Win 7 Home Premium Restore error 0xe0ef0003 - Boot Mgr Missing - on Pavilion s5257c desktop

Hi.  I have a Pavilion s5257c with Windows 7 (64bit) installed.  The computer had been going to blue screen and memory dump randomly for several months. 
I decided to do a system restore with previously created recovery disks.  Did not work and received the 0xe0ef0003 error.  Tried several times and always hung-up on the 3rd recovery disk.  Ordered HP recovery disks for desktop (5 disks).  Have tried recovery many times, using the HP Recovery Disks and still hangs on the 3rd disk with the same error.  Ran PC Doctor several times (provided with recover disk options), check HD OK, but has random memory fails (sometimes on high bit test, sometimes low bit test, sometimes checkered pattern, etc).  Tried formatting the HD with Kill Drive (free version) which does a simple 0 write in formatting.  Same error comes up with recovery disks after HD format (tried 2 times).  Tried a Win 7 Install ISO, downloaded from internet (several times).  Still cannot install Win 7 or restore PC.  Same error at same stage (3rd disk) of recovery.
Yesterday I found an ISO fix from the HP download center for the 0xe0ef0003 error, to fix some problems with certain PC video configurations during the system restore process.  From looks of my problem, seems I have the video config problem, but I do not know how to fix.  By the way, I can no longer boot from HD because system gives error (Boot Mgr Missing).
Any help will be GREATLY APPRECIATED!!  Thanks in advance!

HOW TO FIX!
I ordered 3 system restore cd from HP as the system restore was not working on the computer,
I installed the 3 dvd...I got the 0x03f0001 message on the black screen.... Upon bootup I got the boot mgr missing of course because the 3rd (official cd from Hp) could not fully install. I ran HP diagnostic and everything  passed. I removed the memory and installed new memory. After 4 failed installs and 2 calls to HP, I was told that the computer was defective and it needed to be sent back.
I installed a new hard-drive and ran the restore cd from HP and got the message above upon boot up after the 3rd cd installed and the system rebooted. Just a reminder only keyboard and mouse was installed and I disconnected the flash ports which were located on the front of the computer. I also change the cmos battery and reset the bios to factory defaults. Still could not get those bloody windows 7 restore (offical HP) 64 bit home to install.
So after much frustration, I installed an hp windows vista cd from hp from another hp that I own. GUESS WHAT MY NOW DEFECTIVE COMPUTER DIAGNOSED BY HP... AS DEFECTIVE AND WOULD NEED TO BE SENT BACK IS WORKING! WITHOUT PROBLEMS.
I DOWNLOADED AND INSTALLED OEM WINDOW 7 CD and UPDATED THE SYSTEM. (NO PROBLEMS)
So Its the cd's, and those that think its a cdrom drive issue, I also replaced the cd rom with an official hp cd rom drive and I still could not get those restore cd to work.
THANKS HP, I spent 6 hours to realize that the bloody cd's that I many others have are defective.....

Similar Messages

  • Unable to install windows 7 home premium updates error code 643 (KB 954430, KB973688 & KB2538243)

    Unable to install windows 7 home premium updates error code 643 (KB 954430, KB973688 & KB2538243) - Please help me!!
    I'm running Windows 7 Home Premium 64-bit on a Lenovo ThinkPad E530. This laptop is only brands new.
    KB954430, KB973688 & KB2538243 - These three updates keep giving me problems. In Windows Update, under "view update history" these keep showing up as failed. I also get the error, "Code 643".
    At the end of the installation it tells me three updates are failed to be installed and when I shut down to try to update, Windows always configures up to ~15%, then fails, and reverts changes, then prompts me to install updates the next time I turn my computer on. Each time, I have to re-install every update that I had installed prior to shutting down.
    I went through Trouble shooter - "Fix it" numerous times, Repaired Net framework profile and also followed few instructions I found from the net such as running "Reset Register Windows update Components" but nothing works so far.
    I even tried manually installing KB954430 but it told me "An error occurred during the installation of assembly component. 7B30B69B-OE6C-B7EO-A06B-D6B9ABF34537  HR RESULT: 0 x 80070BC9" and the installation bar seems to stop at "Publishing Product information", then rolls back the installation.
    If you need more details, please tell me & Thanks in advance

    Checkout this Microsoft article: http://support.microsoft.com/kb/976982 
    It has some resolution steps that may help.
    Thank you for being a part of the Lenovo Family,
    Catie
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Donate KUDOS and Click "Accepted Solution"

  • Boot Mgr missing

    System displays BOOT MGR missing press alt/con/del. Doing  built in system test HD test ok. Anyone hav an idea as to what is wrong. 
    I can't get on line to do anything. Hp down loads will not let me build a disk on another computer
    thanks
    Bob 

    Boot Manager missing has to do with the way Windows starts.  HERE is a Microsoft page that describes how to fix the problem.  However, I would assume none of those options are user friendly enough for the average consumer user.
    I would make sure there is nothing in the DVD/CD drive and no other USB devices connected, except for the keyboard and mouse, and then try to startup again.  It could be something connected caused the OS to check in the wrong device for startup files.
    Next, if things are no different, make a startup repair disk either on a working Windows 7 machine or get a retail install disk for Windows 7 or Vista.  Boot to that and then pick repair starup instead of install.
    {---------- Please click the "Thumbs Up" to say thanks for helping.
    Please click "Accept As Solution" if my help has solved your problem. ----------}
    This is a user supported forum. I am a volunteer and I do not work for HP.

  • Win 7 home premium restored to win 7 starter edition

    hello there, i purchased my hp pavillion laptop in australia sometime jan 27 2010 on a jb-hifi slectronics store.
    pavillion product name: pavillion dv6-1327tx
    operating system (when bought) : windows 7 home basic 32 bit
    two days ago i decided to restore from my image backup (from another partition of the same hard disk).
    along the way of restoration,
    - recovery reformats the system partiton
    - copies files for restoration and at the end of copy, it says next will be software installation, pls. do not interrupt
      by closing the lid or switching off the power, etc... with the continue button waiting to be press.
    - after pressing the continue button, recovery manager window displays "recovery restoration incomplete, recovery manager
      failed to restore the image" right away on the screen.
    - waited for 10 minutes but no sign of activity
    - decided to put off and on the power
    - after that software installation just got started till 85% and again the same "recovery restoration incomplete, recovery manager  failed to restore the image".
    - wait for another 10 minutes and no sign of activity, i press ctrl-alt-del, an option displays which i can run task manager .
    - from task manager i close the recovery manager window, and the installation continues again until it finished.
    - restarted automatically with messages configuring the system for the first time.
    - after all the rumble finished, i just got a windows 7 STARTER EDITION. what had just happened..??
    it surprised me that i backed up a windows 7 home premium 32 bit, but i got a windows 7 starter edition version after restore...?
    anybody who had same experience with their comments are really appreciated

    hello there, i purchased my hp pavillion laptop in australia sometime jan 27 2010 on a jb-hifi slectronics store.
    pavillion product name: pavillion dv6-1327tx
    operating system (when bought) : windows 7 home basic 32 bit
    two days ago i decided to restore from my image backup (from another partition of the same hard disk).
    along the way of restoration,
    - recovery reformats the system partiton
    - copies files for restoration and at the end of copy, it says next will be software installation, pls. do not interrupt
      by closing the lid or switching off the power, etc... with the continue button waiting to be press.
    - after pressing the continue button, recovery manager window displays "recovery restoration incomplete, recovery manager
      failed to restore the image" right away on the screen.
    - waited for 10 minutes but no sign of activity
    - decided to put off and on the power
    - after that software installation just got started till 85% and again the same "recovery restoration incomplete, recovery manager  failed to restore the image".
    - wait for another 10 minutes and no sign of activity, i press ctrl-alt-del, an option displays which i can run task manager .
    - from task manager i close the recovery manager window, and the installation continues again until it finished.
    - restarted automatically with messages configuring the system for the first time.
    - after all the rumble finished, i just got a windows 7 STARTER EDITION. what had just happened..??
    it surprised me that i backed up a windows 7 home premium 32 bit, but i got a windows 7 starter edition version after restore...?
    anybody who had same experience with their comments are really appreciated

  • Windows Vista Home Premium- Restoring Itunes Library- Not Eonugh Space on C

    I have 64 bit version of Vista Home Premium. Experiencing the following error when trying to restore music library. I have a 320 GB Hard Drive and a 250 GB external HD. After about 15 GB it states in the error-"Not enough space on C:/ library could not be saved. Anyone have any solutions?

    Hi, that's not a problem I've spotted before. From what I can find out it seems ubd.exe is part of Windows and responsible for handling .dll files in some fashion. You could try the Microsoft support page Use the System File Checker tool to repair missing or corrupted system files just to confirm that your system files are in order. More likely it is a problem with the Apple library being loaded. Unless you have thoroughly uninstalled all Apple components, deleted the recommended folders, then reinstalled it may be the case that you have an outdated file from the last build of iTunes that wasn't replaced, and that the error is generated by incompatible files trying to call each other.
    If you didn't do a full tear down already my advice for doing so is in Troubleshooting issues with iTunes for Windows updates
    tt2

  • Windows Vista Home Premium activation error (invalid key)

    Someone can help me about the error in subject? I put the key suplied in the notebook, and always I have a error to activate.
    Regards,
    renato.

    Hi,
    you did not mention if you recovered your machine with an original recovery media or just installed a original Windows, so I agree with snipe: a recovery does not need a key, because its already activated.
    Would appreciate some feedback from you.
    Cheers

  • Oracle 64bit for Windows 7 home premium 64 bit- ERROR in installtion

    Hi
    I have windows 7 home premium 64 bit on my laptop. I downloaded frm oracle site
    win64_11gR1_database_1013.zip for my windows.
    but as i start the setup..on prerequisite check..it found twio error:
    PRODUCT SPECIFIC PREREquisite checks-----
    Checking operating system requirements ...
    Expected result: One of 5.0,5.1,5.2,6.0
    Actual Result: 6.1
    Check complete. The overall result of this check is: Failed <<<<
    Problem: Oracle Database 11g is not certified on the current operating system.
    Recommendation: Make sure you are installing the software on the correct platform.
    ========================================================
    Checking service pack requirements ...
    Check complete. The overall result of this check is: Not executed <<<<
    OUI-18001: The operating system 'Windows Vista Version 6.1' is not supported.
    Recommendation: Install the recommended Service Pack.
    ========================================================
    First one is failed n another not executed...
    wht should i do???
    if i continue running setup will it make any problem..or suggest wht should i do....
    i need to install oracle onmy system any ways...
    Regards
    Gaurav

    First Thanks for reply..
    I got this OS Win& home premium 64bit with my laptop installed, i purchased it, it is not possible for me to purchase a new OS again.
    Is oracle dont have a solution for it...as i got the error.
    It was saying this Oracle version i downloaded work for version of Windows vista 5.0,5.1,5.2,6.0 and mine is 6.1.
    Can oracle provide something that will for my lappy's OS..
    I read many forums who upgrade from vista to windows 7 ,there oracle working fine on their laptops....
    i just need a solution with existing configuration of my laptop,rather than change my OS.
    Regards
    Gaurav

  • Two Days of Restore Error Code 6... HELP!!!

    I have an iPod Touch that's about two years old. I no longer have access to the laptop that it is normally synced to, so I downloaded iTunes on the family computer. After hours upon hours of problems (not syncing, or showing that it successfully synced but getting a "no content" error once it turned back on) I thought maybe it was my iPod that was messing up and not the computer. I reset my iPod through holding down the home button and the power button, and I'm now at the screen that shows the USB cord with an arrow pointing towards the iTunes symbol.
    I tried to restore on iTunes, and it will get all the way through until "verifing restore," and then I will get a pop up that says the process could not be completed because of an unknown error (error 6.)
    I uninstalled iTunes and installed an earlier version of iTunes, but then my computer wouldn't even recognize my iPod. I reinstalled the latest version of iTunes and Quicktime. Still getting the same error code.
    I am on an Administrator account, running Windows Vista 64 bit, and everything is up-to-date. All anti-virus and firewalls are turned off. I've followed all of the steps outlined on the Apple site, and I am down to paying $29 for a phone call to Apple. (Ha! Over my dead body!) I don't have another computer to try it on. I've used two different iPod cords (mine and the cord from another iPod), and have tried out all of the USB ports on the computer.
    I'm really hoping someone could help me with this before I lose my mind.
    I'm fairly computer literate, but I'm not a whiz. Please don't feel the need to break things completely down into laymans terms, but please don't use pure tech-speak(:
    Diagnostics:
    Microsoft Windows Vista x64 x64 Home Premium Edition
    Service Pack 2 (Build 6002)
    HP-Pavilion NC686AA-ABA a6700y
    iTunes 10.4.1.10
    QuickTime 7.7
    FairPlay 1.12.20
    Apple Application Support 2.0.1
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.4.1.2
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 3.0.0.2 (333.2)
    Gracenote SDK 1.9.1.485
    Gracenote MusicID 1.9.1.102
    Gracenote Submit 1.9.1.133
    Gracenote DSP 1.9.1.43
    iTunes Serial Number 00B3B0A00BAFB508
    Current user is not an administrator.
    The current local date and time is 2011-09-28 18:09:41.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information  NVIDIA, NVIDIA GeForce 6150SE nForce 430       
    **** External Plug-ins Information ****  No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:     {154BA537-EF26-4015-BE91-6ACFA30865E5}
    Description:     USB Wireless 802.11 b/g Adaptor
    IP Address:     0.0.0.0
    Subnet Mask:     0.0.0.0
    Default Gateway:     0.0.0.0
    DHCP Enabled:     Yes
    DHCP Server:
    Lease Obtained:     Wed Dec 31 17:00:00 1969
    Lease Expires:     Wed Dec 31 17:00:00 1969
    DNS Servers:
    Adapter Name:     {3BF6C369-3C76-4358-997A-8DE3B494BFE8}
    Description:     NVIDIA nForce 10/100 Mbps
    Ethernet  IP Address:     192.168.254.3
    Subnet Mask:     255.255.255.0
    Default Gateway:     192.168.254.254
    DHCP Enabled:     Yes
    DHCP Server:     192.168.254.254
    Lease Obtained:     Wed Sep 28 17:12:00 2011
    Lease Expires:     Wed Sep 28 17:11:59 2011
    DNS Servers:     192.168.254.254
    Active Connection:     LAN
    Connection Connected:     Yes
    Online:          Yes
    Using Modem:     No
    Using LAN:     Yes
    Using Proxy:     No
    SSL 3.0 Support:     Enabled
    TLS 1.0 Support:     Enabled
    Firewall Information
    Windows Firewall is off.
    ZoneAlarm Firewall is installed.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2011-09-28 17:14:05.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.0.1),   E: TSSTcorp CDDVDW TS-H653Z, Rev 4403 Drive is empty.
    **** Device Connectivity Tests ****  iPodService 10.4.1.10 (x64) is currently running. iTunesHelper 10.4.1.10 is currently running. Apple Mobile Device service 3.3.0.0 is currently running.  Universal Serial Bus Controllers:  Standard OpenHCD USB Host Controller.  Device is working properly. Standard Enhanced PCI to USB Host Controller.  Device is working properly.  FireWire (IEEE 1394) Host Controllers:  VIA OHCI Compliant IEEE 1394 Host Controller.  Device is working properly.  Most Recent Devices Not Currently Connected:  iPod touch (2nd generation) running firmware version 4.2.1 Serial Number:     8K9436WJ75J  **** Device Sync Tests ****  No iPod, iPhone, or iPad found.

    This Question can be best answered by someone who had the Same error pop up, but I'll try my best.  You have an iPod touch 2nd Generation and you don't have anymore warranty for it. I hope you didn't jailbrake it or did something illegal with it like putting a new software on it that should not be on there. Here we go:
    Go to your Friends house or anybody else you know that has iTunes on their Computer. Don't sync your iPod!
    Try to restore the iPod, or try to put it as new iPod so it'll delete everything but you'll have your iPod problem fixed

  • Windows 7 home premium 64 bit , no brightness control.

    My OS is Windows 7 home premium 64 bit. I have a brand new Lenovo "desktop" pc with AMD quad core processor with integrated ATI graphics, 6 gig of memory . I cannot find anyway to adjust the brightness via Windows . The monitor itself is all the way up and the pictures are still too dark specially on the tv tuner card. I did not have this issue with the monitor on my old IBM with Win ME in it . The display was plenty bright on that setup and did not have to have the brightness all the way up and the tv card in that looked great.
    The new setup has the latest drivers . I have looked under the power settings and there is no slider bar for brightness adjustment in there. Anyone got any ideas to try ?

    you can adjust the relative brightness using the integrated ATI graphics control panel setting.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Vista Home Premium 64-bit on a MacBook

    I've got the 2.4GHz MacBook (Aluminum Unibody one), and want to run Vista Home Premium 64-bit on boot camp. Can I do this? I know the install booklet says it's only on later MacBook Pros, but I was just checking.
    Thanks

    Hi,
    see this thread: http://discussions.apple.com/message.jspa?messageID=9274383#9274383
    Hope it helps
    Stefan

  • I get a message that says:boot manager missing..and it will not boot up..what can i do?

    When I turn it on ,a screen comes up that says Boot MGR missing..What can I do to fix it?

    Hi,
    Can you post back with the following.
    1.  The full Model No. and Product No. of the notebook ( from the service tag underneath your notebook ) - see Here for a further explanation.
    2.  The full version of the operating system you are using ( ie Windows 7 32bit ).
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Win 7 Home Premium 64 bit error 433

    Our ASA5505 works fine for a handful of VPN users, but ONE client won't work, which happens to be the only Home Premium unit.
    I'm sitting at my desk, and I have a W7 Pro x64 machine working right next to a W7 Home Premium x64 machine not working.  Both were installed from the same media, which includes the same pre-configured profile.  They are both running 5.0.07.0440.  I use the same username/password.  I tried another Home Premium x64 machine and it doesn't work either.  I've tried them wired and wireless.  
    The logs (at level=2) are similar except the failing machines record some "retransmissions".  Ignoring that, they are in lock step until they diverge as shown below.  Maybe the "retransmission" is the actual problem, but that doesn't tell me how to fix it.  We contracted to have our ASA5505 setup, and the vendor is no longer available, so there isn't a lot of expertise around (e.g. just me, an old hardware guy).  Any suggestions would be appreciated!
    GOOD LOG
    43     16:31:19.375  07/09/14  Sev=Info/4 IKE/0x63000056
    Received a key request from Driver: Local IP = 192.168.63.1, GW IP = 74.40.167.114, Remote IP = 0.0.0.0
    44     16:31:19.383  07/09/14  Sev=Info/4 IKE/0x63000013
    SENDING >>> ISAKMP OAK QM *(HASH, SA, NON, KE, ID, ID) to 74.40.167.114
     logs diverge here
    45     16:31:19.524  07/09/14  Sev=Info/4 IKE/0x63000014
    RECEIVING <<< ISAKMP OAK INFO *(HASH, NOTIFY:STATUS_RESP_LIFETIME) from 74.40.167.114
    46     16:31:19.524  07/09/14  Sev=Info/4 IKE/0x63000014
    RECEIVING <<< ISAKMP OAK QM *(HASH, SA, NON, KE, ID, ID, NOTIFY:STATUS_RESP_LIFETIME) from 74.40.167.114
    47     16:31:19.537  07/09/14  Sev=Info/4 IKE/0x63000013
    SENDING >>> ISAKMP OAK QM *(HASH) to 74.40.167.114
    48     16:31:22.920  07/09/14  Sev=Info/4 CM/0x63100034
    The Virtual Adapter was enabled: 
    IP=192.168.63.1/255.255.255.0
    DNS=192.168.123.2,0.0.0.0
    WINS=0.0.0.0,0.0.0.0
    Domain=clearcreek.domain
    Split DNS Names=
    BAD LOG
    34     16:39:27.685  07/09/14  Sev=Info/4 IKE/0x63000056
    Received a key request from Driver: Local IP = 192.168.63.2, GW IP = 74.40.167.114, Remote IP = 0.0.0.0
    35     16:39:27.685  07/09/14  Sev=Info/4 IKE/0x63000013
    SENDING >>> ISAKMP OAK QM *(HASH, SA, NON, KE, ID, ID) to 74.40.167.114
    logs diverge here
    36     16:39:27.685  07/09/14  Sev=Info/4 IKE/0x63000014
    RECEIVING <<< ISAKMP OAK TRANS *(Retransmission) from 74.40.167.114
    37     16:39:27.685  07/09/14  Sev=Info/4 IKE/0x63000014
    RECEIVING <<< ISAKMP OAK TRANS *(Retransmission) from 74.40.167.114
    38     16:39:27.685  07/09/14  Sev=Info/4 IKE/0x63000014
    RECEIVING <<< ISAKMP OAK TRANS *(Retransmission) from 74.40.167.114
    39     16:39:27.685  07/09/14  Sev=Info/4 IKE/0x63000014
    RECEIVING <<< ISAKMP OAK INFO *(HASH, DEL) from 74.40.167.114
    40     16:39:27.685  07/09/14  Sev=Info/4 IKE/0x63000013
    SENDING >>> ISAKMP OAK INFO *(HASH, DEL) to 74.40.167.114
    41     16:39:27.701  07/09/14  Sev=Info/4 IKE/0x63000049
    Discarding IPsec SA negotiation, MsgID=CCE47AE2
    42     16:39:27.701  07/09/14  Sev=Info/4 IKE/0x63000017
    Marking IKE SA for deletion  (I_Cookie=FC188982F322AEF2 R_Cookie=0171208F0B95DD70) reason = PEER_DELETE-IKE_DELETE_UNSPECIFIED
    43     16:39:27.701  07/09/14  Sev=Info/4 IPSEC/0x63700014
    Deleted all keys
    44     16:39:28.418  07/09/14  Sev=Info/4 IKE/0x6300004B
    Discarding IKE SA negotiation (I_Cookie=FC188982F322AEF2 R_Cookie=0171208F0B95DD70) reason = PEER_DELETE-IKE_DELETE_UNSPECIFIED
    45     16:39:28.418  07/09/14  Sev=Info/4 CM/0x63100012
    Phase 1 SA deleted before first Phase 2 SA is up cause by "PEER_DELETE-IKE_DELETE_UNSPECIFIED".  0 Crypto Active IKE SA, 0 User Authenticated IKE SA in the system
    46     16:39:28.543  07/09/14  Sev=Info/4 IKE/0x63000001
    IKE received signal to terminate VPN connection
    47     16:39:28.590  07/09/14  Sev=Info/4 IPSEC/0x63700014
    Deleted all keys
    48     16:39:28.590  07/09/14  Sev=Info/4 IPSEC/0x63700014
    Deleted all keys
    49     16:39:28.590  07/09/14  Sev=Info/4 IPSEC/0x63700014
    Deleted all keys
    50     16:39:28.590  07/09/14  Sev=Info/4 IPSEC/0x6370000A
    IPSec driver successfully stopped

    Hi Jim,
    At this moment, it seems like the non working system shows the delete event recieved from the headend (39     16:39:27.685  07/09/14  Sev=Info/4 IKE/0x63000014 ,RECEIVING <<< ISAKMP OAK INFO *(HASH, DEL) from 74.40.167.114).
    Please start by deleting the .pcf file on this system or trying to configure the connection-profile again on the client.
    If this does not help,try to test with local authentication for testing if possible.
    Run "debug crypto condition peer <public_ip_of_VPN_client>"  and then "debug crypto isakmp 200" and "debug crypto ips 200" for working and non working device and post the results.
    For your further knowledge , the error that you are getting , it has been discussed here as follows:-
    Verify Idle/Session Timeout
    If the idle timeout is set to 30 minutes (default), it means that it drops the tunnel after 30 minutes of no traffic passes through it. The VPN client gets disconnected after 30 minutes regardless of the setting of idle timeout and encounters the PEER_DELETE-IKE_DELETE_UNSPECIFIED error.
    Configure idle timeout and session timeout as none in order to make the tunnel always up, and so that the tunnel is never dropped even when using third party devices.
    Here is the link for your reference:-
    http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/81824-common-ipsec-trouble.html#solution13
    Regards,
    Dinesh Moudgil
    P.S. Please rate helpful posts.

  • Ihave ipod 4g and my ios is 4.3.3 and i want to update or restore it to ios 5 or 6 and my itunes version is 10.6 and i am using window 7 home premium. while restoring i am getting error 3194,1600,1601,1602,1603,1604. How to fix these error.....

    ihave ipod 4g and my ios is 4.3.3 and i want to update or restore it to ios 5 or 6 and my itunes version is 10.6 and i am using window 7 home premium. while restoring i am getting error 3194,1600,1601,1602,1603,1604. How to fix these error..... can you please help me

    See the actions for those errors located here:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting

  • Error 1720 when installing CS3 on Win 7 64-bit home premium

    I've been directed to the Forum for help as the Support Tech said she could not help me as they only help with CS5.  She said that CS3 WON"T WORK on a Windows 7 machine and yet I have googled and found people who have had it work.  She then told me that they will probably experience lag and other errors once they start using it more fully.  I smelt BS right about then in that conversation.  She couldn't confirm that if I purchased CS5 upgrade that my CS3 upgrade would qualify as upgrade.  Yeah, I'm really going to spend $800 to find out (not).
    Basically it ended where I either buy CS5 or go the Adobe Forums for help.
    So okay here I am.  Long post (sorry) but want to get all the fact out there.
    I purchased CS3 back in 2008 and installed on my XP machine.
    Just purchased a new laptop with Windows 7 64-bit home premium.
    Tried to install CS3 and as soon as it tries to install I get this message:
    Setup has encountered an error and cannot continue.  Contact Adobe Customer Support for assistance.
    Error 1720.  There is a problem with this Windows Installer package.  A script required for this install to complete could not be run.  Contact your support personnel or package vendor.
    I have tried the following solutions (found on Google), none of them work:
    1) installing in safe mode (with just Windows features in the start up)
    2) redownloading the files to ensure I didn't have a corrupted version
    3) installing as Administrator
    4) deregister/register Windows Installer
    5) looked for update to Windows Installer but mine is up to date
    6) checked that Windows Installer had "started" on my laptop (yes)
    7) used Adobe cleanup utility
    8) used Adobe licence recovery (Acrobat Pro (CS3) wouldn't get past the licence stage although it did install)
    Support Tech lady said that no old CS software would work on Windows 7 BUT last night I installed Photoshop CS Version 8 and it installed perfectly.  What I noticed different is that PS CS V8 used Installshield whereas CS3 I am told didn't use Installshield.
    So I am left with my new laptop using PS CS V8 with Dreamweaver MX.
    BTW Dreamweaver MX installed okay and it used Installshield too - so is that the reason CS3 won't install - it not using Installshield?
    Does anyone have any solutions not tried above?
    Am I just going to have to use old software on my Win7 machine?
    Thanks in advance.
    Sarah

    Hi Bob,
    Thank you for your reply.
    Yes I have tried the CS5 Cleanup Tool - multiple times.  Doesn't help.
    I am surprised to hear that you installed with no problems in light of Tech Support being adament that it won't work on Windows 7 and is not supported.
    I told Tech that I didn't accept that as there are probably hundreds of thousands of users with CS3 who have installed or tried to install on a Win7 machine and not everyone has hundreds of dollars spare to upgrade.
    I only really use DW, PS and Acrobat in the Suite so I'm going to have to save to buy those products but it won't be anytime soon.
    Thanks.
    Sarah

  • The User Profile Service service failed to Login user Profile error in Windows 7 Home Premium

    Hi,
    I recently purchased a new Dell Inspirion 1564 Laptop which had Microsoft Windows 7 Home Premium 64-bit installed.
    The hardware configuration is i5 core Processor, 4GB Ram , 320GB HDD and 512MB Graphics card.
    Today morning, I couldn't login as the system returned the following error after I entered the password.
    "The User Profile Service service failed to login.
    User Profile cannot be loaded"
    I couldn't login at all as i had not created any other user account, even the face recognition didn't work.
    I had to restore my pc to the previous state. I believe this happened after the installation of Windows Malicious Software Removal Tool x64 - March 2010 (KB890830) update, not immeditately though as i used the system few times after the installation of this update.
    Is this a bug? I cant imagine if this happens if I am about to give a presentation, its going to be disastrous!
    Any help is appreciated
    Avinash

    I'm getting the same issue - I'm the IT Manager at a school where every student has a laptop (fujitsu tablet T4410). This occurs to at least one new student every day. I have been unable to re-create the issue on demand, although I suspect it occurs when a temporary user profile gets created after the logon process takes too long (due to some disk activity, possibly related to windows updates or some thing). When we were creating student accounts on the machines, this would occur if we attempted to log in the newly created account before the computer had 'settled down' - it seems that there is a logon timeout, after which something stops working. If the new user's first logon happened too soon after booting, the profile would be corrupted. But this doesn't quite explain why it occurs seemingly randomly now.
    My current solution is to boot into safe mode, back up the user's files, delete the account, create it again (the other suggested solutions on the internet did not work)
    If you're desperate, you can log in while in safe mode, and use that to create a new account.
    In any case, this is proving a very bad experience of Windows 7 for my students, and I hope to see a more useful fix for this soon.

Maybe you are looking for

  • How do i download acrobat x1 trial on windows 7 64 bit

    Download of acrobat xi trial on windows 7 64 bit appears to work then pops up with a message saying computer incompatibale with this version of the software - help!

  • CS3 Lifecycle PDF form issues opening and blank pages

    I downloaded a PDF form and added text fields, numeric and calculated fields (FormCalc) using Lifecylce in CS3.  I now have CS5 and Lifecycle ES  When I use the original form and input data it calculates and looks fine.  I can open it no issues.  I e

  • Why are tools in PS cc dysfunctioning following an update?

    Hello, Just a few hours ago, I received a request to update Photoshop cc and now I have not been able to use many tools.  While attempting selections, eraser, brush tools and others I get blocks of transparency, spots, different colors (black) and ot

  • Comparing iPhoto 09 and Aperture 2

    I am giving a presentation on iPhoto and Aperture. Is anyone aware of a comparison table showing the significant differences? It does not need to be too sophisticated, just the basic differences. I stopped using a iPhoto a few years ago when I moved

  • Extending Dos facility to Remote System

    Requirement The Requirement is that The solution should able to execute interactive DOS commands on remote system(windows system) from current system(windows system). Constraints : �Operating system authentication is not allowed �Port opening is disa