Wilyhost Agent(s) from host hostname are connected to the EM
Hi All!
I tried complte setup managed system/. And received following message:
Wilyhost Agent configuration finished without errors, but on Enterprise Manager (host:port) no Wilyhost Agent was detected from host SSM. Please check the log file jvm_smdagent.out whether the Wilyhost Agent could connect to the Enterprise Manager. If the Enterprise Manager configuration has been changed recently please restart the SMD Agent on OS level.
in jvm_smdagent.out:
11/12/09 03:40:40 PM GMT+03:00 [INFO] [IntroscopeAgent.Isengard] Initiating connection attempts to the Introscope Enterprise Manager.
11/12/09 03:40:40 PM GMT+03:00 [INFO] [IntroscopeAgent.Isengard] The Agent reconnection delay is set to 15 second(s).
Warning ! Protocol Implementation [com.sap.engine.services.webservices.jaxrpc.wsdl2java.features.builtin.MessageIdProtocol] could not be loaded (NoClassDefFoundError) !
Error Message is :com.sap.guid.GUIDGeneratorFactory
11/12/09 03:40:41 PM GMT+03:00 [INFO] [IntroscopeAgent] Started Error Reporting service
11/12/09 03:40:42 PM GMT+03:00 [INFO] [IntroscopeAgent.IsengardServerConnectionManager] Connected Agent to the Introscope Enterprise Manager at host:port,com.wily.isengard.postofficehub.link.net.DefaultSocketFactory. Host = "HOST", Process = "SAP HostAgent Process", Agent Name = "SAP HostAgent J98".
Warning ! Protocol Implementation [com.sap.engine.services.webservices.jaxrpc.wsdl2java.features.builtin.MessageIdProtocol] could not be loaded (NoClassDefFoundError) !
Error Message is :com.sap.guid.GUIDGeneratorFactory
Could anybody help me resolve it?
Thanks for your advance,
Alexander
Hi,
we also have the same error...
LM-SERVICE 7.01 SP5 (1000.7.01.5.2.20091211060559)
LM-TOOLS 7.01 SP4 (1000.7.01.4.2.20090723091137)
My problem is that I don't get any data of our KWP ABAPsystem in Wily. The Agent is running and is well connected (The lights in agent administration are all green). Also in the logs I don't see any probs.
I have restarted the agent 1000 times..., reseted the server name and ran the agent setup again... I also registered it via
./smdsetup.sh sldconf hostname:"solman" port:"59500" user:"username" pwd:"xxxxx"
./smdsetup.sh managingconf hostname:"sapms://solman" port:"8196" user:"SMD_ADMIN" pwd:"xxxxx"
Do u have any ideas???
Regards
Johannes
Similar Messages
-
i have an iphone and an ipad (which are connected by the same apple id) i broke the phone and sold it but i didnt get to factory reset it because it was broken, is there any way for me to wipe my iphone from my ipad?
Try this:
Open the "Find my iPhone" app on your iPad, fill in your AppleID and password at the start up screen, and you should see a list of all your devices and their current location, if connected to a Wi-Fi or mobile data network. Devices not connected will be shown as "offline". But you can still trap on the icon and hit "erase iPhone" in the right hand window.
If your iPhone is not listed, you did not activate this feature during the setup of the phone and it can't be erased remotely.
If the phone is listed, even as offline, tap on "erase" to send the erase command. The next time your device will be connected to any kind of network, the content will be erased. -
Hi everybody,
we are currently using the PCI-DIO-96 for data acquisition from an old AT-DIO-32F card. All PPIs and ports work in mode 0 (standard input/output). The manual mentions the possibility to create an interrupt from an external signal connected to the lines PC0 and PC3 of port C from a PPI. To get the interrupt I have connected my interrupt service routine to the PCI-DIO-96, enabled the master interrupt enable bit in the interrupt configuration register 2 and enabled interrupt enable bits of every PPI chip in the interrupt configuration register 1. The interrupt should be generated if a signal low-to-high transition occurs on th
e lines PC0 or PC3 of a PPI. We've simulated the signal low-to-high transition with an external voltage source connected to the line PC0. We actually saw in the memory that the line toggled from state low to state high, but no interrupt was generated. I don't have a guess what I am doing wrong. Perhaps anybody knows the solution of this problems.
Thanks and best regards.
Sven JungnickelYou may want to try disabling your USB or IEEE-1394 host controller. It's possible that one of these devices could be on the same interrupt as you DIO-96 and causing the interrupt to not be serviced.
Regards,
Erin -
Find how many users are connected in the Oracle Server
Hi,
I am using Oracle 10g. My question is, is it possible to find how many users are connected in the Oracle Server. We are having one Server and we are having many client machines which will connect the Oracle.
And one more question in the meanwhile i want to take Backup of one database which client as connected. Is it get any problem to the client machine which is accessing the server. And How to take the backup from the server machine. Any commands to process.
Thank u...!Hi there.
If You run
select count(*) from v$session where username is not null;you'll get the number of users connected to Oracle server,
and yes , you could do backup while users are connect to db you are backing up.
cheers -
No updates unless clients are connected to the Internet.
I'm fairly new to this, so please forgive me if my terminology is off. I've just come into a new organization and don't really know much about how everything is laid out yet (first week here). The other IT guys throughout the organization have
been attempting to set up WSUS at three separate locations. Their first plan was to set up a central WSUS at a single location and have the updates be pushed out over the VPN. This did not work for them, so they decided to set up a WSUS server at each location.
To make a long story short, one location is working without issues, but at another location's workstations are not updating via WSUS unless they are connected to the Internet. Has anyone else experienced this issue?WSUS can be implemented a number of ways. One of the methods, is to use WSUS only for the approvals but update files are downloaded from microsoftupdate.com.
Your scenario sounds a little like that.
you should check the windowsupdate.log of a few client machines, which should reveal a lot about what's happening.
You should also check the configuration on each of the WSUS servers, to determine the upstream/downstream/autonomous/replica status of each WSUS, and, each will have a configuration setting for "where to store update files" (store updates locally).
http://technet.microsoft.com/en-us/library/dd939859(v=ws.10).aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
EFax: "Registration was unsuccessful. Check that you are connected to the Internet, then try again."
Trying to use eFax, I am required to register first, but when trying to register, I get to a screen that says "Registration was unsuccessful. Check that you are connected to the Internet, then try again."
The printer is connected to the Internet: it recognizes the Wifi, the Wireless Network Test checks out OK, and all the other functions which require an Internet connection still work.
So it is only registration for eFax that does not recognize the printer as being connected to Wifi.
Thank you, anyone who reads this, for your attention to this matter and time.Hello brianspears1776,
I understand that the Photosmart 7510 will not connect to the Internet to setup eFax, and the issue is only present when trying to use eFax. On this Thread: efax for 7510, I have given the link to troubleshooting issues with sending and receiving, worth a look. Also, JDCorral as mentioned a problem with his series of printer and eFax a couple posts down from the troubleshooting.
More information regarding eFax can be reviewed here: eFax users - please read.
I know this is not the technical support you had been looking for, but I hope it is still helpful.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping! -
my widget browser keeps showing "failed getting widget feed" and keeps saying "failed getting widget feed and make sure you are connected to the internet" when I am connected to the internet. How do I fix this?
Widget Browser is gone. Adobe pulled the plug on it quite a while ago.
See this related discussion from earlier today.
Widgets a Gone Gone
Nancy O. -
I have a IPhone 5 and Iphone 5s, each phone is activited with a different service provider. Both are set up with the same account ID and running IOS 8.0.2. When the phones are connected to the same Wifi at home, both phones will ring when someone call in to one of the phone. Hence you do not know exactly which line the caller called. If you answered using the wrong phone, then anyone calling the other number will not get through. Anyway to solve this problem?
Hey David Koh TP,
Thanks for the question. It sounds like your devices are set up to use continuity together. Specifically, it sounds like you are signed into the same Apple ID in FaceTime, and have iPhone Cellular Calls enabled. To resolve your issue, simply disable this setting:
Connect your iPhone, iPad, and iPod touch using Continuity
http://support.apple.com/kb/HT6337
Turn off iPhone cellular calls
To turn off iPhone Cellular Calls on a device, go to Settings > FaceTime and turn off iPhone Cellular Calls.
Thanks,
Matt M. -
I recently bought an iphone 4s from people who are not in the know
and restore my iphone .. Now do not be in use for not having ID and password ... Owner apple owner just gave me a serial number how do I want to continue to use this ... Their telephone help me: (I am having same problem . i can not use the phone. my Carrier ROGERS checked the phone its not stolen or lost phone but after restoring always ask for apple ID of previous owner and seller is not responding to any mails or phone if some one can help me out than it will be great.
thank you -
how do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the online photoshop, and I really want to create my own customized url and post photos to my gallery and share them with the world, family, and friends, but i need help because i can't figure how to do any of this, would really appreciate feedback and assistance, thanks, - claire conlon
To add to sig's reply, "calibrating" does not calibrate Lithiu-Ion batteries, it calibrates the charge reporting circuitry. If you look at the effect of deep discharging Lithium-Ion batteries in the data from the independent test group, Battery University, you will see that doing so shortens the life of the battery significantly. It looks like an optimum balance between use and life is at a discharge level of 50%.
-
I have followed all relevant steps, my iPhone5 and apple TV are connected to the same wireless network, but I still cannot use airplay. When I choose the airplay option on my phone, the only option I get is "iPhone"
Welcome to the Apple Community Willy.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device. -
I just purchased an AppleTV and am trying to connect AirPlay with my mac (2012 model) In 'system preferences > displays' an airplay menu is listed but it says 'no device detected'. My AppleTV and macbook are connected to the same network. Any suggestions why it is not working?
Troubleshoot the network as that is likely what is causing the issue.
Also, temporarily disable the firewall on the Mac and disable IPV6 on the computer. -
"Help" menu always says: "The current topic is currently unavailable." " Make sure you are
connected to the internet." I am connected to the internet.Please restart your machine and try again.
Thanks -
cannot connect to Net, have done for last 12 months no problem, I have other apple products that are connecting to the same hub happily. The hub is seen and the signal is strong, it just doesn't connect. I have reset the network settings with no joy. Any help much appreciated?
Try restarting your WiFi router by removing power to it for 30 seconds.
-
How do i type in tamil in microsoft office for mac? my previous tamil documents from my pc are not displaying the font correctly, nor am i able to use the inbuilt mac tamil font to write in microsoft office
You should probalby post your question on Microsoft's own forums for their Mac software since it's their stuff you're asking about:
http://answers.microsoft.com/en-us/mac
Maybe you are looking for
-
Problem with languages in a servlet
I've created a guestbook servlet that receives requests from an HTML page. When checked it worked fine. The problems started then I tried to add entries in other languages to the Database. I've noticed that my characters for some reason were replaced
-
This is beginning to really annoy me. I can't find a simple way to create and use playlists using Windows Media 0 and my Zen Micro. While it's very easy top create a playlist in WM0 and then sync it's contents tothe Zen, how do I then play that playl
-
How to get the view tree from a jsp page
Hi, I would like to get the view tree of a jsp page. The idea is to dynamically include the content of one or more jsf pages into a UIPanel during a "value changed" event. So, i could get from an arbitrary page like ... <%@ taglib uri="http://java.su
-
Thanks for your precious time in looking at this thread. // I compile this class that I have done c:\test>javac Echo01.java // I tried to echo the information in xml file onto command prompt c:\test>java Echo01 webservice.xml // This is the result <?
-
How to make a highlight video from a DVD?
I want to make a highlight video from a dvd. How do I get this dvd into iMovie? I tried the import feature but I am getting an error stating it doesn't see any movies on the DVD.