Win 2008 r2 - unable to add win 8.1 key to vamt
Hi everyone!
I'm not able to add Win 8.1 KMS key to VAMT 2.0.67.0. When i trying to do that i get error: "The product key you entered
is not supported. Check the key and try again. If you have verified that the product key is correct, you may need to update this version of VAMT."
Key is correct. Patch KB2885698 is installed. Should I update VAMT? Any ideas?
Hi,
According to the error code, you should update the version of VAMT.
Similar Messages
-
Windows 2008 R2 - Unable to add additional adm files + error: Objects.reference
I am running a Windows 2008 R2 Terminal server with Zenworks 10 on it. I am
trying to create a windows policy group for it, but when I go to add the MS
office adm files, they never add. If I run gpedit.msc locally, I am able to
add them. Also when I am done editing the policy before the upload I get
the following error:
Objects.reference not set to an instance of an object. at
novell.Zenworks.PolicyHandlers.WindowsGroupPolicyP lural.GPHelper.ExportGPSettings()
I have everything patched, any help would be appreciated.I don't want to go into the "Why's" too much, but these intermittent
issues were seen prior to ZCM 10.3.0
The decision was made to Remove Support for the 64-bit Platform for
modifying GPOs. This was added to the documentation and the ZCC was
supposed to block you. For some reason, the ZCC does not block you but
starting in ZCM 11 it does. So technically there is a bug that it does
not block you.
There are also on-going plans to correct the 64-bit Platform support but
I do not know when that will happen. At this point, I don't think
adding the support back in is planned in any of the minor point updates.
There should not be any reason why editing the GPO on a 32-Bit machine
would not work on a 32-bit machine.
Oddly, it seems to work most of the time from 64-bit Operating Systems.
I have never had an issue with 64-bit Operating systems until I tried it
with ZCM 11 and I was blocked.
This led me to research the issue where I discovered the details above.
Since many ZCM 10.3.x customers may have never had an issue and will not
realize it was not supported until they get to ZCM 11, more calls may
get generated to increase the priority of the issue but at this time I
would not expect a quick addition of 64-bit OS support for editing policies.
On 1/12/2011 3:42 PM, Steve wrote:
> I have tried with IE 32 bit and firefox and it still happens. If I was to
> create a windows group policy for a 32 bit version, do you think I would be
> able to assign it to the 64 bit version? Why don't they support 64 group
> policies?
>
> I appreciate the help.
>
>
>
> "craig wilson"<[email protected]> wrote in message
> news:[email protected].. .
>> I presume the server is running a 64-bit Version of Windows?
>> Make sure you are running a 32-bit Browser and try FireFox if using I.E.
>>
>> Officially modifying GPOs on a 64-bit OS is not supported since these
>> errors are sometimes seen. ZCM 11 actually Proactively prevents the
>> editing of the GPOs on a 64-bit OS via the ZCC.
>>
>> If you have a 32-bit version of the OS you could try that as well as
>> trying to create the GPO on a 32bit Client OS.
>>
>> On 1/12/2011 1:35 PM, Steve wrote:
>>> I am running a Windows 2008 R2 Terminal server with Zenworks 10 on it. I
>>> am
>>> trying to create a windows policy group for it, but when I go to add the
>>> MS
>>> office adm files, they never add. If I run gpedit.msc locally, I am able
>>> to
>>> add them. Also when I am done editing the policy before the upload I get
>>> the following error:
>>>
>>> Objects.reference not set to an instance of an object. at
>>>
>>> novell.Zenworks.PolicyHandlers.WindowsGroupPolicyP lural.GPHelper.ExportGPSettings()
>>>
>>> I have everything patched, any help would be appreciated.
>>>
>>>
>>
>>
>> --
>> Craig Wilson - MCNE, MCSE, CCNA
>> Novell Knowledge Partner
>>
>> Novell does not officially monitor these forums.
>>
>> Suggestions/Opinions/Statements made by me are solely my own.
>> These thoughts may not be shared by either Novell or any rational human.
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human. -
Windows Server 2008 R2: Unable to add a subnet to Site and Services
Hi All,
I'm trying to add a new subnet to Site and Services to allow new server in that specific subnet to access the proper DC.
These are the actual subnet configured:
- 192.168.28.0/22
- 192.168.48.0/22
- 192.168.80.0/22
Now I want to add this subnet: 192.168.90.0/22
Why I cannot confirm this new subnet in the GUI?
ThanksHi,
Becasue the network prefix is improper.
If we use "/22" as the mask, the network prefix should be 192.168.4n.0/22 (n=0,1,2... ...).
Therefore the proper network prefix should be 192.168.88.0/22 or 192.168.92.0/22.
For detailed information about subnetting, please refer to the link below,
http://technet.microsoft.com/en-us/library/cc958834.aspx
Best Regards.
Steven Lee
TechNet Community Support -
Unable to scan and install windows updates on Win 2008 R2 server
I've encountered some of my win 2008 servers are unable to scan and receive windows updates from SCCM 2012. Browse through the logs and found some error code related to
0x80244023. Excerpt from the WindowsUpdate and WUAHandler is as below. Searched the net and found some workaround which is to rename the registry key
WinHTTPSettings to WinHTTPSettingsx (by adding x at the end of the string)
under HKEY_LOCAL_MACHINE -> SOFTWARE -> Microsoft -> Windows -> CurrentVersion -> Internet Settings -> Connections.
I've did just that on the effected servers and after running again the Software Update Scan Cycle action, it is now able to scan and install the updates. My questions is, based on you guys experience, is there any repercussion (apart from enable to install
software updates) that I could encounter in changing the registry key value WinHTTPSettings?
WUAHandler
<![LOG[Scan results will include all superseded updates.]LOG]!><time="04:04:40.982-480" date="09-20-2014" component="WUAHandler" context="" type="1" thread="872" file="cwuahandler.cpp:2913">
<![LOG[Search Criteria is (DeploymentAction=* AND Type='Software') OR (DeploymentAction=* AND Type='Driver')]LOG]!><time="04:04:40.982-480" date="09-20-2014" component="WUAHandler" context="" type="1"
thread="872" file="cwuahandler.cpp:2916">
<![LOG[Async searching of updates using WUAgent started.]LOG]!><time="04:04:40.988-480" date="09-20-2014" component="WUAHandler" context="" type="1" thread="872" file="cwuahandler.cpp:579">
<![LOG[Async searching completed.]LOG]!><time="04:05:06.262-480" date="09-20-2014" component="WUAHandler" context="" type="1" thread="8112" file="cwuahandler.cpp:2068">
<![LOG[OnSearchComplete - Failed to end search job. Error = 0x80244023.]LOG]!><time="04:05:06.263-480" date="09-20-2014" component="WUAHandler" context="" type="3"
thread="872" file="cwuahandler.cpp:3064">
<![LOG[Scan failed with error = 0x80244023.]LOG]!><time="04:05:06.263-480" date="09-20-2014" component="WUAHandler" context="" type="3" thread="872" file="cwuahandler.cpp:3520">
WindowsUpdate
2014-09-20 06:04:03:506 552 634 PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-09-20 06:04:03:506 552 634 PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL =
http://"SCCM Server":8530/ClientWebService/client.asmx
2014-09-20 06:04:25:166 552 634 PT WARNING:
GetConfig failure, error = 0x80244023, soap client error = 10, soap error code = 0, HTTP status code = 504
2014-09-20 06:04:25:166 552 634 PT WARNING:
PTError: 0x80244023
2014-09-20 06:04:25:166 552 634 PT WARNING:
GetConfig_WithRecovery failed: 0x80244023
2014-09-20 06:04:25:166 552 634 PT WARNING: RefreshConfig failed: 0x80244023
2014-09-20 06:04:25:166 552 634 PT WARNING: RefreshPTState failed: 0x80244023
2014-09-20 06:04:25:166 552 634 PT WARNING: Sync of Updates: 0x80244023
2014-09-20 06:04:25:166 552 634 PT WARNING: SyncServerUpdatesInternal failed: 0x80244023
2014-09-20 06:04:25:166 552 634 Agent * WARNING:
Failed to synchronize, error = 0x80244023
2014-09-20 06:04:25:170 552 634 Agent * WARNING: Exit code = 0x80244023
2014-09-20 06:04:25:170 552 634 Agent *********
2014-09-20 06:04:25:170 552 634 Agent ** END ** Agent: Finding updates [CallerId = CcmExec]
2014-09-20 06:04:25:170 552 634 Agent *************
2014-09-20 06:04:25:170 552 634 Agent WARNING:
WU client failed Searching for update with error 0x80244023
2014-09-20 06:04:25:171 5752 de4 COMAPI >>-- RESUMED -- COMAPI: Search [ClientId = CcmExec]
2014-09-20 06:04:25:172 5752 de4 COMAPI - Updates found = 0
2014-09-20 06:04:25:172 5752 de4 COMAPI - WARNING: Exit code = 0x00000000, Result code = 0x80244023
2014-09-20 06:04:25:172 5752 de4 COMAPI ---------
2014-09-20 06:04:25:172 5752 de4 COMAPI -- END -- COMAPI: Search [ClientId = CcmExec]
2014-09-20 06:04:25:172 5752 de4 COMAPI -------------
2014-09-20 06:04:25:172 5752 de4 COMAPI WARNING: Operation failed due to earlier error, hr=80244023
2014-09-20 06:04:25:172 5752 de4 COMAPI FATAL:
Unable to complete asynchronous search. (hr=80244023)
2014-09-20 06:04:30:171 552 634 Report REPORT EVENT: {37DD5321-4FD5-4024-9C84-1FB9C04D4A5A} 2014-09-20 06:04:25:169+0800 1 148 101 {00000000-0000-0000-0000-000000000000} 0 80244023 CcmExec Failure Software
Synchronization Windows Update Client failed to detect with error 0x80244023.Hi
If SCCM is setup correctly and your boundaries are correct then once you deploy updates the agents will pick them up.
Also make sure you SUP role has the FQDN set. Lastly if you are using port 8530 make sure it is open.
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Unable o Find Oracle Weblogic Server setup for Win 2008 Server 64-Bit
Hi
Unable o Find Oracle Weblogic Server setup for Win 2008 Server 64-Bit machine.
Please provide the dowload links.
ThanksPlease follow this link for download and set requirements for installation of WebLogic 10.3 for Win 2008 Server 64bits:
http://download.oracle.com/docs/cd/E13196_01/platform/suppconfigs/configs/windows2008/win2008_103.html
best regards,
Thiago Leôncio -
Problem with installing R12 with Win 2008 (Rapidwiz 12.1.1.9)
I could really use someones help.
I did a download recently of Oracle Financials R12 for windows (I'm using WIN 2008 server) which contained version 12.1.1.9 Rapidwiz. I was unable to get it to work as individual DVD's which is fine, I build the staging area and had better results.
The first error I encountered was the release contained JRE 1.6 but the install referenced 1.5. I took a suggestion that I saw to copy the directory and rename it which worked just fine.
The next error I encountered came during the database install. There was some problem with the database service. It sounds similar to a problem discussed about just the database not related to Oracle Financials but the "fix" to just start the database doesn't seem to apply.
Below is the Rapidwiz log. The warning first mentioned is to check to be sure that the Administrator user being used in the install belongs to the administrator user group which of course it does.
I've brought to the top of the log, the error that I think is occurring. Please help me install, I'm trying to evaluate the software but having trouble with just the install is concerning.
Brought up from log
"runProcess_5"
C:\Users\Administrator\AppData\Local\Temp>REM
C:\Users\Administrator\AppData\Local\Temp>REM Set user to the ORA_DBA group
C:\Users\Administrator\AppData\Local\Temp>REM
C:\Users\Administrator\AppData\Local\Temp>NET LOCALGROUP ORA_DBA /ADD /COMMENT:"Members can connect to the Oracle database as a DBA without a password"
C:\Users\Administrator\AppData\Local\Temp>NET LOCALGROUP ORA_DBA TOBEY\Administrator /ADD
DIM-00019: create service error
O/S-Error: (OS 1388) A new member could not be added to a local group because the member has the wrong account type.
C:\Users\Administrator\AppData\Local\Temp>if 75 == 0 goto :INSTSRV_OK
C:\Users\Administrator\AppData\Local\Temp>echo "Cannot install service for database ORACLE_HOME\n";
"Cannot install service for database ORACLE_HOME\n";
RW-50010: Error: - script has returned an error: 75
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
Rest of log available if it would help. Thanks!Thanks for the starting point.
The user I am using for the install is Administrator and I confirmed using the NET command that Administrator is a member of the Administrators group and the Domain user group.
Result of NET USER ADMINISTRATOR:
C:\StageR12\startCD\Disk1\rapidwiz>net user administrator
User name Administrator
Full Name
Comment Built-in account for administering the computer/dom
ain
User's comment
Country code 000 (System Default)
Account active Yes
Account expires Never
Password last set 5/24/2011 6:31:40 PM
Password expires 7/5/2011 6:31:40 PM
Password changeable 5/25/2011 6:31:40 PM
Password required Yes
User may change password Yes
Workstations allowed All
Logon script
User profile
Home directory
Last logon 6/1/2011 8:23:40 AM
Logon hours allowed All
Local Group Memberships Administrators ora_dba
*WSS_ADMIN_WPG
Global Group memberships Domain Users Schema Admins
Enterprise Admins Domain Admins
*Group Policy Creator
The command completed successfully.
I still get the warning message about the user account but continue as other posts indicate.
Still get get the error.
The Oracle VIS VSS Writer Service service is starting.
The Oracle VIS VSS Writer Service service was started successfully.
Instance created.
DIM-00019: create service error
O/S-Error: (OS 1388) A new member could not be added to a local group because the member has the wrong account type.
C:\Users\Administrator\AppData\Local\Temp>if 75 == 0 goto :INSTSRV_OK
C:\Users\Administrator\AppData\Local\Temp>echo "Cannot install service for database ORACLE_HOME\n";
"Cannot install service for database ORACLE_HOME\n";
RW-50010: Error: - script has returned an error:75
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
instantiate file:
I see that there is a version of Rapidwiz beyond my 12.1.1.9, is this required to get around this?
Is there another cause of this error?
Am I understanding the assignments to administrator correctly? -
ECC 6.0 installed in win 2008 server with db2 9
Dear all.,
I have newly installed sap erp ecc 6.0 in win 2008 server with db2.The installation is successfully finished and system is up and running.
But the issue is i could not find anything in the control centre to take backup and to do other activities.
I tried to add the system in control centre and i tried to run with DB2admin create command.
Please anybody let me know how to get all the systems and all database in control centre in db2.
ERROR returned SQL0104N
best regards.,
Manjunath Gdb2admin create command is for creating the DAS, I guess no need of it here
http://publib.boulder.ibm.com/infocenter/db2luw/v8/index.jsp?topic=/com.ibm.db2.udb.doc/admin/t0004960.htm
On Windows server, start -> run -> db2cmd -> enter
Does it open db2cmd prompt ?
If yes, check these and paste the output here in forum
echo %DB2INSTANCE%
db2ilist
db2 list db directory
'I tried to add the system in control centre'
Ok, I guess you are trying to add the instance. Try the following link for 'Listing available instances' and 'adding additional instances'
http://books.google.co.in/books?id=YiO2oUNtXLQC&pg=PA118&lpg=PA118&dq=db2Listingtheinstancesinyoursystem&source=bl&ots=nvegXvy8du&sig=tnac90moH8XIpMOwiOC2RUx68K8&hl=en&ei=v1zHSvuSBY7o6gP2grGnDQ&sa=X&oi=book_result&ct=result&resnum=1#v=onepage&q=db2%20Listing%20the%20instances%20in%20your%20system&f=false -
ORA-01017 with Managed Provider 4.112.3.60. Bug with ODP on Win 2008 R2?
I'm experiencing some trouble with the manage provider and I can't seem to figure out what's causing the issue.
At first, the Managed Provider seemed to be a drop in replacement for the Unmanaged Provider. However, when we moved some code to our testing environments, the application started failing with a 'Logon Denied' error.
Our dev machines are 64 bit Win 7 and our test machines are Win 2008 R2. The DEV machines do not have any trouble connecting to the database with the identical connection string used in the test environment. I can connect to the database using sql plus with the connection string used in the application.
I'm at a loss on how to trouble shoot this.
Thanks.
JonApp does not run in share drive, runs on operating system D:drive (However, I do access the Win 2008 via Citrix Desktop)
Removed the canned tags created by Visual Studio from app.config which removed the app.config error noted earlier,
recompiled, and ran app from test directory with this app.config and then app failed with this trace file
As reminder:
No installation of Managed Driver, so machine config should be clear of managed driver settings.
Used XCOPY version of .60 beta, keeping the tnsnames.ora and sqlnet.ora copied from server Oracle Client > network > admin folder
along with the three managed driver files in the test application folder.
Not using transactional services.
App is just simple test of managed driver calling list of tables with SELECT table_name FROM all_tab_cols and placing in List
App environment is WPF .NET Classic 4.0
OS is 64-bit Windows 2008R2
Is the SQLNET NAMES.DEFAULT_DOMAIN : (WORLD) supported?
From trace file, looks like YES as I submit the SID MYDB to the connection string builder and Managed Driver adds (as it should) the domain name .WORLD
Also as reminder, this app works just fine with UNMANAGED driver compile in same environment.
+++++++++++++++++++++++++++++
<?xml version="1.0"?>
<configuration>
<configSections>
<section name="oracle.manageddataaccess.client" type="OracleInternal.Common.ODPMSectionHandler,Oracle.ManagedDataAccess" />
</configSections>
<system.data>
<DbProviderFactories>
<remove invariant="Oracle.ManagedDataAccess.Client" />
<add name="ODP.NET,Managed Driver" invariant="Oracle.ManagedDataAccess.Client" description="Oracle Data Provider for .NET, Managed Driver" type="Oracle.ManagedDataAccess.Client.OracleClientFactory,
Oracle.ManagedDataAccess, Version=4.112.3.60, Culture=neutral, PublicKeyToken=89b483f429c47342" />
</DbProviderFactories>
</system.data>
<oracle.manageddataaccess.client>
<version number="*">
<settings>
<setting name="TNS_ADMIN" value="D:\ME\testapp"/>
<setting name="TraceFileLocation" value=" D:\ME\testapp"/>
<setting name="TraceLevel" value="7" />
<setting name="TraceOption" value="1"/>
</settings>
</version>
<version number="4.112.3.60">
<settings></settings>
</version>
</oracle.manageddataaccess.client>
</configuration>
+++++++++++++++++++++++++++++++++++++++++++++
2013-07-22 11:08:32.006660 TID:1 (CFG) (ENV) Machine Name : Win2008Svr
2013-07-22 11:08:32.022285 TID:1 (CFG) (ENV) User Name : ME
2013-07-22 11:08:32.022285 TID:1 (CFG) (ENV) OS Version : Microsoft Windows NT 6.1.7601 Service Pack 1
2013-07-22 11:08:32.022285 TID:1 (CFG) (ENV) 64-bit OS : True
2013-07-22 11:08:32.022285 TID:1 (CFG) (ENV) 64-bit Process : True
2013-07-22 11:08:32.022285 TID:1 (CFG) (ENV) .NET Runtime Version : 4.0.30319.1008
2013-07-22 11:08:32.022285 TID:1 (CFG) (VER) Oracle Data Provider for .NET, Managed Driver Version : 4.112.3.60
2013-07-22 11:08:32.022285 TID:1 (CFG) (.NET) TraceOption : 1
2013-07-22 11:08:32.022285 TID:1 (CFG) (.NET) TraceFileLocation : D:\Me\testapp
2013-07-22 11:08:32.022285 TID:1 (CFG) (.NET) TNS_ADMIN : D:\Me\testapp
2013-07-22 11:08:32.022285 TID:1 (CFG) (.NET) TraceLevel : 7
2013-07-22 11:08:32.037911 TID:1 (CFG) (SQLNET) SQLNET.AUTHENTICATION_SERVICES : (NTS)
2013-07-22 11:08:32.037911 TID:1 (CFG) (SQLNET) NAMES.DEFAULT_DOMAIN : (WORLD)
2013-07-22 11:08:32.037911 TID:1 (CFG) (SQLNET) mydb.world : (DESCRIPTION =(ADDRESS = (PROTOCOL = TCP)(Host = 10.10.10.30)(Port = 1521))(CONNECT_DATA = (SERVICE_NAME = MYDB)))
2013-07-22 11:08:32.037911 TID:1 (PUB) (ENT) OracleConnectionStringBuilder.ctor()
2013-07-22 11:08:32.053536 TID:1 (PUB) (EXT) OracleConnectionStringBuilder.ctor()
2013-07-22 11:08:32.053536 TID:1 (PUB) (ENT) OracleConnectionStringBuilder.TryGetValue()
2013-07-22 11:08:32.069161 TID:1 (PUB) (ENT) OracleConnectionStringBuilder.ContainsKey()
2013-07-22 11:08:32.069161 TID:1 (PUB) (EXT) OracleConnectionStringBuilder.ContainsKey()
2013-07-22 11:08:32.069161 TID:1 (PUB) (EXT) OracleConnectionStringBuilder.TryGetValue()
2013-07-22 11:08:32.069161 TID:1 (PUB) (ENT) OracleConnectionStringBuilder.TryGetValue()
2013-07-22 11:08:32.069161 TID:1 (PUB) (ENT) OracleConnectionStringBuilder.ContainsKey()
2013-07-22 11:08:32.069161 TID:1 (PUB) (EXT) OracleConnectionStringBuilder.ContainsKey()
2013-07-22 11:08:32.069161 TID:1 (PUB) (EXT) OracleConnectionStringBuilder.TryGetValue()
2013-07-22 11:08:32.069161 TID:1 (PUB) (ENT) OracleConnectionStringBuilder.TryGetValue()
2013-07-22 11:08:32.069161 TID:1 (PUB) (ENT) OracleConnectionStringBuilder.ContainsKey()
2013-07-22 11:08:32.069161 TID:1 (PUB) (EXT) OracleConnectionStringBuilder.ContainsKey()
2013-07-22 11:08:32.069161 TID:1 (PUB) (EXT) OracleConnectionStringBuilder.TryGetValue()
2013-07-22 11:08:32.069161 TID:1 (PUB) (ENT) OracleConnectionStringBuilder.TryGetValue()
2013-07-22 11:08:32.069161 TID:1 (PUB) (ENT) OracleConnectionStringBuilder.ContainsKey()
2013-07-22 11:08:32.069161 TID:1 (PUB) (EXT) OracleConnectionStringBuilder.ContainsKey()
2013-07-22 11:08:32.069161 TID:1 (PUB) (EXT) OracleConnectionStringBuilder.TryGetValue()
2013-07-22 11:08:32.069161 TID:1 (PUB) (ENT) OracleConnection.ctor()
2013-07-22 11:08:32.084786 TID:1 (PRI) (CP) (ENT) ConnectionString.GetCS()
2013-07-22 11:08:32.084786 TID:1 (PRI) (CP) (ENT) ConnectionString.ctor()
2013-07-22 11:08:32.100412 TID:1 (PRI) (CP) (ENT) ConnectionString.Parse()
2013-07-22 11:08:32.116037 TID:1 (PRI) (CP) (ENT) ConnectionString.SetProperty()
2013-07-22 11:08:32.116037 TID:1 (PRI) (CP) (EXT) ConnectionString.SetProperty()
2013-07-22 11:08:32.116037 TID:1 (PRI) (CP) (ENT) ConnectionString.SetProperty()
2013-07-22 11:08:32.116037 TID:1 (PRI) (CP) (EXT) ConnectionString.SetProperty()
2013-07-22 11:08:32.116037 TID:1 (PRI) (CP) (ENT) ConnectionString.SetProperty()
2013-07-22 11:08:32.116037 TID:1 (PRI) (CP) (EXT) ConnectionString.SetProperty()
2013-07-22 11:08:32.116037 TID:1 (PRI) (CP) (ENT) ConnectionString.SetProperty()
2013-07-22 11:08:32.116037 TID:1 (PRI) (CP) (EXT) ConnectionString.SetProperty()
2013-07-22 11:08:32.116037 TID:1 (PRI) (CP) (EXT) ConnectionString.Parse()
2013-07-22 11:08:32.116037 TID:1 (PRI) (CP) (EXT) ConnectionString.ctor()
2013-07-22 11:08:32.116037 TID:1 (PRI) (CP) (EXT) ConnectionString.GetCS()
2013-07-22 11:08:32.116037 TID:1 (PUB) (EXT) OracleConnection.ctor()
2013-07-22 11:08:32.116037 TID:1 (PUB) (ENT) OracleCommand.ctor()
2013-07-22 11:08:32.116037 TID:1 (PUB) (EXT) OracleCommand.ctor()
2013-07-22 11:08:32.116037 TID:1 (PRI) (ENT) OracleParameterCollection.ctor()
2013-07-22 11:08:32.116037 TID:1 (PRI) (EXT) OracleParameterCollection.ctor()
2013-07-22 11:08:32.116037 TID:1 (PUB) (ENT) OracleParameterCollection.Clear()
2013-07-22 11:08:32.116037 TID:1 (PUB) (EXT) OracleParameterCollection.Clear()
2013-07-22 11:08:32.116037 TID:1 (PUB) (ENT) OracleParameterCollection.Add()
2013-07-22 11:08:32.116037 TID:1 (PRI) (SVC) (ENT) OracleParameter.ctor()
2013-07-22 11:08:32.116037 TID:1 (PRI) (SVC) (EXT) OracleParameter.ctor()
2013-07-22 11:08:32.116037 TID:1 (PUB) (ENT) OracleParameter.ctor()
2013-07-22 11:08:32.116037 TID:1 (PUB) (EXT) OracleParameter.ctor()
2013-07-22 11:08:32.116037 TID:1 (PUB) (ENT) OracleParameterCollection.Add()
2013-07-22 11:08:32.116037 TID:1 (PUB) (EXT) OracleParameterCollection.Add()
2013-07-22 11:08:32.116037 TID:1 (PUB) (EXT) OracleParameterCollection.Add()
2013-07-22 11:08:32.131662 TID:1 (PUB) (ENT) OracleConnection.Open() (conid=17792110) (state=Closed) (sessid=0) (implid=0) (oper=open)
2013-07-22 11:08:32.131662 TID:1 (PRI) (CP) (ENT) OracleConnectionDispenser`3..cctor()
2013-07-22 11:08:32.131662 TID:1 (PRI) (CP) (EXT) OracleConnectionDispenser`3..cctor()
2013-07-22 11:08:32.131662 TID:1 (PRI) (CP) (ENT) OracleConnectionDispenser`3.Get()
2013-07-22 11:08:32.147288 TID:1 (PRI) (CP) (ENT) PoolManager`3.ctor()
2013-07-22 11:08:32.147288 TID:1 (PRI) (CP) (EXT) PoolManager`3.ctor()
2013-07-22 11:08:32.147288 TID:1 (PRI) (CP) (ENT) PoolManager`3.Initialize() (pmid=18437496) (txnctxid=18437496) (constr=PERSIST SECURITY INFO=True;USER ID=ME;DATA SOURCE=MYDB.WORLD;)
2013-07-22 11:08:32.147288 TID:1 (PRI) (CP) (ENT) ConnectionString.Secure()
2013-07-22 11:08:32.147288 TID:1 (PRI) (CP) (EXT) ConnectionString.Secure()
2013-07-22 11:08:32.147288 TID:1 (PRI) (CP) (EXT) PoolManager`3.Initialize() (pmid=18437496)
2013-07-22 11:08:32.147288 TID:1 (PRI) (BUF) (OBP.CTOR) (poolid:31719739) (OracleConnectionDispenser`3.GetPM)
2013-07-22 11:08:32.162913 TID:1 (PRI) (TUN) Tuning thread started.
2013-07-22 11:08:32.162913 TID:1 (PRI) (TUN) OracleTuningAgent::Register(): Registered pool PERSIST SECURITY INFO=True;USER ID=ME;DATA SOURCE=MYDB.WORLD;PASSWORD=
2013-07-22 11:08:32.162913 TID:1 (PRI) (CP) (ENT) OraclePoolManager.Get()
2013-07-22 11:08:32.178538 TID:1 (PRI) (CP) (ENT) PoolManager`3.Get()
2013-07-22 11:08:32.178538 TID:1 (PRI) (CP) (ENT) PoolManager`3.CreateNewPR()
2013-07-22 11:08:32.194164 TID:1 (PRI) (SVC) (ENT) OracleConnectionImpl.Connect() (oper=connect) (pmid=18437496) (sessid=-1) (implId=19162058) (intxn=False) (app=False) (dtc=False) (put=False)
2013-07-22 11:08:32.194164 TID:1 (PRI) (BUF) (COBP.CTOR) (poolid:1) (parentpoolid:31719739) (OracleConnectionImpl.Connect)
2013-07-22 11:08:32.241039 TID:1 (PRI) (BUF) (ALLOCATION) (bufid:1)
2013-07-22 11:08:32.303541 TID:1 (PRI) (BUF) (ALLOCATION) (bufid:2)
2013-07-22 11:08:32.303541 TID:1 (NET) NS Handshake completed successfully
2013-07-22 11:08:32.303541 TID:1 (NET) Negotiated SDU size = 8192
2013-07-22 11:08:32.319166 TID:1 (PRI) (BUF) (ALLOCATION) (bufid:3)
2013-07-22 11:08:32.319166 TID:1 (PRI) (BUF) (OBP.GET) (poolid:31719739) (key:8192) (bufid:3) (count:0) (ConOraBufPool.Init)
2013-07-22 11:08:32.319166 TID:1 (PRI) (BUF) (COBP.PUT) (poolid:1) (key:8192) (bufid:3) (count:1) (OracleConnectionImpl.Connect)
2013-07-22 11:08:32.319166 TID:1 (PRI) (BUF) (ALLOCATION) (bufid:4)
2013-07-22 11:08:32.319166 TID:1 (PRI) (BUF) (OBP.GET) (poolid:31719739) (key:8192) (bufid:4) (count:0) (ConOraBufPool.Init)
2013-07-22 11:08:32.319166 TID:1 (PRI) (BUF) (COBP.PUT) (poolid:1) (key:8192) (bufid:4) (count:2) (OracleConnectionImpl.Connect)
2013-07-22 11:08:32.319166 TID:1 (PRI) (BUF) (ALLOCATION) (bufid:5)
2013-07-22 11:08:32.319166 TID:1 (PRI) (BUF) (OBP.GET) (poolid:31719739) (key:8192) (bufid:5) (count:0) (ConOraBufPool.Init)
2013-07-22 11:08:32.319166 TID:1 (PRI) (BUF) (COBP.PUT) (poolid:1) (key:8192) (bufid:5) (count:3) (OracleConnectionImpl.Connect)
2013-07-22 11:08:32.319166 TID:1 (PRI) (BUF) (ALLOCATION) (bufid:6)
2013-07-22 11:08:32.319166 TID:1 (PRI) (BUF) (OBP.GET) (poolid:31719739) (key:8192) (bufid:6) (count:0) (ConOraBufPool.Init)
2013-07-22 11:08:32.319166 TID:1 (PRI) (BUF) (COBP.PUT) (poolid:1) (key:8192) (bufid:6) (count:4) (OracleConnectionImpl.Connect)
2013-07-22 11:08:32.319166 TID:1 (PRI) (BUF) (ALLOCATION) (bufid:7)
2013-07-22 11:08:32.319166 TID:1 (PRI) (BUF) (OBP.GET) (poolid:31719739) (key:8192) (bufid:7) (count:0) (ConOraBufPool.Init)
2013-07-22 11:08:32.319166 TID:1 (PRI) (BUF) (COBP.PUT) (poolid:1) (key:8192) (bufid:7) (count:5) (OracleConnectionImpl.Connect)
2013-07-22 11:08:32.319166 TID:1 (PRI) (BUF) (ALLOCATION) (bufid:8)
2013-07-22 11:08:32.319166 TID:1 (PRI) (BUF) (OBP.GET) (poolid:31719739) (key:8192) (bufid:8) (count:0) (ConOraBufPool.Init)
2013-07-22 11:08:32.319166 TID:1 (PRI) (BUF) (COBP.PUT) (poolid:1) (key:8192) (bufid:8) (count:6) (OracleConnectionImpl.Connect)
2013-07-22 11:08:32.319166 TID:1 (PRI) (BUF) (ALLOCATION) (bufid:9)
2013-07-22 11:08:32.319166 TID:1 (PRI) (BUF) (OBP.GET) (poolid:31719739) (key:8192) (bufid:9) (count:0) (ConOraBufPool.Init)
2013-07-22 11:08:32.319166 TID:1 (PRI) (BUF) (COBP.PUT) (poolid:1) (key:8192) (bufid:9) (count:7) (OracleConnectionImpl.Connect)
2013-07-22 11:08:32.319166 TID:1 (PRI) (BUF) (ALLOCATION) (bufid:10)
2013-07-22 11:08:32.319166 TID:1 (PRI) (BUF) (OBP.GET) (poolid:31719739) (key:8192) (bufid:10) (count:0) (ConOraBufPool.Init)
2013-07-22 11:08:32.319166 TID:1 (PRI) (BUF) (COBP.PUT) (poolid:1) (key:8192) (bufid:10) (count:8) (OracleConnectionImpl.Connect)
2013-07-22 11:08:32.319166 TID:1 (PRI) (BUF) (COBP.GET) (poolid:1) (key:8192) (bufid:10) (count:7) (OraBufWriter.Initialize)
2013-07-22 11:08:32.319166 TID:1 (PRI) (SVC) (ENT) OracleConnectionImpl.DoProtocolNegotiation()
2013-07-22 11:08:32.334791 TID:1 (PRI) (TTC) (ENT) TTCProtocolNegotiation.WriteMessage()
2013-07-22 11:08:32.334791 TID:1 (PRI) (TTC) (ENT) TTCMessage.WriteTTCCode()
2013-07-22 11:08:32.334791 TID:1 (PRI) (TTC) (EXT) TTCMessage.WriteTTCCode()
2013-07-22 11:08:32.334791 TID:1 (PRI) (TTC) (EXT) TTCProtocolNegotiation.WriteMessage()
2013-07-22 11:08:32.334791 TID:1 (PRI) (TTC) (ENT) TTCProtocolNegotiation.ReadResponse()
2013-07-22 11:08:32.334791 TID:1 (PRI) (BUF) (COBP.GET) (poolid:1) (key:8192) (bufid:9) (count:6) (OraBufReader.GetDataFromNetwork)
2013-07-22 11:08:32.366042 TID:1 (PRI) (ENT) TTCProtocolNegotiation.ReadResponse()
2013-07-22 11:08:32.366042 TID:1 (PRI) (TTC) (ERR) TTCProtocolNegotiation.ReadResponse() OracleInternal.Network.NetworkException (0x80004005):
ORA-03135: Connection lost contact ---> System.Net.Sockets.SocketException (0x80004005): An existing connection was forcibly closed by the remote host
at OracleInternal.Network.ReaderStream.Read(OraBuf OB)
at OracleInternal.Network.ReaderStream.Read(OraBuf OB)
at OracleInternal.TTC.OraBufReader.GetDataFromNetwork()
at OracleInternal.TTC.OraBufReader.Read(Boolean bIgnoreData)
at OracleInternal.TTC.MarshallingEngine.UnmarshalUB1(Boolean bIgnoreData)
at OracleInternal.TTC.TTCProtocolNegotiation.ReadResponse()
2013-07-22 11:08:32.366042 TID:1 (PRI) (ENT) OracleException.ctor()
2013-07-22 11:08:32.366042 TID:1 (PRI) (ENT) OracleError.ctor()
2013-07-22 11:08:32.366042 TID:1 (PRI) (EXT) OracleError.ctor()
2013-07-22 11:08:32.366042 TID:1 (PRI) (EXT) TTCProtocolNegotiation.ReadResponse()
2013-07-22 11:08:32.366042 TID:1 (PRI) (EXT) TTCProtocolNegotiation.ReadResponse()
2013-07-22 11:08:32.366042 TID:1 (PRI) (TTC) (EXT) TTCProtocolNegotiation.ReadResponse()
2013-07-22 11:08:32.366042 TID:1 (PRI) (ENT) OracleConnectionImpl.DoProtocolNegotiation()
2013-07-22 11:08:32.366042 TID:1 (PRI) (SVC) (ERR) OracleConnectionImpl.DoProtocolNegotiation() Oracle.ManagedDataAccess.Client.OracleException (0x80004005):
ORA-03135: Connection lost contact ---> OracleInternal.Network.NetworkException (0x80004005): ORA-03135: Connection lost contact --->
System.Net.Sockets.SocketException (0x80004005): An existing connection was forcibly closed by the remote host
at OracleInternal.Network.ReaderStream.Read(OraBuf OB)
at OracleInternal.Network.ReaderStream.Read(OraBuf OB)
at OracleInternal.TTC.OraBufReader.GetDataFromNetwork()
at OracleInternal.TTC.OraBufReader.Read(Boolean bIgnoreData)
at OracleInternal.TTC.MarshallingEngine.UnmarshalUB1(Boolean bIgnoreData)
at OracleInternal.TTC.TTCProtocolNegotiation.ReadResponse()
at Oracle.ManagedDataAccess.Client.OracleException.HandleError(OracleTraceLevel level, OracleTraceTag tag, Exception ex)
at OracleInternal.TTC.TTCProtocolNegotiation.ReadResponse()
at OracleInternal.ServiceObjects.OracleConnectionImpl.DoProtocolNegotiation()
2013-07-22 11:08:32.366042 TID:1 (PRI) (EXT) OracleConnectionImpl.DoProtocolNegotiation()
2013-07-22 11:08:32.366042 TID:1 (PRI) (SVC) (EXT) OracleConnectionImpl.DoProtocolNegotiation()
2013-07-22 11:08:32.366042 TID:1 (PRI) (ENT) OracleConnectionImpl.Connect()
2013-07-22 11:08:32.366042 TID:1 (PRI) (SVC) (ERR) OracleConnectionImpl.Connect() Oracle.ManagedDataAccess.Client.OracleException (0x80004005):
ORA-03135: Connection lost contact ---> OracleInternal.Network.NetworkException (0x80004005): ORA-03135: Connection lost contact --->
System.Net.Sockets.SocketException (0x80004005): An existing connection was forcibly closed by the remote host
at OracleInternal.Network.ReaderStream.Read(OraBuf OB)
at OracleInternal.Network.ReaderStream.Read(OraBuf OB)
at OracleInternal.TTC.OraBufReader.GetDataFromNetwork()
at OracleInternal.TTC.OraBufReader.Read(Boolean bIgnoreData)
at OracleInternal.TTC.MarshallingEngine.UnmarshalUB1(Boolean bIgnoreData)
at OracleInternal.TTC.TTCProtocolNegotiation.ReadResponse()
at Oracle.ManagedDataAccess.Client.OracleException.HandleError(OracleTraceLevel level, OracleTraceTag tag, Exception ex)
at OracleInternal.TTC.TTCProtocolNegotiation.ReadResponse()
at OracleInternal.ServiceObjects.OracleConnectionImpl.DoProtocolNegotiation()
at OracleInternal.ServiceObjects.OracleConnectionImpl.Connect(ConnectionString cs, Boolean bOpenEndUserSession)
2013-07-22 11:08:32.366042 TID:1 (PRI) (EXT) OracleConnectionImpl.Connect()
2013-07-22 11:08:32.366042 TID:1 (PRI) (SVC) (EXT) OracleConnectionImpl.Connect() (oper=connect) (pmid=18437496) (sessid=-1) (implId=19162058) (intxn=False) (app=False) (dtc=False) (put=False) (pooling=True)
2013-07-22 11:08:32.366042 TID:1 (PRI) (ENT) PoolManager`3.CreateNewPR()
2013-07-22 11:08:32.366042 TID:1 (PUB) (CP) (ERR) PoolManager`3.CreateNewPR() Oracle.ManagedDataAccess.Client.OracleException (0x80004005):
ORA-03135: Connection lost contact ---> OracleInternal.Network.NetworkException (0x80004005): ORA-03135: Connection lost contact --->
System.Net.Sockets.SocketException (0x80004005): An existing connection was forcibly closed by the remote host
at OracleInternal.Network.ReaderStream.Read(OraBuf OB)
at OracleInternal.Network.ReaderStream.Read(OraBuf OB)
at OracleInternal.TTC.OraBufReader.GetDataFromNetwork()
at OracleInternal.TTC.OraBufReader.Read(Boolean bIgnoreData)
at OracleInternal.TTC.MarshallingEngine.UnmarshalUB1(Boolean bIgnoreData)
at OracleInternal.TTC.TTCProtocolNegotiation.ReadResponse()
at Oracle.ManagedDataAccess.Client.OracleException.HandleError(OracleTraceLevel level, OracleTraceTag tag, Exception ex)
at OracleInternal.TTC.TTCProtocolNegotiation.ReadResponse()
at OracleInternal.ServiceObjects.OracleConnectionImpl.DoProtocolNegotiation()
at OracleInternal.ServiceObjects.OracleConnectionImpl.Connect(ConnectionString cs, Boolean bOpenEndUserSession)
at OracleInternal.ConnectionPool.PoolManager`3.CreateNewPR(Int32 reqCount, Boolean bForPoolPopulation, ConnectionString csWithDiffOrNewPwd)
2013-07-22 11:08:32.366042 TID:1 (PRI) (EXT) PoolManager`3.CreateNewPR()
2013-07-22 11:08:32.366042 TID:1 (PRI) (CP) (EXT) PoolManager`3.CreateNewPR() (pmid=18437496) (total=0)
2013-07-22 11:08:32.366042 TID:1 (PRI) (ENT) PoolManager`3.Get()
2013-07-22 11:08:32.366042 TID:1 (PUB) (CP) (ERR) PoolManager`3.Get() Oracle.ManagedDataAccess.Client.OracleException (0x80004005):
ORA-03135: Connection lost contact ---> OracleInternal.Network.NetworkException (0x80004005): ORA-03135: Connection lost contact --->
System.Net.Sockets.SocketException (0x80004005): An existing connection was forcibly closed by the remote host
at OracleInternal.Network.ReaderStream.Read(OraBuf OB)
at OracleInternal.Network.ReaderStream.Read(OraBuf OB)
at OracleInternal.TTC.OraBufReader.GetDataFromNetwork()
at OracleInternal.TTC.OraBufReader.Read(Boolean bIgnoreData)
at OracleInternal.TTC.MarshallingEngine.UnmarshalUB1(Boolean bIgnoreData)
at OracleInternal.TTC.TTCProtocolNegotiation.ReadResponse()
at Oracle.ManagedDataAccess.Client.OracleException.HandleError(OracleTraceLevel level, OracleTraceTag tag, Exception ex)
at OracleInternal.TTC.TTCProtocolNegotiation.ReadResponse()
at OracleInternal.ServiceObjects.OracleConnectionImpl.DoProtocolNegotiation()
at OracleInternal.ServiceObjects.OracleConnectionImpl.Connect(ConnectionString cs, Boolean bOpenEndUserSession)
at OracleInternal.ConnectionPool.PoolManager`3.CreateNewPR(Int32 reqCount, Boolean bForPoolPopulation, ConnectionString csWithDiffOrNewPwd)
at OracleInternal.ConnectionPool.PoolManager`3.Get(ConnectionString csWithDiffOrNewPwd)
2013-07-22 11:08:32.366042 TID:1 (PRI) (EXT) PoolManager`3.Get()
2013-07-22 11:08:32.366042 TID:1 (PRI) (CP) (EXT) PoolManager`3.Get()
2013-07-22 11:08:32.366042 TID:1 (PRI) (ENT) OraclePoolManager.Get()
2013-07-22 11:08:32.366042 TID:1 (PUB) (CP) (ERR) OraclePoolManager.Get() Oracle.ManagedDataAccess.Client.OracleException (0x80004005):
ORA-03135: Connection lost contact ---> OracleInternal.Network.NetworkException (0x80004005): ORA-03135: Connection lost contact --->
System.Net.Sockets.SocketException (0x80004005): An existing connection was forcibly closed by the remote host
at OracleInternal.Network.ReaderStream.Read(OraBuf OB)
at OracleInternal.Network.ReaderStream.Read(OraBuf OB)
at OracleInternal.TTC.OraBufReader.GetDataFromNetwork()
at OracleInternal.TTC.OraBufReader.Read(Boolean bIgnoreData)
at OracleInternal.TTC.MarshallingEngine.UnmarshalUB1(Boolean bIgnoreData)
at OracleInternal.TTC.TTCProtocolNegotiation.ReadResponse()
at Oracle.ManagedDataAccess.Client.OracleException.HandleError(OracleTraceLevel level, OracleTraceTag tag, Exception ex)
at OracleInternal.TTC.TTCProtocolNegotiation.ReadResponse()
at OracleInternal.ServiceObjects.OracleConnectionImpl.DoProtocolNegotiation()
at OracleInternal.ServiceObjects.OracleConnectionImpl.Connect(ConnectionString cs, Boolean bOpenEndUserSession)
at OracleInternal.ConnectionPool.PoolManager`3.CreateNewPR(Int32 reqCount, Boolean bForPoolPopulation, ConnectionString csWithDiffOrNewPwd)
at OracleInternal.ConnectionPool.PoolManager`3.Get(ConnectionString csWithDiffOrNewPwd)
at OracleInternal.ConnectionPool.OraclePoolManager.Get(ConnectionString csWithNewPassword)
2013-07-22 11:08:32.366042 TID:1 (PRI) (EXT) OraclePoolManager.Get()
2013-07-22 11:08:32.366042 TID:1 (PRI) (CP) (EXT) OraclePoolManager.Get() (pmid=18437496)
2013-07-22 11:08:32.366042 TID:1 (PRI) (ENT) OracleConnectionDispenser`3.Get()
2013-07-22 11:08:32.381667 TID:1 (PUB) (CP) (ERR) OracleConnectionDispenser`3.Get() Oracle.ManagedDataAccess.Client.OracleException (0x80004005):
ORA-03135: Connection lost contact ---> OracleInternal.Network.NetworkException (0x80004005): ORA-03135:
Connection lost contact ---> System.Net.Sockets.SocketException (0x80004005): An existing connection was forcibly closed by the remote host
at OracleInternal.Network.ReaderStream.Read(OraBuf OB)
at OracleInternal.Network.ReaderStream.Read(OraBuf OB)
at OracleInternal.TTC.OraBufReader.GetDataFromNetwork()
at OracleInternal.TTC.OraBufReader.Read(Boolean bIgnoreData)
at OracleInternal.TTC.MarshallingEngine.UnmarshalUB1(Boolean bIgnoreData)
at OracleInternal.TTC.TTCProtocolNegotiation.ReadResponse()
at Oracle.ManagedDataAccess.Client.OracleException.HandleError(OracleTraceLevel level, OracleTraceTag tag, Exception ex)
at OracleInternal.TTC.TTCProtocolNegotiation.ReadResponse()
at OracleInternal.ServiceObjects.OracleConnectionImpl.DoProtocolNegotiation()
at OracleInternal.ServiceObjects.OracleConnectionImpl.Connect(ConnectionString cs, Boolean bOpenEndUserSession)
at OracleInternal.ConnectionPool.PoolManager`3.CreateNewPR(Int32 reqCount, Boolean bForPoolPopulation, ConnectionString csWithDiffOrNewPwd)
at OracleInternal.ConnectionPool.PoolManager`3.Get(ConnectionString csWithDiffOrNewPwd)
at OracleInternal.ConnectionPool.OraclePoolManager.Get(ConnectionString csWithNewPassword)
at OracleInternal.ConnectionPool.OracleConnectionDispenser`3.Get(ConnectionString cs, PM conPM, ConnectionString pmCS, SecureString securedPassword, SecureString securedProxyPassword)
2013-07-22 11:08:32.381667 TID:1 (PRI) (EXT) OracleConnectionDispenser`3.Get()
2013-07-22 11:08:32.381667 TID:1 (PRI) (CP) (EXT) OracleConnectionDispenser`3.Get()
2013-07-22 11:08:32.381667 TID:1 (PRI) (ENT) OracleConnection.Open()
2013-07-22 11:08:32.381667 TID:1 (PUB) (ERR) OracleConnection.Open() Oracle.ManagedDataAccess.Client.OracleException (0x80004005):
ORA-03135: Connection lost contact ---> OracleInternal.Network.NetworkException (0x80004005):
ORA-03135: Connection lost contact ---> System.Net.Sockets.SocketException (0x80004005): An existing connection was forcibly closed by the remote host
at OracleInternal.Network.ReaderStream.Read(OraBuf OB)
at OracleInternal.Network.ReaderStream.Read(OraBuf OB)
at OracleInternal.TTC.OraBufReader.GetDataFromNetwork()
at OracleInternal.TTC.OraBufReader.Read(Boolean bIgnoreData)
at OracleInternal.TTC.MarshallingEngine.UnmarshalUB1(Boolean bIgnoreData)
at OracleInternal.TTC.TTCProtocolNegotiation.ReadResponse()
at Oracle.ManagedDataAccess.Client.OracleException.HandleError(OracleTraceLevel level, OracleTraceTag tag, Exception ex)
at OracleInternal.TTC.TTCProtocolNegotiation.ReadResponse()
at OracleInternal.ServiceObjects.OracleConnectionImpl.DoProtocolNegotiation()
at OracleInternal.ServiceObjects.OracleConnectionImpl.Connect(ConnectionString cs, Boolean bOpenEndUserSession)
at OracleInternal.ConnectionPool.PoolManager`3.CreateNewPR(Int32 reqCount, Boolean bForPoolPopulation, ConnectionString csWithDiffOrNewPwd)
at OracleInternal.ConnectionPool.PoolManager`3.Get(ConnectionString csWithDiffOrNewPwd)
at OracleInternal.ConnectionPool.OraclePoolManager.Get(ConnectionString csWithNewPassword)
at OracleInternal.ConnectionPool.OracleConnectionDispenser`3.Get(ConnectionString cs, PM conPM, ConnectionString pmCS, SecureString securedPassword, SecureString securedProxyPassword)
at Oracle.ManagedDataAccess.Client.OracleConnection.Open()
2013-07-22 11:08:32.381667 TID:1 (PRI) (EXT) OracleConnection.Open()
2013-07-22 11:08:32.381667 TID:1 (PUB) (EXT) OracleConnection.Open() (conid=17792110) (state=Closed) (sessid=0) (implid=0) (oper=open)
2013-07-22 11:08:32.381667 TID:1 (PUB) (ENT) OracleCommand.Dispose()
2013-07-22 11:08:32.381667 TID:1 (PUB) (EXT) OracleCommand.Dispose()
2013-07-22 11:08:32.381667 TID:1 (PUB) (ENT) OracleConnection.Dispose()
2013-07-22 11:08:32.381667 TID:1 (PUB) (EXT) OracleConnection.Dispose() -
HowtO - Upgrade 10gR1 WIN 2003 ent(non-asm) to 11gR2 WIN 2008 ent(non-asm)
I did this on VMWare:
Two servers:
Two servers - old ; new
Steps
old - oracle 10g ; win 2003 enter
- 3 databases (rman catalog ; production ; testing)
1.installed 11g r2 - different home (software ONLY)
2.cold backups - 10g db
3.upgraded them to 11g r2 (minor issues, easily corrected)
4.cold backups - 11g db
5.using Oracle toad get script database structure - tablespaces ONLY - 11g db
new
6.win 2008 enter
7.installed oracle grid (later for conversion from non-asm to asm)
8.installed 11g software ONLY
9.created disks (for later use for ASM)
10.Created three blank databases
11.Created similar folder structure as 11g db in 'old' server
12.Created similar tablespaces/datafiles in blank databases as source database.
13.cold backup of three databases - quick backup and recovery
14.Copied datafiles and log files over from 'old' server to 'new' server.
15.Using VBScripts, cloned each database from old server (11g db version) cold backups.
Notes
A.Should mention, I tried export/import option (various options) - tons of errors ! Gave up....
B.Above approach is time-consuming, not quick...
Warnings:
1.Tried installing Oracle SQL Developer plus Toad will not work/or install on x64 bit OS. Developer does
not work, due to Java. (Large number of hits on this).(hit and miss affair - you may get it to work or not..)
2.So I used 'old' server, toad tool, to query database at new server
RMAN Side.
1.Errors occur when you log onto RMAN FIRST TIME.
http://seilerwerks.wordpress.com/2007/03/06/fixing-a-32-to-64-bit-migration-with-utlirpsql/
Hope this helps others....
Ref:
http://download.oracle.com/docs/html/B13831_01/ap_64bit.htm#CHDCDAGEHi there
Good idea but what I find, is I usually come to this site for knowledge...or I google it.
The way I see it, if somone has upgrade issue (similar to this), this is place to add a thread... -
Two WLC to the same NPS Radius (win 2008)
Hi everyone :
I have a WLC 2504 running with one SSID (authentication 802.1X to NPS radius win 2008 Server) , I have another branch with another WLC 2504.
Can I have configure the same SSID with the same NPS radiud win 2008 server in this another WLC 2504?? and How could I do it?
Regards,
Claudio L.Hi Scoott,
Thank you so much for your response.
I have used this guide to configure this deployment :
http://www.cisco.com/en/US/products/ps10315/products_configuration_example09186a0080bfb19a.shtml
In win 2008 server , I just only add the WLC like a new Radius Client ?
I mean ,
Frienly Name : WLC2
Address IP : 192.168.1.X
Vendor : Radius Standard
Share secret : xxxx
And That´s all, right ? -
Register-ScheduledJob for Win 2008 R2
Hi
I am trying to setup a task using PowerShell on my Win 2008 R2 server using this command (I have the v3 powershell installed);
# Add a job option
$JobOption = New-ScheduledJobOption
# Add a trigger
$Time = New-JobTrigger -AtLogOn
# Register the job
Register-ScheduledJob -Name "Reboot 1" -Trigger $Time -FilePath "C:\Users\setup\Desktop\Script.bat" -ScheduledJobOption $JobOption
And get this error;
Register-ScheduledJob : Only Windows PowerShell script files are allowed for FilePath parameter. Specify a file with .ps1 extension.
Any idea how I can use a bat file?? I cannot figure it out, searched on web but no joy :(Hi Tibsy80,
Thanks for your posting.
Based on my research, the FilePath in Register-ScheduledJob is only applied to .ps1 file. And the cmdlet Register-ScheduledTask can schedule a batch file in powershell, However, this cmdlet can be used in windows server 2012 and later.
It seems the schtasks.exe is an available choice to schedule a batch task in windows server 2008r2.
I hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
BO XI 3.1 Installation in Win 2008 R2. CMC & Infoview not opening
I did a BO XI 3.1 SP3 Installation on Win 2008 R2 machine. The Installation was successful. I could connect to the CMS from Client Components (Rich Client, UD, etc.,).
But CMC & Infoview are not opening... I mean the page shows blank without promoting for BO Login Credentials. I'm thinking the problem could be around Tomcat Configuration / something... The system doesnot have IIS. Tomcat version is 5.5.
Any help would be appreciated.
Thanks & Regards,
Madhuhi there....
i am installing bo edge with data integrater xi3.1 sp3 on my windows server 2008 standard 32 bit edition. after installing, the application like infoview, designer all can work but my data services cannot work. Why is this happening? I already also disable the UAC control setting for the windows server 2008. The error says that "businessObject Data Services service manager has stop working." Log Name: Application
Source: Application Error
Date: 20/12/2010 1:48:11 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: WIN-DC9EBRXZAMW
Description:
Faulting application al_jobservice.exe, version 0.0.0.0, time stamp 0x4924d7fe, faulting module al_jobservice.exe, version 0.0.0.0, time stamp 0x4924d7fe, exception code 0xc0000005, fault offset 0x00017fde, process id 0xe14, application start time 0x01cba0097ca93ac6.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-12-20T05:48:11.000Z" />
<EventRecordID>3572</EventRecordID>
<Channel>Application</Channel>
<Computer>WIN-DC9EBRXZAMW</Computer>
<Security />
</System>
<EventData>
<Data>al_jobservice.exe</Data>
<Data>0.0.0.0</Data>
<Data>4924d7fe</Data>
<Data>al_jobservice.exe</Data>
<Data>0.0.0.0</Data>
<Data>4924d7fe</Data>
<Data>c0000005</Data>
<Data>00017fde</Data>
<Data>e14</Data>
<Data>01cba0097ca93ac6</Data>
</EventData>
</Event>
>anyone face this error before and how to solve this issue? Need help ASAP because need to configure it to customer.
Regards,
Teerin -
Unable to instal Win 8 on iMac with Bootcamp & Win 7. Help please.
Unable to install windows 8 on my imac with boot camp running Win 7. Instal gets reset to windows 7 with error message "unable to instal Win 8"
V
You need to go to the computer maker and get a copy of the OEM for your system. YOu cannot download a non OEM and repair "it" with the OEM CD'S. The cd's are probably for repair not install. Does your system have a restore partition?
Wanikiya and Dyami--Team Zigzag -
LMS 3.2 on Win 2008 Server - Web Server Issue
Hi,
I just installed LMS 3.2 on Windows 2008 Server Standart X64 and the CiscoWorks Web Server service does not start (Apache service is down but Tomcat up).
All other services seem to be correctly started even if this is quit long.
When I try to manually start the Apache Service with "pdexec Apache", i got :
ERROR:Get reply from server failed:
ERROR: Daemon Manager startup in progress. Please wait.
When the deamon is up, the second line disapeared but apache is still not responding and of course, the URL is unreachable.
This is a HP Proliant Server with 12Go RAM, is there a maximal size for the paging file ?
I did not modify TMP and TEMP variable, should I have done it before the installation ?
it appears to be some service startup issue on win 2008, is there bug fix or work around ?
pdshow attached
Thanks for your help, this is quit urgent.
Cedric.>>> is there a maximal size for the paging file ?
There's indeed a swap file issue with Win 2008. See the first reply in this thread for corrective action: https://supportforums.cisco.com/message/675893#675891
Though it may not apply, because you've installed LMS 3.2 ok, since you seem to be aware of it, the TMP/TEMP variables do need to be shortened, as noted in this post: https://supportforums.cisco.com/message/677383#677383
Is your Win 2008 Server running any Microsoft Service Packs? Because AFAIK Win 2008 SP2 is not yet supported, and no one seems to have any luck on it with LMS 3.2 yet.
After LMS 3.2 is up and running, if you can't log in to the web GUI, you might be running into the CSCtb17186 bug, described in this post: https://supportforums.cisco.com/message/676256#676256 -
Crytal Viewer for Win 2008 64-bit OS
Hello Folks,
I am not sure if it is the right forum to ask my question as there are zillions of orums and I can't find where to look for Crystal Viewer Help.
My Question is that I am wondering if there is a viewer available for 64-bit OS as we been using npviewer.exe for the past 6-7 years without any problem and now I have new Terminal Server which has 64-bit Win 2008 R2 and npviewer does not work.
I also have a Viewer for 2008 but I think that is 32-bit too while I do see many many discussions about 64-bit but can't find any clue about what is the outcome. Do we have and don't.
Please helpThanks for your quick reply.
yes, I can use 32 bit and I have tried both ( new and old viewer) but my application does not work and I am not able to run my report in IE which is 64 bit while the this viewer is 32 bit and I also can not change my IE 64 to IE 32 to run ( at runtime) as this report gets generated in my ERP using Anyview and then gets fired up IE suing Crystal ActiveX Viewer..
Maybe you are looking for
-
Merging two records in a single record for the same matnr,werks and bwart.
Hi I have a requirement to merge two records into one single record using the quantity field from MSEG table. I am selecting two records from the table MSEG. Now for these two records i have to add the quantity values into one variable. Then there sh
-
Hello sir, i am using macbook pro last 6 month back few months back i install windows7 in my mac every thing is work very fine, only one problem is there that i am unable to access the web cam ,please can u help me.
-
I am using Director 8 and I am trying to figure out how to label a frame. I already know how to create markers, but I can not find how to makers. I am creating a electronic report and I want to have auto numbering. I have markers 1 thru 50 with three
-
I have two iPhones, a 4 and i just bought the 5. my iCloud storage of the 4 is full and i have the biggest storage. now i want to back up my new iphone 5 in the same icloud of the 4. i have no space. can i set up a new account even if i share laptops
-
Should I be worried about my iphone's battery life?
I went to sleep when my iphone's battery was on 60% and I woke up with it on 9%. I left the wifi on, but I still think the battery dropped too much in just a few hours without me even using the phone. Is it normal or should I be worried?