Win 7-64 Bit not recognizing bt500 Bluetooth connection - Linux "Isadora" sees it

None of my 3 Win 7 (one is 32 bit - Other two are 64 Bit) computers will find (discover) the bt500 Bluetooth on my Photosmart C5580 all-in-one printer. Linux "Isadora" recognized it in an instant, showing the printer's IP address. Security setting is set to "Low" and "View by All" is set in "Setup." Even manually typing in IP address does not seem to work. Am I missing something here?

Far be it from us to argue with success!  Congrats on finding a solution.  :-)
WyreNut 
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

  • My new backbeat GO 2 is not recognized by bluetooth service on my ipad mini with ios 7.0.4! Could you help me?

    My new backbeat GO 2 headset is not recognized by bluetooth service of my new ipad mini with ios 7.0.4! It doesńt appear in the list of bluetooth devices. It was working on previous versions! What happens? Could someone help me? Thanks!

    There are a ton of posts on this already if you search the forums.In short...
    Delete all Bluetooth profiles from your device. Do the same if your Bluetooth devices allow for that.
    Setting > Reset Network Settings
    Reset your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
    Repair your devices
    Try again to see if the problem persists.

  • When i connect my iphone 5 to my pc using the usb cable, my device is not recognized yet when connected to a power source, it charges normally. What should i do to rectify the problem and read sth about debris being in the usb. How do i remove that?

    When i connect my iphone 5 to my pc using the usb cable, my device is not recognized yet when connected to a power source, it charges normally. What should i do to rectify the problem and read sth about debris being in the usb. How do i remove that?

    iOS: Device not recognised in iTunes
    Windows: http://support.apple.com/kb/TS1538

  • After upgrade my keyboard is not recognized by Bluetooth

    I just saw an upgrade notice come up on my computer so I hit install etc. Now my iMac 15" is updated to OS X 10.9.3 but the keyboard is no longer recognized by Bluetooth. The green light on keyboard keeps blinking green but it never connects. Any suggestions to help me? Glad I have another Mac to type on in the meantime.

    If that doesn't work try pushing the Bluetooth sing in the top bar of your computer screen
    There should be a list of all Bluetooth devices
    Click on the name of your keyboard and then on connect

  • Re: "USB device not recognized​." "The connection between your device and the desktop could not be establishe​d. Please check your setup and try again." Tungsten E2

    Have had my Tungsten E2 for 3 years...I always use cable to Hotsync, and the last few weeks it has worked only intermittently. Either the device is not recognized, or it starts the HotSync and then freezes.  I have checked out various online suggestions but then discovered that the only thing that seems to  work is to exit Hot Sync Manager, then restart it again each time - then Hot Sync seems to work fine - a temporary solution! I don't have Bluetooth capabilities.  I can't figure out if I need a new cable, a new OS (have Vista), a new laptop (only 2 years old) or a new Palm!  Any suggestions? Thanks!
    Post relates to: Tungsten E2

    Hello!
    The next time that happens, USB device not recognized error, unplug the cable from the PDA and pc, then soft reset the device, then plug the PDA back in and see wat happens. 
    Post relates to: Treo 650 (Unlocked GSM)

  • Phone not recognized and says connect to itunes

    iPhone 4s is not recognized by Windows 7, or itunes after update to itunes 10.7. Iphone screen shows usb cable and iTunes icon, saying connect to itunes. I have uninstalled and reinstalled, all itunes programs via the instructions on TS1538.
    Nothing is working.

    http://support.apple.com/kb/HT1808

  • "USB Device Not Recognized" Message when connecting iPod Nano

    I get the following windows pop up when connecting my son's iPod Nano
    *"USB Device Not Recognized"*
    *One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.*
    I have successfully connected this device to this computer before so I don't know what has changed.
    Message was edited by: ipodnannouser

    This did not work for me. I have a laptop that was running Windows XP, and it had no problems recognizing the iPod. I was having problems with XP, and rather then reinstall XP, I did a clean install of Vista. I did a settings transfer, so the new install of iTunes came already configured--I mention this since I don't know if it was a factor.
    When I plugged in the iPod, I got the USB Device Not Recognized. The usbstor.inf file did not fix the problem. However, the solution at http://www.winvistabeta.com/groups/275128/ipod-usb-device-not-recognized/message .aspx did fix the problem. Do this:
    Reset the iPod:
    1. Unplug the iPod.
    2. Turn the hold switch to HOLD and then back to off.
    3. Hold the Center and Menu buttons for 6 seconds until you get the Apple logo when you release them.
    4. Plug in the iPod. It should now be recognized.
    This worked fine for me the first time. Thanks! Jack

  • "USB device not recognized." "The connection between your device and the desktop could not be established. Please check your setup and try again." Tungsten E2, Outlook 2007

    Hi,
    I am running XP SP 2, on a Dell Vostro 1000, Palm OS Garnet v5.4.7 on a Tungsten E2. I have worked though issues relating to synchronization, Outlook 2007, Docs to Go, etc., in the past.  Thank you board members! 
    Once I worked thru all the initial problems, my Tungsten E2 was sync' ing beautifully to my laptop until a few days ago.  There have been no changes (I know of) to the configuration, but now I receive  "The connection between your device and the desktop could not be established.  Please check your setup and try again."  On the laptop I sometimes get  "USB device not recognized."  I am unclear why I get the PC message sometimes and not others.   
    I have tried the following: (not necc exactly in this order)
    Double checked Hot Sync Mgr settings: Local USB (ver. 6.0.1)
    Reset the Palm (multiple times)
    Rebooted the laptop  (multiple times before and after the Palm resets)
    Went to Support Libraries including http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=57,E=0000000001060189973,K=9550,Sxi=3,Case=Obj(3695...)
    and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(1409) 
    Followed the steps in "Start Here" found at  http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=26057 
    Moved Backup directory as per a post on this forum
    Looked for a deleted a file called "Graffiti_ShortCuts_____________" per a post on this forum
    Followed the steps in HotSync troubleshooter guide you can run through located on
    http://kb.palm.com
    Went into Device Manager - found it shows no yellow ! 's
    Followed Device Mgr Troubleshooter - went all the way thru with no solution 
    Tried all four USB ports - the PC's bell-like tone does not sound when I disconnect or reconnect the Plam's cradle like it does when I conn/disconnect other USB devices -I think that is a clue.    ...? 
    Cleaned the Palm's contacts (and cradle's contacts with a old, dry toothbrush)
    Read all the posts under "USB device not recognized." 
    OK, I'm at a loss, can anyone help me?  Many thanks in advance! 
    ~Bob
    Post relates to: Tungsten E2

    Hello!
    Using a cradle with the Tungsten E2?  Tried bypassing the cradle and just use the hotsync cable?  Tried a different computer yet?  Somehow, the PC is having problems getting a signal from the device.  I assume you have the laptop charger plugged into the laptop during this?  Not going through a docking station or port-replicator.
    One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop.  This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time.  Keep me posted.
    Post relates to: Treo 650 (Unlocked GSM)

  • USB Device Not Recognized when Iphone connected to PC

    Hello,
    Every time I connect my Iphone 4S to my PC I get the error "USB Device Not Recognized". I did not have this problem before. I tried uninstalling Itunes and all its components and reninstalling it, restaring my computer, restarting Iphone and I even reset all the setting on my Iphone. I connected my wife's Iphone 4 using the same cable and PC and connected and started syncing with Itunes right away. If anyone has any pointers on how to fix this problem, any help will be much appreciated.

    try reseting the phone
    RESET DEVICE
    Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).

  • Google Play Music not playing on Bluetooth connect

    I have a SONY E2033 EG4 DUAL, I used to have a Samsung S5. On my Samsung and all other Android phones I have had, my music playlist would auto-start once connected to the car bluetooth. From a google search (ie, "android autoplay music bluetooth") all listings are how to prevent Auto-Play, so I assume this is the default behaviour. With my SONY phone, I literally have to pull the phone out of my pocket, start Google Play and hit Play. The car controls do not work by default. The bluetooth connection is working OK, but for some reason the controls are not being forwarded to Google Play Music until I start the app manually. Is there another SONY app which is taking the requests by default ? How can I override this behaviour ?

     Check the SmartConnect settings

  • I have just got iPhone 5s and it does not show any Bluetooth connections, my friends with the same phone have no problem my iPhone 5 has no problem there is nothing else connected to the speakers etc

    Need help with Bluetooth I can not see anything

    Hello Jameshawkins1
    Check out the troubleshooting article below for dealing with connections with Bluetooth.
    iOS: How to troubleshoot Bluetooth connections
    http://support.apple.com/kb/TS4562
    Regards,
    -Norm G.

  • Latest iTunes 10.1.1 for Windows 64-bit NOT recognizing iPhone 4...***?!

    Hey All,
    My iPhone 4 is not being recognized by my brand new PC laptop - Dell Studio 1558 with Windows 7 (64-bit).
    Each time I attempt to synch the iPhone 4 with the PC, I get the same error message below:
    "This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes."
    I've installed and uninstalled and installed and unistalled latest iTunes 10 (64 bit version) and keep getting this error message above.
    Surely this can't be an overall iTunes 10 glitch with the iPhone 4?!?! When does next version come out? Apple staff has been unable to help me so I thank anyone in advance who has a solution for this. Happy New Year =)
    -josh

    I've also got a similar problem. I upgraded yesterday & today I find (mainly with previously purchased tracks) that iTunes only playes about 51sec of a track. The whole track plays when using "Quicktime" but this doesn't help me when I'm trying to put together a playlist.
    Can anyone out the help?

  • ITunes in Windows XP 64 bit not recognizing my iPod Touch

    I recently switched to XP 64 bit and after much much messing around I finally got itunes installed and running (how is a whole nother thread's worth that I'll see about answering later). But now it won't recognize my iPod Touch. Any suggestions on how to make this happen?

    I did a restore. Not from backup, though, as I had not done a backup prior to the restore. However, in the process of the restore, it asked if I wanted to back up and I said yes.
    The restore concluded, and then it asked if I wanted to put the backed-up stuff back on the iPod, and I said yes.
    Then I did the sync. It seemed to be working. It went through 3 steps and stayed on step 3 for a while. Then it ended, and there was nothing on the iPod. The "Music" button opens a screen that says "no content."
    Then I did a sync test from Help->Diagnostics. This is what was displayed on the command window:
    Performing Sync Diagnostics for iTunes
    reporting PE file versions
    reporting time zones
    Enabling Sync Logging
    Starting Sync
    2013-03-13 02:59:11.896 syncli.exe[3188:e6c] setting one shot sync group for client con.apple.MobileSync.6f93c87e3101b680446936d817872280c801eb54
    2013-03-13 02:59:11.956 syncli.exe[3188:e6c] no registered client con.apple.MobileSync.6f93c87e3101b680446936d817872280c801eb54
    Waiting for Sync to finish
    ...Disabling Sync Logging
    The test ended "successfully" (with a green light, etc).
    Don't you think that "no registered client con.apple.MobileSync.blahblahblah..." is significant? Seems like it was unable to do the sync because some program or process or whatever was missing.
    So, still not synching. Is there anything else I can try? Thanks...

  • Win 7 network adapter not recognized

    I installed windows 7 through bootcamp. Now it does not recognize the network adapter to connect to the internet. It is asking to install drivers. Any idea where can I find drivers to connect to the internet? I also tried connecting the ethernet cable and it did not work. Thanks.

    Just to be sure I understand.
    Do you have Windows 7 installed on a Boot Camp partition on your MacBook Air? If so,
    Which exact version of OS X and Windows 7 are you using?
    Which version of Boot Camp (3.0 or 4.0) are you using?
    Did you partition the MacBook Air's internal HDD using the Boot Camp Assistant?

  • Scroll option on TouchPad on Aspire AO756 Win 7 64 bit not working

    I installed the software from the website of Acer (Sinaptics), but no option for skrul button.

    pip1951,
    If it was working, did you try a system restore to when it worked properly? It could be that something installed incorrectly, such as Windows Updates, for example.

Maybe you are looking for

  • IPad and Aperture - photo deletion and/or editing

    Hi all, I'm a new happy user of an iPad 2, and as I am also a user of Aperture, I was wondering if there is a way to delete photos from my iPad and thus from my Aperture. I have sooooo many photos that I want to delete, and I would love it if there w

  • Item Rendering component

    In my datagrid I used Inline item rendering to create text link. code is given <mx:DataGridColumn headerText="Nomenclature">             <mx:itemRenderer>                  <mx:Component>                       <mx:Label htmlText="<u>{data.NOMENCLATURE

  • Import Templares from Motion to DVDSP?

    I can't find a template in DVDSP that is appropriate for my subject, but can find several in Motion that fill the bill. Is it possible to import a Motion template into DVDSP in a way that converts it to a useable file in DVDSP? If so, what are the st

  • What is the use of E/F tables?

    What is the use of E/F tables?

  • Jcontrol.exe error

    Hello All, I installed the Test Portal server in my local machine. But once i stop my server and again i am starting server then i am getting jcontrol.exe is stopped. for that what i need to do ? is any configuration is required ? can you please help