Win 7 installation probs

Info, first.
Toshiba Satellite L775-S7114 (big box v. of L775-S7111).  Win 7 installed.
Now, onto the history (condensed version):
Had HDD probs (laptop kept shutting down out of the blue).  Tried to restore HDD to factory defaults (on board recovery).  During recovery laptop shut down.  Started getting "bootmgr.exe missing. Press Ctrl+Alt+Del to restart."   Would restart in HDD recovery mode and continued getting same message.
Ordered the recovery media from Toshiba.  Didn't work until I installed Win 8 (free OS only version from MS with purchase of this laptop), then used recovery media to factory default back to Win 7.  But found out prob was a bad fan.  Fan replaced.  Found out, then, bad sector on HDD.  Bought new HDD from Toshiba (correct P/N for this model).  Installed....
Now the bigger picture/problem:
New HDD will not install either OS.  Win 7 (recovery media) or Win 8 (OS only).  Been trying for months now....  all kinds of workarounds and tricks I can find/think of to get it to install.  Been on the phone with Toshiba support toooooo many times with ZERO help or satisfaction.  Sooooooo....
Got a wild idea and curious if someone can help me figure out how to do it.  Was thinking that if I can connect the new HDD externally to the laptop, that I can somehow manage to install Win 7 (recovery media) to it.  Hell, I'll even accept Win 8 (OS only) installation, because I can then install Win 7 in it's place.
I may not be relating this thought in a clear way to the forum, so I'll explain further.  Currently the bad HDD is working on this laptop, albeit in a very limited fashion.  Every so often it dies, and I have to use the onboard HDD recovery to get it back to running.  I would like to externally connect the new HDD (correct one for this laptop model) to this laptop, use the CD-ROM drive to transfer the Win 7 (recovery media), or the Win 8 (OS only) to the new HDD "THROUGH" this laptops CD-ROM drive.
Can this be done?  Or would I have to transfer all the data from the Win 7 recovery media disks -or- the Win 8 OS only disc to a USB to transfer it?  I'm really not sure how to accomplish this task.  But, I am at wits end, as I have sunk a TON of money into trying to repair/rework this laptop (I really like it) to no avail.  I can't find a new laptop with the features this one has for anywhere near a reasonable price. 
Any help will be greatly appreciated.
All my best to the forum, and thanx in advance.
Nawlins Jeaux

After holding down the option key after starting up, I tried EFI Boot, and the machine just booted into Mac OS X. I restarted again, and I selected Windows from the Win 7 DVD. After whirring a bit, a black screen said the following:
1.
2.
Select CD-ROM boot type.
Please help! Peace.

Similar Messages

  • Win Installer

    I am getting Win Installer error: "This installation package is not supported by this processor type". Contact Your Vendor - I am running a Pentium Duel-Core Processor E5700 @ 300 GHZ and 2 GB of ram.  Vista 32 bit Win O/S.  I tried installing twice and received this message both times.
    Is there a work around for this?  Otherwise I have a software that is of no use to me...
    Thank you,
    m_cain

    OK - I figured it out...  "This installation package is not supported by this processor type" The "Processor" should have been the clue (32 or 64 bit) - I am running 32 and the download folder has two executable's - one being 32 and the other 64  - the associated documentation did not explain why there were two different executable's - problem solved took a leap of faith and tried the other executable and it loaded fine.

  • Oracle 8i Post Installation Prob..

    Respected members
    I succesfully installed Oracle8i on linux
    (redhat linux 6.1) . Everything is ok and got a succesfull installation message.
    After it i set Path and everything but
    but getting listner not available or sometime oracle not available message message
    i try to solve prob but still not responding
    any one suggest me some idea . i use tcp/ip
    protocol and i have enough hardware resource required for oracle 8i installation
    Thanking you
    Piyush Patel
    null

    I am having the same problem with my resources.ora as empty.
    PLEASE SEND me the content that should go into this file. I need
    it to start my OMS service.
    my email id is [email protected]

  • Adobe InDesign CS4 Debug WIN Installation

    I need to port an InDesign CS3 plugin to InDesign CS4. In order to do that I've installed the Adobe InDesign CS4 Debug WIN but when I'm trying to start the application I receive the following error message in German: "Diese Anwendung konnte nicht gestartet werden, weil die Anwendungskonfiguration nicht korrekt ist. Zur Problembehebung sollten Sie die Anwendung neu installieren.". In english this should mean something like "This application has failed to start because the application configuration is incorrect. Try to reinstall the application.".
    The box I've tried installing on has visual studio C++ 2005 SP1 and InDesign CS3 Debug already installed (which works fine). I've looked through the requirements in the "InDesign® CS4 Read Me" and couldn't find anything that I'm missing.
    Any ideas?
    Thanks in advance.

    Hi Folks,
    ID CS4 Debug and ID CS3 Debug can be installed on the same system. The likely reason that the CS4 version is giving that error is because the CS4 version needs some Visual Studio 2005 SP1 DLLs that aren't installed on the computer.
    I believe that there are a couple of ways to fix this. One is to install Visual Studio 2005 SP1 (the recommended setup for CS4 plug-in development). When you install SP1 the DLLs needed by ID CS4 Debug will be installed. The other way, I think, is to not SP1, but install the release version of ID CS4 on your system. I understand that the ID CS4 Release version installer will install the DLLs needed by the debug version.
    However, if you use VS2005 (no SP1 installed) for CS4 plug-in development you will not be using the recommended development environment for CS4. But if you install SP1, and you want to develop plug-ins for CS3, you will not be using the recommended development environment for CS3 plug-in development. Go figure.
    Please note that once you install VS2005 SP1, any plug-ins that you compile will be looking for the SP1 version of the C/C++ Runtime DLLs when the plug-in is launched. The needed DLLs will be on your development system, so everything will seem fine when you test your CS3 plug-ins on your development computer. But when the plug-in is launched on a machine without the SP1 DLLs installed, the plug-in will not run.
    I'm not sure of the best way to deal with this (I'm mainly a Mac guy), but there was a thread here entitled
    Visual Studio 2005 SP1 about this issue a while back. This thread was partially deleted due to a forum software problem, and one of the ideas that was mentioned was lost from the message thread. Below are the useful (IMHO) missing messages (sent to me by Dirk Becker), who follows the forum using email.
    [Ugh! I told Dirk I would write up a Wiki entry for this, but work happened and I haven't gotten to this yet. :-( ]
    =========
    MISSING MESSAGES FROM THE THREAD: "[IDCS3 WIN] Visual Studio 2005 SP1"
    =========
    FROM: Eugenio Andres
    Hi Jim,
    From your original error message, the problem is most likely with the installation of the C/C++ SP1 runtime DLL on the machine that does not have the compiler. It's not so simple nowadays as copying over the DLLs, because Microsoft invented the side-by-side system, that allows having several versions of the same file on one machine.
    Your options are installing the runtime on each machine (a package for that is available from Microsoft Download) or changing your project to the static runtime ("Multithreaded" instead of "Multithreaded DLL"). I always use static linking in plugins with no problems, although Adobe specifies dynamic in their instructions, but you avoid these "DLL hell" problems.
    Regards,
    Eugenio Andres - www.ExpertosInformaticos.com
    =====
    =====
    FROM: Jim Birkenseer
    Hi Eugenio,
    Thanks for the information.
    So, are you saying that I simply have to go into my Plug-In's property page in VS2005 SP1 and change the C/C++ Code Generation from Multi-threaded DLL (/MD) to Multi-threaded (/MT) and rebuild the project? What are the downsides of doing this--or are there any?
    <...SNIP...>
    -- Jim
    =========
    =========
    FROM: Eugenio Andres
    Hi Jim,
    You're welcome.
    Yes, that project change should do it. The difference is that with the "DLL" version, your plugin loads the C/C++ runtime shared library (DLL) at runtime and calls it for any needed functions (like strcpy, malloc, etc.). Without the "DLL", the linker puts the C/C++ runtime code directly into your plugin and you don't need the C/C++ runtime SP1 DLL (the error you're getting is because your plugin required the DLL and it's not found on that machine).
    The C++ SP1 runtime shared library is different from the C++ non-SP1 library InDesign uses. In this new Windows "side-by-side" scheme, both can live together.
    If you use the exact same C/C++ runtime that Adobe uses, then that library is physically shared and it allows to do some "risky" things as e.g. allocating memory in one module (e.g. InDesign) and freeing it in another (e.g. your plugin). But this is usually not recommended and I don't think Adobe is doing it (but then it's only my impression from the code structure).
    Anyhow, from the moment you use the SP1 compiler, you're not sharing the runtime any more with InDesign, so it doesn't matter if you compile "MultiThreaded" instead of "MultiThreaded DLL". The difference between these is the size of the plugin and the easyness of distribution, and without DLL you miss possible "automatic" updates of the C++ runtime DLL (because the C/C++ runtime code is embedded in your plugin), but lately new versions of the C/C++ runtime become "different" DLLs, as you can see, so that's not so relevant any more - or if it's critical, you can always recompile your plugin and redistribute if needed.
    You can find a brief description of SP1 in
    http://msdn2.microsoft.com/en-us/vstudio/aa718695.aspx
    It looks like minor non-breaking changes to me, but one never knows...
    Cheers,
    Eugenio Andres - www.ExpertosInformaticos.com

  • T61P - Won't Power Down - Win Installer Seems Broken Too

    Not sure which patch mucked up T61 but Vista Business SP2  will no longer shut down. When pressing power button or using   Win shutdown command, system hangs and eventually produces BSOD (BCCode 9f). Can't make much sense of mindump. Event viewer shows 2 critical errors related to Kernel-Power without additional comment; I believe this was an 'issue' before. 2308 errors in 7 days, 7639 warnings, most prominent event id  4676 Servicing Hotfix patches.
    sfc checked. no malware trace, hardware fine. Disabled nonessential start-ups but same result.
    Strangest thing; programs no longer install. Getting progress bar to 99% before installer hangs. No logs as far as I can tell. Baffled how this is all related..
    No restore points.
    Suggestions are most welcome.
    TIA
    Frank
    Message Edited by trackfan on 08-02-2009 01:14 PM

    Have you tried uninstalling SP2?
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Oracle 8i on windows terminal server(installation probs.)

    -->>oracle 8i installation in terminal server.
    i have termianal server client window.
    and i am doing remote installation of oracle 8i from client window.
    the installation completes copying all files but
    when comes for net8configuration and database assistant..
    screen gets hang..i mean that service become hang..
    like in database creation assistant ..it is not going above 0%.
    what to do?
    using any other remote viewer will solve this probs?
    regards

    If you got answer please let me know. I got stock in same place for my Production installation.
    [email protected]

  • Coldfusion installation probs.

    I am trying to install coldfusion-70-win on my laptop with windows 7. I had it on a previous computer, but cannot access that computer now. I have a back up CD which my Web developer put all the necessary installation components to manage my website, which is where I am trying to complete installation from. The problem is everytime I get to 99%, the Install anywhere keeps asking me to select another location to install it in. Doesn't matter which location I choose, it will not finish installing. I am not very knoweldgeable with this stuff, so any help would be much appreciated.

    Thanks for that. I just phoned the Australian Support no and the guy there told me that he can't help me unless I purchase the newer version of coldfusion which will cost me over $2000 AuD, as the older version 7 is no longer available. That's not an option for me, and I know that on my old computer I could still run this software, quite frustrating. AS I no longer have access to the old computer. Would you have any other suggestions, or am I stuck here? Appreciate your feedback.

  • Installation prob Essbase Administration Services 9.3.1 on HP-UX 11.11

    Hello,
    I'm having problems while installing the Essbase Administration Console 9.3.1 on HP-UX 11.11.
    At the last step, I have the following messages in the Unix console:
    ...........May 29, 2008 12:29:37 PM com.hyperion.cis.ExpandArchives execute
    SEVERE: An exception while extracting the archives.
    The message is: java.util.zip.ZipException: error in opening zip file
    May 29, 2008 12:29:37 PM com.hyperion.cis.ExpandArchives execute
    SEVERE: An exception while extracting the archives.
    The message is: java.util.zip.ZipException: error in opening zip file
    May 29, 2008 12:29:37 PM com.hyperion.cis.ExpandArchives execute
    SEVERE: An exception while extracting the archives.
    The message is: java.util.zip.ZipException: error in opening zip file
    May 29, 2008 12:29:37 PM com.hyperion.cis.ExpandArchives execute
    SEVERE: An exception while extracting the archives.
    The message is: java.util.zip.ZipException: error in opening zip file
    May 29, 2008 12:29:37 PM com.hyperion.cis.ExpandArchives execute
    WARNING: The work folder exists. Make sure that it is empty.
    May 29, 2008 12:29:37 PM com.hyperion.cis.ExpandArchives execute
    SEVERE: An exception while extracting the archives.
    The message is: java.util.zip.ZipException: error in opening zip file
    EAS-INSTALL.LOG
    ==============
    (May 29, 2008 4:56:50 PM), eASSuiteContext, com.installshield.product.actions.Files, err, ProductException: (error code = 601; message="Error 0")
    STACK_TRACE: 12
    ProductException: (error code = 601; message="Error 0")
         at com.installshield.product.actions.Files.install(Files.java:477)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(PureJavaProductServiceImpl.java:1916)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(PureJavaProductServiceImpl.java:5195)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(InstallableObjectVisitor.java:369)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(InstallableObjectVisitor.java:333)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(InstallableObjectVisitor.java:133)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(PureJavaProductServiceImpl.java:4563)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(PureJavaProductServiceImpl.java:3758)
         at com.installshield.wizard.service.AsynchronousOperation.run(AsynchronousOperation.java:41)
         at java.lang.Thread.run(Thread.java:595)
    Thanks for your help.
    Regards,
    Andy

    Hi all! I faced into similar problem in March. (installing hyperion EAS "MakeEDSLinkEssdlls: not found"
    I have also faced to zip error messages as well. I have started communicate with support, and finally I should have installed each product in separate HYPERION HOME, then I have moved them into one. It isn't easy, but can be done. It is a bithunter method:
    First install Shared Service, then Essbase Client and Server. It should be ok.
    Configure them with configtool HH/common/...
    Then install EAS in different HH. You will have another .hyperion.<hostname> file, so save the 'original'. You will find also a HH/common/.. configtool.
    Copy the common dir of that HH to the "original" one and other parts in a separate directory under HH original. Then you have to edit product.xml (HH/common/config/product/...) to point product to their new location (in the "original" HH) and copy to the "original". Then run configtool, and you shall see eas unconfigured in productlist as well. Have attention to have the right .<hostname> hyperion files, when starting configtool. Then you can config eas as well. Good luck! *****It is not a supported method, so do it your own risk! Make copy of your existing phases !!!!! ******
    Lacko

  • Itunes and windows installation prob...

    I had an older version of itunes and tried to upgrade to 7.1. Everytime I try to download it, I click on the 'itunes setup' icon on my desktop and a 'windows installer' window pops up with a bunch of info that I don't understand. I uninstalled the old itunes and quicktime...any other suggestions?
      Windows XP  

    http://img148.imageshack.us/img148/8793/itunesvs7.png
    with that one, let's try the following procedure.
    first, head into your Add/Remove programs and uninstall your QuickTime. if it goes, good. if it doesn't, we'll just attend to it when we attend to itunes.
    next, download and install the Windows Installer CleanUp utility. use it to clear any existing itunes and/or QuickTime installation configuration information from the PC.
    Description of the Windows Installer CleanUp Utility
    next, use the the following document as a guide for manual removal of leftover itunes and quicktime program files:
    Removing iTunes and QuickTime for Windows
    now try another itunes install. does it go through properly this time?

  • Creative Sound Blaster Audigy ZS And Vista Driver installation prob

    HI!
    I encounter Installation problems with that file:
    Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077
    I Use Vista 64Bit Ultimate and when I try to install this package I have an error message after my language selection. Is there a known issue for this
    Thanks!
    Julien

    estebandit wrote:
    Is there a known issue for this
    Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
    SBAX_PCDRV_LB_2_8_000.exe
    Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
    Requirements:
    Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
    Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
    whereas the correct driver shows the following,
    This download supports the following audio devices only:
    Creative Sound Blaster Audigy including Platinum and Platinum eX series
    Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
    Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
    Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
    Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

  • AIR desktop app installation prob

    Gidday
    I'm having trouble getting my AIR desktop app (AIR2.5 with a self-signed certificate) to do auto updates.  I've had it updating fine in the past, but now get the following message:
    "This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance."
    Here's my method when I test the installation:
    - publish a new AIR file using the SAME version number as the currently released app eg 1.017
    - install it on my local machine
    - publish a new AIR file with an incremented version number, in this case 1.018
    - set my text file that the app checks online for updates to contain 1.018
    - upload 1.018 AIR file to my site
    - run the desktop app (version 1.017).  It successfully detects there's a new version, and downloads it.
    - it starts to install, and then I get the error
    I've researched this all afternoon, and have found articles mainly talking about expired certificates.  So I created a new certificate, and the problem still occurs.
    Also, I've tried uninstalling my app from my local machine, but I still get the installation error.
    Any ideas how to rectify this, so that I can continue using auto updating rather than force people to uninstall and download the new version for installation?
    Thanks for your help.

    Nevermind - the txt file that contains the version number and the url for the updater has the url for my live site, not my test one, so I changed it , and it installed fine.

  • MAC OS 10.5.8 Combo update installation probs

    Hi!!
    I'm trying to update my mac with the new software update, but unfortunately, it can't seem to finish installing. im stuck in the "configuring installation" part. i left the computer for two hours hoping that it would continue with the installation, but it didn't.
    what seemed to be problem? do i have to redownload the update?

    There are no guarantees, but following this procedure when installing updates and upgrades on your Mac, or even re-installing them, will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
    It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
    So before you do anything else:
    If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
    Turn off sleep mode for both screen and hard disk.
    Disconnect all peripherals except your keyboard and mouse.
    1. Repair Permissions (in Disk Utility)
    2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
    At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
    3. Download the correct version of the COMBO update from the Apple download site.
    The Combo updater of Leopard 10.5.8 can be found here:
    http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
    If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
    More information on using Software Updater here:
    http://support.apple.com/kb/TA24901?viewlocale=en_US
    Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
    Now proceed as follows:
    4. Close all applications.
    5. Unplug all peripherals except your keyboard and mouse.
    6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
    7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
    8. Once your Mac is awake, repair permissions again, and you should be good to go!
    If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
    9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
    N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
    Lastly, Apple's own article on the subject of Software Update may also be useful reading:
    http://docs.info.apple.com/article.html?artnum=106695
    If you are updating Safari (or just have):
    Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
    Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
    Additional tips on software installation here:
    http://docs.info.apple.com/article.html?artnum=106692
    To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
    Again, the advice is to remove all Input Managers from the following directories:
    • /Library/InputManagers
    • ~/Library/InputManagers
    especially prior to system updates (they can always be added back one-by-one later).

  • Addon Installer Prob

    Hi,
    I am using Simple Installer for installing the Addons in sapb1.
    What is the use of the Professional Installer? 
    how to install multiple addons in Sapb1? which is easy way.
    plz help me asap
    Regards

    Hi,
       Professional Installer is generate standard windows installer that we build using .NET. You can use Merge Module and other standard features that you will get in .NET installer.
    One main disadvantage is, it fails in WTS and Citrix.
       Where as the Simple installer is really very simple installer as it named. If you can able to pack your add-on using this simple installer, you can go with this since it light weight and works in WTS and Citrix.
        When you want to install more Add-on, install one by one. I dont thinks there as any short cut exist.
    HTH
    B Ravi Shankar

  • Zen Micro Installation Prob

    I just bought my green micro today and I tried to install it, but it didn't work. Everything went well until the actual installation part where I got numerous popups saying that _____ could not be registered. The only option I had was to press okay. After I just kept pressing okay (there were tons of these pops), the installation reached 00%. When I connected my micro, my computer did not recognize it and I could not open any of the programs installed. Please help! I have all the system requirements but it still doesn't work.
    Thanks for your time!Message Edited by maddmagg on 0-22-2005 0:43 PM

    Any help would be appreciated

  • Solaris 10 installation probs, stops wen installing SUNWsolnm

    Hi,
    Am facing probs installing solaris 10 b72, x86 on Proliant systems - DL380G3 and ML580G2, with boot as Smart Array 5i,
    The installtion just stops showing installing SUNWsolnm,
    system has 2GB ram and 18GB U-3 Disks,
    Can anyone help on this,
    Thanks and Regards,

    -> http://forum.sun.com/thread.jspa?threadID=22200&tstart=0

Maybe you are looking for