Wily Introscope on PI production

Hello experts,
Don't know if this is the right subforum, please redirect me if this isn't the case.
We have been experiencing some memory issues on a productive PI server. I've been able to narrow down the cause to the Wily agent heartbeat, consuming massive amounts of memory over time. (using notes 743207 and 1024206)
Since the agent on the server is kind of ancient, and updating agents was still on my to-do list after the solution manager stack upgrade, i was planning on updating the agent. However, some time ago, i've read a SAP note warning customers about the fact NOT to use Wily on productive PI systems because it would introduce performance issues with PI. So, with that in mind, i was thinking of removing Wily from the productive PI server completely. (Undeploying it i guess..)
After looking into it again today, i was unable to find the note warning customers NOT to use Wily in productive PI environments. Perhaps, something has changed/solved at the side of SAP..? Anyone any ideas regarding the usage of Wily on PI productive systems?
The PI servers mentioned are all 7.1 systems, SOLMAN 7.0 EnhP. 1, Wily agent used is ISAGENT.8.2.3.5-2011-01-14
Thank you in advance!

Hi,
I have from the last two weeks a new project to identify if exist any performance problem in SAP PI 7.10 in a customer with a high volume of transactions per day (around 80.000 IDOC's in SAP from/to PI and some with 40.000 segments).
My first work was to create a report to extract information about the start time, end time, size of message, etc of the messages in PI searching tables and save throught a JOB to printer spool.
With this information I can find if some of the interfaces consumes more time comparing start time vs end time. Also I can find if some interface have a big size. When I have this information, I will review the corresponding interface (message mapping, BPM, etc) to identify if exist any solution to get best performance on it.
Also exist a specific document from SAP for performance check
See: SAP Note 894509 – PI Performance Check

Similar Messages

  • SABRIX/JBOSS monitoring with Solution Manager and Wily Introscope

    Reading SCN discussions it is not quite clear to me if an extra (Wily) license is needed for monitoring SABRIX/JBOSS with Solution Manager and Wily Introscope. Does someone have experience in this area what exact to do?

    Hi GSAP,
    Please check this pdf file:
    Wily Introscope a CA Product- Utility that Comes with Solution Manager Specifically for Java Monitoring
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50973df5-e1d1-2c10-cf89-c177fbfd7e65?QuickLink=index&…
    Thanks
    Vikram

  • Extend Wily Introscope in Solution Manager

    Hello, Could I monitor other non SAP solutions in Solution Manager?
    I need to integrate all systems that are intended for monitoring (SAP
    and non SAP systems) to Solution Manager
    What is the scope of Wily Introscope in Solution Manager? Is the scope
    only with SAP products or I could extend Introscope's capabilities to
    other products?
    Thanks for your help
    Best regards
    Edgar Rafael Escobar Molina

    What is the scope of Wily Introscope in Solution Manager? Is the scope
    only with SAP products or I could extend Introscope's capabilities to
    other products?
    The Introscope coming with SolMan is only a part of the full Introscope suite. It contains only those applications necessary to monitor SAP systems. For other non-SAP systems you would need different agents which are not delivered and must be purchased separately. I´m also not sure if the Solman license permits the usage of those agents in non-SAP environments.
    Markus

  • Wily introscope issue after System refresh in solman 7.1 Sp11

    Hello experts,
    Unable to remove old Production wily in quality system.
    An new wily has installed in development box but when i run Solman_setup -> basis configuration ->cofig wily
    Unable to unassign or delete old wily introscope
    Thanks ,
    Rahul Yedapally

    Hi Rahul,
    Check in expert mode , diagnostic agent of development system should appear in quality SMD agent administration as you are assigning DEV wily to SOLMAN QUA.
    and all so make sure RFCs WEBADMIN , SOLMANDIAG and
    NONE are working fine in SOLMAN.
    Thanks,
    Prakash Reddy Maram

  • Wily Introscope Enterprise Manager fails to start due to Java Heap

    Hello All,
    I just installed Wily Introscope for the first time. I have successfully installed it from the log below:
    Summary
    Installation: Successfulwith errors.
    396 Successes
    0 Warnings
    1 NonFatalErrors
    0 FatalErrors
    I also confirm that the Introscope Enterprise Manager is started as a service.
    However, when i try to launch enterprise by following the path All Programs > CA Wily > Introscope 8.2.3.5 > Introscope Enterprise Manager....
    I get the error below:
    3/29/11 07:11:46 PM PDT [ERROR] [Manager.Bootstrap] Load all Management Modules FAILED.
    3/29/11 07:11:46 PM PDT [ERROR] [Manager] The EM failed to start. Java heap space
    I have also adapted my Java Heap from 512 to 1024 in EMService.conf file but I still get same error. This was the recommendation in this related forum post - Wily Introscope - EM failed to start
    Please help!!!!

    Hello,
    Like I said, I have increased the value to 1024MB and still not starting.
    The corresponding section of the EMService is pasted below:
    Wrapper Properties
    Java Application
    wrapper.java.command=jre
    bin
    java.exe
    wrapper.working.dir=.\
    Java Main class
    wrapper.java.mainclass=org.tanukisoftware.wrapper.WrapperSimpleApp
    Java Classpath (include wrapper.jar)  Add class path elements as
    needed starting from 1
    wrapper.native_library=ServiceWrapper32
    wrapper.java.classpath.1=./lib/ServiceWrapper32.jar
    wrapper.java.classpath.2=./launcher.jar
    #wrapper.java.classpath.3=
    Java Library Path (location of Wrapper.DLL or libwrapper.so)
    wrapper.java.library.path.1=./lib
    Java Additional Parameters
    Note: On 64-bit Windows only, the first additional parameter must be: -Xrs
    #wrapper.java.additional.1=
    wrapper.java.additional.1=-Xrs
    wrapper.java.additional.2=-Djava.awt.headless=false
    Initial Java Heap Size (in MB)
    wrapper.java.initmemory=512
    Maximum Java Heap Size (in MB)
    wrapper.java.maxmemory=1024
    Application parameters.  Add parameters as needed starting from 1
    wrapper.app.parameter.1=org.eclipse.core.launcher.Main
    wrapper.app.parameter.2=-consolelog
    wrapper.app.parameter.3=-noExit
    wrapper.app.parameter.4=-product
    wrapper.app.parameter.5=com.wily.introscope.em.product
    wrapper.app.parameter.6=-install
    wrapper.app.parameter.7=./product/enterprisemanager
    wrapper.app.parameter.8=-configuration
    wrapper.app.parameter.9=./product/enterprisemanager/configuration
    Number of seconds to allow between the time that the Wrapper launches
    the JVM process and the time that the JVM side of the Wrapper responds
    that the application has started. 0 means never time out. Defaults to 30 seconds.
    wrapper.startup.timeout=300
    Please help

  • Wily Introscope as monitoring tool?

    Hello everybody,
    we are looking for a tool capable of monitoring Systems with usage type "java", e.g. Enterprise Portal oder Process Integration.
    Has anybody experience with Wily Introscope, e.g. concerning usability?
    Whatever experience
    Thanks a lot
    Thorben

    Yes Wily is a very usable monitoring and diagnostic toolset for the J2EE platform. This is especially true for the NetWeaver Portal. SAP has gone to great lengths to instrument the Portal Stack and provides thousands of metrics on a typical Portal and there are tools to Monitor, Analyze, Trace, Track Errors all as part of the Read-only version delivered by SAP.
    The pre-configured dashboards are quite nice. The newer release allows use of the Introscope Workstation Version 7.1 product which is more feature rich than the WebView user tool, and this is a plus.
    If you want to integrate to an automated Alerting System you'll have to buy the Solution Enablement Pack. You can read more about this at service.sap.com/diagnostics.
    Frank

  • Problem Remote Deploy Wily Introscope Agent

    Hi,
    I installed Wily Introscope EM and the Diagnostic Agent on Solution Manager (EhP1).
    Now, if I understand it, I can do a remote deploy of Introscope Agent, for example on Enterprise Portal.
    How can I do?
    Best Regards.
    Diego.

    Hi Diego,
    Do you also install an SMD agent on the portal system which one you want to managed via RCA? Also you need to run the Setup Wizard for Managed Systems for your portal.
    Please check SAP Note 1365123 - Installation of Diagnostics Agents. In this note you will find an attachment Agent_Installation_Strategy.ppt - describe the installation strategy of SMD agents and all agent rules which you need to follow.
    So one part is to get RCA running:
    1. Install a SMD agent per managed host.
    2. Define the technical system in SMSY Normal you have an SLD in your landscape and connect the Solution Manager to it or use the SLD from Solution Manager. After you define the technical system in SMSY or via SOLMAN_SETUP ->Managed System Configuration you go to Diagnostics Setup.
    3. You access this via Diagnostics work center or direct link http://solman_fqdn:<port>/smd
    4. Next go to Managed System -> Setup Wizard -> Select your to managed system <SID> - > check that system is Diagnostics Relevant (if not click on the managed products and set the relevant product for diagnostic u2013 also verify the Landscape setting light are green u2013 this means the technical system is well defined in SMSY)
    5. Click Setup <SID> Button -> on next screen you need to fill out all Java / Abap connection parameters (for the setup of Java systems you need a userid with j2ee admin rights)
    6. Please set the SMD agent in the right table u2013> Click on details arrow and then select the managed systemu2019s SMD agent and click on the set button. The SMD agent will now reboot wait until the agent is back -> Click on the Refresh button to see the status.
    7. Click Next and on the next screen you get a Summary of all setup steps
    8. Click on Setup. After the setup finished (all steps are green)
    9. Click on quit.
    Before your can deploy the IS agent from the Solution Manager you need to deploy the IS agent files via SDM to the Solution Manager. You can download the deployable IS agent from SAP Service Market Place:
    Support Packages and Patches -> Entry by Application Group -> SAP Technology Components -> SAP SOLUTION MANAGER -> SAP SOLUTION MANAGER 7.0 EHP 1 -> Entry by Components -> Agents for managed systems -> select your version for your IS EM and download the deployable agent via SolMan Diagnostics (File name like ISAGENTSMD801_01-10007435.SCA)
    Now you can start with the setup of the Introscope Agent (on the left menu bar under application selection).
    On the selection screen select first your IS Enterprise Manager then the IS Agent settings the relevant system.
    In the table select the J2EE node for which want you setup the agent (this need to be done for each Server node u2013 the IS agent runs inside of the J2EE node per server)
    Then click on Setup Introscope Agent u2026 Button u2013> select the Autoprobe Directives and click the Apply button. If every steps doen you need to reboot your managed JAVA system.
    Now you are ready to use the RCA tools and also see data in the IS Enterprise Manager.

  • Is Wily Introscope a requirement with Solman 7 ehp1

    We are finishing and upgrade from 3.2 to 7 EHP1.
    Due to limited system capacity we have not installed the Wily Introscope product.  At this time we were not planning on using its functionality.  We are wanting to keep the basic functionality of solman 3.2 plus add the MOPZ piece.
    I'm using the solman_setup tcode to go through the basic config wizard now.  I've reached the Landscape Data step where it is asking for the Wily Introscope info.  Since it doen't exist, can I bypass this step?
    Thanks for your advice.
    Laurie McGinley

    Thanks Jarad,
    That is what I thought (it isn't required), but needed to double check before I bypassed that bit of the setup.
    Appreciate the quick response too!
    Laurie

  • Error while installing Wily Introscope

    Hi All,
    I have installed introscope enterprise manager 8 in solution manager 7.0 (SP15). i have follwed the below steps:
    1. Installation and Setup of SAP Solution Manager Server:
                   upgrading SAP Solution Manager Diagnostics (SMD) package
                   running Diagnostic setup wizard
    everything went successful.
    in the next step of wily introscope installation i have followed the below steps:
    2. installing CA Wily Introscope
               I.   Download Third-Party External Component Package from CA Wily
               II.   elected Platform Independent Introscope Installer
               III.  Extracted the Introscope Installer
              IV. Added the External Component Package
              V. Started the Installer
              VI. Verified the Installation
              VII.Installed the SAP Management Modules
             VIII.Ran the Enterprise Manager from OS level (AIX)
              IX. Checked That Introscope Is Running Properly
              X.  Extracted the Introscope Agent
              XI.  Created an AutoProbe Connector
             XII.  Activated the Agent: Setting up Java VM Parameters -
    here I am facing the issue
    in the installation manual it has been given to add the below java parameters to server node:
    -Xbootclasspath/p:/usr/sap/ccms/wily/connectors/connector.jar:/usr/sap/ccms/wily/Agent.jar
    -Dcom.wily.introscope.agentProfile=/usr/sap/ccms/wily/IntroscopeAgent.profile
    -Dcom.wily.introscope.agent.agentName=<AgentName>
    i have added the above parameters and resterted the server then the java engine is not coming up. conflicting with the first parameter. once I remove that parameter I am able to up the java engine.
    without being added the above parameters " the agent will not start".
    please help me in this.
    thanks in advance
    Mohan K

    Mohan,
    I have the same problem. That is I set up the SMD on the managed system and completed the Managed system configuration through Solman which Installed Wily Introscope. With Wily enabled , the Java server process does not start.
    If I delete the 3 lines that have wily in it, it starts OK.
    How did you resolve this problem. Please let me know in detail.
    Thank you.
    Ravi

  • Wily Introscope is not running in Solution Manager 7.1 and tech monitoring

    Hi Experts,
    we are able to log in wily introscope, But metrics(values) are not coming in wily
    we re started the solution manager server, that port is working fine now, Please assist me on this to fix issue find log as attachment.
    2)we configure the technical monitoring in our solution manager system but metrics are not coming for dialog response time in dash board. which extractor i need to check how to troubleshoot,
    thanks in advance for you help
    Best Reg

    Hi Srivastav.
    Actually i am new to solution manager, and we have done basic steps of solution manager like
    system preparation,basic configuration,managed system configuration and technical monitoring,
    in tech monitoring system monitoring,and EUEM and we are planing to perform DVM and RBPD,
    my solution manager system is installed on windows 2008 server, version is 7.1 SP 7,
    currently we facing issue in wily introscope and technical monitoring dash boards metrics are not appearing and please tell me how to close the thread ,
    Best Regards,
    Hanuman

  • Wily Introscope is not running in Solution Manager 7.1

    Hello Experts,
    wily Introscope is not running in solution manager system,
    below error getting in log, solution manager is running on windows server and how to start wily in windows.
    8/23/14 11:58:50.088 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
    8/23/14 11:58:50.090 AM IST [INFO] [WrapperSimpleAppMain] [Manager]
    ****** CA Wily Introscope License ******
      type = em-sap
      rev = 30
      cid = sap-ags
      organization = SAP Active Global Support
      reg-id = sap-end-user
      email = none
      sum = 27618b562bc2239e3cf71d9542c76df4
    8/23/14 11:58:50.091 AM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
    8/23/14 11:58:50.113 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
    8/23/14 11:58:52.343 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
    8/23/14 11:58:52.343 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
    8/23/14 11:58:52.412 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
    8/23/14 11:58:52.628 AM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
    8/23/14 11:58:52.645 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
    8/23/14 11:58:52.655 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
    8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
    8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
    8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
    8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
    8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
    8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
    8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
    8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager]
    ****** CA Wily Introscope License ******
      type = em-sap
      rev = 30
      cid = sap-ags
      organization = SAP Active Global Support
      reg-id = sap-end-user
      email = none
      sum = 27618b562bc2239e3cf71d9542c76df4
    8/23/14 12:02:31.586 PM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
    8/23/14 12:02:31.602 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
    8/23/14 12:02:31.958 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
    8/23/14 12:02:31.959 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
    8/23/14 12:02:32.030 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
    8/23/14 12:02:32.287 PM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
    8/23/14 12:02:32.306 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
    8/23/14 12:02:32.321 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
    8/23/14 12:37:05.225 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
    8/23/14 12:37:05.227 PM IST [INFO] [WrapperSimpleAppMain] [Manager]
    ****** CA Wily Introscope License ******
      type = em-sap
      rev = 30
      cid = sap-ags
      organization = SAP Active Global Support
      reg-id = sap-end-user
      email = none
      sum = 27618b562bc2239e3cf71d9542c76df4
    8/23/14 12:37:05.228 PM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
    8/23/14 12:37:05.249 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
    8/23/14 12:37:05.644 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
    8/23/14 12:37:05.644 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
    8/23/14 12:37:05.728 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
    8/23/14 12:37:05.994 PM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
    8/23/14 12:37:06.014 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
    8/23/14 12:37:06.028 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
    Please assist me on this
    Best Regards
    Hanuman

    Hello Srivastav,
    i am getting below problem in wily introscope log
    9/01/14 11:22:02.675 AM IST [ERROR] [WrapperSimpleAppMain] [Manager.Acceptor] Failed to bind to server socket
    java.net.BindException: Address already in use: bind
      at sun.nio.ch.Net.bind(Native Method)
      at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:126)
      at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:59)
      at com.wily.isengard.postofficehub.link.server.Acceptor.<init>(Acceptor.java:72)
      at com.wily.isengard.postofficehub.link.server.ConnectionListenerFactory.create(ConnectionListenerFactory.java:31)
      at com.wily.isengard.postoffice.server.PostOfficeHubServer.startIncomingConnectionListener(PostOfficeHubServer.java:261)
      at com.wily.isengard.postoffice.server.PostOfficeHubServer.startAllIncomingConnectionListeners(PostOfficeHubServer.java:235)
      at com.wily.isengard.postoffice.server.PostOfficeHubServer.acceptIncomingHubConnections(PostOfficeHubServer.java:103)
      at com.wily.isengard.api.server.IsengardControllerServer.acceptIncomingConnections(IsengardControllerServer.java:207)
      at com.wily.isengard.api.samplemain.SampleMain.acceptIncomingConnections(SampleMain.java:117)
      at com.wily.introscope.server.enterprise.EnterpriseServer.initialize(EnterpriseServer.java:708)
      at com.wily.introscope.server.enterprise.EnterpriseServer.doStart(EnterpriseServer.java:358)
      at com.wily.util.ALifeCycle.start(ALifeCycle.java:86)
      at com.wily.introscope.server.enterprise.EnterpriseServer.<init>(EnterpriseServer.java:301)
      at com.wily.introscope.server.enterprise.EnterpriseServer.<init>(EnterpriseServer.java:280)
      at com.wily.introscope.server.enterprise.EnterpriseServer.start(EnterpriseServer.java:1444)
      at com.wily.introscope.em.internal.Activator.startEM(Activator.java:116)
      at com.wily.introscope.em.internal.Application.start(Application.java:27)
      at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:193)
      at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
      at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
      at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
      at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
      at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
      at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
      at org.eclipse.equinox.launcher.Main.main(Main.java:1212)
      at org.eclipse.core.launcher.Main.main(Main.java:30)
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      at org.tanukisoftware.wrapper.WrapperSimpleApp.run(WrapperSimpleApp.java:244)
      at java.lang.Thread.run(Thread.java:662)
    9/01/14 11:22:02.679 AM IST [INFO] [WrapperSimpleAppMain] [Manager.PostOfficeHub] Server listening for incoming default socket connections on port 6001
    9/01/14 11:22:02.682 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Connection Initiator listening...
    9/01/14 11:22:02.684 AM IST [INFO] [WrapperSimpleAppMain] [Manager.MMHotDeployEntity] Will monitor D:\usr\sap\CCMS\apmintroscope\deploy for new files every 60 seconds
    9/01/14 11:22:02.685 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager started with management module warnings.
    9/01/14 11:22:42.883 AM IST [INFO] [PO:main Mailman 1] [Manager.LoadBalancer] Loaded loadbalancing.xml
    9/01/14 11:23:31.817 AM IST [INFO] [btpool0-1] [Manager] User "Admin" logged in successfully from host "localhost"
    9/01/14 11:23:31.825 AM IST [INFO] [btpool0-1] [Manager] request.getContextPath() /webview
    9/01/14 11:23:31.826 AM IST [INFO] [btpool0-1] [Manager] Login event Admin 1667ryb11leum 10.1.0.133 true
    9/01/14 11:51:30.061 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409164200000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.063 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409077800000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.064 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409423400000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.066 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409337000000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.067 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409250600000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.088 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1406831400000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.089 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1408991400000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.090 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1408905000000.data seems to be OK - not sure what to do with append inputs
    Please help me to sort this issue,
    Best Regards,
    Hanuman Chinthalwar

  • Wily Introscope 8.2.2 - No License for Wrapper service

    Hi All,
    I've installed the Wily Introscope Manager 8.2.2. When starting the EM service, I get the following error message in the log file:
    STATUS | wrapper  | 2010/09/20 15:10:47 | --> Wrapper Started as Service
    STATUS | wrapper  | 2010/09/20 15:10:47 | Java Service Wrapper Standard Edition 32-bit 3.3.6
    STATUS | wrapper  | 2010/09/20 15:10:47 |   Copyright (C) 1999-2009 Tanuki Software, Ltd.  All Rights Reserved.
    STATUS | wrapper  | 2010/09/20 15:10:47 |     http://wrapper.tanukisoftware.org
    STATUS | wrapper  | 2010/09/20 15:10:47 |
    ERROR  | wrapper  | 2010/09/20 15:10:47 | License Error:
    ERROR  | wrapper  | 2010/09/20 15:10:47 | A valid license was not found in the Wrapper configuration file.
    ERROR  | wrapper  | 2010/09/20 15:10:47 |
    ERROR  | wrapper  | 2010/09/20 15:10:47 | A license can be obtained from the Java Service Wrapper site:
    ERROR  | wrapper  | 2010/09/20 15:10:47 |   http://wrapper.tanukisoftware.org/doc/english/purchase.html
    I believe that Wily is licensed as part of the Solution Manager Enterprise edition. So why do I need to buy an additional license?
    Regards,
    Masoud

    Hi 
    For the Wily Introscope Enterprise Manager 8.2 the error you described
    occurs if the em-include.conf file is missing in the EM' installation.
    This file is included into the SAP managed modules SAPISMM02_0*.SAR
    file.
    Note that for Wily Introscope EM 8.2.2 you need to install the SAP
    management modules after the installation of the EM 8.2.2 AND before
    you attempt to start the service
    Please refer to the Node 797147 for the documentation about the
    the SAPISMM02_0*.SAR - management modules to be installed on top of
    Enterprise Manager.
    Please consider additionally the Note 1273028
    - The Enterprise Manager can only be launched as Windows Service
    after the latest management module package (SAPISMM) has been
    installed. The SAPISMM package contains a file em-include.conf
    which is required.
    I would like to ask you to implement the Note 1273028 and to retest the
    issue.
    Best Regards
    Jai Wardhan

  • Reorganization of wily Introscope data on file system level

    Hello.
    The central repository for Wily Introscope performance data is supposed to be on /usr/sap/ccms, on Solution Manager server.
    Does anyone knows if there is a procedure to avoid this file system to grow too much? or if there are any estimation about the size this directory could reach?
    Kind regards,
    Fermín Álvarez

    Hi,
    I am also facing the same issue while starting Introscope Entraprise Manager. i.e " port already in use:8081 change the property introscope.entraprisemanger.webserver.port "
    If I check the for Introscope service
    bash-3.00# ps -ef | grep Intro
      sm1adm 12666 12662   0 11:52:07 ?           0:00 /usr/dt/bin/dthelpview -helpVolume Intromgr
        root 12817 10056   0 12:04:21 pts/1       0:00 grep Intro
    And following is the output for port 8081
    bash-3.00# netstat -a | grep 8081
          *.8081               .                0      0 49152      0 LISTEN
    Please tell me how to rectify the issue..
    Thanks & Regards
    Amair

  • Wily Introscope for SOLMAN 7.1

    Hi All,
    We are configuring SAP Solution Manager 7.1
    I have few doubts regarding Wily Introscope.
    1. Is it necessary to install Wily Introscope on SAP SOLMAN 7.1?
    2. Is it installed already with SOLMAN or need to be installed manually?
    3. I need details about licensing policy of Wily Introscope.
    4. If it is necessary to install please provide suitable link for installing it.
    and I have one more question.
    We getting waring message for Single Sign On and WEB Services Logical Port Creation in Managed System Configuration Step No. 8 Configure Automatically.
    Shall we proceed with warning. or it needs to be fully performed without warning.
    Please guide us.
    Thanks & Regards,
    Ishan

    Ishan trying to answer all your doubts:
    1. Is it necessary to install Wily Introscope on SAP SOLMAN 7.1?
    If you need to implement RCA then only Wily Introscope is required.
    2. Is it installed already with SOLMAN or need to be installed manually?
    It has to be installed manually..Just follow the standard guide..
    3. I need details about licensing policy of Wily Introscope.
    Good Question..I think there should be someone in your orgnisation who looks after the licencing..Ask him to give  a call to SAP..
    4. If it is necessary to install please provide suitable link for installing it.
    Follow this link :
    http://www.scribd.com/doc/36673011/Wily-Intro-Scope-8-Installation-Guide
    Thanks & Regards,
    Joydeep

  • How to add managed system in Wily introscope system

    Hi All,
    Can anyone provide the document on how to add managed system in Wily Introscope?
    With Regards
    Ashutosh

    Hello,
    The documentation for WilyIntroscope is located at
    http://service.sap.com/diagnostics
    > Media Library
    Here you can find user guides and installation guides for WilyIntroscope.
    But the overview is you install Enterprise Manager on a server that becomes the EM Server and then IS Agents on the managed system. There is an installation guide for EM and this ISAGENT setup is part of managed system setup in Solman_setup.
    Your tools to manage are Webview and Workstation, and there is documentation for these at the above mentioned link as well.
    Regards,
    Paul

Maybe you are looking for

  • Flash 2.0 Datagrid component bug ?

    Recently I found a bug in Datagrid component. The swf file which contain datagrid act differely in IE 6, and IE 7. This is what I've done: 1) Compile swf, export it together with html file. 2) Run the html file 3)Press on one of the cell,drag it and

  • Can't open saved file in Outlook

    Hi, all, I save the incoming emails using JavaMail API. The files are successfully created, their content is readable(html-like). However they cannot be opened with Outlook. The following error occurs: "Cannot open file: D:\temp\message.msg. the file

  • "there were not enough threads in the threadpool object to complete the operation" exception

    Post Author: crystalmatrix CA Forum: .NET I have a WinForm application using a Crystal Report Viewer control that in turn connects to a CR web service to display report. The client side application runs on WinXP SP1 with .Net framework 1.1, and the s

  • Put  list on session snd display on jsp

    hi I have some like List<hallA> allFound = new ArrayList<hallA>(); while(rs.next()){                           hallA myselect= new hallA();                        myselect.setName(rs.getString("name"));                        myselect.setGender(rs.ge

  • Height changed for automatic height iviews after upgrade

    Hi All, We have a strange issue. We upgraded recently from EP6 SP20 to EP7 SP16. After this, all the KM iviews which had the height type set as Automatic has the minimum height 150px, not in the iview settings, but in the actual display. In the setti