Win 7 does not associate swf with Shockwave Flash Captivate 7

I created a test file and when I went to publish it in Win 7, there was no application for the swf file.  I tried to find Shockwave Flash or Macromedia and I could not find anything to associate it with.  I looked on the Internet and someone suggested a stand alone Flash Player. I can associate the swf file with that but then it won't play through Captivate like it should.  I tested it on another Win 7 machine and it too could not find the application.  Captivate 5 with XP was so easy. It just found it and I had no problems.  What is this about?  Any help would be greatly appreciated.  Thanks

When you publish your project as a SWF, a HTML file is also published. You can open this HTML just like any other web page in IE, FireFox or Chrome, You don't need a standalone Flash Player for that.
"I can associate the swf file with that but then it won't play through Captivate like it should. " -- You can insert SWF files on a slide in Captivate. AFAIK, Captivate could never be used as a "player" for SWFs.
Sreekanth

Similar Messages

  • My windows 7 machine does not recognise .swf files. I have down loaded the flash player but I think.

    My windows 7 machine does not recognise .swf files. I have down loaded the flash player but I think but it is linked as a plug in with chrome and IE.  How can I get my windows to recognise the .swf files to play them.

    The downloaded file is the projector, not an installer; you need to make the file association manually:
    move the downloaded exe file to a location you can remember, e.g. C:\Windows\SysWOW64\Macromed\Flash
    right-click on a swf file and select Open with > Choose default program
    navigate to the folder you saved the player and select flashplayer_13_sa.exe

  • HT1849 when I download album works from itunes it does not associate with the correct artist

    when I download album works from itunes it does not associate with the correct artist

    Where are you looking to download them from ? You might be able to redownload them via the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage on your Mac's iTunes. If that album shows there but doesn't have the cloud symbol against it for redownloading then that implies that it's still in your iTunes library

  • AP does not associate with WLC

    the wlc send the log:
    Feb 11 10:31:48.263 spam_lrad.c:1048 LWAPP-3-DISC_INTF_ERR1: Ignoring discovery request received on non-management interface (2) in L3 LWAPP mode
    Any Idea? I review the network configuration and all is fine, I have 3 AP associate without problems but Im trying to add two more and send this log, from the same swithc.

    The AP 1242 in this port is working fine:
    interface FastEthernet3/7
    switchport access vlan 105
    switchport mode access
    spanning-tree portfast
    The AP 1242 in this port does not associate:
    interface FastEthernet3/8
    switchport access vlan 105
    switchport mode access
    spanning-tree portfast
    The APs are the same and the configuration is the same but one works fine and the other dont.
    any Idea?

  • Does the iPad2 come with a flash drive? I have the iPad first one and it won't let me play games on facebook, Does the iPad2 come with a flash drive? I have the iPad first one and it won't let me play games on facebook

    Does the ipad2 come with a flash drive? I have the first iPad and can't play games on facebook because apple doesn't support a flash drive

    You are talking about Flash Player, not Flash Drive.
    5 Flash Player Alternatives http://www.techshout.com/features/2011/01/flash-player-for-ipad-apps/
     Cheers, Tom

  • Wireless keyboard does not auto setup with a mac mini

    I have just bought a mac mini and am trying to set it up, the only keyboard I have is the apple wireless keyboard. I have switched the Mac on and it finds the "magictrack pad" but does not seem to find the key board. The keyboard light flashes for the the 3 minutes looking for something to pair with - I have managed to pair it with my iPad (and remove the pairing - afterwards) but it does not auto-pair with the "new" Mac. The problem is that I cannot go any further (to allow me to complete the full setup procedure) without filling in the information that is required and I cannot fill in the information required without a keyboard. I do not have a USB (or any other keyboard) so I seem to be a little stuck. - Any ideas would be gratefully received.
    Is there any way of connecting a PC laptop to the Mac Mini and use the keyboard on the PC?

    Not sure what your process was but try this.
    Make sure the Mini is off. Hold down the button
    on the keyboard to make sure it is off.   Next
    start the Mini and as soon as you hear the
    start up chime, press the power button on the
    keyboard.  Be sure not to press any other keys.
    For what ever reason, timing is critical with the
    keyboard pairing at boot time.  This is only an
    issue when doing things that require a keyboard
    at boot.  Once paired, it connects fine when normally
    booting.

  • The hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?

    the hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?

    it might be a malfunction in your device. you might ave to send it to repairation
    1.ave you try resetting it or restoring it?
    2. did your hold boutons whas working beffor?

  • Time Machine does not cope well with nearly-full disk

    Although Time Machine is supposed to delete old backups when the disk fills up, under some circumstances it does not cope well with a disk-full condition.
    Hardware: iMac (mid 2007)
    OS: Mac OS X version 10.6.8 (Snow Leopard)
    Processor: 2.8 GHz Intel Core 2 Duo
    Memory: 2 GB 667 MHz DDR2 SDRAM
    The other day I noticed that I had not had a successful Time Machine backup in over a day. Backups were taking a long time to run (4 hours or more), during which time the backup disk was chattering constantly and the disk showed "Estimating index time" in the Spotlight menu (even though I had excluded the disk from Spotlight indexing). When the disk finally stopped chattering, the backup finished with no visible errors but Time Machine continued to state that the last successful backup was yesterday. The backup disk was nearly full, but I had assumed that Time Machine was designed to cope with this situation by deleting old backups.
    A complete annotated log file of the incident and my observations can be found here: http://bentopress.com/backup.log.zip
    Here are some of the interesting entries from the system.log file:
    Sep  7 16:22:14 Bento-iMac com.apple.backupd[56515]: Starting standard backup
    Sep  7 16:22:14 Bento-iMac com.apple.backupd[56515]: Backing up to: /Volumes/My Backup Disk/Backups.backupdb
    Sep  7 16:23:07 Bento-iMac com.apple.backupd[56515]: No pre-backup thinning needed: 100.0 MB requested (including padding), 137.2 MB available
    Sep  7 16:25:49 Bento-iMac com.apple.backupd[56515]: Copied 32984 files (23.7 MB) from volume iMac HD.
    Sep  7 16:25:53 Bento-iMac com.apple.backupd[56515]: No pre-backup thinning needed: 100.0 MB requested (including padding), 108.4 MB available
    Sep  7 16:25:57 Bento-iMac KernelEventAgent[47]: tid 00000000 type 'hfs', mounted on '/Volumes/My Backup Disk', from '/dev/disk1s3', low disk, very low disk
    Sep  7 16:25:58 Bento-iMac mds[45]: (Normal) DiskStore: Rebuilding index for /Volumes/My Backup Disk/Backups.backupdb
    Sep  7 16:25:58 Bento-iMac KernelEventAgent[47]: tid 00000000 type 'hfs', mounted on '/Volumes/My Backup Disk', from '/dev/disk1s3', low disk
    Sep  7 16:25:59 Bento-iMac mds[45]: (Normal) DiskStore: Creating index for /Volumes/My Backup Disk/Backups.backupdb
    Sep  7 16:26:00 Bento-iMac KernelEventAgent[47]: tid 00000000 type 'hfs', mounted on '/Volumes/My Backup Disk', from '/dev/disk1s3', low disk, very low disk
    Sep  7 16:26:00 Bento-iMac mds[45]: (Warning) Volume: Indexing reset and suspended on backup volume "/Volumes/My Backup Disk" because it is low on disk space.
    Sep  7 16:26:02 Bento-iMac mds[45]: (Normal) DiskStore: Reindexing /Volumes/My Backup Disk/.Spotlight-V100/Store-V1/Stores/35367D91-8096-4D43-802B-A8658DBAB581 because no basetime was found.
    Sep  7 16:26:02 Bento-iMac mds[45]: (Normal) DiskStore: Rebuilding index for /Volumes/My Backup Disk/Backups.backupdb
    Sep  7 16:26:04 Bento-iMac mds[45]: (Normal) DiskStore: Creating index for /Volumes/My Backup Disk/Backups.backupdb
    Sep  7 16:26:14 Bento-iMac com.apple.backupd[56515]: Error: Flushing index to disk returned an error: 0
    Sep  7 16:26:14 Bento-iMac com.apple.backupd[56515]: Copied 776 files (17.3 MB) from volume iMac HD.
    Sep  7 16:26:15 Bento-iMac com.apple.backupd[56515]: Backup canceled.
    Note the "error: 0". Error code zero normally indicates success.
    There were also many, many, many copies of the following message, which occurred while Spotlight was trying to index the backup disk:
    Sep  7 17:28:40 Bento-iMac com.apple.backupd[58064]: Waiting for index to be ready (100)
    Here's what I think is happening: at the very end of the backup, after the files have been copied to the backup disk, mds resets indexing because the disk is now full. backupd's attempt to flush the index to disk then fails because indexing is suspended (error zero), so the backup is canceled. I suspect that this may occur when the new backup and the old one(s) being deleted are both small enough that the disk "packs" tightly, leaving no room for the index. If a large (>500MB) old backup had been deleted to make room for a small (<100MB) new one, the problem would not have occurred.
    I worked around the problem by switching Time Machine from the full disk to my Time Capsule. (I did not have this system backing up to the Time Capsule originally because I purchased the Time Capsule later for a different system.) The downside of this is that I lost access to older backups (though they are still accessible by right-clicking on Time Machine in the dock and selecting "Browse other Time Machine disks..."—however, I have not actually tried this). I'm also not completely happy having both my main systems backing up to the same hardware, but everything seems to be working well at this point and I do have a secondary backup system, using SuperDuper to clone the systems' disks to an external HD, which I do about once a month.
    Although I have worked around the problem, I am posting this in the hope that it will be useful to someone else, in the hope that someone at Apple will notice and perhaps improve the performance of Time Machine in this situation, and also in the hope that someone can suggest a solution that does not involve throwing a bigger disk at the problem. Is there any way to free up space on Time Machine's backup disk, for example by manually pruning older backups, either through Time Machine itself or via the Finder or command line?

    If you suspect that the disk being full is the problem, have you tried deleting some of the old backup data on the TM disk?
    When in TM, go back to the past a long way, right click on a file/directory and select "delete backup". Do this on some big files you have (so that you get more space per removal) that you change all the time (so you'll still have recent backups).

  • Does not start up with last viewed Tabs even though chosen in options?

    V 4.01 with Vista. Even after choosing the correct option in options>options>General FF does not start up with the last session of Tabs and Windows. It always opens with a single blank Tab. What am I doing wrong?

    Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History" if Firefox is closed because that prevails and prevents Firefox from opening tabs from the previous session.
    If you use CCleaner then make sure that Session is unchecked in the settings for the Firefox application.

  • Have tried to install icloud 4.0 for windows and again it does not allow syncing with outlook 2013 calendar and contact using windows 8.1 and IOS 8.02 (unexpected error)? I thought itunes 12.0 and icloud 4.0 would solve issue but still same result.

    I have tried to install icloud 4.0 for windows and again is does not allow syncing with outlook 2013 calendar and contact, using windows 8.1 and IOS 8.02 (get - unexpected error)?

    Having same issues. had been syncing every few days with outlook 2007 contacts and calendar but since updated to 4.0.2 and latest itunes I get an error that it is unable to sync. I can't seem to find any solution.

  • We love apple email, but it does not play wall with other venders when you want to use your own domain (lags, disconnections, etc.)?   What vendor should we use to make it push and work well?  We want to stay with Apple Mail.

    Help, our AppleMail does not play well with other Vendord to use our own domain.   iCloud mail works great, but so far others we have tried lag, disconnec, etc. not nearly as good as icloud mail.   Should we try exchange or office 365 plans with Apple Mail/  a lot more expensive?

    Microsoft Exchange is the best business solution, Office 365 will give a hosted version that works well, as you noted it is not the cheapest. You should also look at Zimbra, an excellent service.

  • Where can I get a browser that does not blind me with WHITE pages?

    Where can I get a browser that does not blind me with ghost WHITE pages? it's like being in a hospital -uggg!

    Hello,
    Your form author needs to read extend the form using Adobe Acrobat, then you should be able to fill and save the form in Reader. For more information, please see this http://www.adobepress.com/articles/article.asp?p=2158443&seqNum=3
    ~Deepak

  • Can I get an older release of Firefox? 36.0 does not play well with Windows 7.

    Firefox 36.0.4 does not play well with Windows 7. If it opens at all, it freezes within a minute so the screen goes pale and I get the classic spinning circle of death. Then the header says (not responding).
    Ideally I would like to drop back to version 32 or 33, but 34 and 35 had fewer problems.
    Can I find older versions anywhere?

    You can [[Install an older version of Firefox]] any time. But which will cause significant security risk. So If you can't use the latest version of Firefox, we recommend that you use the latest version of another browser.
    If the latest version of Firefox is causing problems for you or you just don't like something about it, please give us feedback about it here:
    [https://input.mozilla.org/en-US/feedback/ Submit your feedback and suggestions about Firefox]
    Anyway head for the ftp for older version but please be careful with these: ftp://ftp.eu.mozilla.org/pub/firefox/releases/

  • I have an ipad, when I watch a video the audio does not match up with the video, how can I fix this?

    I have an ipad and when I watch a video the audio does not match up with the video, how can I fix this?

    Hello there, graciecloyd.
    The following Knowledge Base article offers a few steps to try when an application is not functioning as expected:
    iOS: Understanding multitasking
    http://support.apple.com/kb/ht4211
    If an app doesn't respond to your input, or doesn't perform as expected, do the following, testing after each step:
    Check for app updates.
    Force the app to close.
    Restart your device.
    Update your iOS device.
    Learn more about troubleshooting apps.
    On Step 2, close all applicaitons that are open. On Step 3, if the restart doesn't help resolve the issue, you may also want to try the Reset step in that article as well.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Navigation Drop Down Menu Does Not Appear Correctly with Internet Explorer.

    Website was designed with Dreamweaver CS5 on a Mac. The navigation drop down menu does not appear correctly with Internet Explorer. When you mouse over a navigation option that has a drop-down menu, the drop-down portion appears on top of the first level. Hope someone can help me out.Thanks!
    http://www.catchaghosttoursofkansas.com

    Hi,
    and you should then iron out this minor inaccuracy, which I found in your source code, for example here:
    <div align="center"><a class="MenuBarItemSubmenu" href="hays.html">HAYS</a>
            <ul>
              <li><a href="hayswalkingtour.html">Walking Tour</a> </li>
              <li><a href="forthays.html">Fort Hays</a></li>
            </ul>
    All your "first" entries have to show a '#", like this:
          <div align="center"><a class="MenuBarItemSubmenu" href="#">HAYS</a>
            <ul>
              <li><a href="hayswalkingtour.html">Walking Tour</a> </li>
              <li><a href="forthays.html">Fort Hays</a></li>
            </ul>
          </div>
    after that you can link to the individual subgroups. See here e.g. (screenshots from my German DW):
    Hans-G.

Maybe you are looking for