Wily Introscope Workstation Latest download Location

Hello, can you provide me the latest download location of Wily Workstation, I tried on the service market place but I found the patch 8 for Workstation but not the Install file.
Points will be awarded upon the proper reply.
Thank you
Sri.

... but not the Install file.
Don´t know what you mean with "install file" but check
Note 797147 - Wily Introscope Installation for SAP Customers
Markus

Similar Messages

Launch Wily Introscope Workstation from SM?

Friends:
The way I launch the Wily Introscope Workstation is:
a. via the Start Menu: ´CA Wily-> Introscope 8.2.2.0-> Introscope Workstation, OR
b. by directly starting the file Introscope Workstation.exe in the installation directory
Is there a transaction in SM to start call Wily Introscope Workstation?
Is Wily Webview an SM transaction?
I appreciate if you can help with this.
Thanks!

Hi,
You can launch Wily webview and workstation from solman using trxn solman_workcenter-->Root Cause analysis or system monitoring workcenter
before use this trxn assign following workcenter roles
SAP_SMWORK_BASIC
SAP_SMWORK_DIAG
SAP_SMWORK_SYS_MON
in both RCA and sys mon workcenter you can find this link under Common Tasks/Related links respectively
Regards,
Shyam

Wily Introscope Version for Solution Manager 7 SPS 17

Hi
We have a solution manager 4 (now 7) running on an ABAP stack only, this was recently upgraded from Solution Manager 3.2 which was installed 3 years ago as ABAP stack only, this server was never powerful enough to have the Java stack added and the project did not require it.
I am now looking to migrate this ABAP Solution Manager 7 to a new server, using ABAP & JAVA so I can make use of Solution Managaer tools like Diagnostics, RCA, WILY etc.
On a sandpit copy I have migrated the ABAP instance to a more powerful server and added the Java Instance from the Solution Manager 4 Installation Master, so I now have a dual stack SM 4, I have patched this to SP17.
I am looking to install Wily Introscope for monitoring, I have read Note 797147 - Wily Introscope Installation for SAP Customers, where it says you should always use the latest version of Wily, which is 8.0.2, but looking at the note, the downloads for Introscope Enterprise Manager and Introscope Workstation are from SAP SOLUTION MANAGER 7.0 EHP 1, but I am not running Solution Manager on EHP1, I am on SP Stack 17.
Looking in the SWDC there are downloads in SAP SOLUTION MANAGER 7.0 -> Entry by Component -> Solution Manager JAVA Stack -> WILY INTROSCOPE ENTPR MGR 8
Is this what I should be using for my SP Stack 17, or should I use the EHP1 version?
Also, setting up the Solution Manager Diagnostics, is there a setup PDF for Solution Manager 7 SP17 ? I cannot find a setup guide for this release, most are for EHP1, I would rather not have to implement EHP1 as part of this migration !
Thanks for any help.
Paul.

Hi Bhudev
Thanks for the reply, I presumed it was the Wily introscope 8 without the EHP1 I required.
As for installation guide, I have think you have misunderstood my question, I already have the wily installation guide from the note location, I wanted to know if there is any Solution Manager Diagnostics setup guides for SP17 ?
When I use transaction SOLMAN_WORKCENNTER --> System Monitoring --> Solution Manager Diagnostics --> Diagnostics System --> Diagnostics Setup --> Setup Wizard
the first 2 (of 23) setups are failing :
SSO The value of profile parameter login/accept_sso2_ticket could not be checked
BI Cannot invoke CCMSBISETUP on host localhost
Warning :
User(BI) Role SAP_BI_E2E does not exist
Then it says :
To complete the Diagnostics Setup, you should perform the following operations as documented in Diagnostics Setup Guide
I cannot find this Diagnostics Setup Guide for SP17 ?
The installation guides are mainly for EHP1, media library under sap-ag.de/diagnostics does not show this setup guide, Master Installation guide does not mention it, so was wondering if anyone could point me in the right direction for this guide ?
Thanks,
Paul.

Wily Introscope Manager

Guys,
I have some questions about Wily Introscope Manager.
What is the difference between Wily Introscope Manager Workstation and WebView?
I noticed that some data are not collected from Wily Agents, for instance: CPU, Servlets and so on..How can I solve those issues?
In the lens area, where the Wily Agents are located for the same server there are two kinds of classifications, such as: SAP HostAgent SMD 96 and <SID>_DVE..._servername. What is the difference between them?
Thank you so much again Experts
Rer

Hello Rer,
What is the difference between Wily Introscope Manager Workstation and WebView?
Webview = Html version using Microsoft SIlverlight
Workstation (also called Investigator) = Java version
The latest is recommended since it has more features and it is more stable.
I noticed that some data are not collected from Wily Agents, for instance: CPU, Servlets and so on..How can I solve those issues?
See the SMD Agent log files, it is responsible for such data. Report problems here or in customer message.
In the lens area, where the Wily Agents are located for the same server there are two kinds of classifications, such as: SAP HostAgent SMD 96 and <SID>_DVE..._servername. What is the difference between them?
These two locations are below the trees SAP HostAgent Process and SAP Netweaver. The first one is the host data + abap data (extracted from SMD Agent, SAP HostAgent, sapOsCol) and the second is Netweaver data extracted from the Introscope Agent.
Problems in the first node, check smd agents, setup wizards.
Problems in the second, check introscope setup.
Best regards,
Guilherme

How to add managed system in Wily introscope system

Hi All,
Can anyone provide the document on how to add managed system in Wily Introscope?
With Regards
Ashutosh

Hello,
The documentation for WilyIntroscope is located at
http://service.sap.com/diagnostics
> Media Library
Here you can find user guides and installation guides for WilyIntroscope.
But the overview is you install Enterprise Manager on a server that becomes the EM Server and then IS Agents on the managed system. There is an installation guide for EM and this ISAGENT setup is part of managed system setup in Solman_setup.
Your tools to manage are Webview and Workstation, and there is documentation for these at the above mentioned link as well.
Regards,
Paul

Wily Introscope collects/shows only from saposcol

Asked to check why Introscope was not working, I found that it was not
running (enterprise manager and java agents).
I started them without problems,
but the Introscope workstation, at the panel "SAP J2EE Overview" shows me
only CPU usage of PI system (I think from saposcol) and nothing about PI Java instances !
Where have I to check why Introscope agent doesn't show other info
(enqueue, EJB, UM, Memory, JCO, JDB, Servlets, Threads) of Java instance ?
I've started
- EM, as root into the solution manager host, with command nohup runem.nohup.sh & from /usr/sap/ccms/wilyintroscope
- the agent, as smdadm into PI host, with ./smdstart.sh & from /usr/sap/SMD/J98/script.
Introscope stopped his execution sime months ago.
My colleagues told to me that the Wily stopped working after upgrade sol man from 7.0 to 7.0 ehp1
Thanks in advance.

I used the latest version I found:
SAPISEM02_0-10007433.SAR - introscope8.2.2.0windowsAMD64SAP.exe
osgiPackages.v1.2.windows.zip
SAPISMM8SP01_00-10007429.SAR - SAP Management Modules
I have one NonFatalErrors. I found that i can ignore it.
Summary
Installation: Successfulwith errors.
395 Successes
0 Warnings
1 NonFatalErrors
0 FatalErrors
Execute ANT Script:       Script:
                          Status: ERROR
                          Additional Notes: ERROR - D:\usr\sap\ccms\wilyintroscope\install\em.installer.exec.ant15.xml:451: exec returned: 1

Need help changing the default download location in Firefox3.6.16

<blockquote>Locking duplicate thread.<br>
Please continue here: [/questions/808920]</blockquote><br>
I have been having default download location problem for over a year now and no one has been able to offer a solution so if you can figure this out, well, I can't say enough good about you.
Here's my problem. I'm an online math instructor for a college. I use Firefox 3.6.16, and have also tried the latest version. Os is Vista. Students email me Microsoft Word 2007 documents every day as attachments to email. I click on the documents, make corrections and when I go to save their document to my computer, the default always wants to save it in a temp file! I read where Firefox is supposed to default save in the desktop (which is where I want it to default to, but that never happens). When the save defaults to the temp file, I have to scroll up numerous files and find the desktop option and click it to save it on the desktop. This is not a huge deal until you have to do it for 90 students and then it becomes time consuming.
Numerous times I have followed the standard process of (TOOLS>OPTIONS>SAVE FILES TO DESKTOP) within Firefox but that never works. I've reinstalled Firefox, that doesn't work. I've also tried to change the "Save Options" settings within Word 2007 and that hasn't solved the problem either. Please advise if you have a solution. Thanks in advance!

Hi,
"Security rules that are created for a large number of users can be centrally stored on a server by an administrator. The administrator can use the registry values below under the registry key
[HKEY_LOCAL_MACHINE\Software\SAP\SAPGUI Front\SAP Frontend Server\Security]
to configure the behavior of the security module.
Note: For 64 bit operating systems please use the following registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\SAP\SAPGUI Front\SAP Frontend Server\Security]
to configure the behavior of the security module."
You can use regedit for installing this values.
Best Regards,
Aleh

Error while installing Wily Introscope

Hi All,
I have installed introscope enterprise manager 8 in solution manager 7.0 (SP15). i have follwed the below steps:
1. Installation and Setup of SAP Solution Manager Server:
               upgrading SAP Solution Manager Diagnostics (SMD) package
               running Diagnostic setup wizard
everything went successful.
in the next step of wily introscope installation i have followed the below steps:
2. installing CA Wily Introscope
           I.   Download Third-Party External Component Package from CA Wily
           II.   elected Platform Independent Introscope Installer
           III. Extracted the Introscope Installer
          IV. Added the External Component Package
          V. Started the Installer
          VI. Verified the Installation
          VII.Installed the SAP Management Modules
         VIII.Ran the Enterprise Manager from OS level (AIX)
          IX. Checked That Introscope Is Running Properly
          X. Extracted the Introscope Agent
          XI. Created an AutoProbe Connector
         XII. Activated the Agent: Setting up Java VM Parameters -
here I am facing the issue
in the installation manual it has been given to add the below java parameters to server node:
-Xbootclasspath/p:/usr/sap/ccms/wily/connectors/connector.jar:/usr/sap/ccms/wily/Agent.jar
-Dcom.wily.introscope.agentProfile=/usr/sap/ccms/wily/IntroscopeAgent.profile
-Dcom.wily.introscope.agent.agentName=<AgentName>
i have added the above parameters and resterted the server then the java engine is not coming up. conflicting with the first parameter. once I remove that parameter I am able to up the java engine.
without being added the above parameters " the agent will not start".
please help me in this.
thanks in advance
Mohan K

Mohan,
I have the same problem. That is I set up the SMD on the managed system and completed the Managed system configuration through Solman which Installed Wily Introscope. With Wily enabled , the Java server process does not start.
If I delete the 3 lines that have wily in it, it starts OK.
How did you resolve this problem. Please let me know in detail.
Thank you.
Ravi

Wily Introscope 8.2.2 - No License for Wrapper service

Hi All,
I've installed the Wily Introscope Manager 8.2.2. When starting the EM service, I get the following error message in the log file:
STATUS | wrapper | 2010/09/20 15:10:47 | --> Wrapper Started as Service
STATUS | wrapper | 2010/09/20 15:10:47 | Java Service Wrapper Standard Edition 32-bit 3.3.6
STATUS | wrapper | 2010/09/20 15:10:47 |   Copyright (C) 1999-2009 Tanuki Software, Ltd. All Rights Reserved.
STATUS | wrapper | 2010/09/20 15:10:47 |     http://wrapper.tanukisoftware.org
STATUS | wrapper | 2010/09/20 15:10:47 |
ERROR | wrapper | 2010/09/20 15:10:47 | License Error:
ERROR | wrapper | 2010/09/20 15:10:47 | A valid license was not found in the Wrapper configuration file.
ERROR | wrapper | 2010/09/20 15:10:47 |
ERROR | wrapper | 2010/09/20 15:10:47 | A license can be obtained from the Java Service Wrapper site:
ERROR | wrapper | 2010/09/20 15:10:47 |   http://wrapper.tanukisoftware.org/doc/english/purchase.html
I believe that Wily is licensed as part of the Solution Manager Enterprise edition. So why do I need to buy an additional license?
Regards,
Masoud

Hi
For the Wily Introscope Enterprise Manager 8.2 the error you described
occurs if the em-include.conf file is missing in the EM' installation.
This file is included into the SAP managed modules SAPISMM02_0*.SAR
file.
Note that for Wily Introscope EM 8.2.2 you need to install the SAP
management modules after the installation of the EM 8.2.2 AND before
you attempt to start the service
Please refer to the Node 797147 for the documentation about the
the SAPISMM02_0*.SAR - management modules to be installed on top of
Enterprise Manager.
Please consider additionally the Note 1273028
- The Enterprise Manager can only be launched as Windows Service
after the latest management module package (SAPISMM) has been
installed. The SAPISMM package contains a file em-include.conf
which is required.
I would like to ask you to implement the Note 1273028 and to retest the
issue.
Best Regards
Jai Wardhan

Wily Introscope Enterprise Manager fails to start due to Java Heap

Hello All,
I just installed Wily Introscope for the first time. I have successfully installed it from the log below:
Summary
Installation: Successfulwith errors.
396 Successes
0 Warnings
1 NonFatalErrors
0 FatalErrors
I also confirm that the Introscope Enterprise Manager is started as a service.
However, when i try to launch enterprise by following the path All Programs > CA Wily > Introscope 8.2.3.5 > Introscope Enterprise Manager....
I get the error below:
3/29/11 07:11:46 PM PDT [ERROR] [Manager.Bootstrap] Load all Management Modules FAILED.
3/29/11 07:11:46 PM PDT [ERROR] [Manager] The EM failed to start. Java heap space
I have also adapted my Java Heap from 512 to 1024 in EMService.conf file but I still get same error. This was the recommendation in this related forum post - Wily Introscope - EM failed to start
Please help!!!!

Hello,
Like I said, I have increased the value to 1024MB and still not starting.
The corresponding section of the EMService is pasted below:
Wrapper Properties
Java Application
wrapper.java.command=jre
bin
java.exe
wrapper.working.dir=.\
Java Main class
wrapper.java.mainclass=org.tanukisoftware.wrapper.WrapperSimpleApp
Java Classpath (include wrapper.jar) Add class path elements as
needed starting from 1
wrapper.native_library=ServiceWrapper32
wrapper.java.classpath.1=./lib/ServiceWrapper32.jar
wrapper.java.classpath.2=./launcher.jar
#wrapper.java.classpath.3=
Java Library Path (location of Wrapper.DLL or libwrapper.so)
wrapper.java.library.path.1=./lib
Java Additional Parameters
Note: On 64-bit Windows only, the first additional parameter must be: -Xrs
#wrapper.java.additional.1=
wrapper.java.additional.1=-Xrs
wrapper.java.additional.2=-Djava.awt.headless=false
Initial Java Heap Size (in MB)
wrapper.java.initmemory=512
Maximum Java Heap Size (in MB)
wrapper.java.maxmemory=1024
Application parameters. Add parameters as needed starting from 1
wrapper.app.parameter.1=org.eclipse.core.launcher.Main
wrapper.app.parameter.2=-consolelog
wrapper.app.parameter.3=-noExit
wrapper.app.parameter.4=-product
wrapper.app.parameter.5=com.wily.introscope.em.product
wrapper.app.parameter.6=-install
wrapper.app.parameter.7=./product/enterprisemanager
wrapper.app.parameter.8=-configuration
wrapper.app.parameter.9=./product/enterprisemanager/configuration
Number of seconds to allow between the time that the Wrapper launches
the JVM process and the time that the JVM side of the Wrapper responds
that the application has started. 0 means never time out. Defaults to 30 seconds.
wrapper.startup.timeout=300
Please help

Error while installing wily introscope 9.1.5.0

Dear Gurus,
While i tried to install the wily introscope 9.1.5.0, it ends with below error. please guide me to install.
Invalid External Component Package Specified
The specified package, /oracle/stage1/willy/osgiPackages.v9.1.5.0.unix.tar, is not the expected version. This Introscope installer expects version 9.1.5.0 of the external components package.
Edit the responsefile so that the externalComponentPackage property refers to version 9.1.5.0 of the external components package, then rerun the silent installer.
Balaji

Hi Divyanshu,
i copied the downloaded files in that stage directory and install it.
i used 797147 - Introscope Installation for SAP Customers for downloading the required setup files and for externel package is used Index of /ips/osgi/introscope_9.1.5.0
Balaji

Wily Introscope Enterprise Manager Can't be accessed

Hi Experts,
I installed Solution Manager 7.0 EHP1 and executed basic configuration. And I followed the instruction to install wily EM 8.0. But after installation, the web pages http://emhost:8081/workstation and http://emhost:8081/webview cannot be accessed. Error msg is "404 Not Found The requested resource does not exist."
I've checked the wily log and found no errors. How to solve the problem?

Hi ,
Check if the installation of EM 8.0 was successful or not.
For the same, please check <Introscopehome>/install/Introscopeinstall.log.
I am hoping your installation is successful. Then please perform some other checks.
Please start your Introscope Enterprise Manager service from Windows Services [ for other OS please refer to guide]
Check the <IntroscopeHome>/log/IntroscopeEnterpriseManager.log
file for an Error entry.. there may be a possibility that the Port 8081 [or 8080] is already in use.
Similar format to error message :::
"EM Web Server did not start. Port already in use: 8080 To change the Web Server port, modify the EM property: introscope.enterprisemanager.webserver.port "
If yes, then please modify the \conf\EnterpriseManager.properties file
introscope.enterprisemanager.webserver.port=8080
OR
introscope.enterprisemanager.webserver.port=any other open port
For more details about changing port please refer to Thread
Wily Introscope Enterprise Manager 7.2 is not starting on SolMan system
I hope the provided information will be helpful.
Best Regards,
~~ Pradeep Bishnoi ~~

Wily Introscope and "searchPrincipalDatabags"

We have installed Wily Introscope (downloaded from SAP support) on our sandbox and Development environment and so far so good.
We have the enterprise manager installed and have agents loaded on two SAP Enterprise Portal systems and both are sending data to the Wily enterprise manager. One of the two system seems to be locking up after about 2 hours of operation.
We need to understand how to analyze the data we are receiving in WILY to troubleshoot our issue.
Questions
1) What is the best method to obtain info on how to analyze the data in Wily enterprise manager?
2) We can see that just before the system stalls/locks up there is one "process" that seems to stand out: previous to the lockup this process is quick but then the number jumps up high to 120049
example:
SAP J2EE|User Management|DataBasePersistence|searchPrincipalDatabags 1 120049 120049 120049 120049
What is searchPrincipalDatabags? and is there a known problem with this?
Any input is appreciated

> Depends on what you mean by big? We have 3066 users
> and we are NOT using an external LDAP, thus we are
> using the standard portal user store.
Ok. We had issues with UME when someone wanted to see "all" users - who are stored in an external LDAP, that locked the server process too.
> I have opened a OSS ticket, but did not assogn it to
> (XX-PART-WILY) because I'm under the impression that
> this is a portal issue, And I just need to be able to
> interprete the info coming from Wily? does this sound
> correct?
Is the portal also locking up if the "wily agents" are not loaded?
Markus

Wily Introscope as monitoring tool?

Hello everybody,
we are looking for a tool capable of monitoring Systems with usage type "java", e.g. Enterprise Portal oder Process Integration.
Has anybody experience with Wily Introscope, e.g. concerning usability?
Whatever experience
Thanks a lot
Thorben

Yes Wily is a very usable monitoring and diagnostic toolset for the J2EE platform. This is especially true for the NetWeaver Portal. SAP has gone to great lengths to instrument the Portal Stack and provides thousands of metrics on a typical Portal and there are tools to Monitor, Analyze, Trace, Track Errors all as part of the Read-only version delivered by SAP.
The pre-configured dashboards are quite nice. The newer release allows use of the Introscope Workstation Version 7.1 product which is more feature rich than the WebView user tool, and this is a plus.
If you want to integrate to an automated Alerting System you'll have to buy the Solution Enablement Pack. You can read more about this at service.sap.com/diagnostics.
Frank

SM Wily Introscope Version 8 doc question

We also installed Wily Introscope Version 8, however there was a part mention as below
The Solution Manager Diagnostics provides an application that performs the setup of the
Introscope bytecode agent for Java automatically. This section explains the steps to run
the setup. Before you can run the Introscope agent setup, the setup wizard for the
managed system must have been executed.
1. Enable Maintenance Mode on SMD.
2. Deploy ISAGENTSMD*.SCA using SDM.
3. Disable Maintenance Mode on SMD.
4. Launch the Introscope Setup application: Diagnostics Setup -> Managed Systems ->
Introscope Agent. Your screen will look similar to the image below:
Questions:
1) How do I go into SMD ? I did use http://<SMserverFQDN>:50000/smd however I only get a header but blank content body in IE or FireFox? Where do I enable maintenance mode?
2) Where do I launch the Introscope Setup Application: Diagnostics Setup ?
I can't find it under Introscope workstation console.
Thanks.

Hi,
Regarding your questions, please kindly check
Root Cause Analysis Installation and Upgrade with SOLMAN_SETUP
>>>
from https://websmp202.sap-ag.de/diagnostics.
Hope this helps.
Cheers
SH

Wily Introscope Workstation Latest download Location

Similar Messages

Maybe you are looking for