wrapper | 2010/07/14 17:35:37 |
STATUS | wrapper | 2010/07/14 17:35:37 | Launching a JVM...
INFO | jvm 1 | 2010/07/14 17:35:37 | java.lang.NoClassDefFoundError: org/tanukisoftware/wrapper/WrapperSimpleApp
INFO | jvm 1 | 2010/07/14 17:35:37 | Exception in thread "main"
ERROR | wrapper | 2010/07/14 17:35:37 | JVM exited while loading the application.
STATUS | wrapper | 2010/07/14 17:35:42 | Launching a JVM...
INFO | jvm 2 | 2010/07/14 17:35:42 | java.lang.NoClassDefFoundError: org/tanukisoftware/wrapper/WrapperSimpleApp
INFO | jvm 2 | 2010/07/14 17:35:42 | Exception in thread "main"
ERROR | wrapper | 2010/07/14 17:35:42 | JVM exited while loading the application.
STATUS | wrapper | 2010/07/14 17:35:46 | Launching a JVM...
INFO | jvm 3 | 2010/07/14 17:35:46 | java.lang.NoClassDefFoundError: org/tanukisoftware/wrapper/WrapperSimpleApp
INFO | jvm 3 | 2010/07/14 17:35:46 | Exception in thread "main"
ERROR | wrapper | 2010/07/14 17:35:46 | JVM exited while loading the application.
STATUS | wrapper | 2010/07/14 17:35:51 | Launching a JVM...
INFO | jvm 4 | 2010/07/14 17:35:51 | java.lang.NoClassDefFoundError: org/tanukisoftware/wrapper/WrapperSimpleApp
INFO | jvm 4 | 2010/07/14 17:35:51 | Exception in thread "main"
ERROR | wrapper | 2010/07/14 17:35:51 | JVM exited while loading the application.
STATUS | wrapper | 2010/07/14 17:35:56 | Launching a JVM...
INFO | jvm 5 | 2010/07/14 17:35:56 | java.lang.NoClassDefFoundError: org/tanukisoftware/wrapper/WrapperSimpleApp
INFO | jvm 5 | 2010/07/14 17:35:56 | Exception in thread "main"
ERROR | wrapper | 2010/07/14 17:35:56 | JVM exited while loading the application.
FATAL | wrapper | 2010/07/14 17:35:56 | There were 5 failed launches in a row, each lasting less than 300 seconds. Giving up.
FATAL | wrapper | 2010/07/14 17:35:56 | There may be a configuration problem: please check the logs.
STATUS | wrapper | 2010/07/14 17:35:56 | <-- Wrapper Stopped
STATUS | wrapper | 2010/07/15 09:47:08 | --> Wrapper Started as Service
Unless I am missing something (most probable), it looks like the Java Main class wrapper.java.mainclass=org.tanukisoftware.wrapper.WrapperSimpleApp is looking for java.lang.NoClassDefFoundError
Not being a java person language issue?
Anyway has anyone had this issue or resolved it?
Running windows 2008 R1 enterprise, oracle DB, solution manager EHP1
Many thanksHi Guilherme
Just for yours or anyone running this under windows 2008, you were correct with note 1273028.
If the windows service still fails to start please check if files ServiceWrapper.jar and ServiceWrapper.dll are present in folder lib. If not download them from attachment of this note: ServiceWrapper_822.zip for release 8.2.2.0, ServiceWrapperWindowsAMD64SAP.zip for previous 8.x releases.
The service should start although giving an error message regarding the ServiceWrapper.dll. You can ignore this error.
I noted that the installer did not install ServiceWrapper.jar and ServiceWrapper.dll, I down loaded both attachments, however ServiceWrapper_822.zip only seemed to work.
Thanks for your help
Mike -
Error while installing Wily Introscope
Hi All,
I have installed introscope enterprise manager 8 in solution manager 7.0 (SP15). i have follwed the below steps:
1. Installation and Setup of SAP Solution Manager Server:
upgrading SAP Solution Manager Diagnostics (SMD) package
running Diagnostic setup wizard
everything went successful.
in the next step of wily introscope installation i have followed the below steps:
2. installing CA Wily Introscope
I. Download Third-Party External Component Package from CA Wily
II. elected Platform Independent Introscope Installer
III. Extracted the Introscope Installer
IV. Added the External Component Package
V. Started the Installer
VI. Verified the Installation
VII.Installed the SAP Management Modules
VIII.Ran the Enterprise Manager from OS level (AIX)
IX. Checked That Introscope Is Running Properly
X. Extracted the Introscope Agent
XI. Created an AutoProbe Connector
XII. Activated the Agent: Setting up Java VM Parameters -
here I am facing the issue
in the installation manual it has been given to add the below java parameters to server node:
-Xbootclasspath/p:/usr/sap/ccms/wily/connectors/connector.jar:/usr/sap/ccms/wily/Agent.jar
-Dcom.wily.introscope.agentProfile=/usr/sap/ccms/wily/IntroscopeAgent.profile
-Dcom.wily.introscope.agent.agentName=<AgentName>
i have added the above parameters and resterted the server then the java engine is not coming up. conflicting with the first parameter. once I remove that parameter I am able to up the java engine.
without being added the above parameters " the agent will not start".
please help me in this.
thanks in advance
Mohan KMohan,
I have the same problem. That is I set up the SMD on the managed system and completed the Managed system configuration through Solman which Installed Wily Introscope. With Wily enabled , the Java server process does not start.
If I delete the 3 lines that have wily in it, it starts OK.
How did you resolve this problem. Please let me know in detail.
Thank you.
Ravi -
In "purchases" while in my App Store, Mountain Lion says, "an error has occurred" and the green 'download' button is grey and I cannot re-start the download. I was abroad when I purchased this app and during download, my internet connection was lost. At the time, Apple was still offering the e-chat, so I did that and the man was very helpful and it was a quick fix, so my download button turned green again, and I was able to begin the download. BUT during the download, I was kicked offline once again, and I decided to wait until I was back in the USA. I will go in to an Apple store and ask assistance, but if there is something I am missing, I'd like to try that first. Thanks in advance for any advice.
Welcome to the support forums.
Please ask this question in the Mac App Store forum where they can better assist you. -
i have just downloaded and installed the latest version of itunes. Now when i connect my ipad to my computer via USB, itunes states that the apple mobile device service cannot be started because of an unknown error (1058). The connection worked fine with the previous version of itunes.
so then i tried intsalling a stand alone if apple mobile device support (amds) but still it doesnt work
Did you get an error message when you did the standalone AMDS install? If so, what does it say? (Precise text, please.) -
Error while installing wily introscope 9.1.5.0
Dear Gurus,
While i tried to install the wily introscope 9.1.5.0, it ends with below error. please guide me to install.
Invalid External Component Package Specified
The specified package, /oracle/stage1/willy/osgiPackages.v9.1.5.0.unix.tar, is not the expected version. This Introscope installer expects version 9.1.5.0 of the external components package.
Edit the responsefile so that the externalComponentPackage property refers to version 9.1.5.0 of the external components package, then rerun the silent installer.
BalajiHi Divyanshu,
i copied the downloaded files in that stage directory and install it.
i used 797147 - Introscope Installation for SAP Customers for downloading the required setup files and for externel package is used Index of /ips/osgi/introscope_9.1.5.0
Balaji -
ipod touch for Christmas, but cannot get started: after installing itunes, when connecting to my laptop I get no instruactions, just the error message "This iPod cannot be used because the Aplle Mobile Device service is not started". Any suggestions???
Jennifer...
Follow the instructions here > iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows
Maybe you are looking for
-
VCORE PROBLEMS WITH MSI P35 NEO F
To see if I can help or at least explain what's happening, buy a MSI P35 NEO F for using a quad, the topic is as follows handling vcore is rare First thing I can not put less voltage that the cpu brings default, second what happens next if bios setti
-
Batch Capture Changes Media Start, End, and Duration
Hello all... For some reason, when I batch capture from an imported batch list in FCP 4.5, the program changes the media start, end, and duration just slightly once the capture has completed. Does anyone know why this might be occurring?
-
How to delete an Album in .Mac web gallery?
I sent a couple of albums to my .mac web gallery using iPhoto for organization. A couple of months later I eliminated that particular iPhoto library all together when I re did my photo organization. I've since re-done the photo organization and made
-
Urgent: Not all records extracted to ODS
Hi, Not all of the records I am trying to load get updated to ODS. Ex: Doc# Item# Created On Debit/Credit 1000 1 02012007 540 1000 2 02012007 540 1000 1 02022007 -540 1000 2 02022007 -540 Th
-
Energy Act of 2005 and Daylight Savings Time
We currently use Sun Studio compilers. We use the embedded tools.h RogueWave libraries. The Energy Act of 2005 changes the dates for Daylight Savings Time starting in 2007. Will there be any patches from Sun to handle this? We currently use RWZoneSim