Wily Introscope manager 8

I've installed Wily introscope manager 8 on a Solman 7 EHP1 Stack 18 system. When I go into diagnostics setup- managed systems - introscope agent it says enterprise manager version 7.2. I haven't even installed wily enterprise manager before so why is a previous version showing up?

I know EHP1 SPS18 has some issues.
This might be one of them.
You might be best of upgrading to SPS19.
Not really helpfull, but unfortunately I don't have a clue why it's showing wrong version.

Similar Messages

  • Wily Introscope Manager

    Guys,
    I have some questions about Wily Introscope Manager.
    What is the difference between Wily Introscope Manager Workstation and WebView?
    I noticed that some data are not collected from Wily Agents, for instance: CPU, Servlets and so on..How can I solve those issues?
    In the lens area, where the Wily Agents are located for the same server there are two kinds of classifications, such as: SAP HostAgent SMD 96 and <SID>_DVE..._servername. What is the difference between them?
    Thank you so much again Experts
    Rer

    Hello Rer,
    What is the difference between Wily Introscope Manager Workstation and WebView?
    Webview = Html version using Microsoft SIlverlight
    Workstation (also called Investigator) = Java version
    The latest is recommended since it has more features and it is more stable.
    I noticed that some data are not collected from Wily Agents, for instance: CPU, Servlets and so on..How can I solve those issues?
    See the SMD Agent log files, it is responsible for such data. Report problems here or in customer message.
    In the lens area, where the Wily Agents are located for the same server there are two kinds of classifications, such as: SAP HostAgent SMD 96 and <SID>_DVE..._servername. What is the difference between them?
    These two locations are below the trees SAP HostAgent Process and SAP Netweaver. The first one is the host data + abap data (extracted from SMD Agent, SAP HostAgent, sapOsCol) and the second is Netweaver data extracted from the Introscope Agent.
    Problems in the first node, check smd agents, setup wizards.
    Problems in the second, check introscope setup.
    Best regards,
    Guilherme

  • Wily Introscope 8.2.2 - No License for Wrapper service

    Hi All,
    I've installed the Wily Introscope Manager 8.2.2. When starting the EM service, I get the following error message in the log file:
    STATUS | wrapper  | 2010/09/20 15:10:47 | --> Wrapper Started as Service
    STATUS | wrapper  | 2010/09/20 15:10:47 | Java Service Wrapper Standard Edition 32-bit 3.3.6
    STATUS | wrapper  | 2010/09/20 15:10:47 |   Copyright (C) 1999-2009 Tanuki Software, Ltd.  All Rights Reserved.
    STATUS | wrapper  | 2010/09/20 15:10:47 |     http://wrapper.tanukisoftware.org
    STATUS | wrapper  | 2010/09/20 15:10:47 |
    ERROR  | wrapper  | 2010/09/20 15:10:47 | License Error:
    ERROR  | wrapper  | 2010/09/20 15:10:47 | A valid license was not found in the Wrapper configuration file.
    ERROR  | wrapper  | 2010/09/20 15:10:47 |
    ERROR  | wrapper  | 2010/09/20 15:10:47 | A license can be obtained from the Java Service Wrapper site:
    ERROR  | wrapper  | 2010/09/20 15:10:47 |   http://wrapper.tanukisoftware.org/doc/english/purchase.html
    I believe that Wily is licensed as part of the Solution Manager Enterprise edition. So why do I need to buy an additional license?
    Regards,
    Masoud

    Hi 
    For the Wily Introscope Enterprise Manager 8.2 the error you described
    occurs if the em-include.conf file is missing in the EM' installation.
    This file is included into the SAP managed modules SAPISMM02_0*.SAR
    file.
    Note that for Wily Introscope EM 8.2.2 you need to install the SAP
    management modules after the installation of the EM 8.2.2 AND before
    you attempt to start the service
    Please refer to the Node 797147 for the documentation about the
    the SAPISMM02_0*.SAR - management modules to be installed on top of
    Enterprise Manager.
    Please consider additionally the Note 1273028
    - The Enterprise Manager can only be launched as Windows Service
    after the latest management module package (SAPISMM) has been
    installed. The SAPISMM package contains a file em-include.conf
    which is required.
    I would like to ask you to implement the Note 1273028 and to retest the
    issue.
    Best Regards
    Jai Wardhan

  • Wily Introscope on high availabilty

    Hi All,
    Our solution Manger is on high availabilty. We want to install Wily Introscope manager on our Solution Manager. How can we install it on high availabilty. Please help.
    Also Wily Agents(on managed systems) need to be installed on only Stand Alone Java Systems or on ABAP+JAVA systems also.
    Appreciate your help.
    Thanks and Regards,
    Subashree

    Hello Subashreekannan ,
    To setup the EM in a cluster scenario you may refer to the [Wily Introscope Setup Guide 8.0 |https://websmp204.sap-ag.de/~sapdownload/011000358700001995842008E/SAPISDOC02_0.pdf] in section "Enterprise Manager Cluster Setup".
    To setup the EM in a Failover scenario, you may refer to the [Wily Adminsitration and configuration guide|http://www.scribd.com/doc/44471028/Introscope8-0-2-0ConfigAdminGuide] in section "Using MOM Hot Failover".
    Regarding the ISAgent, the Introscope Agent setup should be performed for JAVA and dual stack systems. It is not neessary to perform the ISAgent setup only for pure ABAP systems.
    Regards,
    Allam

  • Wily Introscope

    Hi,
    We want to cofigure the Wily Introscope manager to monitor the MDM system from solution manager.Our solution manager4.0 is in patch 12 .
    Kindly let us know the steps for this.
    Best Regards,
    Prakash.

    HI,
    kindly go through the Wily introscope installation guide available in marketplace.
    It also contains steps for deployment of EM.
    Regards,
    Kaustubh.

  • Wily Introscope issue

    Hi All,
    We are unable to start Wily Introscope manager.Once start generating Java heap dump and went to down status.Please find the Log file details below and give your suggestion to resolve this issue.
    Module=/usr/sap//wilyintroscope/jre/bin/libj9jit23.so
    Module_base_address=0900000004620000
    Target=2_30_20071004_14218_BHdSMr (AIX 6.1)
    CPU=ppc64 (16 logical CPUs) (0x980000000 RAM)
    JVMDUMP006I Processing Dump Event "gpf", detail "" - Please Wait.
    JVMDUMP007I JVM Requesting System Dump using '/usr/sap/<SID>/wilyintroscope/core.20140724.183547.26476614.dmp'
    JVMDUMP010I System Dump written to /usr/sap/<SID>/wilyintroscope/core.20140724.183547.26476614.dmp
    JVMDUMP007I JVM Requesting Snap Dump using '/usr/sap/<SID>/wilyintroscope/Snap0002.20140724.183547.26476614.trc'
    JVMDUMP010I Snap Dump written to /usr/sap/<SID>/wilyintroscope/Snap0002.20140724.183547.26476614.trc
    JVMDUMP007I JVM Requesting Java Dump using '/usr/sap/<SID>/wilyintroscope/javacore.20140724.183547.26476614.txt'
    JVMDUMP012E Error in Java Dump: /usr/sap/<SID>/wilyintroscope/javacore.20140724.183547.26476614.txt
    JVMDUMP013I Processed Dump Event "gpf", detail "".
    JVMJ9GC028E Option too large: '-Xmx4096m'
    JVMJ9VM015W Initialization error for library j9gc23(2): Failed to initialize; unable to parse command line
    Could not create the Java virtual machine.
    Regards,
    MK

    Hi,
    Plz find the java core details below.
    NULL           ------------------------------------------------------------------------
    0SECTION       TITLE subcomponent dump routine
    NULL           ===============================
    1TISIGINFO     Dump Event "gpf" (00002000) received
    1TIDATETIME    Date:                 2014/07/24 at 18:36:07
    1TIFILENAME    Javacore filename:    /usr/sap/<SID>/wilyintroscope/javacore.20140724.183547.26476614.txt
    NULL           ------------------------------------------------------------------------
    0SECTION       GPINFO subcomponent dump routine
    NULL           ================================
    2XHOSLEVEL     OS Level         : AIX 6.1
    2XHCPUS        Processors -
    3XHCPUARCH       Architecture   : ppc64
    3XHNUMCPUS       How Many       : 16
    NULL
    1XHEXCPCODE    J9Generic_Signal_Number: 0000000000000004
    1XHEXCPCODE    Signal_Number: 000000000000000B
    1XHEXCPCODE    Error_Value: 0000000000000000
    1XHEXCPCODE    Signal_Code: 0000000000000033
    1XHEXCPCODE    Handler1: 09001000A0C39D58
    1XHEXCPCODE    Handler2: 09001000A0C31E38
    NULL
    1XHEXCPMODULE  Module: /usr/sap/<SID>/wilyintroscope/jre/bin/libj9jit23.so
    1XHEXCPMODULE  Module_base_address: 0900000004620000
    NULL
    1XHREGISTERS   Registers:
    2XHREGISTER      R0:0000000000000002
    2XHREGISTER      R1:0FFFFFFFFFFFE150
    2XHREGISTER      R2:0000000000000002
    2XHREGISTER      R3:0000000000000002
    2XHREGISTER      R4:0000000000000002
    2XHREGISTER      R5:07000000002982C8
    2XHREGISTER      R6:0000000115E80F09
    2XHREGISTER      R7:0000000000000018
    2XHREGISTER      R8:0000000115F565B0
    2XHREGISTER      R9:0000000115D1B089
    2XHREGISTER      R10:FFFFFFFFFFFFFFFF
    2XHREGISTER      R11:0900000004654EB0
    2XHREGISTER      R12:000000011A1B7E9F
    2XHREGISTER      R13:0000000110011200
    0SECTION       ENVINFO subcomponent dump routine
    NULL           =================================
    1CIJAVAVERSION J2RE 5.0 IBM J9 2.3 AIX ppc64-64 build j9vmap6423-20071007
    1CIVMVERSION   VM build 20071004_14218_BHdSMr
    1CIJITVERSION  JIT enabled - 20070820_1846ifx1_r8
    1CIRUNNINGAS   Running as a standalone JVM
    1CICMDLINE     ./jre/bin/java -Xms512m -Xmx4096m -Djava.awt.headless=true -Dsun.java2d.noddraw=true -Dorg.osgi.framework.bootdelegation=org.apache.xpath com.zerog.lax.L
    AX /usr/sap/<SID>/wilyintroscope/bin/../Introscope_Enterprise_Manager.lax /tmp/env.properties.26476614
    1CIJAVAHOMEDIR Java Home Dir:   /usr/sap/<SID>/wilyintroscope/jre
    1CIJAVADLLDIR  Java DLL Dir:    /usr/sap/<SID>/wilyintroscope/jre/bin
    1CISYSCP       Sys Classpath:   /usr/sap/<SID>/wilyintroscope/jre/lib/vm.jar;/usr/sap/<SID>/wilyintroscope/jre/lib/core.jar;/usr/sap/<SID>/wilyintroscope/jre/lib/charsets.jar
    ;/usr/sap/<SID>/wilyintroscope/jre/lib/graphics.jar;/usr/sap/<SID>/wilyintroscope/jre/lib/security.jar;/usr/sap/<SID>/wilyintroscope/jre/lib/ibmpkcs.jar;/usr/sap/<SID>/wilyintr
    oscope/jre/lib/ibmorb.jar;/usr/sap/<SID>/wilyintroscope/jre/lib/ibmcfw.jar;/usr/sap/<SID>/wilyintroscope/jre/lib/ibmorbapi.jar;/usr/sap/<SID>/wilyintroscope/jre/lib/ibmjcefw.
    jar;/usr/sap/<SID>/wilyintroscope/jre/lib/ibmjgssprovider.jar;/usr/sap/<SID>/wilyintroscope/jre/lib/ibmjsseprovider2.jar;/usr/sap/<SID>/wilyintroscope/jre/lib/ibmjaaslm.jar;/
    usr/sap/<SID>/wilyintroscope/jre/lib/ibmcertpathprovider.jar;/usr/sap/<SID>/wilyintroscope/jre/lib/server.jar;/usr/sap/<SID>/wilyintroscope/jre/lib/xml.jar;
    1CIUSERARGS    UserArgs:
    2CIUSERARG               -Xmx256M
    2CIUSERARG               -Xj9
    2CIUSERARG               -Xjcl:jclscar_23
    2CIUSERARG               -Dcom.ibm.oti.vm.bootstrap.library.path=/usr/sap/<SID>/wilyintroscope/jre/bin
    2CIUSERARG               -Dsun.boot.library.path=/usr/sap/<SID>/wilyintroscope/jre/bin
    2CIUSERARG               -Djava.library.path=/usr/sap/<SID>/wilyintroscope/jre/bin:/usr/sap/<SID>/wilyintroscope/jre/bin:/usr/sap/<SID>/wilyintroscope/jre/bin/classic:/usr/sa
    p/<SID>/wilyintroscope/jre/bin:/usr/sap/<SID>/SYS/exe/run:/usr/sap/<SID>/wilyintroscope/jre/bin/j9vm:/usr/lib
    2CIUSERARG               -Djava.home=/usr/sap/<SID>/wilyintroscope/jre
    2CIUSERARG               -Djava.ext.dirs=/usr/sap/<SID>/wilyintroscope/jre/lib/ext
    2CIUSERARG               -Duser.dir=/usr/sap/<SID>/wilyintroscope
    2CIUSERARG               _j2se_j9=70912 0x09001000A048F3E8
    2CIUSERARG               vfprintf 0x0000000110001910
    2CIUSERARG               -Xms512m
    2CIUSERARG               -Xmx4096m
    2CIUSERARG               -Djava.awt.headless=true
    2CIUSERARG               -Dsun.java2d.noddraw=true
    2CIUSERARG               -Dorg.osgi.framework.bootdelegation=org.apache.xpath
    2CIUSERARG               -Dinvokedviajava
    2CIUSERARG               -Djava.class.path=/usr/sap/<SID>/wilyintroscope/bin/../launcher.jar:/usr/sap/<SID>/wilyintroscope/bin/../lax.jar:
    2CIUSERARG               vfprintf
    2CIUSERARG               _port_library 0x09001000A048FDF0
    2CIUSERARG               -Xdump
    Regards,
    MK

  • Wily Introscope Clarification

    Can someone help clarify where I'm supposed to install the Wily Introscope Manager?
    I installed on my solution manager server, is that correct?
    I thought that the Wily Manager goes on Solution manager server and the wily agent goes on sap web applications.  Please help me clarify.
    thanks.

    Hi,
    You have to install the ISAGENT on solman only. Later you deploy it on managed systems via:
    http://<server IP>:<port>/SMD
    Managed systems-> introscope agent
    If you mean the Enterprise Manager it's installed normally on the SOLMAN host. On windows it runs as a Service.
    For official documentation:
    Introscope Version 8 Installation Guide For SAP:
    https://websmp104.sap-ag.de/~sapidb/011000358700001995842008E.PDF
    On page 4 you'll find nice explanation regarding your question.
    and also check: Note 797147 - Wily Introscope Installation for SAP Customers
    Cheers,
    Diego.

  • Introscope Manager on Server 2012

    We are have solution manager 7.1 SP 8, we start to Install Wily Introscope Manager 9.1.5.
    we are download the required files Wily_IS_EM15* for Windows X64.
    we uncar files in folder Drive\usr\sap\CCM\apmintroscope.
    Windows 2012
    CA Wily Introscope OSGI 9.1.5.0
    CA Wily Enterprise Manager 9 SP15
    Extract CA Wily Enterprise Manager
    Copy eula.txt into the extracted folder.
    Accept the agreements in eula.txt and ca-eula.txt
    Update the installer.properties file as necessary
    Copy the CA Wily Introscope OSGI zip file into the extracted folder
    Run the Introscope9.1.5.0windowsAMD64SAP.exe
    We didn't find any run process for introscope.
    Although we are install the same version on Server 2003&2008R2 and it's completely successfully.
    Why this exe file didn't work on server 2012?

    Hi Said,
    Sorry, but can you clarify which server are you referring to as develop ABAP server ?
    Is that a Managed system ?
    Hope you are performing Introscope EM installation on Solution Manager host.
    LM-Service component has to be checked in Solution Manager system (part of Solution Manager Java stack).
    If you want to use Introscope EM 9.1.5.0, then please ensure that the LM-Service component has appropriate patch level as per SAP Note 1565954 - Introscope 9 Release Notes
    Also, have you manually created the folder apmintroscope under E drive ?
    Please check the Wily guide at below link if you want to customize the path for Wily EM installation, other than the default C:\usr\sap\ccms\apmintroscope.
    http://service.sap.com/instguides -> Installation & Upgrade Guides -> SAP Components -> SAP Solution Manager -> Release 7.1 -> Installation -> Wily Introscope Setup Guide 9.*
    Hope this helps.
    Thanks & Regards,
    Nisha

  • Wily Introscope is not running in Solution Manager 7.1 and tech monitoring

    Hi Experts,
    we are able to log in wily introscope, But metrics(values) are not coming in wily
    we re started the solution manager server, that port is working fine now, Please assist me on this to fix issue find log as attachment.
    2)we configure the technical monitoring in our solution manager system but metrics are not coming for dialog response time in dash board. which extractor i need to check how to troubleshoot,
    thanks in advance for you help
    Best Reg

    Hi Srivastav.
    Actually i am new to solution manager, and we have done basic steps of solution manager like
    system preparation,basic configuration,managed system configuration and technical monitoring,
    in tech monitoring system monitoring,and EUEM and we are planing to perform DVM and RBPD,
    my solution manager system is installed on windows 2008 server, version is 7.1 SP 7,
    currently we facing issue in wily introscope and technical monitoring dash boards metrics are not appearing and please tell me how to close the thread ,
    Best Regards,
    Hanuman

  • Wily Introscope is not running in Solution Manager 7.1

    Hello Experts,
    wily Introscope is not running in solution manager system,
    below error getting in log, solution manager is running on windows server and how to start wily in windows.
    8/23/14 11:58:50.088 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
    8/23/14 11:58:50.090 AM IST [INFO] [WrapperSimpleAppMain] [Manager]
    ****** CA Wily Introscope License ******
      type = em-sap
      rev = 30
      cid = sap-ags
      organization = SAP Active Global Support
      reg-id = sap-end-user
      email = none
      sum = 27618b562bc2239e3cf71d9542c76df4
    8/23/14 11:58:50.091 AM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
    8/23/14 11:58:50.113 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
    8/23/14 11:58:52.343 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
    8/23/14 11:58:52.343 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
    8/23/14 11:58:52.412 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
    8/23/14 11:58:52.628 AM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
    8/23/14 11:58:52.645 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
    8/23/14 11:58:52.655 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
    8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
    8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
    8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
    8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
    8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
    8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
    8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
    8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager]
    ****** CA Wily Introscope License ******
      type = em-sap
      rev = 30
      cid = sap-ags
      organization = SAP Active Global Support
      reg-id = sap-end-user
      email = none
      sum = 27618b562bc2239e3cf71d9542c76df4
    8/23/14 12:02:31.586 PM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
    8/23/14 12:02:31.602 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
    8/23/14 12:02:31.958 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
    8/23/14 12:02:31.959 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
    8/23/14 12:02:32.030 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
    8/23/14 12:02:32.287 PM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
    8/23/14 12:02:32.306 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
    8/23/14 12:02:32.321 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
    8/23/14 12:37:05.225 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
    8/23/14 12:37:05.227 PM IST [INFO] [WrapperSimpleAppMain] [Manager]
    ****** CA Wily Introscope License ******
      type = em-sap
      rev = 30
      cid = sap-ags
      organization = SAP Active Global Support
      reg-id = sap-end-user
      email = none
      sum = 27618b562bc2239e3cf71d9542c76df4
    8/23/14 12:37:05.228 PM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
    8/23/14 12:37:05.249 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
    8/23/14 12:37:05.644 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
    8/23/14 12:37:05.644 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
    8/23/14 12:37:05.728 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
    8/23/14 12:37:05.994 PM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
    8/23/14 12:37:06.014 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
    8/23/14 12:37:06.028 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
    Please assist me on this
    Best Regards
    Hanuman

    Hello Srivastav,
    i am getting below problem in wily introscope log
    9/01/14 11:22:02.675 AM IST [ERROR] [WrapperSimpleAppMain] [Manager.Acceptor] Failed to bind to server socket
    java.net.BindException: Address already in use: bind
      at sun.nio.ch.Net.bind(Native Method)
      at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:126)
      at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:59)
      at com.wily.isengard.postofficehub.link.server.Acceptor.<init>(Acceptor.java:72)
      at com.wily.isengard.postofficehub.link.server.ConnectionListenerFactory.create(ConnectionListenerFactory.java:31)
      at com.wily.isengard.postoffice.server.PostOfficeHubServer.startIncomingConnectionListener(PostOfficeHubServer.java:261)
      at com.wily.isengard.postoffice.server.PostOfficeHubServer.startAllIncomingConnectionListeners(PostOfficeHubServer.java:235)
      at com.wily.isengard.postoffice.server.PostOfficeHubServer.acceptIncomingHubConnections(PostOfficeHubServer.java:103)
      at com.wily.isengard.api.server.IsengardControllerServer.acceptIncomingConnections(IsengardControllerServer.java:207)
      at com.wily.isengard.api.samplemain.SampleMain.acceptIncomingConnections(SampleMain.java:117)
      at com.wily.introscope.server.enterprise.EnterpriseServer.initialize(EnterpriseServer.java:708)
      at com.wily.introscope.server.enterprise.EnterpriseServer.doStart(EnterpriseServer.java:358)
      at com.wily.util.ALifeCycle.start(ALifeCycle.java:86)
      at com.wily.introscope.server.enterprise.EnterpriseServer.<init>(EnterpriseServer.java:301)
      at com.wily.introscope.server.enterprise.EnterpriseServer.<init>(EnterpriseServer.java:280)
      at com.wily.introscope.server.enterprise.EnterpriseServer.start(EnterpriseServer.java:1444)
      at com.wily.introscope.em.internal.Activator.startEM(Activator.java:116)
      at com.wily.introscope.em.internal.Application.start(Application.java:27)
      at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:193)
      at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
      at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
      at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
      at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
      at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
      at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
      at org.eclipse.equinox.launcher.Main.main(Main.java:1212)
      at org.eclipse.core.launcher.Main.main(Main.java:30)
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      at org.tanukisoftware.wrapper.WrapperSimpleApp.run(WrapperSimpleApp.java:244)
      at java.lang.Thread.run(Thread.java:662)
    9/01/14 11:22:02.679 AM IST [INFO] [WrapperSimpleAppMain] [Manager.PostOfficeHub] Server listening for incoming default socket connections on port 6001
    9/01/14 11:22:02.682 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Connection Initiator listening...
    9/01/14 11:22:02.684 AM IST [INFO] [WrapperSimpleAppMain] [Manager.MMHotDeployEntity] Will monitor D:\usr\sap\CCMS\apmintroscope\deploy for new files every 60 seconds
    9/01/14 11:22:02.685 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager started with management module warnings.
    9/01/14 11:22:42.883 AM IST [INFO] [PO:main Mailman 1] [Manager.LoadBalancer] Loaded loadbalancing.xml
    9/01/14 11:23:31.817 AM IST [INFO] [btpool0-1] [Manager] User "Admin" logged in successfully from host "localhost"
    9/01/14 11:23:31.825 AM IST [INFO] [btpool0-1] [Manager] request.getContextPath() /webview
    9/01/14 11:23:31.826 AM IST [INFO] [btpool0-1] [Manager] Login event Admin 1667ryb11leum 10.1.0.133 true
    9/01/14 11:51:30.061 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409164200000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.063 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409077800000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.064 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409423400000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.066 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409337000000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.067 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409250600000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.088 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1406831400000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.089 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1408991400000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.090 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1408905000000.data seems to be OK - not sure what to do with append inputs
    Please help me to sort this issue,
    Best Regards,
    Hanuman Chinthalwar

  • Extend Wily Introscope in Solution Manager

    Hello, Could I monitor other non SAP solutions in Solution Manager?
    I need to integrate all systems that are intended for monitoring (SAP
    and non SAP systems) to Solution Manager
    What is the scope of Wily Introscope in Solution Manager? Is the scope
    only with SAP products or I could extend Introscope's capabilities to
    other products?
    Thanks for your help
    Best regards
    Edgar Rafael Escobar Molina

    What is the scope of Wily Introscope in Solution Manager? Is the scope
    only with SAP products or I could extend Introscope's capabilities to
    other products?
    The Introscope coming with SolMan is only a part of the full Introscope suite. It contains only those applications necessary to monitor SAP systems. For other non-SAP systems you would need different agents which are not delivered and must be purchased separately. I´m also not sure if the Solman license permits the usage of those agents in non-SAP environments.
    Markus

  • Wily Introscope Enterprise Manager fails to start due to Java Heap

    Hello All,
    I just installed Wily Introscope for the first time. I have successfully installed it from the log below:
    Summary
    Installation: Successfulwith errors.
    396 Successes
    0 Warnings
    1 NonFatalErrors
    0 FatalErrors
    I also confirm that the Introscope Enterprise Manager is started as a service.
    However, when i try to launch enterprise by following the path All Programs > CA Wily > Introscope 8.2.3.5 > Introscope Enterprise Manager....
    I get the error below:
    3/29/11 07:11:46 PM PDT [ERROR] [Manager.Bootstrap] Load all Management Modules FAILED.
    3/29/11 07:11:46 PM PDT [ERROR] [Manager] The EM failed to start. Java heap space
    I have also adapted my Java Heap from 512 to 1024 in EMService.conf file but I still get same error. This was the recommendation in this related forum post - Wily Introscope - EM failed to start
    Please help!!!!

    Hello,
    Like I said, I have increased the value to 1024MB and still not starting.
    The corresponding section of the EMService is pasted below:
    Wrapper Properties
    Java Application
    wrapper.java.command=jre
    bin
    java.exe
    wrapper.working.dir=.\
    Java Main class
    wrapper.java.mainclass=org.tanukisoftware.wrapper.WrapperSimpleApp
    Java Classpath (include wrapper.jar)  Add class path elements as
    needed starting from 1
    wrapper.native_library=ServiceWrapper32
    wrapper.java.classpath.1=./lib/ServiceWrapper32.jar
    wrapper.java.classpath.2=./launcher.jar
    #wrapper.java.classpath.3=
    Java Library Path (location of Wrapper.DLL or libwrapper.so)
    wrapper.java.library.path.1=./lib
    Java Additional Parameters
    Note: On 64-bit Windows only, the first additional parameter must be: -Xrs
    #wrapper.java.additional.1=
    wrapper.java.additional.1=-Xrs
    wrapper.java.additional.2=-Djava.awt.headless=false
    Initial Java Heap Size (in MB)
    wrapper.java.initmemory=512
    Maximum Java Heap Size (in MB)
    wrapper.java.maxmemory=1024
    Application parameters.  Add parameters as needed starting from 1
    wrapper.app.parameter.1=org.eclipse.core.launcher.Main
    wrapper.app.parameter.2=-consolelog
    wrapper.app.parameter.3=-noExit
    wrapper.app.parameter.4=-product
    wrapper.app.parameter.5=com.wily.introscope.em.product
    wrapper.app.parameter.6=-install
    wrapper.app.parameter.7=./product/enterprisemanager
    wrapper.app.parameter.8=-configuration
    wrapper.app.parameter.9=./product/enterprisemanager/configuration
    Number of seconds to allow between the time that the Wrapper launches
    the JVM process and the time that the JVM side of the Wrapper responds
    that the application has started. 0 means never time out. Defaults to 30 seconds.
    wrapper.startup.timeout=300
    Please help

  • How to add managed system in Wily introscope system

    Hi All,
    Can anyone provide the document on how to add managed system in Wily Introscope?
    With Regards
    Ashutosh

    Hello,
    The documentation for WilyIntroscope is located at
    http://service.sap.com/diagnostics
    > Media Library
    Here you can find user guides and installation guides for WilyIntroscope.
    But the overview is you install Enterprise Manager on a server that becomes the EM Server and then IS Agents on the managed system. There is an installation guide for EM and this ISAGENT setup is part of managed system setup in Solman_setup.
    Your tools to manage are Webview and Workstation, and there is documentation for these at the above mentioned link as well.
    Regards,
    Paul

  • Wily Introscope Enterprise Manager Can't be accessed

    Hi Experts,
    I installed Solution Manager 7.0 EHP1 and executed basic configuration. And I followed the instruction to install wily EM 8.0. But after installation, the web pages http://emhost:8081/workstation and http://emhost:8081/webview cannot be accessed. Error msg is "404 Not Found The requested resource does not exist."
    I've checked the wily log and found no errors. How to solve the problem?

    Hi ,
    Check if the installation of EM 8.0 was successful or not.
    For the same, please check <Introscopehome>/install/Introscopeinstall.log.
    I am hoping your installation is successful. Then please perform some other checks.
    Please start your Introscope Enterprise Manager service from Windows Services [ for other OS please refer to guide]
    Check the <IntroscopeHome>/log/IntroscopeEnterpriseManager.log
    file for an Error entry.. there may be a possibility that the Port 8081 [or 8080] is already in use.
    Similar format to error message :::
    "EM Web Server did not start.  Port already in use: 8080  To change the Web Server port, modify the EM property: introscope.enterprisemanager.webserver.port "
    If yes, then please modify the \conf\EnterpriseManager.properties file
    introscope.enterprisemanager.webserver.port=8080            
    OR
    introscope.enterprisemanager.webserver.port=any other open port
    For more details about changing port please refer to Thread
    Wily Introscope Enterprise Manager 7.2 is not starting on SolMan system
    I hope the provided information will be helpful.
    Best Regards,
    ~~ Pradeep Bishnoi ~~

  • Wily Introscope Version for Solution Manager 7 SPS 17

    Hi
    We have a solution manager 4 (now 7) running on an ABAP stack only, this was recently upgraded from Solution Manager 3.2 which was installed 3 years ago as ABAP stack only, this server was never powerful enough to have the Java stack added and the project did not require it.
    I am now looking to migrate this ABAP Solution Manager 7 to a new server, using ABAP & JAVA so I can make use of Solution Managaer tools like Diagnostics, RCA, WILY etc.
    On a sandpit copy I have migrated the ABAP instance to a more powerful server and added the Java Instance from the Solution Manager 4 Installation Master, so I now have a dual stack SM 4, I have patched this to SP17.
    I am looking to install Wily Introscope for monitoring, I have read Note 797147 - Wily Introscope Installation for SAP Customers, where it says you should always use the latest version of Wily, which is 8.0.2, but looking at the note, the downloads for Introscope Enterprise Manager and Introscope Workstation are from SAP SOLUTION MANAGER 7.0 EHP 1, but I am not running Solution Manager on EHP1, I am on SP Stack 17.
    Looking in the SWDC there are downloads in  SAP SOLUTION MANAGER 7.0 -> Entry by Component -> Solution Manager JAVA Stack -> WILY INTROSCOPE ENTPR MGR 8
    Is this what I should be using for my SP Stack 17, or should I use the EHP1 version?
    Also, setting up the Solution Manager Diagnostics, is there a setup PDF for Solution Manager 7 SP17 ? I cannot find a setup guide for this release, most are for EHP1, I would rather not have to implement EHP1 as part of this migration !
    Thanks for any help.
    Paul.

    Hi Bhudev
    Thanks for the reply, I presumed it was the Wily introscope 8 without the EHP1 I required.
    As for installation guide, I have think you have misunderstood my question, I already have the wily installation guide from the note location, I wanted to know if there is any Solution Manager Diagnostics setup guides for SP17 ?
    When I use transaction SOLMAN_WORKCENNTER --> System Monitoring --> Solution Manager Diagnostics --> Diagnostics System --> Diagnostics Setup --> Setup Wizard
    the first 2 (of 23) setups are failing :
    SSO The value of profile parameter login/accept_sso2_ticket could not be checked
    BI Cannot invoke CCMSBISETUP on host localhost
    Warning :
    User(BI) Role SAP_BI_E2E does not exist
    Then it says :
    To complete the Diagnostics Setup, you should perform the following operations as documented in Diagnostics Setup Guide
    I cannot find this Diagnostics Setup Guide for SP17 ?
    The installation guides are mainly for EHP1, media library under sap-ag.de/diagnostics does not show this setup guide, Master Installation guide does not mention it, so was wondering if anyone could point me in the right direction for this guide ?
    Thanks,
    Paul.

Maybe you are looking for

  • Dump in tragation J2IUN

    Hi experts, I am getting dump in J2IUN tragation ...dump analysis in st22 is as fallow Runtime Errors         DYNPRO_FIELD_CONVERSION Date and Time          31.10.2007 14:02:22 Short text Conversion error What happened? The current screen processing

  • My mac takes a long time to log on, running slow

    my imac is running slow & takes a long time logging on, anyone knows why this happens?

  • Css navigation doesn't work in IE

    I used the directions on this site, http://htmldog.com/articles/suckerfish/dropdowns/, to help me create navigation using css that would be compatible with IE However it doesn't seem to work, when I load it in IE I get "errors on page" and the drop d

  • HT1051 Changing Shipping address in Aperture?

    How does one buy an Aperture book in Australia and have it shipped directly to the US?

  • Making Fields mandatory in SM30

    Does anybody know how can we make fields in SM30 as mandatory. If we have 4 fields in some Z-table, i want to make 2 of the fields mandatory...Pls help me out.