Wily Introscope destination.JCODestination in SapAgentConfig.xml in MDM
Hello,
We are working to configure Wily Introscope on an MDM host. Goes ok until we view SapAgentConfig.xml. It should have an entry for:
hostagent.destination.SocketDestination name="MDMSocketDestination"
but instead it shows:
hostagent.destination.JCODestination name="PIB|WDFD00176320A_PIB_00">
Has anyone else encountered this before? If so, how did you resolve this?
Thanks in advance,
P.SL
Hi,
Do you see any mibehaviour because of the mentioned xml extract?
Elaborate.
Feel free to revert back.
--Ragu
Similar Messages
-
Wily Introscope is not running in Solution Manager 7.1
Hello Experts,
wily Introscope is not running in solution manager system,
below error getting in log, solution manager is running on windows server and how to start wily in windows.
8/23/14 11:58:50.088 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
8/23/14 11:58:50.090 AM IST [INFO] [WrapperSimpleAppMain] [Manager]
****** CA Wily Introscope License ******
type = em-sap
rev = 30
cid = sap-ags
organization = SAP Active Global Support
reg-id = sap-end-user
email = none
sum = 27618b562bc2239e3cf71d9542c76df4
8/23/14 11:58:50.091 AM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
8/23/14 11:58:50.113 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
8/23/14 11:58:52.343 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
8/23/14 11:58:52.343 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
8/23/14 11:58:52.412 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
8/23/14 11:58:52.628 AM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
8/23/14 11:58:52.645 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
8/23/14 11:58:52.655 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager]
****** CA Wily Introscope License ******
type = em-sap
rev = 30
cid = sap-ags
organization = SAP Active Global Support
reg-id = sap-end-user
email = none
sum = 27618b562bc2239e3cf71d9542c76df4
8/23/14 12:02:31.586 PM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
8/23/14 12:02:31.602 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
8/23/14 12:02:31.958 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
8/23/14 12:02:31.959 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
8/23/14 12:02:32.030 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
8/23/14 12:02:32.287 PM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
8/23/14 12:02:32.306 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
8/23/14 12:02:32.321 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
8/23/14 12:37:05.225 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
8/23/14 12:37:05.227 PM IST [INFO] [WrapperSimpleAppMain] [Manager]
****** CA Wily Introscope License ******
type = em-sap
rev = 30
cid = sap-ags
organization = SAP Active Global Support
reg-id = sap-end-user
email = none
sum = 27618b562bc2239e3cf71d9542c76df4
8/23/14 12:37:05.228 PM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
8/23/14 12:37:05.249 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
8/23/14 12:37:05.644 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
8/23/14 12:37:05.644 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
8/23/14 12:37:05.728 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
8/23/14 12:37:05.994 PM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
8/23/14 12:37:06.014 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
8/23/14 12:37:06.028 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
Please assist me on this
Best Regards
HanumanHello Srivastav,
i am getting below problem in wily introscope log
9/01/14 11:22:02.675 AM IST [ERROR] [WrapperSimpleAppMain] [Manager.Acceptor] Failed to bind to server socket
java.net.BindException: Address already in use: bind
at sun.nio.ch.Net.bind(Native Method)
at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:126)
at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:59)
at com.wily.isengard.postofficehub.link.server.Acceptor.<init>(Acceptor.java:72)
at com.wily.isengard.postofficehub.link.server.ConnectionListenerFactory.create(ConnectionListenerFactory.java:31)
at com.wily.isengard.postoffice.server.PostOfficeHubServer.startIncomingConnectionListener(PostOfficeHubServer.java:261)
at com.wily.isengard.postoffice.server.PostOfficeHubServer.startAllIncomingConnectionListeners(PostOfficeHubServer.java:235)
at com.wily.isengard.postoffice.server.PostOfficeHubServer.acceptIncomingHubConnections(PostOfficeHubServer.java:103)
at com.wily.isengard.api.server.IsengardControllerServer.acceptIncomingConnections(IsengardControllerServer.java:207)
at com.wily.isengard.api.samplemain.SampleMain.acceptIncomingConnections(SampleMain.java:117)
at com.wily.introscope.server.enterprise.EnterpriseServer.initialize(EnterpriseServer.java:708)
at com.wily.introscope.server.enterprise.EnterpriseServer.doStart(EnterpriseServer.java:358)
at com.wily.util.ALifeCycle.start(ALifeCycle.java:86)
at com.wily.introscope.server.enterprise.EnterpriseServer.<init>(EnterpriseServer.java:301)
at com.wily.introscope.server.enterprise.EnterpriseServer.<init>(EnterpriseServer.java:280)
at com.wily.introscope.server.enterprise.EnterpriseServer.start(EnterpriseServer.java:1444)
at com.wily.introscope.em.internal.Activator.startEM(Activator.java:116)
at com.wily.introscope.em.internal.Application.start(Application.java:27)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:193)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
at org.eclipse.equinox.launcher.Main.main(Main.java:1212)
at org.eclipse.core.launcher.Main.main(Main.java:30)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.tanukisoftware.wrapper.WrapperSimpleApp.run(WrapperSimpleApp.java:244)
at java.lang.Thread.run(Thread.java:662)
9/01/14 11:22:02.679 AM IST [INFO] [WrapperSimpleAppMain] [Manager.PostOfficeHub] Server listening for incoming default socket connections on port 6001
9/01/14 11:22:02.682 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Connection Initiator listening...
9/01/14 11:22:02.684 AM IST [INFO] [WrapperSimpleAppMain] [Manager.MMHotDeployEntity] Will monitor D:\usr\sap\CCMS\apmintroscope\deploy for new files every 60 seconds
9/01/14 11:22:02.685 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager started with management module warnings.
9/01/14 11:22:42.883 AM IST [INFO] [PO:main Mailman 1] [Manager.LoadBalancer] Loaded loadbalancing.xml
9/01/14 11:23:31.817 AM IST [INFO] [btpool0-1] [Manager] User "Admin" logged in successfully from host "localhost"
9/01/14 11:23:31.825 AM IST [INFO] [btpool0-1] [Manager] request.getContextPath() /webview
9/01/14 11:23:31.826 AM IST [INFO] [btpool0-1] [Manager] Login event Admin 1667ryb11leum 10.1.0.133 true
9/01/14 11:51:30.061 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409164200000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.063 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409077800000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.064 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409423400000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.066 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409337000000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.067 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409250600000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.088 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1406831400000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.089 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1408991400000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.090 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1408905000000.data seems to be OK - not sure what to do with append inputs
Please help me to sort this issue,
Best Regards,
Hanuman Chinthalwar -
Hi All,
We are unable to start Wily Introscope manager.Once start generating Java heap dump and went to down status.Please find the Log file details below and give your suggestion to resolve this issue.
Module=/usr/sap//wilyintroscope/jre/bin/libj9jit23.so
Module_base_address=0900000004620000
Target=2_30_20071004_14218_BHdSMr (AIX 6.1)
CPU=ppc64 (16 logical CPUs) (0x980000000 RAM)
JVMDUMP006I Processing Dump Event "gpf", detail "" - Please Wait.
JVMDUMP007I JVM Requesting System Dump using '/usr/sap/<SID>/wilyintroscope/core.20140724.183547.26476614.dmp'
JVMDUMP010I System Dump written to /usr/sap/<SID>/wilyintroscope/core.20140724.183547.26476614.dmp
JVMDUMP007I JVM Requesting Snap Dump using '/usr/sap/<SID>/wilyintroscope/Snap0002.20140724.183547.26476614.trc'
JVMDUMP010I Snap Dump written to /usr/sap/<SID>/wilyintroscope/Snap0002.20140724.183547.26476614.trc
JVMDUMP007I JVM Requesting Java Dump using '/usr/sap/<SID>/wilyintroscope/javacore.20140724.183547.26476614.txt'
JVMDUMP012E Error in Java Dump: /usr/sap/<SID>/wilyintroscope/javacore.20140724.183547.26476614.txt
JVMDUMP013I Processed Dump Event "gpf", detail "".
JVMJ9GC028E Option too large: '-Xmx4096m'
JVMJ9VM015W Initialization error for library j9gc23(2): Failed to initialize; unable to parse command line
Could not create the Java virtual machine.
Regards,
MKHi,
Plz find the java core details below.
NULL ------------------------------------------------------------------------
0SECTION TITLE subcomponent dump routine
NULL ===============================
1TISIGINFO Dump Event "gpf" (00002000) received
1TIDATETIME Date: 2014/07/24 at 18:36:07
1TIFILENAME Javacore filename: /usr/sap/<SID>/wilyintroscope/javacore.20140724.183547.26476614.txt
NULL ------------------------------------------------------------------------
0SECTION GPINFO subcomponent dump routine
NULL ================================
2XHOSLEVEL OS Level : AIX 6.1
2XHCPUS Processors -
3XHCPUARCH Architecture : ppc64
3XHNUMCPUS How Many : 16
NULL
1XHEXCPCODE J9Generic_Signal_Number: 0000000000000004
1XHEXCPCODE Signal_Number: 000000000000000B
1XHEXCPCODE Error_Value: 0000000000000000
1XHEXCPCODE Signal_Code: 0000000000000033
1XHEXCPCODE Handler1: 09001000A0C39D58
1XHEXCPCODE Handler2: 09001000A0C31E38
NULL
1XHEXCPMODULE Module: /usr/sap/<SID>/wilyintroscope/jre/bin/libj9jit23.so
1XHEXCPMODULE Module_base_address: 0900000004620000
NULL
1XHREGISTERS Registers:
2XHREGISTER R0:0000000000000002
2XHREGISTER R1:0FFFFFFFFFFFE150
2XHREGISTER R2:0000000000000002
2XHREGISTER R3:0000000000000002
2XHREGISTER R4:0000000000000002
2XHREGISTER R5:07000000002982C8
2XHREGISTER R6:0000000115E80F09
2XHREGISTER R7:0000000000000018
2XHREGISTER R8:0000000115F565B0
2XHREGISTER R9:0000000115D1B089
2XHREGISTER R10:FFFFFFFFFFFFFFFF
2XHREGISTER R11:0900000004654EB0
2XHREGISTER R12:000000011A1B7E9F
2XHREGISTER R13:0000000110011200
0SECTION ENVINFO subcomponent dump routine
NULL =================================
1CIJAVAVERSION J2RE 5.0 IBM J9 2.3 AIX ppc64-64 build j9vmap6423-20071007
1CIVMVERSION VM build 20071004_14218_BHdSMr
1CIJITVERSION JIT enabled - 20070820_1846ifx1_r8
1CIRUNNINGAS Running as a standalone JVM
1CICMDLINE ./jre/bin/java -Xms512m -Xmx4096m -Djava.awt.headless=true -Dsun.java2d.noddraw=true -Dorg.osgi.framework.bootdelegation=org.apache.xpath com.zerog.lax.L
AX /usr/sap/<SID>/wilyintroscope/bin/../Introscope_Enterprise_Manager.lax /tmp/env.properties.26476614
1CIJAVAHOMEDIR Java Home Dir: /usr/sap/<SID>/wilyintroscope/jre
1CIJAVADLLDIR Java DLL Dir: /usr/sap/<SID>/wilyintroscope/jre/bin
1CISYSCP Sys Classpath: /usr/sap/<SID>/wilyintroscope/jre/lib/vm.jar;/usr/sap/<SID>/wilyintroscope/jre/lib/core.jar;/usr/sap/<SID>/wilyintroscope/jre/lib/charsets.jar
;/usr/sap/<SID>/wilyintroscope/jre/lib/graphics.jar;/usr/sap/<SID>/wilyintroscope/jre/lib/security.jar;/usr/sap/<SID>/wilyintroscope/jre/lib/ibmpkcs.jar;/usr/sap/<SID>/wilyintr
oscope/jre/lib/ibmorb.jar;/usr/sap/<SID>/wilyintroscope/jre/lib/ibmcfw.jar;/usr/sap/<SID>/wilyintroscope/jre/lib/ibmorbapi.jar;/usr/sap/<SID>/wilyintroscope/jre/lib/ibmjcefw.
jar;/usr/sap/<SID>/wilyintroscope/jre/lib/ibmjgssprovider.jar;/usr/sap/<SID>/wilyintroscope/jre/lib/ibmjsseprovider2.jar;/usr/sap/<SID>/wilyintroscope/jre/lib/ibmjaaslm.jar;/
usr/sap/<SID>/wilyintroscope/jre/lib/ibmcertpathprovider.jar;/usr/sap/<SID>/wilyintroscope/jre/lib/server.jar;/usr/sap/<SID>/wilyintroscope/jre/lib/xml.jar;
1CIUSERARGS UserArgs:
2CIUSERARG -Xmx256M
2CIUSERARG -Xj9
2CIUSERARG -Xjcl:jclscar_23
2CIUSERARG -Dcom.ibm.oti.vm.bootstrap.library.path=/usr/sap/<SID>/wilyintroscope/jre/bin
2CIUSERARG -Dsun.boot.library.path=/usr/sap/<SID>/wilyintroscope/jre/bin
2CIUSERARG -Djava.library.path=/usr/sap/<SID>/wilyintroscope/jre/bin:/usr/sap/<SID>/wilyintroscope/jre/bin:/usr/sap/<SID>/wilyintroscope/jre/bin/classic:/usr/sa
p/<SID>/wilyintroscope/jre/bin:/usr/sap/<SID>/SYS/exe/run:/usr/sap/<SID>/wilyintroscope/jre/bin/j9vm:/usr/lib
2CIUSERARG -Djava.home=/usr/sap/<SID>/wilyintroscope/jre
2CIUSERARG -Djava.ext.dirs=/usr/sap/<SID>/wilyintroscope/jre/lib/ext
2CIUSERARG -Duser.dir=/usr/sap/<SID>/wilyintroscope
2CIUSERARG _j2se_j9=70912 0x09001000A048F3E8
2CIUSERARG vfprintf 0x0000000110001910
2CIUSERARG -Xms512m
2CIUSERARG -Xmx4096m
2CIUSERARG -Djava.awt.headless=true
2CIUSERARG -Dsun.java2d.noddraw=true
2CIUSERARG -Dorg.osgi.framework.bootdelegation=org.apache.xpath
2CIUSERARG -Dinvokedviajava
2CIUSERARG -Djava.class.path=/usr/sap/<SID>/wilyintroscope/bin/../launcher.jar:/usr/sap/<SID>/wilyintroscope/bin/../lax.jar:
2CIUSERARG vfprintf
2CIUSERARG _port_library 0x09001000A048FDF0
2CIUSERARG -Xdump
Regards,
MK -
Wily Introscope Dashboard cannot be started: Silverlight Error 2104
Dear Gurus,
we have installed a DualStack SolMan 7.0 Ehp1 SPS23 on AIX/Oracle.
Diagonstics and WilyEM 8.2 is installed and running well, Data from Agetens SMD7.11 and IntroscopeBytecodeAgents data are displayed also in Wily Introscope Webview - Investigator tab.
Silverlight 4 is installed since last May.
Last week the regular Microsoft-Patching did on our FrontendWorkstations (WinXP SP3) with IE7
Additionally there was an upgrade of our SolMan Operating-System drom AIX5.3 to AIX6.1
During this update also an JAVA 1.5 was newely installed for WilyEM, and the parameter " "the VM to use for the next launch" in the lax-file points to this Java-Version: java full version "J2RE 1.5.0 IBM AIX build pap64dev-20091106a (SR11 )"
But today we recognized - after sucessfully start of Wily EM WebView - that there is a problem when we try to select one of the prepared Dashboards from SAP and press the "View"-Button:
We get an ErrorMessageBox from IE whichs saids:
"Silverlight error:"
"Error Type: InitializeError"
ErrorMessage:2104"
and no Dashboard comes up.
The same Error occours when we use antoher Browser ?
Can anybody please help ?
What could be the reason or solution for this kind of error ?
Thanks a lot !
StephanDear Mateus,
unfortunately I wasn't able to use your workaround successfully:
Even when I mark the "Consoile"-Tab and press the "Refreh"-Button to reload the Page, i still get the same Error-Messages...
Are there newer/other fixes available to solve this problem ?
Which fix do you mean exactly ? We currently run following version of WilyEM / WebView (from IntroscopeEMWebView.log)
10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Introscope WebView Release 8.2.2.0 (Build 476364)
10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Using Java VM version "IBM J9 VM 1.5.0" from IBM Corporation
10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Using Introscope installation at: /usr/sap/ccms/wilyintroscope/.
10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] CA Wily Introscope(R) Version 8.2
10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Copyright (c) 2010 CA. All Rights Reserved.
10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Introscope(R) is a registered trademark of CA.
10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Starting Introscope WebView...
10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Introscope WebView started.
10/22/10 10:54:27 AM GMT+01:00 [INFO] [WebView.Login] Successfully logged in user "WilyWebView"
10/23/10 11:08:07 AM GMT+01:00 [ERROR] [WebView] java.lang.ClassCastException: org.apache.xml.dtm.ref.DTMManagerDefault incompatible with
org.apache.xml.dtm.DTMManager
10/23/10 11:08:18 AM GMT+01:00 [ERROR] [WebView] java.lang.ClassCastException: org.apache.xml.dtm.ref.DTMManagerDefault incompatible with
org.apache.xml.dtm.DTMManager
10/23/10 11:12:19 AM GMT+01:00 [ERROR] [WebView] java.lang.ClassCastException: org.apache.xml.dtm.ref.DTMManagerDefault incompatible with
org.apache.xml.dtm.DTMManager
10/23/10 11:12:34 AM GMT+01:00 [ERROR] [WebView] java.lang.ClassCastException: org.apache.xml.dtm.ref.DTMManagerDefault incompatible with
org.apache.xml.dtm.DTMManager
10/23/10 11:12:58 AM GMT+01:00 [ERROR] [WebView] java.lang.ClassCastException: org.apache.xml.dtm.ref.DTMManagerDefault incompatible with
org.apache.xml.dtm.DTMManager
Thanks,
Stephan -
Wily Introscope 8.2.2.0
Hallo,
I´m installing Wily Introscope 8.2.2.0 on Solution Manager 7.0 EHP1. I proceed according to
installation guide. Problem appears, when I want to launch Enterprise Manager as Windows Service.
In EMService.log I found this:
ERROR | wrapper | 2010/05/18 10:23:39 | License Error:
ERROR | wrapper | 2010/05/18 10:23:39 | A valid license was not found in the Wrapper configuration file.
ERROR | wrapper | 2010/05/18 10:23:39 |
ERROR | wrapper | 2010/05/18 10:23:39 | A license can be obtained from the Java Service Wrapper site:
ERROR | wrapper | 2010/05/18 10:23:39 | http://wrapper.tanukisoftware.org/doc/english/purchase.html
ERROR | wrapper | 2010/05/18 10:23:39 |
ERROR | wrapper | 2010/05/18 10:23:39 | Licenses can be generated for any of the following Host Ids.
ERROR | wrapper | 2010/05/18 10:23:39 | The first Host Id is recommended.
I looked on this pages and license for Java Service Wrapper is only for purchase.
I thought that Wily is licensed by SAP or do I concern myself?
Thanks for help.
J.M.DI used the latest version I found:
SAPISEM02_0-10007433.SAR - introscope8.2.2.0windowsAMD64SAP.exe
osgiPackages.v1.2.windows.zip
SAPISMM8SP01_00-10007429.SAR - SAP Management Modules
I have one NonFatalErrors. I found that i can ignore it.
Summary
Installation: Successfulwith errors.
395 Successes
0 Warnings
1 NonFatalErrors
0 FatalErrors
Execute ANT Script: Script:
Status: ERROR
Additional Notes: ERROR - D:\usr\sap\ccms\wilyintroscope\install\em.installer.exec.ant15.xml:451: exec returned: 1 -
SCOM 2012 CA Wily Introscope Integration
Hello,
I want to integrate CA Wily Introscope into our SCOM 2012 environment. There is an Integration xml (CAWily.Introscope.Integration.xml) which I can include as management pack into SCOM. After this I see 4 charts but no information in it. SCOM agent
is running on Introscope MOM Servers and Collectors and the Intrscope discovery function is active at SCOM. It seems to me that the discovery can not find the Introscope servers.
Is there anything to activate on Introscope?
Has anybody experience with this integration?
Regards, DoreenHi,
Do you mean that you want to use SCOM to moitor Introscope server? Do you have the corresponding management pack imported to the management group?
Based on my research, CA Wily Introscope is also a monitoring tool. If you are looking for ways to combine both the two monitoring tools together, I have to say that it may not be supported. As they are totally different and I am not familar with CA
Wily Introscope, please also post on the vendor forum to get more support.
Regards,
Yan Li
Regards, Yan Li -
Error while installing Wily Introscope
Hi All,
I have installed introscope enterprise manager 8 in solution manager 7.0 (SP15). i have follwed the below steps:
1. Installation and Setup of SAP Solution Manager Server:
upgrading SAP Solution Manager Diagnostics (SMD) package
running Diagnostic setup wizard
everything went successful.
in the next step of wily introscope installation i have followed the below steps:
2. installing CA Wily Introscope
I. Download Third-Party External Component Package from CA Wily
II. elected Platform Independent Introscope Installer
III. Extracted the Introscope Installer
IV. Added the External Component Package
V. Started the Installer
VI. Verified the Installation
VII.Installed the SAP Management Modules
VIII.Ran the Enterprise Manager from OS level (AIX)
IX. Checked That Introscope Is Running Properly
X. Extracted the Introscope Agent
XI. Created an AutoProbe Connector
XII. Activated the Agent: Setting up Java VM Parameters -
here I am facing the issue
in the installation manual it has been given to add the below java parameters to server node:
-Xbootclasspath/p:/usr/sap/ccms/wily/connectors/connector.jar:/usr/sap/ccms/wily/Agent.jar
-Dcom.wily.introscope.agentProfile=/usr/sap/ccms/wily/IntroscopeAgent.profile
-Dcom.wily.introscope.agent.agentName=<AgentName>
i have added the above parameters and resterted the server then the java engine is not coming up. conflicting with the first parameter. once I remove that parameter I am able to up the java engine.
without being added the above parameters " the agent will not start".
please help me in this.
thanks in advance
Mohan KMohan,
I have the same problem. That is I set up the SMD on the managed system and completed the Managed system configuration through Solman which Installed Wily Introscope. With Wily enabled , the Java server process does not start.
If I delete the 3 lines that have wily in it, it starts OK.
How did you resolve this problem. Please let me know in detail.
Thank you.
Ravi -
Wily Introscope is not running in Solution Manager 7.1 and tech monitoring
Hi Experts,
we are able to log in wily introscope, But metrics(values) are not coming in wily
we re started the solution manager server, that port is working fine now, Please assist me on this to fix issue find log as attachment.
2)we configure the technical monitoring in our solution manager system but metrics are not coming for dialog response time in dash board. which extractor i need to check how to troubleshoot,
thanks in advance for you help
Best RegHi Srivastav.
Actually i am new to solution manager, and we have done basic steps of solution manager like
system preparation,basic configuration,managed system configuration and technical monitoring,
in tech monitoring system monitoring,and EUEM and we are planing to perform DVM and RBPD,
my solution manager system is installed on windows 2008 server, version is 7.1 SP 7,
currently we facing issue in wily introscope and technical monitoring dash boards metrics are not appearing and please tell me how to close the thread ,
Best Regards,
Hanuman -
Wily Introscope 8.2.2 - No License for Wrapper service
Hi All,
I've installed the Wily Introscope Manager 8.2.2. When starting the EM service, I get the following error message in the log file:
STATUS | wrapper | 2010/09/20 15:10:47 | --> Wrapper Started as Service
STATUS | wrapper | 2010/09/20 15:10:47 | Java Service Wrapper Standard Edition 32-bit 3.3.6
STATUS | wrapper | 2010/09/20 15:10:47 | Copyright (C) 1999-2009 Tanuki Software, Ltd. All Rights Reserved.
STATUS | wrapper | 2010/09/20 15:10:47 | http://wrapper.tanukisoftware.org
STATUS | wrapper | 2010/09/20 15:10:47 |
ERROR | wrapper | 2010/09/20 15:10:47 | License Error:
ERROR | wrapper | 2010/09/20 15:10:47 | A valid license was not found in the Wrapper configuration file.
ERROR | wrapper | 2010/09/20 15:10:47 |
ERROR | wrapper | 2010/09/20 15:10:47 | A license can be obtained from the Java Service Wrapper site:
ERROR | wrapper | 2010/09/20 15:10:47 | http://wrapper.tanukisoftware.org/doc/english/purchase.html
I believe that Wily is licensed as part of the Solution Manager Enterprise edition. So why do I need to buy an additional license?
Regards,
MasoudHi
For the Wily Introscope Enterprise Manager 8.2 the error you described
occurs if the em-include.conf file is missing in the EM' installation.
This file is included into the SAP managed modules SAPISMM02_0*.SAR
file.
Note that for Wily Introscope EM 8.2.2 you need to install the SAP
management modules after the installation of the EM 8.2.2 AND before
you attempt to start the service
Please refer to the Node 797147 for the documentation about the
the SAPISMM02_0*.SAR - management modules to be installed on top of
Enterprise Manager.
Please consider additionally the Note 1273028
- The Enterprise Manager can only be launched as Windows Service
after the latest management module package (SAPISMM) has been
installed. The SAPISMM package contains a file em-include.conf
which is required.
I would like to ask you to implement the Note 1273028 and to retest the
issue.
Best Regards
Jai Wardhan -
Extend Wily Introscope in Solution Manager
Hello, Could I monitor other non SAP solutions in Solution Manager?
I need to integrate all systems that are intended for monitoring (SAP
and non SAP systems) to Solution Manager
What is the scope of Wily Introscope in Solution Manager? Is the scope
only with SAP products or I could extend Introscope's capabilities to
other products?
Thanks for your help
Best regards
Edgar Rafael Escobar MolinaWhat is the scope of Wily Introscope in Solution Manager? Is the scope
only with SAP products or I could extend Introscope's capabilities to
other products?
The Introscope coming with SolMan is only a part of the full Introscope suite. It contains only those applications necessary to monitor SAP systems. For other non-SAP systems you would need different agents which are not delivered and must be purchased separately. I´m also not sure if the Solman license permits the usage of those agents in non-SAP environments.
Markus -
Wily introscope issue after System refresh in solman 7.1 Sp11
Hello experts,
Unable to remove old Production wily in quality system.
An new wily has installed in development box but when i run Solman_setup -> basis configuration ->cofig wily
Unable to unassign or delete old wily introscope
Thanks ,
Rahul YedapallyHi Rahul,
Check in expert mode , diagnostic agent of development system should appear in quality SMD agent administration as you are assigning DEV wily to SOLMAN QUA.
and all so make sure RFCs WEBADMIN , SOLMANDIAG and
NONE are working fine in SOLMAN.
Thanks,
Prakash Reddy Maram -
Wily Introscope Enterprise Manager fails to start due to Java Heap
Hello All,
I just installed Wily Introscope for the first time. I have successfully installed it from the log below:
Summary
Installation: Successfulwith errors.
396 Successes
0 Warnings
1 NonFatalErrors
0 FatalErrors
I also confirm that the Introscope Enterprise Manager is started as a service.
However, when i try to launch enterprise by following the path All Programs > CA Wily > Introscope 8.2.3.5 > Introscope Enterprise Manager....
I get the error below:
3/29/11 07:11:46 PM PDT [ERROR] [Manager.Bootstrap] Load all Management Modules FAILED.
3/29/11 07:11:46 PM PDT [ERROR] [Manager] The EM failed to start. Java heap space
I have also adapted my Java Heap from 512 to 1024 in EMService.conf file but I still get same error. This was the recommendation in this related forum post - Wily Introscope - EM failed to start
Please help!!!!Hello,
Like I said, I have increased the value to 1024MB and still not starting.
The corresponding section of the EMService is pasted below:
Wrapper Properties
Java Application
wrapper.java.command=jre
bin
java.exe
wrapper.working.dir=.\
Java Main class
wrapper.java.mainclass=org.tanukisoftware.wrapper.WrapperSimpleApp
Java Classpath (include wrapper.jar) Add class path elements as
needed starting from 1
wrapper.native_library=ServiceWrapper32
wrapper.java.classpath.1=./lib/ServiceWrapper32.jar
wrapper.java.classpath.2=./launcher.jar
#wrapper.java.classpath.3=
Java Library Path (location of Wrapper.DLL or libwrapper.so)
wrapper.java.library.path.1=./lib
Java Additional Parameters
Note: On 64-bit Windows only, the first additional parameter must be: -Xrs
#wrapper.java.additional.1=
wrapper.java.additional.1=-Xrs
wrapper.java.additional.2=-Djava.awt.headless=false
Initial Java Heap Size (in MB)
wrapper.java.initmemory=512
Maximum Java Heap Size (in MB)
wrapper.java.maxmemory=1024
Application parameters. Add parameters as needed starting from 1
wrapper.app.parameter.1=org.eclipse.core.launcher.Main
wrapper.app.parameter.2=-consolelog
wrapper.app.parameter.3=-noExit
wrapper.app.parameter.4=-product
wrapper.app.parameter.5=com.wily.introscope.em.product
wrapper.app.parameter.6=-install
wrapper.app.parameter.7=./product/enterprisemanager
wrapper.app.parameter.8=-configuration
wrapper.app.parameter.9=./product/enterprisemanager/configuration
Number of seconds to allow between the time that the Wrapper launches
the JVM process and the time that the JVM side of the Wrapper responds
that the application has started. 0 means never time out. Defaults to 30 seconds.
wrapper.startup.timeout=300
Please help -
Reorganization of wily Introscope data on file system level
Hello.
The central repository for Wily Introscope performance data is supposed to be on /usr/sap/ccms, on Solution Manager server.
Does anyone knows if there is a procedure to avoid this file system to grow too much? or if there are any estimation about the size this directory could reach?
Kind regards,
Fermín ÁlvarezHi,
I am also facing the same issue while starting Introscope Entraprise Manager. i.e " port already in use:8081 change the property introscope.entraprisemanger.webserver.port "
If I check the for Introscope service
bash-3.00# ps -ef | grep Intro
sm1adm 12666 12662 0 11:52:07 ? 0:00 /usr/dt/bin/dthelpview -helpVolume Intromgr
root 12817 10056 0 12:04:21 pts/1 0:00 grep Intro
And following is the output for port 8081
bash-3.00# netstat -a | grep 8081
*.8081 . 0 0 49152 0 LISTEN
Please tell me how to rectify the issue..
Thanks & Regards
Amair -
Wily Introscope for SOLMAN 7.1
Hi All,
We are configuring SAP Solution Manager 7.1
I have few doubts regarding Wily Introscope.
1. Is it necessary to install Wily Introscope on SAP SOLMAN 7.1?
2. Is it installed already with SOLMAN or need to be installed manually?
3. I need details about licensing policy of Wily Introscope.
4. If it is necessary to install please provide suitable link for installing it.
and I have one more question.
We getting waring message for Single Sign On and WEB Services Logical Port Creation in Managed System Configuration Step No. 8 Configure Automatically.
Shall we proceed with warning. or it needs to be fully performed without warning.
Please guide us.
Thanks & Regards,
IshanIshan trying to answer all your doubts:
1. Is it necessary to install Wily Introscope on SAP SOLMAN 7.1?
If you need to implement RCA then only Wily Introscope is required.
2. Is it installed already with SOLMAN or need to be installed manually?
It has to be installed manually..Just follow the standard guide..
3. I need details about licensing policy of Wily Introscope.
Good Question..I think there should be someone in your orgnisation who looks after the licencing..Ask him to give a call to SAP..
4. If it is necessary to install please provide suitable link for installing it.
Follow this link :
http://www.scribd.com/doc/36673011/Wily-Intro-Scope-8-Installation-Guide
Thanks & Regards,
Joydeep -
How to add managed system in Wily introscope system
Hi All,
Can anyone provide the document on how to add managed system in Wily Introscope?
With Regards
AshutoshHello,
The documentation for WilyIntroscope is located at
http://service.sap.com/diagnostics
> Media Library
Here you can find user guides and installation guides for WilyIntroscope.
But the overview is you install Enterprise Manager on a server that becomes the EM Server and then IS Agents on the managed system. There is an installation guide for EM and this ISAGENT setup is part of managed system setup in Solman_setup.
Your tools to manage are Webview and Workstation, and there is documentation for these at the above mentioned link as well.
Regards,
Paul
Maybe you are looking for
-
when i try to display some special char, e.g '�' (ascii code 196 )in java it cannot display. The char is correctlly store in java. why cannot dispaly ?? could any one give my some idea ?
-
My MacBook is running very slow.
Yesterday I added a second Thunderbolt monitor. I'm not sure if it is the cause of slowness or if I have too many programs, a virus or what. In doing research I found EtreCheck which I ran. Here are the results. Can anyone suggest what I need to d
-
Mail says its sending double emails
When I send a single email in the apple mail program, the progress report says it's sending two emails. When receiving emails it also exaggerates the number of emails that it is downloading from the server, e.g. it will say it's receiving four email
-
SSO Configuration in Netweaver - java.
Hi, Can some one tell me how to cinfigure SSO for Netweaver AS. We have java applications deployed on different machines; We need SSO for them. User will login to Machine X; and gets a tickets; then with the same ticket, logged in user should be able
-
[help] materialized view lost + duplicated data on remote - Fast Refresh
I created materialized view by "FAST REFRESH": MASTER: create SNAPSHOT log on XXX with rowid; REMOTE: create snapshot XXX REFRESH fast START WITH SYSDATE NEXT SYSDATE + 1/86400 with rowid as select * from XXX@DB_LINK; -> I had many transactions inser