Win 7 AVMS_APP_2.0.2.1 After Install getting Error Assertion Failed

Hi I've installed the Cisco Video Monitoring System on 2 of the desktops running Windows 7 pro Sp1 but when i try to run Main Console I keep getting Assertion Failed Error even if I right click and Run as Administrator and UAC is disable, After clicking on Ignore button few times , then VMS will close by itself.
details of the error windows:
Assertion Failed
Program:...
File:\..\..\Src\Util\NuCrtLocale.cpp
Line:61
Expension:0
For Information on how your program can cause an assertion failure, see the Visual C++ documents on assert
(Press Retry to Debug the application - JIT must be enable)
My windows is up to date and checked all MS Visual C++ 2005 , 2008, 2010 is installed in control panel/programs and features, I've no problem accessing the WVC210 camera via web browser. I've also tried uninstalled and reinstall VMS few times Run as Admin but still getting same error. Please kindly help how can I fix this problem. Thanks in advance !
CN

Try applying the following OSS Notes:
[OSS Note 1050275 - ASSERTION_FAILED in CL_RSTRAN_FOBU_APPL->GET_CODE|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1050275] (relevant to prior to BI 7 SP14)
[OSS Note 1115923 - Check or transfer of empty formulas causes runtime error|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1115923] (relevant to prior to BI 7 SP17).

Similar Messages

HT1349 Win 7 64 bit: iTunes won't install, get error code 2324 or installer says I am not logged on as administrator: only one user and it is an administrator user.

Win 7 64 bit: iTunes won't install, get error code 2324 or installer says I am not logged on as administrator: only one user and it is an administrator user.

Hey there k8ei,
Thank you for using Apple Support Communities
I found this article for you to help troubleshoot installing iTunes named Trouble installing iTunes or QuickTime for Windows found here http://support.apple.com/kb/HT1926.
Here is a general overview on where the troubleshooting will take you:
General installation troubleshooting
1. Empty your Temp directory and restart
2. Completely remove iTunes and related components
3. Install the latest version of iTunes
Additional troubleshooting
After performing each of the steps below, you will need to completely remove iTunes and related components and then install iTunes again to determine whether the issue is resolved.
1. Make sure you have administrator account access
2. Make sure your folder names don't contain strange characters
3. Get the latest Windows updates
4. Disable other conflicting software
All the very best,
Sterling

Starting PI after install getting error in management console

Fresh install of PI 7.1
Starting from inside management console:
See syslog entry
FATAL Native layer fro Jco is too old guarantee correct behavior Found version 711.121 require 711.134.
I would have assumed that the install package would contain correct version for starting J2EE engine.
Any Ideas?
Downloaded newest version from SAPMARKET place but trying to find the directory to replace files ?
sapjco3.jar
Thanks
Edited by: FC7600 on Jun 24, 2011 1:31 AM

Hi Checkout this link ..
http://fuller.mit.edu/spring/jco_install.html
It might be helpful for you ..
Deepthi Kuchimanchi

I can't open InDesign (CS4 Design Standard) after installing, says: "Error: 5"

I can't open InDesign (CS4 Design Standard) after installing, says: "Error: 5" <--- What does this meen?

do this, Configuration error 16 | CC, CS
and then reinstall

SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory

SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory
after retry..again SharePoint Designer requires the following component require to install Microsoft.NET framework version 4 i have downloaded and try to installed but fail not work please answer what to do?
Thanks and Regards, Rangnath Mali

Hi Rangnath,
For running SharePoint Designer 2013, you need to install Microsoft .NET 4.0 Framework or higher.
Please uninstall the Microsoft .NET 4.0 Framework, and install it again. After that, reboot your machine.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

I had my hard drive cleaned and cannot install cs6 master collection from disk. I am getting error message failed to initialize. please download adobe advisor support. I have a pc and am using windows 8

I had my hard drive cleaned and cannot install cs6 master collection from disk. I am getting error message failed to initialize. please download adobe advisor support. I am using a pc and have windows 8. Please help.

start at the top and work your way down applying applicable fixes until your problem is resolved.
if cc (win): https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html
if, your error is:
"Installer failed to initialize. File not found." or "Installer failed to initialize. This could be due to missing files."
first, rename OOBE Folder to OOBE.old.
to find OOBE:
64 bit win OS: Program Files x86\Common Files\Adobe\OOBE
32 bit win OS: Program Files \Common Files\Adobe\OOBE
mac os: HD>library>application support>adobe>caps
mac os: USER>library>application support>adobe>OOB
if that fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.
if you're using a dvd to install:
copy the disc contents to a desktop directory and install from that directory.
if you're using a mac:
1. Try to Create a new user account in Mac with Administrator Priviledges.
2. Login to the New user, Navigate to Mac HD> Application> Utilities> Adobe Installer folder, Locate products like Adobe Reader, Adobe Flash, Adobe Air and un-install them
3. Navigate to User Library> Application Support> Adobe and move Adobe to Trash.
4. Navigate to Mac HD> Library> Application Support> Adobe and move Adobe to Trash.
5. Start the installation again.
if everything applicable above fails, check your installation logs:
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-install-using-logs-elements.html

Send mail after jobs get succeeded or failed in EM console ?

Hi,
Is there solution to send mail after jobs get succeeded and failed in EM console. if job get failed in em console the mail should send with error code

Hi,
For dbms_scheduler this ability is built-in from 11.2 and up. For EM jobs, you might want to ask on the Enterprise Manager forum here
Enterprise Manager
Thanks,
Ravi.

Win XP finds no audio device after installing Audigy 2

After installing Audigy 2 ZS, my Windows XP could no longer identify an audio device. Under Control Panel > Sounds and Audio Devices, clicking on the Audio tab, there is no Default Device for playback or whatsoever.
However, under the Hardware tab, Audigy 2 ZS is visible and seems to work fine. The only suspicious part I caught is that when I check for Properties of Audigy 2 ZS and go down to check Properties of Creative Audigy Audio Processor (WDM), the status shows "The di'ver is enabled but has not been started." I have no idea how this can be fixed.
The integrated sound card is turned off in the BIOS.
I've tried all possible ways to install, uninstall, install..., but just couldn't get XP to work properly. Any other possible solutions out there?
Many thanks!

Solved after reinstalling Win XP. Wasted too much time on trying other possible solutions.
Hope other people may learn something out of it.

TS1394 After installing maverick, microsoft entourage fails to load due to "PowerPC applications no longer supported." Now what do I do to get my email back ?

After installing OS X 10.9.1 maverick, my email program, microsoft entourage, fails to load because "PowerPC" no longer supported. What do I do now ?

I've been holding off upgrading to Mavericks until I feel like I've identified the problems I'm most likely to encounter and have a solution for them. This concerns me, becasue I thought Office 2008, including Entourage, was good to go. It's very definitely not a PPC application - I'm running it on Lion (which can't run PPC programs), and Activity Monitor identifies it as Kind=Intel. Is the issue that Mavericks is misidentifying Entourage 2008 as a PPC application?
srb

After installing MAWI error ORA-01031 when trying to connect as sysdba

I've installed mawi 2.18 on a brand new 10.2.0.5 ORACLE_HOME.
After installing the patch i cannot connect anymore to the database as sysdba: the error i got is:
ORA-01031: insufficient privileges
If i unset TWO_TASK (as stated in mawi install procedure) and replace it by ORACLE_SID it works.
What's the correct setup to handle both sysdba connection and MAWI setup ?
thanks
Chris

You could create two seperate env files. The EOF.env for TWO_TASK access and then another env file of yoru choice for SYSDBA access replacing TWO_TASK with ORACLE_SID and depending on whether you are using sysdba access or regular MW access you would execute the correct env file. I would also place the SYSDBA env file in the actual ORACLE_HOME directory.

Deployment failure after installing SP11 - Error in Compiling Flex App

After installing SP11 for Visual Composer, I am now not able to deploy any of my models, even though they compile successfully. The following was installed:
VCBASE11_0-10003602.SCA
VCFRAMEWORK11_0-10003624.SCA
VCFLEX11_0-10003616.SCA
The specific error is as follows:
<i>Error in compiling Flex application: Error: Failed to read stylesheet: /vc/skins/defaultSkins.css
(D:\usr\sap\PLD\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\TestModel_25034\FLEX_COMPILATION_FOLEDR\AAD15H.mxml:23)
Failed to compile AAD15H.mxml</i>
"TestModel" is the name of my model in this example. I would appreciate any assistance anyone can offer.
Regards,
Jim

Hi Jim,
I have never heard of similar errors. Have you had a look at the stylesheet that is referenced? Maybe the file is corrupt, permissions are wrong or the path has changed? Try to change the defaultSkins.css.
You can also have a look at the source code after compiling. Select .mxml of iView AAD15H and have a look at line 23. Maybe you find some clues.
Best Regards, Benni

PSE* onVista- after install clone stamp tool fails

A couple of uses after installing, the clone stamp tool bring up a message box COULD NOT USE THE CLONE STAMP TOOL BECAUSE OF A PROGRAM ERROR. Exactly the same error as occured with Version 6! I uninstalled V6, cleared directory entries etc and did fresh install, still the same problem. Now I go to use latest version in Version 8 and the same old. Any helpful suggestions? Thanks

Hi, Can you please tell which file and format you are working upon, Because as per my knowledge goes, this does not happen and it works very well for all my images.

When installing, get "Error! Can't initialize plug-ins directory"

Began having problems when opening Firefox and trying to make Firefox the default browser. Windows 7 updated, AVG up-to-date and virus scans clean, MalwareBytes up-to-date and scans clean. Troubleshooting finally caused me to uninstall and try for clean install ... normal Windows 7 uninstall process successful. Made sure Firefox folder in "Program Files" was deleted. Downloaded "DownloadApp_1_7_5_198_Setup" (29,442 KB) from Mozilla website and run ... get "Error! Can't initialize plug-ins directory. Please try again later."

Thank you guig2! Followed your bleepingcomputer.com link above and found the problem was my permissions on C:\Users\Bill\AppData\Local/Temp. It was not "Full Control" for my User or Administrator. Updated the two lines to permit full control for folder, subfolder and files. Ran perfect.

Itunes will not install getting error

I am using Windows 7 on a Sony Vaio F series laptop
Itunes refuses to install on my computer. I am getting error 0x8007054f. I have read around that this error is associated with my computer itself. I checked that I have a couple of windows updates that refuse to install but I am unsure about what to do about them. Here they are:
Security Update for .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 for x64-based Systems (KB2446709)
Security Update for .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 for x64-based Systems (KB2478661)
Security Update for Microsoft .NET Framework 3.5.1, Windows 7, and Windows Server 2008 R2 for x64-based Systems (KB2416471)
Security Update for Windows 7 for x64-based Systems (KB2556532)
Security Update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2538243)
Any suggestions?

i think im getting this problem! ive got loadz of windows updates that wont update and i seen somewhere that that has something to do with why itunes wont download properly:/

After deployment getting error as below.

MSS/ESS Deployment Exercise :
After building a project I successfully carried out several deployments after modifying the code within the project set.
On the fifth deployment we encountered the familiar error message 'did not accept login request as apiadmin on port 50018, Cannot login, already active sessions'.
After restarting the SDM server successfully deployed a project.
Also getting error that is "deployment exception:filetransfer failed:error received from the server:connection between the server & client was broken".
Please provide the solution on this asap.
Regards
Nilesh

Hi Nilesh,
If my understanding is correct,you have the problem like this:
After restarting the SDM you are able to deploy for 2-3 times. After that you are getting active sessions.
Before deploying your application, make sure that nobody is deploying at that time and all their previous deployments are finished. Even if somebody deployment is in progress you will get Active sessions error.
Are you trying to deploy the same application all the time? Looks like one of your application is taking more time to deploy / not deploying because of some problem. Try to find out that application and see the deployment log for that.
Regards,
Jaya.

Win 7 AVMS_APP_2.0.2.1 After Install getting Error Assertion Failed

Similar Messages

Maybe you are looking for