Win 2012 VM won't start

Hi
I have a windows 8.1 pro host. I've been running a Win 2012 server VM as a hyper-v guest for the past 6 months and all was good. I had to shuffle around the .vhd files yesterday because my host was running out of disk space. In doing this I managed to break
the VM.
I've created a new VM from scratch and attached a backup copy of the .vhd which is about 4 weeks old and 60gb in size. When I boot the new VM I'm presented with a blue screen and the following options:
1. Continue (when I choose this it reboots and I end up back the same place)
2. Troubleshoot
3. Turn off your PC
Could anyone please advise what steps I can take to determine the reason for the fault. I'm afraid I know very little about hyper-v, for the last six months it's worked great.
Thanks,
Rob.

Had you previously tested restoring your VM from your backup? Or is this the first time? Maybe your backup process is not providing a clean backup? This does not really sound like a Hyper-V issue, but a corrupt backup issue. Sorry
to say, but an untested backup is really just a way to use up electronic bits.
.:|:.:|:. tim

Similar Messages

Macbook Pro 2012 Retina Won't Start, burnt power pins on power port, digital artist dead in the water

After a year of owning my macbook pro late 2012 retina model, it started having difficulty charging, it wouldn't charge even when green on the magsafe, and had difficulty turning orange, basically right after the 1 year warranty was over by one month, I went into the apple store and they told me that I simply needed to replace the power adapter and cord and it would be fine, but that it most likely was caused by me plugging it into a power strip, and that I had to plug it directly into the wall in its own power slot, which they never said that was what you were supposed to do when I purchased the laptop and could not find it anywhere in the literature. It was fine in the store for the apple worker, but after even just a few months I had to to constantly twist and unplug and replug the magsafe adapter from different angles just to get it to work, and it was like a living ****, as I am a digital artist and my wacom tablet will not work until my macbook pro is charging and the magsafe is orange, so everyday I would waste 30 minutes to an hour with the finicky magsafe, until recently my macbook pro will not turn on at all.
Since the problem arose after warranty I had to pay out of pocket for the replacement magesafe cord, which was a temporary solution, I pointed out that the magsafe power port on the laptop itself also had burn marks just like the magsafe cord that had a few pins pushed in and was slightly blackened but the attendant ignored that and said it was fine and just swapped out the cord. The "genius" attendant claimed if I just plugged in the macbook pro directly into the wall, everything would be fine and back to normal, and I did just that, I never plugged it into a power strip ever again, and still we arrive to my current predicament.
I believe I have to repair the actual power port the magsafe plugs into on the laptop, and get a new magsafe cord all over again, but it will be much more expensive than simply swapping out a cord this time, and I don't think the reason this happened to begin with has been truly identified, and I'm worried I have to make this repair every year, and I can't afford this kind of planned obsolescence, and I thought I was getting the best laptop in the world, and it was, everything was perfect not one single problem, except for this power issue, which now won't even allow me to use the computer at all and is now a giant paper weight, and leaves a dirty taste in my mouth when it comes to apple products.
I live in San Francisco in a house that was built around 1910 and don't know much about what or when renovations were made for power, but I have a feeling some kind of incorrect voltage is happening, and I was never instructed on this, and every other macbook is fine, my roommates have earlier models like the 2007 and 2009 MacBooks and have no problem like mine.
Please help me

I don't understand why and how the red light in the audio jack is still on while the computer is totally off, not connected to any power source and the battery seems to be empty... how is taht possible?
Because the battery is not empty, something is messed up, likley the SMC.
All I can advise is doing a SMC Reset, which resets the power firmware in case it got messed up and hopefully that will charge the battery up like normal.
If you can't do it or it doesn't work tommorow after charging up (turned off) overnight then just take it to Apple.
https://support.apple.com/kb/ht3964

Win 7 setup won't start up on my new iMac 27 inch

I just bought my new iMac 27 inch n try to
Install win 7 using boot camp but it just freeze at the screen with "starting window" but it just nv start anyone can help to solve this problem??? No matter how Many times I restart it still the same

Try installing either one of the two; one of the modules is likely faulty. If so, contact the seller.
(122604)

Windows Server 2012 installation won't start

Hi,
I'm trying to install windows server 2012 which i downloaded from my MSDN subscription,
i'm installing it on HP 8100 Convertiable Mini-tower.
Windows loading files and then when the windows icon shows up it just restart the computer, and it enter an endless boot loop.

Hi,
In addition to Tim’s suggestions, we need to ensure that we have updated and digitally signed kernel-mode drivers for Windows Server 2012 for x-64 based operating system.
Installing Windows Server 2012
http://technet.microsoft.com/en-us/library/jj134246.aspx
Best regards,
Frank Shen

2012 Macbook won't start but fan maxes out

I cam home today after 4 day travelling. The Macbook was turned off while I was away with no power connected. When I tried to start it today the power light flashes (not slow blink) about every 3 seconds and the fan runs full but nothing starts up.
I have done PRAM, SMC reset, disconnected and reconnected the battery, reseated the ram modules. Nothing has worked. What am I missing?

Take a look at this. Specifically look at 3, 4, 7 & 8 and see if any of them can work for you.
https://discussions.apple.com/docs/DOC-3353
Ciao.

IMac 2012-13 won't start regularly. Only starts in Safe Mode

Need help troubleshooting, or should I just take into the Genius Bar?
Just happened for the first time today. I've heard that third-party apps may cause these issues. I run Intego Protection Software with a LaCie ExHDD for backups.
Need help ASAP!
Thank you!

Back up all data to at least two different storage devices, if you haven't already done so. One backup is not enough to be safe. The backups can be made with Time Machine or with Disk Utility. Preferably both.
Erase and install OS X. This operation will destroy all data on the startup volume, so you had be better be sure of the backups. If you upgraded from an older version of OS X, you'll need the Apple ID and password that you used, so make a note of those before you begin.
When you restart, you'll be prompted to go through the initial setup process in Setup Assistant. That’s when you transfer the data from a backup.
Select only users and Computer & Network Settings in the Setup Assistant dialog—not Applications or Other files and folders. Don't transfer the Guest account, if it was enabled.
After that, run Software Update.
If the problem is resolved after the clean installation, reinstall third-party software selectively. I can only suggest general guidelines. Self-contained applications that install into the Applications folder by drag-and-drop or download from the App Store are usually safe. Anything that comes packaged as an installer or that prompts for an administrator password is suspect, and you must test thoroughly after reinstalling each such item to make sure you haven't restored the problem.
I strongly recommend that you never reinstall commercial "anti-virus" products or "utilities," nor any software that changes the user interface or modifies the functions of built-in applications. If you do that, the problem is likely to recur.
Before installing any software, ask yourself the question: "Am I sure I know how to uninstall this without having to wipe the volume again?" If the answer is "no," stop.
Never install any third-party software unless you know how to uninstall it.

HOW TO FIX HD AUDIO/UNKNOWN DEVICE/DEVICE WON'T START LENOVO H320 Win 7 64-bit

Fix for - HD Audio devices won't start or you can't load correct driver. Lenovo H320 - Win 7 64-bit I-3 processor. 5 series/3400 chipset
Here is a working procedure to fix the problem when you install windows 7 64-bit and can't get the correct drivers installed for the HD Audio devices 1)Realtek AC97 HD Audio device id = HDAUDIO\FUNC_01&VEN_10EC&DEV_0662&SUBSYS_17AA3604&REV_1001
and 2)Intel HD Audio device id = HDAUDIO\FUNC_01&VEN_8086&DEV_2804&SUBSYS_80860101&REV_1000 Regards >>> Sucromatic
For an IBM LENOVO 320 with Windows 7 64-bit Home Premium Version download these drivers to a directory in a second partition to prevent this nightmare from happenning in the future.
1)AC 97 high def audio version
Realtek HDA 2.67found on http://wikidrivers.com/wiki/Main_Page or at www.realtek.comon right of screen on homepage and
2) Intel HD GRAPHIC and HD Audio version
Intel GMA 15.22.52.2559 (Vista/7) 14.46.8.5387 (XP)
found on
http://wikidrivers.com/wiki/Main_Page.
Select your OS and and whether 32 or 64 bit. I recommend the .exe version as it works very smoothly. Uninstall HD AUDIO DEVICE or whatever it is called maybe "unknown device" with ac97 device ID "HDAUDIO\FUNC_01&VEN_10EC&DEV_0662&SUBSYS_17AA3604&REV_1001." Afterwards install AC 97 HD Audio Driver.
After install reboot and wait till computer completely starts.
Now uninstall Intel HD Graphics or your graphics device. When you get the uninstall box open, select delete the driver software for this device and then OK. When prompted to reboot select NO and Immediately start the install of the Intel GMA driver. Which installs both the Graphics Adapter and the Intel HD Audio. Reboot when finished and all HD Audio devices will be functional (hopefully). You will now have these versions installed. As shown in device manager/device properties/Driver tab
Now uninstall Realtek AC97 driver you first installed to delete annoying Red Lexmark/realtek icon in Notification area (If your computer shows it after reboot) and windows driver update will install a microsoft driver (shown below)that works without the stupid lexmark red icon. See below. You will now have these versions installed. As shown in device manager/device properties/Driver tab
High Definition Audio Device
Driver Provider: Microsoft
Driver Date: 11/19/2010
Driver Version: 6.1.7601.17514
Digital Signer: Microsoft Windows
IntelR) HD Graphics
Driver Provider: Intel Corporation
Driver Date: 1/10/2012
Driver Version: 8.15.10.2622
Digital Signer: Microsoft Windows Hardware Compatibility Publisher
Intel (R) Display Audio
Driver Provider: Intel(R) Corporation
Driver Date: 8/23/2011
Driver Version: 6.14.0.3086
Digital Signer: Microsoft Windows Hardware Compatibility Publisher
Voila. Now go to intel and run a driver update scan and it will likely correctly identify your Intel pieces and offer downloads for any that are not current. Good Luck!

it is a user to user forum without any intervention from apple information-wise.I think this question appears and being discussed in another thread
http://discussions.apple.com/thread.jspa?threadID=2411685&tstart=0

Slow applications start from win 2012 file server using win 7 workstations

I hope someone can help me with why applications are slow to load i have replaced a 8 year old server running win 2003 and replaced it with dell t620 running win 2012 r2 it is like 20 times faster but it is slower than the old server. the office has
7 win 7 x64 machines all our applications are running from win 2012 file server. The server is set up as following the server runs with two hyper-v machines one machine runs ad, file server, dhcp, dns and printer server and the other is domino server and remote
desktop.
the machine is more than capable but it is not so i started reading after i run out of ideas. i looked every where but the issue is with the server after trying everything else i did a simple test If i go to the application folder and click on it apps load
instantly if i then type a unc path it takes from instant load to 3 and a bit seconds the same as the workstations. The same speed if I use ip address.
network cards are intel
i would really appreciate if somebody has suggestions that i could try
thank you

Hi,
Do you mean that applications in the application folder start slowly when you access the application folder on the Windows 2012 R2 file server from Windows 7 workstations using UNC path or IP address. Do all the files in the application folder have the same
issue? Please create a shared folder on the file server, then access the shared folder from Windows 7 workstations to check if the issue still exists.
You could disable SMBv3 on server 2012 to check if the issue related to SMB protocol.
How to enable and disable SMBv1, SMBv2, and SMBv3 in Windows Vista, Windows Server 2008, Windows 7, Windows Server 2008 R2, Windows 8, and Windows Server 2012
http://support.microsoft.com/kb/2696547/en-us
Warning: We do not recommend that you disable SMBv2 or SMBv3. Disable SMBv2 or SMBv3 only as a temporary troubleshooting measure. Do not leave SMBv2 or SMBv3 disabled.
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Recently installed Creative Suite 6 and am using Acrobat Pro. Suddenly it crashes and now it won't start. I installed the current update but still not. This happened before, in 2012, and was finally fixed. what do I do? Duncan

Hi all,
My recently installed (Windows 8.1) Acrobat Pro (part of CS6) suddenly stopped working - now it won't start.
This happened on Windows 7 in 2012 and was eventually fixed.
Any advice on what I should do? [I can't find where to post a question to the adobe help people]
- Duncan

Well, the computer stopped starting up at all. It could never find the operating system. I tried safe mode and virtually every other non-standard start-up option. I then did target disk mode with another MBP and got the message: "The disk you inserted was not readable by this computer." I then tried using disk utility and it couldn't retrieve retrieve the data using restore (writing to an external drive). I suspect that this means the hard drive would need to be replaced. In your expert opinions, is this necessarily true? Could this still be just a software problem, or perhaps some other piece of hardware?
Part of the reason I ask is that this laptop is now nearly five years old. It's needed a new battery for two years. If it's a virtual certainty that the hard drive is toast, I don't want to pay $150 for someone to take it out and try to recover any remaining data from it, only to reveal that the data is indeed irretrievable (since the computer itself is probably only worth $300-400 at this point). The nearest Genius Bar is also more than 2 hours away. Am I going about this the right way by using disk utility, given that the hard drive won't mount to the desktop of the other computer? If the hard drive can't be reat in target disk mode, does that confirm that it is the hard drive?
Thanks
Oh also, it does still make the startup noise, even though I can't run the AHT since I can't get it to start up in safemode. I thought this mean that it passing various hardware tests. Does this not apply to the hard drive?
Message was edited by: Euain_ *add-on*

11g DB Control service won't start on Win XP Pro

Hi all,
In installing my 11g database, the DB Control service won't start so the database config fails prior to doing the EM stuff. The system event viewer says:
The OracleDBConsoleorcl11p1 service terminated with service-specific error 2 (0x2).
Querying further, I find the following:
SERVICE_NAME: OracleDBConsoleorcl11p1
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1066 (0x42a)
SERVICE_EXIT_CODE : 2 (0x2)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
Researching the error code 1066 simply says it is a vendor-specific error code. Anyone out there ever come across such a thing?
Cheers,
Jim Greetham

Jim,
Were you able to figure out the problem why you were getting 'service specific error occurred:2'?
I have the same issue.
DB version: 11.1.0.6.0
OS: Win XP (latest patches and updates applied)
The database and other pieces are working just fine.
Thank you,
Taj

[Solved] Project64 (which runs via wine) won't start w/ an error

I'm on 64 bit arch laptop trying to run project64, but the app won't start. I installed project64 from the repo and it pulled wine as a dependancy. Upon firsst-run I was prompted to install wine gecko and hit the install button. This froze and I force-closed the window which then prompted me to select a language. I got a "Program Error" message saying that pj64 encountered a serious problem and needs to close. I then found and installed the wine_gecko package, but this didn't solve the problem.
The console outputs the following:
wine: Unhandled page fault on read access to 0xffffffff at address 0x7cdb9eda (thread 0009), starting debugger...
Someone please help me.
Last edited by vectorman (2011-08-12 22:11:25)

Make sure you have the correct lib32 drivers for your graphics card, since wine is a 32 bit app. For example,m for nvidia you need the lib32-nvidia-utils package. This seems to be more of a general Wine issue rather than an issue with project64 though, but hopefully installing the correct package should help. I maintain the project64 AUR package though, so I feel like I should do my best to help, and possuibly imporve my package too if something's wrong with it Also, if that doesn't work, try running this, it will give more terminal output that could be useful (by default it uses WINEDEBUG=-all to get rid of the extra debug info and stuff wine outputs by default, but it might be helpful here):
wine "$HOME"/.project64/Project64.exe
Also, IMO, all the Mupen64plus frontends seem to be kinda crappy right now (cutemupen crashesd so I can't even try that one out...), but the one I'va had the best luck with is wxmupen64plus-hg, so give that a shot, though it does still have some issues sometimes, but it lets you configure the controllers and stuff, so that's good And if you felt like using it, you could install version 1.5 (it's in AUR too, but I haven't tested it), since version 1.5 has a GUI and it always worked great when I used to use that
Last edited by doorknob60 (2011-08-12 06:09:19)

Win xp, downloaded ps free, had problems, now won't start, "user name, org, or serial number missing

win xp, downloaded ps free, had problems, now won't start, "user name, org, or serial number missing".

Reinstall.
Mylenium

Macbook Pro about 2012 won't start with out power lead in and runs very very slow Maverick OS

Macbook Pro about 2012 won't start with out power lead in and runs very very slow Maverick OS?

Take each of these steps as needed, and check to make sure it hasn't been fixed with a reboot afterwards before trying the next step.
Backup your data if you haven't already:
https://discussions.apple.com/docs/DOC-1992
If you use Airplay, see https://discussions.apple.com/docs/DOC-6831
If you don't use Airplay, be sure to upgrade to 10.9.2, using this update:
http://support.apple.com/kb/DL1726
Make sure your hard drive is not over 85% full.
Make sure Spotlight is not indexing.
Make sure Time Machine is not running when you do other tasks.
Check to make sure you have not accidently/purposefully installed MacKeeper, as it will slow down your Mac:
https://discussions.apple.com/docs/DOC-3036
Remove any other system cache cleaning applications.
Reset the SMC:
http://support.apple.com/kb/ht3964
Reset the PRAM:
http://support.apple.com/kb/ht1379
Check to make sure there aren't any signs the power adapter might be damaged, or the wrong one*:
http://www.macmaps.com/frayguide.html
If there are still issues, you may need to replace the battery:
https://www.apple.com/batteries/replacements.html

My iPad, purchased in Nov. 2012 won't start after the most recent IOS update, and it's fully charged. Any suggestions?

My iPad purchased in 11/2012 won't start since updating to the most recent IOS version in 3/2015.
It's fully charged but pressing the HOME button or SLEEP/WAKE button, individually or together doesn't have any effect.
Suggestions?

If it has NEVER been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this.

Acrobat X Pro (10 and lower) won't start on Windows 7 (64-bit)

Hello, does anyone know why Acrobat X Pro (10 and lower) won't start on Windows 7 (64-bit)? It just doesn't respond whether I try to open files with it or double-click to start the program. Re-installation and Repair doesn't help. I had the same issue with the previous versions of Acrobat on this computer.
Thank you!

Ditto to all of the above. Acrobat Pro was working fine until a day or two ago, then kaput. Reader still functions. I have Win 7 (64bit), CS6 Design and Web Premium. Anyone with any new ideas?
I don't seem to have an alm.log file, but I do have the amt3.log, see below.
amt3.log
2012-06-12 07:54:34 [5740] AMT: START SESSION, library version 3.5.0.34,3.5
2012-06-12 07:54:34 [5740] AMT: Initializing C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\
2012-06-12 07:54:34 [5740] AMT: Adobe License Manager version 3.5 (build 2.0) RELEASE
2012-06-12 07:54:34 [5740] AMT: Virtualization Turned off
2012-06-12 07:54:34 [5740] ServiceLoader: looking for library C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\adobe_caps.dll
2012-06-12 07:54:34 [5740] ServiceLoader: Found library C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\adobe_caps.dll
2012-06-12 07:54:34 [5740] PCDService: PCD Service in threaded mode
2012-06-12 07:54:34 [5740] performance: AMTPreObtainProductLicense took 4.550707 ms
2012-06-12 07:54:34 [5740] PCD thread: PCD thread started
2012-06-12 07:54:34 [5740] ServiceLoader: looking for library C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Adobe_OOBE_Launcher.dll
2012-06-12 07:54:34 [5740] ServiceLoader: Found library C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Adobe_OOBE_Launcher.dll
2012-06-12 07:54:34 [5740] AMT: App Product Locale [0] = en_US
2012-06-12 07:54:34 [5740] config: Loading configuration for C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\AMT\application.xml
2012-06-12 07:54:34 [5740] config: Found payload code {AC76BA86-1033-F400-7760-000000000005}
2012-06-12 07:54:34 [5740] PCDService: found driver code {402F6F2E-5683-491C-977D-0CA599A07CAF}
2012-06-12 07:54:34 [5740] config: config: Host app was installed, using installed license configuration.
2012-06-12 07:54:34 [5740] PCDService: No value for key [FLMap] in hive [AcrobatPro-AS1-Win-GM{|}ALL] in cache.
2012-06-12 07:54:34 [5740] config: Setting current license to the driver at startup because no mapping was found.
2012-06-12 07:54:34 [5740] config: Setting current license to DesignWebSuitePremium-CS6-Win-GM [ALL]
2012-06-12 07:54:34 [5740] config: payload code: {AC76BA86-1033-F400-7760-000000000005}
2012-06-12 07:54:34 [5740] config: driver payload code: {402F6F2E-5683-491C-977D-0CA599A07CAF}
2012-06-12 07:54:34 [5740] config: driver licensing code: DesignWebSuitePremium-CS6-Win-GM
2012-06-12 07:54:34 [5740] config: current licensing code: DesignWebSuitePremium-CS6-Win-GM
2012-06-12 07:54:34 [5740] config: current locale code: ALL
2012-06-12 07:54:34 [5740] config: Done loading configuration
2012-06-12 07:54:34 [5740] AMT: Locale from PCD [0] = en_US
2012-06-12 07:54:34 [5740] AMT: Reordered Installed App Product Locale [0] = en_US
2012-06-12 07:54:34 [5740] config: Setting insalled locales
2012-06-12 07:54:34 [5740] config: Changing locale to "en_US" because old locale "" is not in the new list of installed languages
2012-06-12 07:54:34 [5740] ServiceLoader: looking for library C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\asneu.dll
2012-06-12 07:54:34 [5740] ServiceLoader: Found library C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\asneu.dll
2012-06-12 07:54:34 [5740] AMT: config: Finding license info for payload: {402F6F2E-5683-491C-977D-0CA599A07CAF}
2012-06-12 07:54:34 [5740] AMT: config: PayloadCode: {AC76BA86-1033-F400-7760-000000000005}
2012-06-12 07:54:34 [5740] AMT: config: Driver PayloadCode: {402F6F2E-5683-491C-977D-0CA599A07CAF}
2012-06-12 07:54:34 [5740] AMT: config: Installed LicensingCode: DesignWebSuitePremium-CS6-Win-GM
2012-06-12 07:54:34 [5740] PCDService: No value for key [AdobeUpdaterCodeV2] in hive [{AC76BA86-1033-F400-7760-000000000005}] in master.
2012-06-12 07:54:34 [5740] PCDService: No value for key [BridgeTalkCode] in hive [{AC76BA86-1033-F400-7760-000000000005}] in master.
2012-06-12 07:54:34 [5740] PCDService: No value for key [AdobeUpdaterCodeV2] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
2012-06-12 07:54:34 [5740] PCDService: No value for key [BridgeTalkCode] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
2012-06-12 07:54:34 [5740] PCDService: No value for key [ISO_TAGGING_DISABLED] in hive [AcrobatPro-AS1-Win-GM] in master.
2012-06-12 07:54:34 [5740] PCDService: No value for key [EULA] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
2012-06-12 07:54:34 [5740] PCDService: No value for key [Registration] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
2012-06-12 07:54:34 [5740] PCDService: No value for key [Registration] in hive [{AC76BA86-1033-F400-7760-000000000005}] in master.
2012-06-12 07:54:34 [5740] PCDService: No value for key [Growl] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
2012-06-12 07:54:34 [5740] PCDService: No value for key [Growl] in hive [{AC76BA86-1033-F400-7760-000000000005}] in master.
2012-06-12 07:54:34 [5740] PCDService: No value for key [Updates] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
2012-06-12 07:54:34 [5740] PCDService: No value for key [Updates] in hive [{AC76BA86-1033-F400-7760-000000000005}] in master.
2012-06-12 07:54:34 [5740] AMT: config: No BridgeTalkCode found in configuration; Bridgetalk will be disabled.
2012-06-12 07:54:34 [5740] PCDService: No value for key [SuiteFeatureCount] in hive [DesignWebSuitePremium-CS6-Win-GM] in master.
2012-06-12 07:54:34 [5740] AMT: Application can be serialized (sif file found).
2012-06-12 07:54:34 [5740] PCDService: No value for key [SN] in hive [AcrobatPro-AS1-Win-GM{|}en_US] in cache.
2012-06-12 07:54:34 [5740] config: No en_US licensed serial number found in AcrobatPro-AS1-Win-GM
2012-06-12 07:54:34 [5740] PCDService: No value for key [SN] in hive [DesignWebSuitePremium-CS6-Win-GM{|}ALL] in cache.
2012-06-12 07:54:34 [5740] config: No ALL licensed serial number found in DesignWebSuitePremium-CS6-Win-GM
2012-06-12 07:54:34 [5740] PCDService: No value for key [AMTConfigPath] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in cache.
2012-06-12 07:54:34 [5740] PCDService: No value for key [LineCV 6] in hive [DesignWebSuitePremium-CS6-Win-GM{|}ALL] in cache.
2012-06-12 07:54:34 [5740] PCDService: No value for key [LineCV 7] in hive [DesignWebSuitePremium-CS6-Win-GM{|}ALL] in cache.
2012-06-12 07:54:34 [5740] AMT: First launch (serial [90148700767331006075]).
2012-06-12 07:54:34 [5740] AMT: Application state initialized. Obtaining Product License.
2012-06-12 07:54:34 [5740] AMT: Obtaining client features from cache.
2012-06-12 07:54:34 [5740] AMT: Obtaining client product info from cache.
2012-06-12 07:54:34 [5740] AMT: Forcing first launch workflow because product is not licensed from previous launch.
2012-06-12 07:54:34 [5740] AMT: AMT: Obtaining Product License.
2012-06-12 07:54:34 [5740] AMT: Launch Workflow not yet done in foreground in this session.
2012-06-12 07:54:34 [5740] AMT: Starting First Launch Workflow
2012-06-12 07:54:34 [5740] AMT: Running in PROV_APP
2012-06-12 07:54:34 [5740] PCDService: No value for key [EULADelay] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
2012-06-12 07:54:34 [5740] PCDService: No value for key [EULADelay] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
2012-06-12 07:54:34 [5740] PCDService: No value for key [MediaTag] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
2012-06-12 07:54:34 [5740] config: No media tag found for payload {402F6F2E-5683-491C-977D-0CA599A07CAF}
2012-06-12 07:54:34 [5740] config: Using default media policy RET
2012-06-12 07:54:34 [5740] uiswitch: EULA has already been accepted.
2012-06-12 07:54:34 [5740] AMT: Starting ALM workflow.
2012-06-12 07:54:34 [5740] AMT: Initializing ALM for serialized activation.
2012-06-12 07:54:34 [5740] ALMService: Initializing as licensed app
2012-06-12 07:54:34 [5740] ALM: _info_: Start ALM 3.5 Release (build 3.5.2.0)
2012-06-12 07:54:34 [5740] SLCoreService: Starting up SLCore 1.5 Release (build 1.5.21.224873).
2012-06-12 07:54:34 [5740] SLCoreService: Service construction took 0.0 ms and succeed.
2012-06-12 07:54:34 [5740] ALM: _info_: LEID passed DesignWebSuitePremium-CS6-Win-GM is used to configure SLCore = 0
2012-06-12 07:54:34 [5740] ALM: _info_: Host app is Licensable App
2012-06-12 07:54:34 [5740] PCDService: No value for key [AcrobatPro-AS1-Win-GM{|}16] in hive [SSC-AS1-LE-Dominance] in master.
2012-06-12 07:54:34 [5740] config: SSC LEID dir not found: C:\Program Files (x86)\Common Files\Adobe\ssc\TechnicalCommunicationSuite-TS3.5-Win-GM
2012-06-12 07:54:34 [5740] config: SSC LEID dir not found: C:\Program Files (x86)\Common Files\Adobe\ssc\TechnicalCommunicationSuite-TS3.5-Win-GM
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID AcrobatPro-AS1-Win-GM with AMT Path C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\AMT
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID AcrobatSuite-AS1-Win-GM with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\AcrobatSuite-AS1-Win-GM
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID FrameMakerServer-TS3-Win-GM with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\FrameMakerServer-TS3-Win-GM
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID TechnicalCommunicationSuite-TS3-Win-GM with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\TechnicalCommunicationSuite-TS3-Win-GM
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID DesignSuiteStandard-CS5.5-Win-GM with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\DesignSuiteStandard-CS5.5-Win-GM
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID WebSuitePremium-CS5.5-Win-GM with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\WebSuitePremium-CS5.5-Win-GM
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID DesignSuitePremium-CS5.5-Win-GM with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\DesignSuitePremium-CS5.5-Win-GM
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID MasterCollection-CS5.5-Win-GM with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\MasterCollection-CS5.5-Win-GM
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID ELearningSuite-ES2.5-Win-GM with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\ELearningSuite-ES2.5-Win-GM
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID TechnicalCommunicationSuite-TS3.5-Win-GM with AMT Path
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID V6{}TechnicalCommunicationSuite-TS4-Win-PR with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\V6{}TechnicalCommunicationSuite-TS4-Win-PR
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID V6{}FrameMakerServer-TS4-Win-PR with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\V6{}FrameMakerServer-TS4-Win-PR
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID DesignWebSuitePremium-CS6-Win-PR with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\DesignWebSuitePremium-CS6-Win-PR
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID DesignSuiteStandard-CS6-Win-PR with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\DesignSuiteStandard-CS6-Win-PR
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID MasterCollection-CS6-Win-PR with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\MasterCollection-CS6-Win-PR
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID V6{}ELearningSuite-ES6-Win-PR with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\V6{}ELearningSuite-ES6-Win-PR
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID CreativeCloud-CS6-Win-GM with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\CreativeCloud-CS6-Win-GM
2012-06-12 07:54:34 [5740] ALM: _info_: Found LEID DesignWebSuitePremium-CS6-Win-GM with AMT Path C:\Program Files (x86)\Common Files\Adobe\Adobe Creative Suite 6 Design and Web Premium\AMT
2012-06-12 07:54:34 [5740] PCDService: No value for key [MediaTag] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
2012-06-12 07:54:34 [5740] config: No media tag found for payload {402F6F2E-5683-491C-977D-0CA599A07CAF}
2012-06-12 07:54:34 [5740] config: Using default media policy RET
2012-06-12 07:54:34 [5740] ALM: _info_: MediaTagPolicy is RET
2012-06-12 07:54:34 [5740] PCDService: No value for key [NTL_WO_SN] in hive [DesignWebSuitePremium-CS6-Win-GM] in master.
2012-06-12 07:54:34 [5740] ALM: _info_: Canonical LEID is AcrobatPro-AS1-Win-GM
2012-06-12 07:54:34 [5740] ALM: _info_: Driver LEID is DesignWebSuitePremium-CS6-Win-GM
2012-06-12 07:54:34 [5740] PCDService: No value for key [901487007673310060752956] in hive [RejectedSNDomain_CS5] in cache.
2012-06-12 07:54:34 [5740] SLCoreService: Reading product config [C:\Program Files (x86)\Common Files\Adobe\Adobe Creative Suite 6 Design and Web Premium\AMT\SLConfig.xml]
2012-06-12 07:54:34 [5740] ALM: _info_: alm::IsLangPackForLocaleInstalled - Checking if lang pack is installed for ALL
2012-06-12 07:54:34 [5740] ALM: _info_: alm::IsLangPackForLocaleInstalled - Lang pack is not installed
2012-06-12 07:54:34 [5740] ALM: _time_: (func: ALM_Initialize, duration: 0.016 sec)
2012-06-12 07:54:34 [5740] AMT: Performing ALM silent license verification.
2012-06-12 07:54:34 [5740] PCDService: No value for key [EncryptedSerial] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in cache.
2012-06-12 07:54:34 [5740] PCDService: No value for key [Serial] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in cache.
2012-06-12 07:54:34 [5740] config: No pre-serial number found in {402F6F2E-5683-491C-977D-0CA599A07CAF}
2012-06-12 07:54:34 [5740] PCDService: No value for key [PSN] in hive [DesignWebSuitePremium-CS6-Win-GM{|}en_US] in cache.
2012-06-12 07:54:34 [5740] config: No en_US provisional serial number found in DesignWebSuitePremium-CS6-Win-GM
2012-06-12 07:54:34 [5740] PCDService: No value for key [PSN] in hive [DesignWebSuitePremium-CS6-Win-GM{|}ALL] in cache.
2012-06-12 07:54:34 [5740] config: No ALL provisional serial number found in DesignWebSuitePremium-CS6-Win-GM
2012-06-12 07:54:34 [5740] ALM: _info_: Validate license at Pre-Chrome time
2012-06-12 07:54:34 [5740] ALM: _info_: Searching license for locale en_US ...
2012-06-12 07:54:34 [5740] PCDService: No value for key [SN] in hive [AcrobatPro-AS1-Win-GM{|}en_US] in cache.
2012-06-12 07:54:34 [5740] config: No en_US licensed serial number found in AcrobatPro-AS1-Win-GM
2012-06-12 07:54:34 [5740] PCDService: No value for key [970787040936944783527623] in hive [RejectedSNDomain_CS5] in cache.
2012-06-12 07:54:34 [5740] SLCoreService: Reading product config [C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\AMT\SLConfig.xml]
2012-06-12 07:54:34 [5740] ALM: _info_: alm::IsLangPackForLocaleInstalled - Checking if lang pack is installed for ALL
2012-06-12 07:54:34 [5740] ALM: _info_: alm::IsLangPackForLocaleInstalled - Lang pack is not installed
2012-06-12 07:54:34 [5740] ALM: _info_: alm::IsLangPackForLocaleInstalled - Checking if lang pack is installed for ALL
2012-06-12 07:54:34 [5740] ALM: _info_: alm::IsLangPackForLocaleInstalled - Lang pack is not installed
2012-06-12 07:54:34 [5740] ALM: _info_: Found existing serialization under LEID AcrobatPro-AS1-Win-GM, the serial number locale is ALL
2012-06-12 07:54:34 [5740] PCDService: No value for key [970787040936944783527623] in hive [RejectedSNDomain_CS5] in cache.
2012-06-12 07:54:34 [5740] ALM: _info_: alm::IsLangPackForLocaleInstalled - Checking if lang pack is installed for ALL
2012-06-12 07:54:34 [5740] ALM: _info_: alm::IsLangPackForLocaleInstalled - Lang pack is not installed
2012-06-12 07:54:34 [5740] PCDService: No value for key [970787040936944783527623] in hive [RejectedSNDomain_CS5] in cache.
2012-06-12 07:54:34 [5740] ALM: _info_: alm::IsLangPackForLocaleInstalled - Checking if lang pack is installed for ALL
2012-06-12 07:54:34 [5740] ALM: _info_: alm::IsLangPackForLocaleInstalled - Lang pack is not installed
2012-06-12 07:54:34 [5740] ALM: _info_: Cached license is expired for locale en_US, continue the search to next locale
2012-06-12 07:54:34 [5740] ALM: _info_: No valid license found, fall back to the most preferred locale: en_US
2012-06-12 07:54:34 [5740] PCDService: No value for key [SN] in hive [AcrobatPro-AS1-Win-GM{|}en_US] in cache.
2012-06-12 07:54:34 [5740] config: No en_US licensed serial number found in AcrobatPro-AS1-Win-GM
2012-06-12 07:54:34 [5740] PCDService: No value for key [970787040936944783527623] in hive [RejectedSNDomain_CS5] in cache.
2012-06-12 07:54:34 [5740] ALM: _info_: alm::IsLangPackForLocaleInstalled - Checking if lang pack is installed for ALL
2012-06-12 07:54:34 [5740] ALM: _info_: alm::IsLangPackForLocaleInstalled - Lang pack is not installed
2012-06-12 07:54:34 [5740] ALM: _info_: alm::IsLangPackForLocaleInstalled - Checking if lang pack is installed for ALL
2012-06-12 07:54:34 [5740] ALM: _info_: alm::IsLangPackForLocaleInstalled - Lang pack is not installed
2012-06-12 07:54:34 [5740] PCDService: No value for key [970787040936944783527623] in hive [RejectedSNDomain_CS5] in cache.
2012-06-12 07:54:34 [5740] ALM: _info_: alm::IsLangPackForLocaleInstalled - Checking if lang pack is installed for ALL
2012-06-12 07:54:34 [5740] ALM: _info_: alm::IsLangPackForLocaleInstalled - Lang pack is not installed
2012-06-12 07:54:34 [5740] SLCoreService: Syncing to license store...
2012-06-12 07:54:35 [5740] SLCoreService: Found server mkey.
2012-06-12 07:54:35 [5740] SLCoreService: Loading license references...
2012-06-12 07:54:35 [5740] SLCoreService: Found 4 license file(s)
2012-06-12 07:54:35 [5740] SLCoreService: Parsing license file [20566957.lic] succeed.
2012-06-12 07:54:35 [5740] SLCoreService: Parsing license file [226832637.lic] succeed.
2012-06-12 07:54:35 [5740] SLCoreService: Parsing license file [28738525.lic] succeed.
2012-06-12 07:54:35 [5740] SLCoreService: Parsing license file [7412525.lic] succeed.
2012-06-12 07:54:35 [5740] SLCoreService: License store synchronization took 32.2 ms and succeed.
2012-06-12 07:54:35 [5740] SLCoreService: Query license: type = 2, duration = 30 days, remaining = expired.
2012-06-12 07:54:35 [5740] config: Setting current license to AcrobatPro-AS1-Win-GM [ALL]
2012-06-12 07:54:35 [5740] PCDService: No value for key [LoadTrial] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
2012-06-12 07:54:35 [5740] PCDService: No value for key [LoadTrial] in hive [{AC76BA86-1033-F400-7760-000000000005}] in master.
2012-06-12 07:54:35 [5740] PCDService: No value for key [PDApp_WF] in hive [AcrobatPro-AS1-Win-GM] in cache.
2012-06-12 07:54:35 [5740] PCDService: No value for key [ALM_Info_S1] in hive [AcrobatPro-AS1-Win-GM{|}ALL] in cache.
2012-06-12 07:54:35 [5740] ALM: _info_: Performing Block Check
2012-06-12 07:54:35 [5740] SLCoreService: Query license: type = 2, duration = 30 days, remaining = expired.
2012-06-12 07:54:35 [5740] PCDService: No value for key [Subscription] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
2012-06-12 07:54:35 [5740] PCDService: No value for key [Subscription] in hive [{AC76BA86-1033-F400-7760-000000000005}] in master.
2012-06-12 07:54:35 [5740] PCDService: No value for key [ACT_NOINTERNET] in hive [AcrobatPro-AS1-Win-GM] in cache.
2012-06-12 07:54:35 [5740] PCDService: No value for key [SERVICE_ONLINE] in hive [AcrobatPro-AS1-Win-GM] in cache.
2012-06-12 07:54:35 [5740] SLCoreService: Query license: type = 2, duration = 30 days, remaining = expired.
2012-06-12 07:54:35 [5740] ALM: _time_: (func: ALM_License_SilentValidate, duration: 0.046 sec)
2012-06-12 07:54:35 [5740] ALM: _info_: ALM_License_SilentValidate return license status: Invalid
2012-06-12 07:54:35 [5740] AMT: License check shows product is unlicensed.
2012-06-12 07:54:35 [5740] AMT: Product is not activated. Starting ALM launch-time product licensing UI.
2012-06-12 07:54:35 [5740] SLCoreService: Query license: type = 2, duration = 30 days, remaining = expired.
2012-06-12 07:54:35 [5740] PCDService: No value for key [PDApp_WF] in hive [AcrobatPro-AS1-Win-GM] in cache.
2012-06-12 07:54:35 [5740] SLCoreService: Query license: type = 2, duration = 30 days, remaining = expired.
2012-06-12 07:54:35 [5740] ALM: _info_: Entered ALM_NeedANAG
2012-06-12 07:54:35 [5740] SLCoreService: Query license: type = 2, duration = 30 days, remaining = expired.
2012-06-12 07:54:35 [5740] PCDService: No value for key [ADOBEID_EXT_PROFILE] in hive [970787040936944783527623] in cache.
2012-06-12 07:54:35 [5740] ALM: _info_: Exiting ALM_NeedANAG
2012-06-12 07:54:35 [5740] AMT: NAG Ignored!!.
2012-06-12 07:54:35 [5740] AMT: Licensing has been refused. Application must exit.
2012-06-12 07:54:35 [5740] AMT: Starting Data Collection for SWTag_Init()
2012-06-12 07:54:35 [5740] AMT: DoISOTagging() productCanonicalLEID = AcrobatPro-AS1-Win-GM;outMappedLEID = AcrobatPro-AS1-Win-GM, unused =
2012-06-12 07:54:35 [5740] AMT: DoISOTagging() productPayloadCode = {AC76BA86-1033-F400-7760-000000000005};driverPayloadCode = {402F6F2E-5683-491C-977D-0CA599A07CAF}
2012-06-12 07:54:35 [5740] PCDService: No value for key [EPIC_APP_543] in hive [AcrobatPro-AS1-Win-GM] in master.
2012-06-12 07:54:35 [5740] AMT: SWTag_Init() Tags Arguments CS6 Design and Web Premium; AcrobatPro-AS1-Win-GM;
2012-06-12 07:54:35 [5740] AMT: DoISOTagging() License Status = unlicensed
2012-06-12 07:54:35 [5740] AMT: DoISOTagging() Tags 970787040936944783527623; 10.0; TRIAL
2012-06-12 07:54:35 [5740] AMT: DoISOTagging() Product Version 10; 0
2012-06-12 07:54:35 [5740] performance: AMTObtainProductLicense took 117.355057 ms
2012-06-12 07:54:35 [5740] PCDService: No value for key [AdobeUpdaterCodeV2] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
2012-06-12 07:54:35 [5740] PCDService: No value for key [AdobeUpdaterCodeV2] in hive [{AC76BA86-1033-F400-7760-000000000005}] in master.
2012-06-12 07:54:35 [5740] PCDService: No value for key [Updates] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
2012-06-12 07:54:35 [5740] PCDService: No value for key [Updates] in hive [{AC76BA86-1033-F400-7760-000000000005}] in master.
2012-06-12 07:54:35 [5740] AUMService: config: No AdobeUpdaterCode found in configuration; AUM will be disabled.
2012-06-12 07:54:35 [5740] ServiceLoader: looking for library C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\updaternotifications.dll
2012-06-12 07:54:35 [5740] ServiceLoader: looking for library C:\Windows\system32\updaternotifications.dll
2012-06-12 07:54:35 [5740] ServiceLoader: Failed to find updaternotifications.dll
2012-06-12 07:54:35 [5740] ALMService: Terminating
2012-06-12 07:54:35 [5740] SLCoreService: Shutting down SLCore 1.5 Release (build 1.5.21.224873).
2012-06-12 07:54:35 [5740] SLCoreService: Service destruction took 0.6 ms and succeed.
2012-06-12 07:54:35 [5740] ALM: _info_: End ALM
2012-06-12 07:54:35 [5740] performance: AMTReleaseProductLicense took 5.815388 ms
2012-06-12 07:54:35 [5740] AMT: END SESSION.

Win 2012 VM won't start

Similar Messages

Maybe you are looking for