Win 7 64 bit vs Desktop OS 6.2.2 and my Centro
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!
There is no update to do a wired sync (yet).
It is worth it to get a bluetooth dongle (Probably a tiny one) to use with your laptop (They're less than $15 on most good online retailers) and sync that way.
You can use XP Mode, but it's a hassle because you need to tell it that no matter what USB port you plug your Centro into, it needs to go to XP, then you need to have your calanders synced between XP and 7. Just get the Bluetooth dongle. (I have about 4, great little buggers for everything, not just a hotsync)
Garnet OS is OS 5.x.x (What a Palm T|X runs (can't comment on any other devices because I only own the T|X))
Access doesn't care anymore about the Hotsync situation. It's more in the hands of the community to develop a x64 driver and get it signed by something to have it work properly. Beyond that, You're stuck with bluetooth (which personally, is nicer. No need to have my cord everywhere if I want to back up data or install a new program. One less thing to drag around since my dongle is constantly plugged into my laptops)
Plus, $15 is cheaper than a new phone with a 1+ year contract and the headaches of learning a new OS.
-Pizzaboy192
Similar Messages
-
in which boot camp support software I can install the drivers for win 7 32 bit.
my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers.
also my macbook pro model is MC723.Read this. You need to be running Snow Leopard or later.
http://support.apple.com/kb/ht3986 -
Do you plan on supporting 64-bit Mac desktop applications and ANEs with the captive runtime?
I was wondering if Adobe plans to support 64-bit Mac desktop applications and ANEs with the AIR runtime using captive setup?
On 01/11/2011 16:39, Simon Flood wrote:
> So I have an iMac (4,1) running Snow Leopard.
>
> I tried installing the 32-bit Mac agent and it complained
>
> Package intended for 32 bit architecture
> Exiting with error code 237.
>
> so I installed the 64-bit agent - it was happy.
>
> I then logged out and back in to activate the agent but it isn't happy -
> I get a ZENworks Adaptive Agent dialog popup with the error "Cannot load
> 64-bit SWT libraries on 32-bit JVM".
>
> $ java -version
> java version "1.6.0_26"
> Java(TM) SE Runtime Environment (build 1.6.0_26-b03-384-10M3425)
> Java HotSpot(TM) Client VM (build 20.1-b02-384, mixed mode)
> $ uname -a
> Darwin <host>.<domain> 10.8.0 Darwin Kernel Version 10.8.0: Tue Jun 7
> 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386 i386
>
> System Software Overview in System Profiler has No recorded against
> 64-bit Kernel and Extensions.
>
> So yes Java is 32-bit but so is Mac OS X.
>
> Q1) How can I uninstall the (64-bit) Mac agent?
>
> Q2) Should I be installing the 32- or 64-bit Mac agent?
>
> I'm thinking I should be installing the 32-bit Mac agent so
>
> Q3) How can I install the 32-bit Mac agent?
For anyone following this thread I've now logged bug #728888.
Simon
Novell Knowledge Partner (NKP)
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Novell Technology
Transfer Partner (TTP) program. See novell.com/ttp for more details. -
Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple
It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly. -
Aim to process all files in folders on desktop to run through photoshop and save in multiple locations
Part one:-
Gather information from desktop to get brand names and week numbers from the folders
Excluding folders on desktop beginning with "2" or "Hot"
Not sure about the list of folders
but I have got this bit to work with
set folderPath to "Hal 9000:Users:matthew:Desktop:DIVA_WK30_PSD" --<<this would be gained from the items on the desktop
set {oldTID, my text item delimiters} to {my text item delimiters, ":"}
set folderName to last text item of folderPath
set my text item delimiters to "_WK"
set FolderEndName to last text item of folderName
set brandName to first text item of folderName
set my text item delimiters to "_PSD"
set weekNumber to first text item of FolderEndName
set my text item delimiters to oldTID
After running this I have enough information to create folders in multiple locations, (i need to know where they are so that photoshop can later save them in those multiple locations
So I need the following folders created
Locally
Hal 9000:Users:matthew:Pictures:2011-2012:"WK" + weekNumber
Hal 9000:Users:matthew:Pictures:2011-2012:"WK" + weekNumber: brandName
Hal 9000:Users:matthew:Pictures:2011-2012:"WK" + weekNumber: brandName: brandName + "_WK" + weekNumber + "_LR" --(Set path for Later)PathA
Hal 9000:Users:matthew:Pictures:2011-2012:"WK" + weekNumber: brandName: brandName + "_WK" + weekNumber + "_HR"--(Set path for Later)PathB
Network
Volumes:GEN:Brands:Zoom:Brands - Zoom:Upload Photos:2012:"Week" + weekNumber
Volumes:GEN:Brands:Zoom:Brands - Zoom:Upload Photos:2012:"Week" + weekNumber:brandName + "_WK" + weekNumber + "_LR" --(Set path for Later)PathC
Volumes:GEN:Website_Images --(no need to create folder just set path)PathD
FTP (Still as a normal Volume) So like another Network
Volumes:impulse:"Week" + weekNumber
Volumes:impulse:"Week" + weekNumber:Brand
Volumes:impulse:"Week" + weekNumber:Brand:brandName + "_WK" + weekNumber + "_LR" --(Set path for Later)PathE
Volumes:impulse:"Week" + weekNumber:Brand:brandName + "_WK" + weekNumber + "_HR" --(Set path for Later)PathF
I like to think that is end of Part 1
Part 2
Take the images (PSD's) from those folders relevant to the Brand then possibly run more applescript that opens flattens and then saves it in the locations above.
For example….
An image in folder DIVA_WK30_PSD will then run an applescript in Photoshop, lets call it DivaProcessImages within this we then save to PathA, PathB, PathC, PathD, PathE, PathF the folder path of C should therefore look like this
Volumes:GEN:Brands:Zoom:Brands - Zoom:Upload Photos:2012:Week30:DIVA_WK30_LR and of course save the image as original filename.
Then from the next folder
An image in folder Free_WK30_PSD will then run an applescript in Photoshop, lets call it FreeProcessImages within this we then save to PathA, PathB, PathC, PathD, PathE, PathF the folder path of C should therefore look like this
Volumes:GEN:Brands:Zoom:Brands - Zoom:Upload Photos:2012:Week30:Free_WK30_LR and of course save the image as original filename.
The photoshop applescript i'm hoping will be easier as it should be a clearer step by step process without any if's and but's
Now for the coffee!!Hi,
MattJayC wrote:
Now to the other part, where each folder was created (and those that already existed) how do I set them as varibles?
For example,
set localBrandFolder_High_Res to my getFolderPath(brandName & "_WK" & weekNumber & "_HR", localBrandFolder)
This line was used to create more than one folder as it ran though the folders on the desktop. The next part is I will need to reference them to save files to them.
You can use a records
Examples
if you want the path of localBrandFolder_High_Res of "Diva", if "Diva" is the second folder of the Desktop
You get the path with this : localBrandFolder_High_Res of record 2 of myRecords
if you want the path of localWeekFolder in the first folder of the Desktop
You get the path with this : localWeekFolder of record 1 of myRecords
Here is the script
set myRecords to {}
set dtF to paragraphs of (do shell script "ls -F ~/Desktop | grep '/' | cut -d'/' -f1")
repeat with i from 1 to number of items in dtF
set this_item to item i of dtF
if this_item does not start with "2_" and this_item does not start with "Hot" then
try
set folderPath to this_item
set {oldTID, my text item delimiters} to {my text item delimiters, ":"}
set folderName to last text item of folderPath
set my text item delimiters to "_WK"
set FolderEndName to last text item of folderName
set brandName to first text item of folderName
set my text item delimiters to "_PSD"
set weekNumber to first text item of FolderEndName
set my text item delimiters to oldTID
end try
try
set this_local_folder to "Hal 9000:Users:matthew:Pictures:2011-2012"
set var1 to my getFolderPath("WK" & weekNumber, this_local_folder)
set var2 to my getFolderPath(brandName, var1)
set var3 to my getFolderPath(brandName & "_WK" & weekNumber & "_LR", var2)
set var4 to my getFolderPath(brandName & "_WK" & weekNumber & "_HR", var2)
--set up names to destination folders and create over Netwrok including an already exisiting folder
set this_Network_folder to "DCKGEN:Brands:Zoom:Brand - Zoom:Upload Photos:2012:"
set var5 to my getFolderPath("WK" & weekNumber, this_Network_folder)
set var6 to my getFolderPath(brandName, var5)
set var7 to my getFolderPath(brandName & "_WK" & weekNumber & "_LR", var6)
set website_images to "DCKGEN:Website_Images:"
--set up names to destination folders and create over Netwrok for FTP collection (based on a mounted drive)
set this_ftp_folder to "Impulse:"
set var8 to my getFolderPath("Week" & weekNumber, this_ftp_folder)
set var9 to my getFolderPath(brandName, var8)
set var10 to my getFolderPath(brandName & "_WK" & weekNumber & "_LR", var9)
set var11 to my getFolderPath(brandName & "_WK" & weekNumber & "_HR", var9)
set end of myRecords to ¬
{localWeekFolder:var1, localBrandFolder:var2, localBrandFolder_Low_Res:var3, localBrandFolder_High_Res:var4, networkWeekFolder:var5, networkBrandFolder:var6, networkBrandFolder_Low_Res:var7, ftpWeekFolder:var8, ftpBrandFolder:var9, ftpBrandFolder_Low_Res:var10, ftpBrandFolder_High_Res:var11}
end try
end if
end repeat
localBrandFolder_High_Res of record 2 of myRecords -- get full path of localBrandFolder_High_Res in the second folder of Desktop
on getFolderPath(tName, folderPath)
tell application "Finder" to tell folder folderPath
if not (exists folder tName) then
return (make new folder at it with properties {name:tName}) as string
else
return (folder tName) as string
end if
end tell
end getFolderPath -
Using wls 10.3.6 (32 bit) in oracle 11 g r2 forms and report installtion
hi all,
i was have jdeveloper 12 c on my laptop win 8 64 bit ,
i remove all files for jdeveloper like middleware and javadeveloper
after that i install wls 10.3.6 (32) bit to install oracle 11 g r2
and it's installition going while
but in installing oracle 11g r2 forms and report when i choose the middleware of it error appear said :
INST-07408: Unable to install or configure the product on a 32-bit JVM on a 64-bit machine" error messag
i do not know what can i do
as iam littel experince in oracle so plz any one write solution pleaze tell me the steps for solution step by step
and any one refer for any something need to setup plz refer to the exact link
thanks and regardsFirst, Windows 8 is not a supported platform for installing Forms/Report 11.1.2
Second, if you are running a 64-bit platform then you need to install the 64-bit software. Also, before you perform any part of the installation, you will need to first install an appropriate JDK (64-bit if the OS is 64). So in short, I would recommend you read the installation instructions and certification guide before starting. Those documents can be access from here:
http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html
http://docs.oracle.com/cd/E38115_01/index.htm
Generally speaking the installation process is simple. Here are the basic steps:
1. Know your operating system and machine. You must understand the OS with which you are working. Is it 64bit or 32, is it an Oracle certified platform for the software you want to install, does your machine have enough RAM installed, etc.....
2. Install JDK version 6. Be sure to use 64bit if your OS is 64 or 32 if your OS is 32. Do not use Java 7 for the installation
3. Ensure that your machine has a static IP address. If it does not, install and configure the Windows Loopback Adapter.
4. Install WLS 10.3.6
5. Install FMw Forms/Reports 11.1.2.1
Although the above steps seem simple, I recommend you review the documents I mentioned before starting any installation. -
Palm Desktop 6.2 with drivers and hot sync will not install
My new computer has dual quad core processors (8 processors), 8 GB RAM, Vista Ultimate 64 bit.
The Palm Desktop and Hot Sync manager will not load because the New Hardware Wizard cannot find the drivers for the Palm Centro even when I point the wizard to C:/Program Files (X86)/Palm/USB-drivers.
Is the Palm Desktop software compatible with Vista Ultimate 64 bit?
The software loads just fine and operates well on my quad core,2GB RAM, Vista Home Premium 32 bit.
Post relates to: Centro (Sprint)rsmilski wrote:
I have a Core 2 Duo CPU - I have a dual core, no? I keep running into failed installs of HotSync.
Is there a way of installing Hotsync using Bluetooth?
Thanks
Post relates to 700p (Bell)
Post relates to: Palm m125
Please see Palm's instructions for syncing via Bluetooth. This article is for a Centro, but should be similar to your 700p.
http://kb.palm.com/SRVS/nua/launchKB.asp?c=49229
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked! -
i just downloaded AOL Desktop 1.7 for Mac and I can't get my email to work. It welcomes me but I know I have new email but it doesn't recognize that I have ANY mail at all. HELPPPPPPPP Please
Hey I've been all over and can't get any help. I'm well aware its not an Apple product but its an app for Mac OS so I thought I'd try here. I bought 2 new iMacs yesterday for my parents (5K) and I'm just trying to get them some help as there in their 70's and AOL is all they know.
But hey thanks for your help, -
In my Macbook Pro, on a few occassions, the apple menu bar blacks out. its displayed as a negative image. The desktop wallpaper get greyed out and i get a blank screen as wallpaper. No idea why this happens. I reset the system and issue gets resolved.
AshwinVC wrote:
I reset the system and issue gets resolved.
How? -
We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double clicked in Mac 10.6.7 at out clients location, its not opening. For your information the client is able to open this same application by double clicking on index.swf file. The main problem is that client is not able to open the application using index.app file at their office whereas we are able to do so at our office. Can anyone give some suggestions to sort this problem?
The most common reason is different versions of Flash, or different versions of web browsers used. Some users may elect to not have Flash installed at all because of the processor overhead of Flash. If you are going to make an application for a client, check what operating system and browser versions they are using first. Then determine if a stand alone application is required, or if they have the necessary plugins to run specific browser enhanced code.
P.S. MAC is an acronym for Media Access Control. Mac is the shorthand for Macintosh, the operating system and computers made by Apple Inc. -
Whenever I lock my screen on my mac (by closing the lid) the login screen I see on reopening my computer is a faded version of my desktop image (which is normal, and fine) however when I close my laptop while it's in fullscreen mode (when I'm using a web browser or other application in full screen) the lock screen displays the default desktop image, which is what i'm trying to change. My macbook has always done this.
My computer is running Mac OS X version 10.7.3
I've been looking for a way to change the default wallpaper on my mac, so that when i lock my screen in full screen mode the lock screen displays my selected wallpaper image (the same one as is on my desktop) instead of the default (andromeda galaxy). Can anyone please provide me with the location of the default image file (if it's even accessible) or maybe even provide me with a way to fix this? Any help is greatly appreciated!Hi Mr. Wog,
My guess is that once you see an estimate for replacement for hundreds of dollars, those scratches won't look too bad anymore. There are products to cover the outer casing, and some people put stickers on, or even paint (I don't recommend either, but ymmv). Good luck. -
When I replaced my PC desktop with a Mac Mini and hooked up my HP printer to it, I discovered that my other computers on the Wi-Fi network could no longer access the printer. The manual says Maverick OS will not allow PC's to share the printer. Does anyone else have this problem? My printer does not have on-board Wi-Fi but, otherwise, works fine. I shouldn't have to buy a new one. Is there a OS patch out there that would open the printer port for my PC computers?
I'm assuming that on the Mac, the System Preferences -> Sharing -> Printer Sharing -> [X] HP printer -> Everyone can print is selected? That is to say, the Mac will allow anyone to print using the printer, and that you did not try to restrict who can print.
How is your network configured? Bonjour as a protocol will NOT cross a router boundary. If you have 2 or more subnets active with the PCs on one subnet and the Mac on another, that would block the PCs from seeing the Mac.
You could have multiple subnets if you have more than one router, such as an ISP provided broadband modem/router and another WiFi Router. If the PCs are talking to one router and the Mac is talking to another, that could be a 2 subnet situation. The additional routers must be put into bridge mode, which is done differently depending on the router. But the basics are to diable DHCP and NAT services on the secondary router(s) having just one active router on the network.
Also, using Bonjour Browser on my Mac, it is showing me that the printer is being advertised as using Internet Printing Protocol, so if that is something selectable on Windows, maybe you can bypass Bonjour on Windows. -
With my taking any action, my folders and files no longer appear under documents (under Places). Now a folder titled Documents has appeared on my desktop with all my files and folders. What happened?What happened?
The way I moved from 10.3.9 to 10.5.8 was to use "ditto -rsrc" and copy the user homes and the data share to an external firewire drive. Then did the same in reverse.
I found the key to data and share permissions to make sure that the users had the same UID in Leopard that they had in Panther.
You can then use "sudo rm -rf" to remove any folder from the relocated homes that you want. Remember if you do choose to remove "~/Library" from each users relocated home, you will be removing any iCal calendars, login.keychains, browser bookmarks, custom screensavers and wallpapers, etc.
Users don't really care if they can login and do any work. But there will be much wailing, gnashing of the teeth, and anxiety, if they lose their bookmarks and wallpaper. -
I'm using Windows 7 64 bit. I downloaded iTunes for Windows and setup an account. How do I stream a TV show to the TV in my bedroom? I have a Belkin router. My TV has many site Icons, e.g. Netflix, hula etc. from which I can download and watch movies in my bedroom. But the iTunes icon doesn't appear?
I'm using Windows 7 64 bit. I downloaded iTunes for Windows and setup an account. How do I stream a TV show to the TV in my bedroom? I have a Belkin router. My TV has many site Icons, e.g. Netflix, hula etc. from which I can download and watch movies in my bedroom. But the iTunes icon doesn't appear?
-
Hi, the problem of deleting files / videos seeds desktop to go into Terminal and then sudo rm-rf ~ /. Trash Pohangina the answers I've had e of someone in her forum but when I write procedures line in Terminal as the Krever my password and it can not write anything there, I write but nothing comes and my problem is not löst.När I want to delete the movie / video image Frin desktop still arrive Finder wants to make changes.Type your password to allow this. But even that I type my password file / video is left I need help in an easier way or another set-even those on the terminal that I can not type my password to solve the problem Regards Toni
If you want to preserve the data on the boot drive, you must try to back up now, before you do anything else.
There are several ways to back up a Mac that isn't fully working. You need an external hard drive to hold the backup data.
1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Maybe you are looking for
-
Since upgrading to Windows 8.1, iTunes no longer recognizes my iPhone or iPad. I tried to reinstall iTunes. That did not address my problem. Any suggetions on what I should do?
-
Weblogic server License infromation
I have the Weblogic server 9.2 version License, Now Should I have to purchase new License for the *9.2 MP2 ?* I have the License for the 9.2 , but I do not have the License for MP2, From where can I get the same ? should I go for the , BEA WebLogic S
-
I would like the details to be populated on the Originals tab and have verified that the 'content version' is checed off for all my document types, and it is...is there something else that needs to be done/configured in order for the Status Txt / Use
-
[G505s]Trouble connecting to internet (wireless)
Hi everyone, I am having some trouble with my laptop, at home where I use this device I always use a wireless connection. My phone, Nintendo systems and XBOX have no problems with it. But for some odd reason my laptop has only two of the 5 stripes of
-
Mp4 movies with h264 codec on iPhone
I've been converting DVDs to mp4 format to take on my iPhone on vacation. I can get the mpeg-4 codec movies to download and play on the iPhone, but I can not get mp4 movies created with the h264 codec to download to the iPhone from iTunes. The messag