Win 10 Upgrade and Power Manangement Issues

I have an S230u Twist. After upgrading to Win 10 I have the following outstanding issues: The most problematic is that after the upgrade I have an issue with the unit going to sleep. Upon waking, the screen brightness resets to about 5%. It doesn't do this all the time but often enough be irritating. I've turned off adaptive brightness but this doesn't help. I've run System File Checker which made some fixes to corrupt files and this helped somewhat. Lenovo Solutions Center reports that the Power Management Software is not installed even though I 've upgraded the Power Management driver with the Win 10 version. I'm at a loss to know what to check next to fix this. The other issue concers the start menu - the "Most Used" doesn't seem to update with the Most Used programs I use (most which are on the Task Bar). Any support I can get on the Power Management issue would be most appreciated.

I spent more hours trying to resolve. Down loaded driver 355.60 Win 10 64 bit (355.60-notebook-win10-64bit-international-whql)Uninstalled current driver and software via device manager.Expanded the driver and ran setup. Performed a custom install without GF Experience. Install went through fine and rebooted after removing software.Came back up and continued install and completed with no errors. Ran device driver and confirmed driver installed. Set GoogleEarth to run with graphics processor.Everything seemed okay.Set desktop to include in notification tray and Display GPU Activity so I could see that GE was running in processorThen launched GE with 3 buidings and citties. Ran site seeing tour.Crashed after a couple of minutes with System_thread_exception_not_handled and rebooted. When it came back up I turned of to show in notification tray and turned off GPU activity.Re-Ran GE and it lasted a bit longer and then crashed with the same errorSystem_thread_exception_not_handled and rebooted. Would welcome any further help.

Similar Messages

Network Card turned off and Power regression issues.

Hello,
Can any one please help me setup wifi/ethernet on my Thinkpad t420? It has Intel Wifi Link 1000 BGN. If i am not wrong it is suppose to work by default. How and what modules do i have to load to turn on my wifi card? I know how to make wpa_supplicant work.
Their are power regression issues with linux kernel. How can i make pacman to not to upgrade to latest kernel releases?
Thanks.
PS:- I have done research but couldn't come find an answer. Sorry if this question has been asked many times.

Check http://intellinuxwireless.org/?n=Downloads for intel wifi drivers
Pacman should not syncronize system wide missing packages unless specified with the -u [OPTION] on the -S [SYNC] argument, see the man pages on pacman.
http://www.archlinux.org/pacman/pacman.8.html
Also make sure you have done all the stuff on wireless setup in the beginner guide, it is very comprehensive
https://wiki.archlinux.org/index.php/Be … cessary.29

Battery charging and power adaptor issues

I'm having slight issues with both my power adaptor and the battery itself.
First I think I have cord issues as the light status can change from dim green to red or bright green if I move the cord around.
Second, my MBP is having trouble recognising if power is going to the battery or if it's charging etc. It can recognise if there's no adaptor connected at all, but if there's an adaptor connected, it has trouble seeing if there's power coming from the adaptor even if the light is on. I.e. it can stay at 100% and supply comes from the power adaptor and then suddenly drop to 80% power and start charging agan. One issue that happened earlier today was the adaptor was connected, and the battery indicator was at 100% with supply from the adaptor. Suddenly the MBP shutdown, and when I rebooted it was at 17% (I've tried repeating that in case of a dodgy battery but I couldn't)
System profiler Power information: (MPB is 18 month old)
Battery Information:
Model Information:
Manufacturer: SMP
Device name: ASMB012
Pack Lot Code: 0002
PCB Lot Code: 0000
Firmware Version: 0110
Hardware Revision: 0500
Cell Revision: 0200
Charge Information:
Charge remaining (mAh): 4779
Fully charged: No
Charging: Yes
Full charge capacity (mAh): 4876
Health Information:
Cycle count: 111
Condition: Normal
Battery Installed: Yes
Amperage (mA): 285
Voltage (mV): 12603
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 0
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: No
Current Power Source: Yes
Display Sleep Uses Dim: No
Battery Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 0
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0100
Wattage (W): 85
Revision: 0x0000
Family: 0x00ba
Serial Number: 0x00527d2c
Charging: Yes

Try an SMC reset.
http://support.apple.com/kb/HT3964
If that doesn't help, the problem could be the adapter, the battery, or the I/O board (or a couple of less likely things). If you can borrow another adapter and/or battery, try them to see where the problem is. Or, if you're near an Apple Store, take it in and they'll diagnose it for you (for free, but they will charge for repairs if you need them and don't have AppleCare).

CRM2007 upgrade and IC webclient issue.

Hi all,
We have successfully upgraded from crm4.0 to 2007 last weekend.
However when I launch IC Webclient, it is blank. Is there something that I missed?
Also, I have applied note 1144511, still same issue.
Regards,
KG
Edited by: KG on Mar 17, 2008 7:06 PM

Hi KG,
May I know how you started the IC webclient in CRM 2007?
Are you using crm_ic transaction?
For CRM 2007, different steps have to be used.
For CRM 2007, you might have to use transaction
bsp_wd_cmpwb and component = crm_ui_frame to test.
This will start the new WEB UI with a user id has business role related to IC Webclient. The standard role is IC_AGENT.
You may have to assign it in ppoma_crm for the position using the same step as you assign a ic webclient profile, but instead, you need to assign a business role = IC_AGENT.
Hope these could do help!
Hongyan

Exchange SP2 to SP3 RU7 upgrade and any know issues with the Dialogic Gateways

We are planning on upgrading out Exchange servers from SP2 to SP3 RU7. We are currently using an Avaya phone system and have Dialgoc gate2ways between these systems to allow us to get the voice mail into the end user's mailbox as a wav file. We are using
the DMG2120's with code many years old. Has anyone had any issues or know of anyone that has had issues?

Hi,
I have checked the your question from our internal channel and did not find any related compatibility issues with the update. I also check the third-party forum but still cannot find any threads about any potential issues.
I think we can feel free to do the upgrade. If you would like to double confirm the question, you can also ask a question in Dialogic forum for more help:
http://www.dialogic.com/den/developer_forums/f/default.aspx
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
Additionally, there is an article about the IP gateway partners, AudioCodes and Dialogic, to add to the list of PBXs that are tested
by Microsoft currently:
http://technet.microsoft.com/en-us/library/ee681657(v=exchg.141).aspx
Regards,
Winnie Liang
TechNet Community Support

Java upgrade and new Safari issues

Just upgraded Java (55) on my iMac and now can't swipe pages with my mouse in Safari? Anyone else having this issue?

Desktop ?
Check your settings in System Preferences > Mouse > More Gestures
or laptop ...
System Preferences > Trackpad

Upgrading and account owner issue

I would like to upgrade one of my phones online. When i press upgrade the next thing that comes up says :
The following activities are reserved for the Account Owner, the person financially responsible for the account.
Help please

I think you've found the issue in your own post. The account you are logged in with is not designated as the account owner. If that's not correct (you are the owner, and you are logged into your account), you'll need to call Verizon to have them properly designate the account owner. Each line on a family plan can have a MyVerizon login.
If you aren't the account owner, you will need to have them log in and process the upgrade from their account.

TS3899 ios 6 upgrade and yahoo mail issues.

I upgraded to ios 6 and now I am unable to log into yahoo maii from my iPad or iPhone. Any one have any suggestions?

I am having the same issue. However, I am accessing Yahoo! email via Safari and it still automatically logs me out when I use my iPhone.

ITunes upgrade and iPod syncing issues

I opened itunes and it said there was an upgrade for it. I installed it and when I plug in my ipod, it syncs, then when I try to sync it again, it does not. on the initial opening of itunes I noticed that windows has the ipod drive listed as "G". upon syncing it disappears. I unplugged the ipod and then plugged it back in. windows again recognizes the ipod and the ipod automatically syncs when connected so it can find it in itunes. as soon as its done syncing, again it disappears from windows. there has to be a fix for this. as far as I can tell its in the itunes software that is causing this because I have not changed any drivers. any help would be greatly appreciated.

If you don't want to do manual update, theres nothing else we can really recommend. You might want to invest in a cheap External drive and put all your music on it. You can get one for 100 or less if you shop around

SP 12 upgrade and script logic issue

Hi All,
We upgraded to BPC 10 SP 09 to SP 12. The system was stable for some days but after 15 days it seems like script logic has got corrupted.
Please find the images below, Any ideas what is the problem

Hello,
Please clarify what you mean by copy, did you copy the script (text) from one open client session to another or did you use back up and restore to copy the environment or any other method.
I recommend checking if this is a client or server side problem. You can verify this either by opening the logic on a different client machine or by checking the logic directly on the server using UJFS.
If this has occurred on the server level I recommend just rewriting the content, through BPC web client, validate and save again and check if that fixes the problem or if the problem occurs again.
Best Regards,
Leila Lappin

T530 Win 8 optical drive power off issue resolved

I found that my optical drive would power off & couldn't power it on (like many of you) when it arrived md Nov.
Did a bunch of research & tried a lot of things and it finally stayed on.
A few days ago it was powered off again. Finally noticed that the day before I got an auto download of Lenovo's power manager.
I 'uninstalled' it & the drive stays on.
Needless to say I turned off auto updates.
Hope this helps someone out there.

mobal wrote:
What is the solution? How to revert to a pervious Intel Rapid Storage driver?
Yes. You need to install the 11.2.0.1006 version of the Intel Rapid Storage driver. Here's the manual install process from the README file:
Installing files
12. Select Start.
13. [Windows 7/Vista]
Right-click Computer, and then select Properties. At the left pane, select
Device Manager.
[Windows XP]
Right-click My Computer, select Properties, select the Hardware tab, and
then select Device Manager.
14. Double-click/double-tap the IDE ATA/ATAPI controllers or Storage
controllers category.
15. Double-click/double-tap either of the following devices;
Standard AHCI 1.0 Serial ATA Controller
Intel(R) 7 Series Chipset Family SATA AHCI Controller
Intel(R) 5 Series 6 Port SATA AHCI Controller
Intel(R) Mobile Express Chipset SATA AHCI Controller
16. Select the Driver tab, then select Update Driver Software...
17. Select Browse my computer for driver software.
18. Select Browse..., then point to driver location specified in step 9.
19. Make sure the checkbox next to "Include subfolders" is checked and select
Next.
20. Follow the instructions on the screen to complete installation and restart
the computer.
Delete the file saved in the step 4.

IPad 3rd gen crash and power off issue

I have ipad 3rd gen iOS 7.1. In the past few hours when using internet(safari or chrome), Netflix, and games some weird things happen.
1. Screen goes black for a few second then returns to lock screen. And/or
2. 'Slide to power off' appears at top of screen along with an X to cancel at bottom of screen and/or
3. Continually get pop up to login to itunes.
All of these things have occurred independently of one another and sometimes they all occur within a matter of seconds.
I have tried: rebooting, logging in to itunes when it think I am not logged in, uninstalling and reinstalling apps, resetting itunes password, and now reading forums.
Suggestions? Feedback? Solutions? Anything would be a great help right now. Thanks!

You rebooted - by which you mean powered off, then powered on?
Then try a reset:
Hold both the Home button and the Power button down for about 10 seconds until the Apple logo appears.
Let go promptly when it appears.
Wait 30 seconds or so for your iPad to restart.
No information or settings will be lost.

Power on-Power off issues with X200

I am having power up and power down issues with my Lenovo X200.
Prior to the immediate problem, I would experience occasional unexpected shutdown of the computer (I would hear a relay click when it happened), and on some occasions when I put it into hibernation, then power it back up later it would not resume, instead, it would restart with a new session of Windows.
About a month ago, it shut down while I was using it. I powered it back on, but it took a long time (nearly a minute) to get the “ThinkPad” initial boot screen, then the screen would be blank for about a minute, then I would get a screen that read, “Intel Management Engine BIOS Extension v 4.0.4.0007” and also “M.E Initializing……” That screen would show for about a minute, then I got another screen reading “Security chip is generating endorsement key pair. Please wait.” That screen would show for about 5 minutes, then it would read, “Generation failed!!!” for about 5 seconds. After that, it would boot to Windows (I am using Windows 7 Professional).
When I would shut it down, either in hibernate mode or full shutdown, after the hard drive icon stopped flashing (indicating it had shut down), the power icon, battery icon would stay on, and the “sleep” icon would flash. I would have to hold the power button down to turn those icons off; if I failed to do that the power would stay on until the battery completely drained.
I read something about the “Security chip is generating endorsement key pair” message so I went into BIOS and changed the security chip from “Active” to “Inactive”. However, when I would start the computer with the chip “inactive”, it would go first to the initial boot screen, then to the “M.E. Initializing” message, then the screen would go blank and remain blank, not ever booting to Windows. So I went back to BIOS and changed the security chip to “Disabled”. With it disabled, it will boot up, but still is very slow booting and I still get that “M.E. Intializing” message for about a minute, and also I still have to hold the power button down to power down the computer after I shut it down (or hibernate) with Windows.
The good news is that, after this started happening, I have not encountered an unexpected shutdown nor has it failed to resume the previous windows session if I hibernate it.
Any suggestions? Thanks in advance for your help.

The difference may be that the G5 iMac bus (where your fire wire plugs into the back) is a powered bus. What this means is the LaCie drive will "sense" the power from the bus and not turn off. The power it gets from the fire wire bus however may (is) not be enough to actually operate it, only leave it on. You still need to the drive into a power outlet.
In the LaCie manual (CD that comes with drive) and the FAQ section of LaCie's web page it states this as well.
What I do is manually turn the drive on when needed (performing back up or for scheduled back up). The LaCie drive should be quiet when not in use as it has no fan.
PS - try SuperDuper for backups, much better (IMHO) than Silverkeeper.

Windows 10 Upgrade Salellite - Resolving battery and power issues

My upgrade seemed to go smoothly until I tried to unplug my laptop and use it with the battery. It shut down even though it shows that I have 100% charge. It was working fine before the upgrade. When I put my model into the site it says that it is not compatible for the upgrade but otherwise everything seems fine so far except that I cant use my battery. Someone I know suggested that I might need to download a driver but I have no idea which one or if that is the problem. I would appreciate some help with this. I have Satellite C875-S7303. Model # PSCBAU-009005. If anyone knows what I can do that would be so great. Thank you!

Try these suggestions:
Resolving battery and power issues
Note that the article hasn't been updated for Windows 10, but the instructions are generally the same.

Problems with printing after upgrading to Win 8.1 and/ or explorer 11

I just upgraded to Win 8.1 and now some things I want to print are not formatted properly. I've updated the drivers and the print doctor doesn't find anything wrong. The issue I see is when trying to print a shipping label, the label components are overlapping. On another computer it is fine and prints fine. Help?

Hi FishingGuy58,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are having some printing issues since you upgraded to Windows 8.1. So I can better assist you, Please respond with the Printer Model number.
How Do I Find My Model Number?
Once I have the information I can better research the issue and with any luck, come up with a resolution to this issue.
Thank you for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Win 10 Upgrade and Power Manangement Issues

Similar Messages

Maybe you are looking for