Wily Introscope prerequisite
Hello,
We want to implement Wily introscope in our landscape . We have 1 Solman and 6 systems to be monitored.
I had the following queries.
1. What are the prerequiste of the wily introscope.
2. Do we need SMD implemented on the systems to install wily.
3. If SMD is required pls let me know the prerequisite of SMD.
I have already gone through CA Wily 8.0 installation guide on SMP. I was not able to find the prerequisite.
Looking forward for your guidance.
Cheers!
Sammy
Hi
1. Refer http://www.sap2048.com/wily-introscope-installation-for-sap-customers-17.htm
2. Yes, preferred.
3. You may need to patch the SMD agent for wily8.0. As for the SMD agent itself, there is no requirement other that 1GB of space. It is available in all standard SAPINST.
Cheer!!
Javed
Similar Messages
-
Problem Wily Introscope Installation!
Hi,
I can not install on the server of the Solution Manager Wily Introscope ENTPR MGR 8 -> AIX 64bit 5.3 - java version "1.4.2"
Java (TM) 2 Runtime Environment, Standard Edition (build 1.4.2)
Classic VM (build 1.4.2, J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142-20061124 (SR7) (JIT enabled: jitc)
Used files are:
SAPISEM8SP01_00-10007374.SAR
osgiPackages.v1.1.unix.tar
eula.txt
Can you help?
Best Regards.Hi,
I installed the EM as explained Inst.Guide_Introscope Ver.8 for SAP
using the files:
SAPISEM8SP01_00-10007374.SAR (introscope8.1.0.0aix64SAP.bin)
SAPISMM8SP01_00-10007429.SAR (management modules)
Then I deploy with SDM the ISAGENTSMD801_01-10007435.SCA.
Then I launched SOLMAN_SETUP:
Initial Configuration -> ok (green)
Basic Configuration -> ok (green)
Managed System Configuration select the stack of hava Solman and click on "Configure System", Diagnostics Prerequisites are ok.
In step 2 "Manual Configuration":
-Install Diagnostics Agent (it was previously done by SDM)
-Assign Diagnostc Agent -> Open URL -> Agent Administrator
The problem arises at this point if you click on "Show offline agents" list is empty!
Then I also tried to install the Wily Introscope Agent at hand but might as well not start.
Can you help?
My Solution Manager has been upgraded to 'EHP1 on AIX 5L with JVM:
Java VM version: J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142-20090307 (SR13) (JIT enabled: jitc)
Java VM vendor: Classic VM (IBM Corporation)
java vm type: <default>
java vm cpu: ppc64
Regards.
Diego. -
Wily Introscope Agent does not start
Hi,
i am installing Solution Manager Diagnostics on a Solution Manger 7.0 System. At the moment i am on the point to install the Wily Introscop Agent and i have following problem:
At first i tried the automatic setup and deployed the agent with JSPM and it seemed to work. I see "ISAGENT" on the System Information -> All Compontents over http://0/smd/admin and there is no log directory in the wily directory?
Does anybody has an idea whats wrong?
Best Regards,
Stefan
Edited by: Stefan on Feb 17, 2009 8:57 AM
Edited by: Stefan on Feb 17, 2009 9:31 AMHello Stephan,
1. Wily IS Agent (2 agents) is installed ONLY in SOLMAN system.
2. Then, with SOLMAN_SETUP Guided procedure, in third phase (Managed System Configuration),
you deploy the Wily IS Agent to your managed system.
To summarize :
1. Install the ISAGENTxxx.SCA in SOLMAN only !
2. Start the SOLMAN_SETUP guided procedure
3. Phase I - Initial Configuration
Phase II - Basis Configuration
Phase III - Managed System Configuration.
In Phase III, there are 6 steps :
1. Connect Managed system
2. Check Prerequisites
3. Manual Configuration
4. Diagnostics Configuration
5. Wily Introscope Configuration
6. Create Logical Components
The Wily IS Agent (2 agents : IS Agent wich monitored JAVA instance and Wily Host-level Agent which a sub-process of the SMD Agent) is configured and STARTED here.
So, you cannot start / stop by any OS command the Wily IS Agent.
You start it from SMD.
Hope it help you.
Best regards
Pascal Cuennet -
Error while installing Wily Introscope
Hi All,
I have installed introscope enterprise manager 8 in solution manager 7.0 (SP15). i have follwed the below steps:
1. Installation and Setup of SAP Solution Manager Server:
upgrading SAP Solution Manager Diagnostics (SMD) package
running Diagnostic setup wizard
everything went successful.
in the next step of wily introscope installation i have followed the below steps:
2. installing CA Wily Introscope
I. Download Third-Party External Component Package from CA Wily
II. elected Platform Independent Introscope Installer
III. Extracted the Introscope Installer
IV. Added the External Component Package
V. Started the Installer
VI. Verified the Installation
VII.Installed the SAP Management Modules
VIII.Ran the Enterprise Manager from OS level (AIX)
IX. Checked That Introscope Is Running Properly
X. Extracted the Introscope Agent
XI. Created an AutoProbe Connector
XII. Activated the Agent: Setting up Java VM Parameters -
here I am facing the issue
in the installation manual it has been given to add the below java parameters to server node:
-Xbootclasspath/p:/usr/sap/ccms/wily/connectors/connector.jar:/usr/sap/ccms/wily/Agent.jar
-Dcom.wily.introscope.agentProfile=/usr/sap/ccms/wily/IntroscopeAgent.profile
-Dcom.wily.introscope.agent.agentName=<AgentName>
i have added the above parameters and resterted the server then the java engine is not coming up. conflicting with the first parameter. once I remove that parameter I am able to up the java engine.
without being added the above parameters " the agent will not start".
please help me in this.
thanks in advance
Mohan KMohan,
I have the same problem. That is I set up the SMD on the managed system and completed the Managed system configuration through Solman which Installed Wily Introscope. With Wily enabled , the Java server process does not start.
If I delete the 3 lines that have wily in it, it starts OK.
How did you resolve this problem. Please let me know in detail.
Thank you.
Ravi -
Wily Introscope is not running in Solution Manager 7.1 and tech monitoring
Hi Experts,
we are able to log in wily introscope, But metrics(values) are not coming in wily
we re started the solution manager server, that port is working fine now, Please assist me on this to fix issue find log as attachment.
2)we configure the technical monitoring in our solution manager system but metrics are not coming for dialog response time in dash board. which extractor i need to check how to troubleshoot,
thanks in advance for you help
Best RegHi Srivastav.
Actually i am new to solution manager, and we have done basic steps of solution manager like
system preparation,basic configuration,managed system configuration and technical monitoring,
in tech monitoring system monitoring,and EUEM and we are planing to perform DVM and RBPD,
my solution manager system is installed on windows 2008 server, version is 7.1 SP 7,
currently we facing issue in wily introscope and technical monitoring dash boards metrics are not appearing and please tell me how to close the thread ,
Best Regards,
Hanuman -
Wily Introscope is not running in Solution Manager 7.1
Hello Experts,
wily Introscope is not running in solution manager system,
below error getting in log, solution manager is running on windows server and how to start wily in windows.
8/23/14 11:58:50.088 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
8/23/14 11:58:50.090 AM IST [INFO] [WrapperSimpleAppMain] [Manager]
****** CA Wily Introscope License ******
type = em-sap
rev = 30
cid = sap-ags
organization = SAP Active Global Support
reg-id = sap-end-user
email = none
sum = 27618b562bc2239e3cf71d9542c76df4
8/23/14 11:58:50.091 AM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
8/23/14 11:58:50.113 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
8/23/14 11:58:52.343 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
8/23/14 11:58:52.343 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
8/23/14 11:58:52.412 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
8/23/14 11:58:52.628 AM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
8/23/14 11:58:52.645 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
8/23/14 11:58:52.655 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager]
****** CA Wily Introscope License ******
type = em-sap
rev = 30
cid = sap-ags
organization = SAP Active Global Support
reg-id = sap-end-user
email = none
sum = 27618b562bc2239e3cf71d9542c76df4
8/23/14 12:02:31.586 PM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
8/23/14 12:02:31.602 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
8/23/14 12:02:31.958 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
8/23/14 12:02:31.959 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
8/23/14 12:02:32.030 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
8/23/14 12:02:32.287 PM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
8/23/14 12:02:32.306 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
8/23/14 12:02:32.321 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
8/23/14 12:37:05.225 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
8/23/14 12:37:05.227 PM IST [INFO] [WrapperSimpleAppMain] [Manager]
****** CA Wily Introscope License ******
type = em-sap
rev = 30
cid = sap-ags
organization = SAP Active Global Support
reg-id = sap-end-user
email = none
sum = 27618b562bc2239e3cf71d9542c76df4
8/23/14 12:37:05.228 PM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
8/23/14 12:37:05.249 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
8/23/14 12:37:05.644 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
8/23/14 12:37:05.644 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
8/23/14 12:37:05.728 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
8/23/14 12:37:05.994 PM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
8/23/14 12:37:06.014 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
8/23/14 12:37:06.028 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
Please assist me on this
Best Regards
HanumanHello Srivastav,
i am getting below problem in wily introscope log
9/01/14 11:22:02.675 AM IST [ERROR] [WrapperSimpleAppMain] [Manager.Acceptor] Failed to bind to server socket
java.net.BindException: Address already in use: bind
at sun.nio.ch.Net.bind(Native Method)
at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:126)
at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:59)
at com.wily.isengard.postofficehub.link.server.Acceptor.<init>(Acceptor.java:72)
at com.wily.isengard.postofficehub.link.server.ConnectionListenerFactory.create(ConnectionListenerFactory.java:31)
at com.wily.isengard.postoffice.server.PostOfficeHubServer.startIncomingConnectionListener(PostOfficeHubServer.java:261)
at com.wily.isengard.postoffice.server.PostOfficeHubServer.startAllIncomingConnectionListeners(PostOfficeHubServer.java:235)
at com.wily.isengard.postoffice.server.PostOfficeHubServer.acceptIncomingHubConnections(PostOfficeHubServer.java:103)
at com.wily.isengard.api.server.IsengardControllerServer.acceptIncomingConnections(IsengardControllerServer.java:207)
at com.wily.isengard.api.samplemain.SampleMain.acceptIncomingConnections(SampleMain.java:117)
at com.wily.introscope.server.enterprise.EnterpriseServer.initialize(EnterpriseServer.java:708)
at com.wily.introscope.server.enterprise.EnterpriseServer.doStart(EnterpriseServer.java:358)
at com.wily.util.ALifeCycle.start(ALifeCycle.java:86)
at com.wily.introscope.server.enterprise.EnterpriseServer.<init>(EnterpriseServer.java:301)
at com.wily.introscope.server.enterprise.EnterpriseServer.<init>(EnterpriseServer.java:280)
at com.wily.introscope.server.enterprise.EnterpriseServer.start(EnterpriseServer.java:1444)
at com.wily.introscope.em.internal.Activator.startEM(Activator.java:116)
at com.wily.introscope.em.internal.Application.start(Application.java:27)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:193)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
at org.eclipse.equinox.launcher.Main.main(Main.java:1212)
at org.eclipse.core.launcher.Main.main(Main.java:30)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.tanukisoftware.wrapper.WrapperSimpleApp.run(WrapperSimpleApp.java:244)
at java.lang.Thread.run(Thread.java:662)
9/01/14 11:22:02.679 AM IST [INFO] [WrapperSimpleAppMain] [Manager.PostOfficeHub] Server listening for incoming default socket connections on port 6001
9/01/14 11:22:02.682 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Connection Initiator listening...
9/01/14 11:22:02.684 AM IST [INFO] [WrapperSimpleAppMain] [Manager.MMHotDeployEntity] Will monitor D:\usr\sap\CCMS\apmintroscope\deploy for new files every 60 seconds
9/01/14 11:22:02.685 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager started with management module warnings.
9/01/14 11:22:42.883 AM IST [INFO] [PO:main Mailman 1] [Manager.LoadBalancer] Loaded loadbalancing.xml
9/01/14 11:23:31.817 AM IST [INFO] [btpool0-1] [Manager] User "Admin" logged in successfully from host "localhost"
9/01/14 11:23:31.825 AM IST [INFO] [btpool0-1] [Manager] request.getContextPath() /webview
9/01/14 11:23:31.826 AM IST [INFO] [btpool0-1] [Manager] Login event Admin 1667ryb11leum 10.1.0.133 true
9/01/14 11:51:30.061 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409164200000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.063 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409077800000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.064 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409423400000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.066 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409337000000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.067 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409250600000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.088 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1406831400000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.089 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1408991400000.data seems to be OK - not sure what to do with append inputs
9/01/14 11:51:30.090 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1408905000000.data seems to be OK - not sure what to do with append inputs
Please help me to sort this issue,
Best Regards,
Hanuman Chinthalwar -
Wily Introscope 8.2.2 - No License for Wrapper service
Hi All,
I've installed the Wily Introscope Manager 8.2.2. When starting the EM service, I get the following error message in the log file:
STATUS | wrapper | 2010/09/20 15:10:47 | --> Wrapper Started as Service
STATUS | wrapper | 2010/09/20 15:10:47 | Java Service Wrapper Standard Edition 32-bit 3.3.6
STATUS | wrapper | 2010/09/20 15:10:47 | Copyright (C) 1999-2009 Tanuki Software, Ltd. All Rights Reserved.
STATUS | wrapper | 2010/09/20 15:10:47 | http://wrapper.tanukisoftware.org
STATUS | wrapper | 2010/09/20 15:10:47 |
ERROR | wrapper | 2010/09/20 15:10:47 | License Error:
ERROR | wrapper | 2010/09/20 15:10:47 | A valid license was not found in the Wrapper configuration file.
ERROR | wrapper | 2010/09/20 15:10:47 |
ERROR | wrapper | 2010/09/20 15:10:47 | A license can be obtained from the Java Service Wrapper site:
ERROR | wrapper | 2010/09/20 15:10:47 | http://wrapper.tanukisoftware.org/doc/english/purchase.html
I believe that Wily is licensed as part of the Solution Manager Enterprise edition. So why do I need to buy an additional license?
Regards,
MasoudHi
For the Wily Introscope Enterprise Manager 8.2 the error you described
occurs if the em-include.conf file is missing in the EM' installation.
This file is included into the SAP managed modules SAPISMM02_0*.SAR
file.
Note that for Wily Introscope EM 8.2.2 you need to install the SAP
management modules after the installation of the EM 8.2.2 AND before
you attempt to start the service
Please refer to the Node 797147 for the documentation about the
the SAPISMM02_0*.SAR - management modules to be installed on top of
Enterprise Manager.
Please consider additionally the Note 1273028
- The Enterprise Manager can only be launched as Windows Service
after the latest management module package (SAPISMM) has been
installed. The SAPISMM package contains a file em-include.conf
which is required.
I would like to ask you to implement the Note 1273028 and to retest the
issue.
Best Regards
Jai Wardhan -
Extend Wily Introscope in Solution Manager
Hello, Could I monitor other non SAP solutions in Solution Manager?
I need to integrate all systems that are intended for monitoring (SAP
and non SAP systems) to Solution Manager
What is the scope of Wily Introscope in Solution Manager? Is the scope
only with SAP products or I could extend Introscope's capabilities to
other products?
Thanks for your help
Best regards
Edgar Rafael Escobar MolinaWhat is the scope of Wily Introscope in Solution Manager? Is the scope
only with SAP products or I could extend Introscope's capabilities to
other products?
The Introscope coming with SolMan is only a part of the full Introscope suite. It contains only those applications necessary to monitor SAP systems. For other non-SAP systems you would need different agents which are not delivered and must be purchased separately. I´m also not sure if the Solman license permits the usage of those agents in non-SAP environments.
Markus -
Wily introscope issue after System refresh in solman 7.1 Sp11
Hello experts,
Unable to remove old Production wily in quality system.
An new wily has installed in development box but when i run Solman_setup -> basis configuration ->cofig wily
Unable to unassign or delete old wily introscope
Thanks ,
Rahul YedapallyHi Rahul,
Check in expert mode , diagnostic agent of development system should appear in quality SMD agent administration as you are assigning DEV wily to SOLMAN QUA.
and all so make sure RFCs WEBADMIN , SOLMANDIAG and
NONE are working fine in SOLMAN.
Thanks,
Prakash Reddy Maram -
Wily Introscope Enterprise Manager fails to start due to Java Heap
Hello All,
I just installed Wily Introscope for the first time. I have successfully installed it from the log below:
Summary
Installation: Successfulwith errors.
396 Successes
0 Warnings
1 NonFatalErrors
0 FatalErrors
I also confirm that the Introscope Enterprise Manager is started as a service.
However, when i try to launch enterprise by following the path All Programs > CA Wily > Introscope 8.2.3.5 > Introscope Enterprise Manager....
I get the error below:
3/29/11 07:11:46 PM PDT [ERROR] [Manager.Bootstrap] Load all Management Modules FAILED.
3/29/11 07:11:46 PM PDT [ERROR] [Manager] The EM failed to start. Java heap space
I have also adapted my Java Heap from 512 to 1024 in EMService.conf file but I still get same error. This was the recommendation in this related forum post - Wily Introscope - EM failed to start
Please help!!!!Hello,
Like I said, I have increased the value to 1024MB and still not starting.
The corresponding section of the EMService is pasted below:
Wrapper Properties
Java Application
wrapper.java.command=jre
bin
java.exe
wrapper.working.dir=.\
Java Main class
wrapper.java.mainclass=org.tanukisoftware.wrapper.WrapperSimpleApp
Java Classpath (include wrapper.jar) Add class path elements as
needed starting from 1
wrapper.native_library=ServiceWrapper32
wrapper.java.classpath.1=./lib/ServiceWrapper32.jar
wrapper.java.classpath.2=./launcher.jar
#wrapper.java.classpath.3=
Java Library Path (location of Wrapper.DLL or libwrapper.so)
wrapper.java.library.path.1=./lib
Java Additional Parameters
Note: On 64-bit Windows only, the first additional parameter must be: -Xrs
#wrapper.java.additional.1=
wrapper.java.additional.1=-Xrs
wrapper.java.additional.2=-Djava.awt.headless=false
Initial Java Heap Size (in MB)
wrapper.java.initmemory=512
Maximum Java Heap Size (in MB)
wrapper.java.maxmemory=1024
Application parameters. Add parameters as needed starting from 1
wrapper.app.parameter.1=org.eclipse.core.launcher.Main
wrapper.app.parameter.2=-consolelog
wrapper.app.parameter.3=-noExit
wrapper.app.parameter.4=-product
wrapper.app.parameter.5=com.wily.introscope.em.product
wrapper.app.parameter.6=-install
wrapper.app.parameter.7=./product/enterprisemanager
wrapper.app.parameter.8=-configuration
wrapper.app.parameter.9=./product/enterprisemanager/configuration
Number of seconds to allow between the time that the Wrapper launches
the JVM process and the time that the JVM side of the Wrapper responds
that the application has started. 0 means never time out. Defaults to 30 seconds.
wrapper.startup.timeout=300
Please help -
Reorganization of wily Introscope data on file system level
Hello.
The central repository for Wily Introscope performance data is supposed to be on /usr/sap/ccms, on Solution Manager server.
Does anyone knows if there is a procedure to avoid this file system to grow too much? or if there are any estimation about the size this directory could reach?
Kind regards,
Fermín ÁlvarezHi,
I am also facing the same issue while starting Introscope Entraprise Manager. i.e " port already in use:8081 change the property introscope.entraprisemanger.webserver.port "
If I check the for Introscope service
bash-3.00# ps -ef | grep Intro
sm1adm 12666 12662 0 11:52:07 ? 0:00 /usr/dt/bin/dthelpview -helpVolume Intromgr
root 12817 10056 0 12:04:21 pts/1 0:00 grep Intro
And following is the output for port 8081
bash-3.00# netstat -a | grep 8081
*.8081 . 0 0 49152 0 LISTEN
Please tell me how to rectify the issue..
Thanks & Regards
Amair -
Wily Introscope for SOLMAN 7.1
Hi All,
We are configuring SAP Solution Manager 7.1
I have few doubts regarding Wily Introscope.
1. Is it necessary to install Wily Introscope on SAP SOLMAN 7.1?
2. Is it installed already with SOLMAN or need to be installed manually?
3. I need details about licensing policy of Wily Introscope.
4. If it is necessary to install please provide suitable link for installing it.
and I have one more question.
We getting waring message for Single Sign On and WEB Services Logical Port Creation in Managed System Configuration Step No. 8 Configure Automatically.
Shall we proceed with warning. or it needs to be fully performed without warning.
Please guide us.
Thanks & Regards,
IshanIshan trying to answer all your doubts:
1. Is it necessary to install Wily Introscope on SAP SOLMAN 7.1?
If you need to implement RCA then only Wily Introscope is required.
2. Is it installed already with SOLMAN or need to be installed manually?
It has to be installed manually..Just follow the standard guide..
3. I need details about licensing policy of Wily Introscope.
Good Question..I think there should be someone in your orgnisation who looks after the licencing..Ask him to give a call to SAP..
4. If it is necessary to install please provide suitable link for installing it.
Follow this link :
http://www.scribd.com/doc/36673011/Wily-Intro-Scope-8-Installation-Guide
Thanks & Regards,
Joydeep -
How to add managed system in Wily introscope system
Hi All,
Can anyone provide the document on how to add managed system in Wily Introscope?
With Regards
AshutoshHello,
The documentation for WilyIntroscope is located at
http://service.sap.com/diagnostics
> Media Library
Here you can find user guides and installation guides for WilyIntroscope.
But the overview is you install Enterprise Manager on a server that becomes the EM Server and then IS Agents on the managed system. There is an installation guide for EM and this ISAGENT setup is part of managed system setup in Solman_setup.
Your tools to manage are Webview and Workstation, and there is documentation for these at the above mentioned link as well.
Regards,
Paul -
Error while installing wily introscope 9.1.5.0
Dear Gurus,
While i tried to install the wily introscope 9.1.5.0, it ends with below error. please guide me to install.
Invalid External Component Package Specified
The specified package, /oracle/stage1/willy/osgiPackages.v9.1.5.0.unix.tar, is not the expected version. This Introscope installer expects version 9.1.5.0 of the external components package.
Edit the responsefile so that the externalComponentPackage property refers to version 9.1.5.0 of the external components package, then rerun the silent installer.
BalajiHi Divyanshu,
i copied the downloaded files in that stage directory and install it.
i used 797147 - Introscope Installation for SAP Customers for downloading the required setup files and for externel package is used Index of /ips/osgi/introscope_9.1.5.0
Balaji -
Wily Introscope Installation Issue
I've been trying to install the Wily Introscope Enterprise Manager onto my Solution Manager server for several days now but I'm running into a lot of issues. I have unpacked SAPISEM8SP01_00-10007429.SAR & SAPISEM80_03-10007433.SAR but the silent installation is not providing any errors or information on the installation. I've tried just about everything to get introscope8.0.2.0windowsAMD64SAP.exe to run on my server but it still does nothing. Has anyone run into this issue?
was able to finally get the installer to work by using package
SAPISEM8SP01_00-10007433.SAR. Not sure why the others were not working
but the agent works fine now.
Maybe you are looking for
-
XML File to SAP R/3 using SAP XI
Hello Everyone, I'm hoping someone has done this scenario and can provide a step by step example for me. The scenario I have is as follows: -- An XML file is placed manually on a UNIX SAP Server -- SAP XI should, once the file is placed on the serve
-
Open Source Project Announcement... I have started an open source project to build a module for PHP4 that will allow direct calls to Tuxedo services from the PHP script, the project name is php-tuxedo. Think about it for a second... The ability from
-
Issues once subreport is added to main report.
Another question from a new Crystal Reports Developer. I have been battling this one for multiple days. I have built two seperate reports through Crystal Reports that pull their data through an ODBC connection from Remedy ITSM. One report is pulling
-
Problem with an empty collection
When a procedure executes FOR i IN g_tabla_situacion.FIRST..g_tabla_situacion.LAST LOOP END LOOP; and g_tabla_situacion has no elements, ORACLE returns a "*-6502:ORA-06502: PL/SQL: numeric or value error*" How can I avoid this problem? Now I am doing
-
Changing Invoice Numbers in AP
When we run the Supplier Merge Program any Invoices that have duplicate Invoice Numbers are not automatically merged! What we need to do is to change the original Invoice number and then run the Merge program once again. We have enabled the Allow Adj