Win 2008R2 terminal services, it won't show Windows 8.1 pro redirected printer

I have users that use a remote app on a Win2008R2 server. Redirected printers work fine on Windows 7, but I cannot get it to display the redirected printer attached to a Windows 8.1 client. I have installed the printer driver on the server as usual. It shows
on Windows 7, just not Windows 8. Ideas anyone?

Hi,
Are you using RD Easy print service for your environment?
Check whether there is proper printer driver is installed. Please check the GPO setting whether the below policy is not enabled.
Computer Configuration> Administrative Templates> Windows Components> Remote Desktop Services>Remote Desktop Session Host
Do not allow client printer redirection: It must set to
Disable
Apart you can also check beneath article for information.
Terminal Server and Printer Redirection
http://blogs.technet.com/b/askperf/archive/2007/08/24/terminal-server-and-printer-redirection.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Mission control won't show windows properly.

Mission control (expose) won't show windows properly. It's really annoying when I'm working and need to see what I've got opened or switch between apps. Sometimes it'll display them correctly, other times it won't. See the 2 screenshots open 3 windows:
1st screenshot: http://cl.ly/image/0U0q1N3J0Z2f
- chrome browser
- finder
- messages
2nd screenshot:http://cl.ly/image/2F0T3o1z0e3Z
only icons of chrome and finder are shown, but no windows. No messages not even the icon.
I'd really love all the help you can provide.

My problem started when the update to 10.7.5 ran. Mission Control in the Dock continued to work as before the update.
In System Settings>Mouse, the side buttons on my Might Mouse had been changed to 'Expose - App Windows.' I had to change the setting back to Mission Control.
Perhaps MtnLion suffered a similar glitch.

ORARRP with Win 2000 Terminal Services debug file

Hi,
I got no replies to my post of Dec 1 about ORARRP (1.3.4) directing output to a file instead of the virtual printer on Windows 2000 terminal services.
Here is the debug file(orarrp.dbg) when a file named TS007 is written.
Any help would be appreciated.
Thanks,
Dave Ball
ORARRP: Full Command Line: "C:\Program Files\orarrp\orarrp.exe" "U:\orarrp_stuff\orarrp_tst.rrpt"
ORARRP: Home Directory: C:\Program Files\orarrp
ORARRP: INI File: C:\Program Files\orarrp\orarrp.ini
ORARRP: Printing...
ORARRP: Type=Text
ORARRP: Direct Print to Printer
ORARRP: Printer DeviceName = HP LaserJet 4L/NEO-630532/Session 12
ORARRP: Printer Port = TS007
ORARRP: Printer Target = HP LaserJet 4L/NEO-630532/Session 12, Printer Count = 1
ORARRP: Enumerating printers:Printer = HP LaserJet 4L/NEO-630532/Session 12 Server = (null)
ORARRP: Enumerating printers: Match = HP LaserJet 4L/NEO-630532/Session 12, Sharename =
ORARRP: Local Printer attached to TS007
ORARRP: Selected Printer = TS007 (HP LaserJet 4L/NEO-630532/Session 12)
ORARRP: Selected Printer Port = TS007, Driver = HP LaserJet 4L
ORARRP: PrintDlg Returned TS007
ORARRP: Printing Direct
ORARRP: Printer Opened
ORARRP: Doc Opened
ORARRP: Printed 486 Bytes
ORARRP: Doc Closed
ORARRP: Sending Extra FormFeed
ORARRP: Printer Closed
ORARRP: ** Debug Finished **

I am using Tomcat 5.0.27 and it is working perfectly. perhaps check the stdout.log to see what errors are thrown while starting the tomcat. Check the port also

ORARRP with Win 2000 Terminal Services

Hi,
We find that ORARRP (1.3.4) directs output to a file instead of the virtual printer on Windows 2000 terminal services. The print dialog comes up OK, we select a virtual printer (not LPT1 or a network printer share), and a file named TS001 is written. If we turn debug on, nothing is written to orarrp.dbg. The normal print dialog in Notepad, Word, etc. works OK.
Is there any way to direct report output to Windows 2000 Terminal Services virtual printers?
Thanks,
Dave Ball
Oak Ridge, TN

I am using Tomcat 5.0.27 and it is working perfectly. perhaps check the stdout.log to see what errors are thrown while starting the tomcat. Check the port also

IPhoto suddenly won't show windows anymore, help, anyone?

Since I've been using Lion I expierence all kinds of problems. I regret updating ever since.
For example, my internet connection keep turning of every couple of minutes (while all other divices at home stay connected). My solution is to turn my wifi off, wait a while and than turn it on again. It's really poor when one uses the best iMac there is. But I guess that's Lion. I got used to it.
But my question:
iPhoto suddenly stopped working (at first it did work!). It does start, but it won't show any windows.
I've deleted the cache, restarted my iMac, no result.
It all began when I plugged in my iPhone.
Now I'm no longer able to backup my photo's anymore.
Can anyone help?
I've also tried cicking the icon while pressing alt and cmd, for more options, but it doesn't work...
Hopefully one of you know the solution!
Thx!
A.

Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

Develop Edits made with LR 4.3 won't show up in ACDSee Pro 5

I use lightroom 4.3 to edit my CR2 files and ACDSee Pro 5 to catalog and sort my huge photo collection and I would love to use it for the CR2 images too.
The problem is, that the develop edits that I make to the CR2 files using LR , won't dispay in ACDSee .. all I can see there are the original cr2 files without the edits made to them. I just had a chat with the adobe support team and they say Lightroom is working perfectly, because the changes show up in Bridge and LR. And the people from ACDSee say that the lightroom edits are Adobe specific.
I thought that an XMP file is there for that purpose : to be able to see the info in other programs. By the way : CR2 files and the XMP are stored in the same location, so that can't be the problem.
Is anyone having this problem too? Or can anybody help me with this please.
If this issue can't be solved, then I will use Bridge or LR as catalog, and maybe I will like it even more, but for now I would like to use ACDSEE.
Thanks in advance for the help.
Marina

myhrmar wrote:
I just had a chat with the adobe support team and they say Lightroom is working perfectly, because the changes show up in Bridge and LR. And the people from ACDSee say that the lightroom edits are Adobe specific.
Correct. That's proprietary processing with the LR engine which has yet to be done (rendered and exported). The preview in those Adobe app's understand this and show you the edits but ACDC can't. You have to render an iteration as a TIFF or similar with the edits applied for another app to 'see' that. ACDC has not access to those preivews so it doesn't show you what will be applied upon export.

Since I updated to Mountain Lion I can't print to my Epson NX430 from my Mac. Though it prints fine from my iPad. Suggestions? I have already uninstalled and reinstalled software. It won't show up on my list of printer options.

My printer is showing no errors and printed fine from my iPad, but it will not connect wirelessly to my mac mini. When I would try to print the printer status would remain at "idle" and the print queue would give an error message saying no printer was connected to the network. I searched for a driver update and couldn't find one so I decided to uninstall the software and then reinstall. I have done this and now the printer will not show up on the list where it should be to even install it durint set up. What can I do to resolve this issue?

add the printer IP without the HTTP
"192.168.1.x:"

Chapter markers won't show in dvd studio pro

I exported my file as a quicktime movie with dvd chapters in fcp. I checked the quicktime file and i can see all the chapter markers. I compressed it using compressor and then imported to DVDsp 4 as i usually do (my hard drive died and i recently reinstalled everything). I droped it in the menu using "create button and chapter indexes". I chose an apple template. I only get one chapter. what happened to my other ones?
I tried also as a test importing the uncompressed final cut file that has the chapters and repeated the above procedure, and still i only got one chapter?
I use to do this all the time, what am i doing wrong?

Compressor should pass along the informations. Did you remember to specify each marker in FCP to be chapter markers. If so, try importing your reference file directly into DVDSP and dropping it into a track. The chapter markers should appear. You can them simply delete out the reference video and replace it with your final encoded MPEG 2.

Bootpicker Won't Boot Windows on MacBook Pro

+We use bootpicker on iMacs, MacBooks, Minis and haven't had any problems until now. Suddenly the late 2008 MacBook Pro won't boot into Windows from bootpicker.+
+It's exactly the same problem described in this archived post that I've quoted below. Same log message as well.+
+Anyone found a solution for this?+
*Bootpicker doesn't reboot automatically on Windows selection*
Posted: Oct 17, 2008 3:00 PM
Hi all! Yesterday I installed Bootpicker (2.1.2) which now is provided by Apple (http://www.apple.com/education/it/bootpicker/) to select between Mac OS X 10.5 and Windows (Boot Camp).
It works fine except following: The Bootpicker menu is displayed after loading Mac OS X directly before Mac OS's login dialog. When I pick Mac OS the Mac OS login dialog is displayed - fine. When I select Windows, also the Mac OS login dialog is displayed. I had expected that in this case Bootpicker will automatically reboot the machine to start up from the Windows partition. Instead I have to manually select the reboot button in the login dialog.
I think there is something wrong. The /Library/Logs/bp.log says following:
17:55:43 BootPicker: Initiating.
17:55:44 BootPicker: Configuring interface for Windows volume/device: /dev/disk0s3
17:55:46 BootPicker: User chose Windows.
17:55:46 BootPicker: Bless args: (
"--device",
"/dev/disk0s3",
"--setBoot",
"--legacy",
"--nextonly"
17:55:47 BootPicker: Flagging slice 3
fdisk: could not open MBR file /usr/standalone/i386/boot0: No such file or directory
Enter 'help' for information
fdisk: 1> Partition 3 marked active.
fdisk:*1> Device could not be accessed exclusively.
A reboot will be needed for changes to take effect. OK? [n] Writing MBR at offset 0.
fdisk: 1> 17:55:47 BootPicker: Terminating.
May be the unsuccessful configuration of the MBR causes the failure? Any other experiences or suggestions?

I think that the issue might be that there is no boot0 in /usr/standalone/i386. I have had similar issues lately when trying to make a bootable usb memory. I think this is necessary for the legacy option in the bless utility. If some one have a solution for this I would like to know as well.

PC Settings won't launch Windows 8.1 Pro

This happens only my user account. I open PC Settings and the Splash screen shows then minimizes itself and nothing happens.
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.
I tried this command
C:\WINDOWS\system32>powershell -ExecutionPolicy Unrestricted Add-AppxPackage -Di
sableDevelopmentMode -Register $Env:SystemRoot\ImmersiveControlPanel\AppxManifes
t.xml
And got this result:
Add-AppxPackage : Deployment failed with HRESULT: 0x80073CFE, The package
repository is corrupted.
error -528: Windows cannot process a deployment operation because the package
repository database encountered an ESENT error. Use the Reset Your PC feature
to recover your PC. See the Application event log for messages with ESENT as
the event source for more details.
NOTE: For additional information, look for [ActivityId]
ecbaddd4-43d8-0000-0be2-baecd843d001 in the Event Log or use the command line
Get-AppxLog -ActivityID ecbaddd4-43d8-0000-0be2-baecd843d001
At line:1 char:1
+ Add-AppxPackage -DisableDevelopmentMode -Register
$Env:SystemRoot\ImmersiveContr ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
    + CategoryInfo          : NotSpecified: (C:\WINDOWS\Imme...ppxManifest.xml
   :String) [Add-AppxPackage], Exception
    + FullyQualifiedErrorId : DeploymentError,Microsoft.Windows.Appx.PackageMa
   nager.Commands.AddAppxPackageCommand
C:\WINDOWS\system32>

Update... the restore failed.
                            mounted images.
WIM COMMANDS:
/Capture-CustomImage    - Captures customizations into a delta WIM file on a
                            WIMBoot system. Captured directories include all
                            subfolders and data.
/Get-WIMBootEntry       - Displays WIMBoot configuration entries for the speci
fied disk volume.
/Update-WIMBootEntry    - Updates WIMBoot configuration entry for the specifie
d disk volume.
/List-Image             - Displays a list of the files and folders in a
                            specified image.
/Delete-Image           - Deletes the specified volume image from a WIM file
                            that has multiple volume images.
/Split-Image            - Splits an existing .wim file into multiple
                            read-only split WIM (SWM) files.
/Export-Image           - Exports a copy of the specified image to another
                            file.
/Append-Image           - Adds another image to a WIM file.
/Capture-Image          - Captures an image of a drive into a new WIM file.
                            Captured directories include all subfolders and
                            data.
/Apply-Image            - Applies an image.
/Get-MountedWimInfo     - Displays information about mounted WIM images.
/Get-WimInfo            - Displays information about images in a WIM file.
/Commit-Wim             - Saves changes to a mounted WIM image.
/Unmount-Wim            - Unmounts a mounted WIM image.
/Mount-Wim              - Mounts an image from a WIM file.
/Remount-Wim            - Recovers an orphaned WIM mount directory.
/Cleanup-Wim            - Deletes resources associated with mounted WIM
                            images that are corrupted.
IMAGE SPECIFICATIONS:
/Online                 - Targets the running operating system.
/Image                  - Specifies the path to the root directory of an
                            offline Windows image.
DISM OPTIONS:
/English                - Displays command line output in English.
/Format                 - Specifies the report output format.
/WinDir                 - Specifies the path to the Windows directory.
/SysDriveDir            - Specifies the path to the system-loader file named
                            BootMgr.
/LogPath                - Specifies the logfile path.
/LogLevel               - Specifies the output level shown in the log (1-4).
/NoRestart              - Suppresses automatic reboots and reboot prompts.
/Quiet                  - Suppresses all output except for error messages.
/ScratchDir             - Specifies the path to a scratch directory.
For more information about these DISM options and their arguments, specify an
option immediately before /?.
Examples:
    DISM.exe /Mount-Wim /?
    DISM.exe /ScratchDir /?
    DISM.exe /Image:C:\test\offline /?
    DISM.exe /Online /?
C:\WINDOWS\system32>dism.exe/online/?
Deployment Image Servicing and Management tool
Version: 6.3.9600.17031
Error: 87
The online/? option is unknown.
For more information, refer to the help by running DISM.exe /?.
The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log
C:\WINDOWS\system32>dism.exe /online /?
Deployment Image Servicing and Management tool
Version: 6.3.9600.17031
Image Version: 6.3.9600.17031
The following commands may be used to service the image:
WINDOWS EDITION SERVICING COMMANDS:
/Optimize-Image         - Performs specified configurations to an offline
                            image.
/Set-ProductKey         - Sets the product key of the offline image.
/Get-TargetEditions     - Displays a list of Windows editions that an image
                            can be upgraded to.
/Get-CurrentEdition     - Displays the edition of the current image.
/Set-Edition            - Upgrades an image to a higher edition.
DEFAULT ASSOCIATIONS COMMANDS:
/Remove-DefaultAppAssociations - Removes the default application associations
                            from a Windows image.
/Import-DefaultAppAssociations - Imports a set of default application
                            associations to a Windows image.
/Get-DefaultAppAssociations - Displays the list of default application
                            associations from a Windows image.
/Export-DefaultAppAssociations - Exports the default application associations
                            from a running operating system.
APPX SERVICING COMMANDS:
/Set-ProvisionedAppxDataFile - Places custom data into the specified app
                            package (.appx or .appxbundle). The specified
                            application package must already be in the image.
/Remove-ProvisionedAppxPackage - Removes app packages (.appx or .appxbundle)
                            from the image. App packages will not be installed
                            when new user accounts are created.
/Add-ProvisionedAppxPackage - Adds app packages (.appx or .appxbundle) to the
                            image and sets them to install for each new user.
/Get-ProvisionedAppxPackages - Displays information about app packages
                            (.appx or .appxbundle) in an image that are
                            set to install for each new user.
UNATTEND SERVICING COMMANDS:
/Apply-Unattend         - Applies an unattend file to an image.
DRIVER SERVICING COMMANDS:
/Remove-Driver          - Removes driver packages from an offline image.
/Add-Driver             - Adds driver packages to an offline image.
/Get-DriverInfo         - Displays information about a specific driver
                            in an offline image or a running operating system.
/Get-Drivers            - Displays information about all drivers in
                            an offline image or a running operating system.
/Export-Driver          - Export all third-party driver packages from an
                            offline image or a running operating system.
INTERNATIONAL SERVICING COMMANDS:
/Set-LayeredDriver      - Sets keyboard layered driver.
/Set-UILang             - Sets the default system UI language that is used
                            in the mounted offline image.
/Set-UILangFallback     - Sets the fallback default language for the system
                            UI in the mounted offline image.
/Set-UserLocale         - Sets the user locale in the mounted offline image.
/Set-SysLocale          - Sets the language for non-Unicode programs (also
                            called system locale) and font settings in the
                            mounted offline image.
/Set-InputLocale        - Sets the input locales and keyboard layouts to
                            use in the mounted offline image.
/Set-TimeZone           - Sets the default time zone in the mounted offline
                            image.
/Set-AllIntl            - Sets all international settings in the mounted
                            offline image.
/Set-SKUIntlDefaults    - Sets all international settings to the default
                            values for the specified SKU language in the
                            mounted offline image.
/Gen-LangIni            - Generates a new lang.ini file.
/Set-SetupUILang        - Defines the default language that will be used
                            by setup.
/Get-Intl               - Displays information about the international
                            settings and languages.
APPLICATION SERVICING COMMANDS:
/Check-AppPatch         - Displays information if the MSP patches are
                            applicable to the mounted image.
/Get-AppPatchInfo       - Displays information about installed MSP patches.
/Get-AppPatches         - Displays information about all applied MSP patches
                            for all installed applications.
/Get-AppInfo            - Displays information about a specific installed MSI
                            application.
/Get-Apps               - Displays information about all installed MSI
                            applications.
PACKAGE SERVICING COMMANDS:
/Add-Package            - Adds packages to the image.
/Remove-Package         - Removes packages from the image.
/Enable-Feature         - Enables a specific feature in the image.
/Disable-Feature        - Disables a specific feature in the image.
/Get-Packages           - Displays information about all packages in
                            the image.
/Get-PackageInfo        - Displays information about a specific package.
/Get-Features           - Displays information about all features in
                            a package.
/Get-FeatureInfo        - Displays information about a specific feature.
/Cleanup-Image          - Performs cleanup and recovery operations on the
                            image.
For more information about these servicing commands and their arguments,
specify a command immediately before /?.
     Examples:
         DISM.exe /Image:C:\test\offline /Apply-Unattend /?
         DISM.exe /Image:C:\test\offline /Get-Features /?
         DISM.exe /Online /Get-Drivers /?
C:\WINDOWS\system32>
C:\WINDOWS\system32>DISM.exe /Online/Cleanup-image /restorehealth
Deployment Image Servicing and Management tool
Version: 6.3.9600.17031
Error: 87
The online/cleanup-image option is unknown.
For more information, refer to the help by running DISM.exe /?.
The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log
C:\WINDOWS\system32>DISM.exe /Online /Cleanup-image /?
Deployment Image Servicing and Management tool
Version: 6.3.9600.17031
Image Version: 6.3.9600.17031
/Cleanup-Image /RevertPendingActions
WARNING! You should use the /RevertPendingActions option only in a
system-recovery scenario to perform recovery operations on a Windows image
that did not boot.
    Example:
      DISM.exe /Image:C:\test\offline /Cleanup-Image /RevertPendingActions
/Cleanup-Image /spsuperseded [/hidesp]
Use /SPSuperseded to remove any backup files created during the installation
of a service pack. Use /HideSP to prevent the service pack from being listed
in the Installed Updates for the operating system.
WARNING! The service pack cannot be uninstalled after the /SPSuperseded
operation is completed.
    Example:
      DISM.exe /Image:C:\test\offline /Cleanup-Image /spsuperseded /hidesp
/Cleanup-Image {/CheckHealth | /ScanHealth | /RestoreHealth}
Use /CheckHealth to check whether the image has been flagged as corrupted
by a failed process and whether the corruption can be repaired.
Use /ScanHealth to scan the image for component store corruption.
Use /RestoreHealth to scan the image for component store corruption, and
then perform repair operations automatically.
Use /Source with /RestoreHealth to specify the location of known good
versions of files that can be used for the repair. For more information on
specifying a source location, see
http://go.microsoft.com/fwlink/?LinkId=243077.
Use /LimitAccess to prevent DISM from contacting WU/WSUS.
    Example:
      DISM.exe /Online /Cleanup-Image /ScanHealth
      DISM.exe /Image:c:\offline /Cleanup-Image /RestoreHealth
      /Source:c:\test\mount
/Cleanup-Image /StartComponentCleanup [/ResetBase]
Use /StartComponentCleanup to clean up the superseded components and reduce
the size of the component store. Use /ResetBase to reset the base of
superseded components, which can further reduce the component store size.
WARNING! The installed Windows Updates cannot be uninstalled after the
/StartComponentCleanup with /ResetBase operation is completed.
    Example:
      DISM.exe /Image:C:\test\offline /Cleanup-Image /StartComponentCleanup
/Cleanup-Image /AnalyzeComponentStore
Use /AnalyzeComponentStore to create a report of the WinSxS component store.
For more information about the WinSxS report and how to use the information
provided in the report, see
http://go.microsoft.com/fwlink/?LinkId=293367.
    Example:
      DISM.exe /Image:C:\test\offline /Cleanup-Image /AnalyzeComponentStore
C:\WINDOWS\system32>DISM.exe /Online /Cleanup-image /Restorehealth
Deployment Image Servicing and Management tool
Version: 6.3.9600.17031
Image Version: 6.3.9600.17031
[==========================100.0%==========================]
The restore operation failed. Either the repair source was not found or the comp
onent store cannot be repaired.
Error: 0x800f081f
DISM failed. No operation was performed.
For more information, review the log file.
The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log
C:\WINDOWS\system32>
C:\WINDOWS\system32>
I'm just techie wanna be in Upper Arlington Ohio

Intune shows Windows 8 / Laptop shows Windows 8.1 Pro

I work at a small shop, thus me and another guy are effectively the IT department. Yesterday, I downloaded an ISO image of 8.1 Pro from Intune, did a clean install, and now have 8.1 Pro showing as the OS on my laptop. However, when going into Intune, it
shows as 8.0. I'm wondering if this is just a weird bug in Intune or if I did something incorrectly on the laptop during the installation process. Either way, my laptop works (for now) and, I've seemingly been getting the updates from Intune. Thanks!

I know this is old but I’m trying to clean up old posts. Did you ever solve this? If so it would be good if you could post the solution to assist others. If not, at this stage,
as nobody has answered, I would recommend that you call Intune support.
You will find your local Intune support number here
http://technet.microsoft.com/en-US/jj839713.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Toshiba harddrive doesn't show up on macbook pro but shows up on macmini

1 tb toshiba harddrive won't show up on macbook pro. Other external harddrives have showed up on Macbook pro.
The toshiba does show up on my mac mini.
I checked in Disk Utility to see if it showed up there in the macbook pro and it did not.
macbook pro - maverick
mac mini has 10.8.5
Does anyone have a clue? Thanks for any tips.

I had this same problem with an external seagate drive I was using as a time machine backup for my iMac. When I installed/updated OS 10.9 on the iMac, the seagate drive would not show up on the iMac.
The seagate drive shows up on my MBP/r even after updating the MBP/r to OS10.9
I just checked again to make sure this info is accurate, it is accurate.
The seagate drive still doesn't show up on the iMac but does show on the MBP/r.
The seagate drive does not show in disk utilities on the iMac but does show on the MBP/r.
I finally bought another external HD for my back-ups, I needed that drive!
BTW, I did not buy another seagate.
I have a couple toshiba external drives and, so far, they are working ok, on both my computers.
I don't get it either.

My win 7 home premium cannot connect the sharing printer (EPSON L1100) in Windows server 2003 it say "Windows cannot connect to the printer. Accses denied"

in My office there is a win server 2003 R2 computer, i install a printer Epson L1100 in that computer, and it successfull, and i can print using that printer from that computer..
I already share this printer, but when i try to connect the printer from my laptop using OS Win 7 Home Premium.. it has error
"Windows cannot connect to the printer. Accses denied"...
and then i try connect using other computer but same OS (win 7 Home premium) it still has same error...
i usually connect to the server computer using //(the ip of computer) , for example
//52.30.20.66 .. that is my IP server..
and than i right click in shared printer which appears in windows explorer, and i choose
Connect... but it contain error "Windows cannot connect to the printer. Accses denied"..
anyone know the solution from this error???
i`m sorry if my english is bad.. i`m from indonesia

Got a local password/username on your Win7 ? Create the same on the 2003R2 as you seem in workgroup
net user /add useraccountname mypassword
net localgroup users useraccountname /add (I think it's users the name, you can validate to be sure) or
net localgroup administrators useraccountname /add in worst case.
nb, or add the user guess in the printer share security
Regards, Philippe

OfficeJet 8000 not showing up in terminal services connections

I have recently been struggling with officejet 8000 creation/deletion on 2k3 terminal services. Looking through the event log, it shows that these printers are created, and then immediately deleted... I was able to map one of the printers to the server, but that's because it's on a local network. The remote users won't have that capability. The machines in question are windows 7.
Thanks

You would actually reset your password from the recovery partition. Reboot using cmd-R, go to the Terminal in the Utilities menu, type resetpassword and proceed.
Matt

TS4006 How do I add iphone4s to iCloud's "find my phone"? I turned on macbook pros system prefs to "find my phone", turned on iphone4s's "location services" and set up iCloud, etc. iPhone4s still won't show-but macbook does show. It receives gmail, weathe

How do I add my new iPhone4s to iCloud's "Find my iPhone"? I followed the iCloud instructions and turned on Macbook Pros' system prefs to "find my mac", turned on iPhone4s's "location services" and set up iCloud, etc. In the "Find my iphone" tab of my new iCloud account (on my Macbook Pro) my iPhone4s still won't show—but my macbook does show. I had my iPhone4s set up at the phone store (2 days ago) and It receives gmail, my contacts and calender entries, the weather, etc. I installed the "Find iPhone" app from iTunes on the iPhone4s, synched to iTunes, even reset the phone, but the only device that gets located is my Macbook Pro. I can send a "sound" message to my Mac (and the Mac recieves it) but unable to see the iPhone4s from my Mac, let alone send any message. Any suggestions to get the iPhone4s device to appear in iCloud?
Thank you in advance for your help.

OK, I figured it out...I deleted the iCloud account off my iPhone (Settings, iCloud, Delete Account), and then added iCloud back in (Settings, iCloud, SignIn)....and then my email (iCloud) and "Find my phone" features worked! Nice!!!!

Win 2008R2 terminal services, it won't show Windows 8.1 pro redirected printer

Similar Messages

Maybe you are looking for