Win 7, itunes 11 just installed - I cannot see the text since text is black and so is the background. Help.
Win 7, itunes 11 just installed - I cannot see the text since text is black and so is the background. Help.
Bump
Similar Messages
-
I downloaded the new software (ios 6) for the iphone 4s and my screen went black. I cannot use my phone at all. my phone rings, but I cannot answer it either. what should I do?
If anyone is curious I couldn't wait I had to bring my phone in its the LED screen I had it replaced 80 bucks . Im glad thats all it was and didn't loose anything on my phone.
-
how do i get itunes to recognize the phone so I can restore it to original settings?
Put it in Recovery Mode. See http://support.apple.com/kb/HT1808
-
I have formatted my computer and re installed itunes. However, I cannot see my purchased musics/movies/books on my library anymore. I can see my purchased registration on my account, but I don't know how I can do to download it back to my pc. Any ideas?
Thanks a lotGo to the iTunes Store and select "Purchased" from the Quick Links side bar on the right. Go through all the tabs to download again for free
-
I moved folder Itunes folder to the desktop.if I open Itnues now, I cannot see my library.how can I put it back in the folder "music" in Finder?
done through Hard Disk at top right of the screen...itnues folder is there already because of my dragging into folder/music..but Itunes does not ope the whole library.
whn I opened it, itwas like it had never been on the mac and it downloaded my last purchasesdone with the iphone...now it only shows that one album purchase -
I have updated to the latest version of itunes but now i cannot see what i have on my ipod
i have update to the latest version of itunes but now i cannot see whats on my ipod
Hi murr18140,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having with your iPod classic not being recognized in iTunes for Windows:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363?viewlocale=en_US
I hope this information helps ....
- Judy -
I cannot see any of my text boxes in the vertical view.
I just checked the first chapter of my iBook in the vertical display. I cannot see any of my text after the section introduction page. All of it is written in text boxes that I created. I can see all of my widgets and text in the standard horizontal view but when I switch to vertical all I can see is the section introductions and the widgets off to the left hand side. This is a guide to surface palpation. Each page is its own set of instructions instead of being one long piece of continous writing. Is there a way to reformat my text boxes so that they are visible in the vertical view without starting over?
The portrait mode only supports the flow of text (and pictures pasted into the text), and widgets (they will all be positioned on the left).
You need to design in landscape mode knowing how the portrait mode works. Text boxes won't show up in portrait mode. -
I am trying to install Firefox 4 on my Mac OS 10.5.8 and I get the error message "You cannot open the application "Firefox" because it is not supported on this architecture" Help!
Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com -
I had original iPhoto app from 2007 or 2008, but in the last year it stopped working seemingly out of nowhere. Now I just installed iPhoto 9.5.1 but it won't open even after downloading the iPhoto Library Updater. My pictures are lost in the abyss.
I'm using OS Extended 10.9.5. I don't know what the original version of iPhoto was.I just installed iPhoto 9.5.1 but it won't open even after downloading the iPhoto Library Updater
Have you run the iPhoto Library Upgrader? You need to direct it to the location of your old iPhoto Library by clicking the "Choose Library" button in the lower right corner of the panel you are seeing when the upgrade starts. -
Im trying to install windows 7 in on my macbook pro, i thought it just install like intel based PC, so i use windows 7 DVD, i format the harddisk, and installation failed. When i reboot, OS X is missing, because i've format my harddisk. So what should i do to make my MBP is with windows 7
Thanks for all of your help! Big time!
Guys, I been in the business working on PC and MAC for years. So I am not green at this, I was looking for some kind of option to get past the boot loader.. Which is failing.
I know how to boot into these modes.. Done tons of research before posting and couldn't find anything.
It will not go into Internet Recovery, or any thing else. I hear the sound .. then that is it.. I get nothing else..
I have tried clearing the NVRAM which is Option + Command + P + R
Still nothing..
So I thought I would try here to see if maybe there was some trick out there someone might know of that would work.
What else guys? I am hitting th keys right.. -
When going through the download process with social monkee and getting to the point of adding it to firefox I get the following message: 'Social Monkee could not be installed because firefox cannot modify the needed file'. How can this be fixed?
That is usually caused by a missing unpack directive (<em:unpack>true</em:unpack>) in the file install.rdf of that extension.
See https://developer.mozilla.org/En/Updating_extensions_for_Firefox_4.0#XPI_unpacking
----- -
I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great!
The fact that you can receive means you have a valid e mail address, and have established the connection to the incoming server, so all of that works. Since the send does not work, that means your outgoing server is rejecting whatever settings you used formthe outgoing set up. Try them again.
Google your particular isp, and ipad and many times you will find the exact settings needed for your isp. Or tell us here, and soneone else may be on the same isp. Some mail services need you to change a port, or have a unique name for the outgoing server.
Kep trying. -
I just installed iLife on my new iMac 10.8.2 version and now I can't open my iPhoto app. It says it is damaged or incomplete. What can I do to get it back along with all of my picutures? I was told by an Apple employee at my one to one training that it was OK to install iLife to get the iDVD that I wanted. Help!
I have installed iLife a few times and because of photostream, the version on the disc must be updated. Software update usually takes care of it. It sounds like you installed an old version over a new version. I've not tried that.
You have a late 2012 machine, if you open the Mac app store from the dock, you should be able to go to the purchased tab and download/install the right version of iphoto. Honestly, you should not have used that disc on this new of mac or at least only installed iDVD & iWeb but not garageband, iphoto, and iMovie.
If the Mac App Store shows iphoto as installed already, drag the app from your applications folder to the trash and reinstall it again from the Mac App Store. That is the version you need. You may find garageband and imovie have similar problems.
good luck.
PS. your photos are in your photo folder in your home folder. don't touch those, I'm talking about the app "iphoto" in the applications folder. -
I just installed OuickTime 7 Pro in my Mac Pro Ver 10.6.8. The video I am trying to view is codec h264 Compression dvcpro 50 hd. I have audio but no video. It says I need other software with QuickTime for it to work. Dose anyone know what I need?
I just installed OuickTime 7 Pro in my Mac Pro Ver 10.6.8. The video I am trying to view is codec h264 Compression dvcpro 50 hd. I have audio but no video. It says I need other software with QuickTime for it to work. Dose anyone know what I need?
H.264 video should be supported by your basic Snow Leopard operating system. The DVCPRO HD family of codecs is part of the Apple "Pro" codecs package which is normally installed as part of a "Pro" video editing suite installer or contemporaneously installed separately as part of one of the newer pro editing apps like FCPX. if you already have one of these pro suites or apps installed or available, then re-install the correct codec package that is missing. If not, you will need to purchase a Pro suite or app to be able to install the required codec package. -
After a recent hard drive crash I needed to authorise my pc again. I first de-authorised all previous computers (there was no other option)
Then I authorised the pc with the new hard drive.
then I tried to sync
Then itunes tells me iphone cannot sync as pc not authorised.
when I try to authorise the pc, itunes tells me pc is already authorised...
I have been playing this game 10 times now ... "cannot sync because pc not authorised" and then "cannot authorise as already authorised"
what can i do?
thanksyes, a few times. the number of authorised computers decreases and increases from zero to one and vice versa accordingly. yet I am still being told that it cannot sync.
Maybe you are looking for
-
Report with indefinite number of columns
Hello, I'm using VB.NET and Crystal Reports 2008 for my Windows application. I've a new report to implement. It's a budgetting report in a table form, which shows the amount of money allocated to a certain projects over a range of years. In each row
-
Why is my new apple password not fully working?
Why is my new apple password not recognized when updating apps or trying to use Facetime on I-Pad 2? My new Apple password allows me to access my itunes account and download new apps, but I cannot update existing apps or use Facetime. Also, the new p
-
Unable to use dtrace USDT in conjunction with -xipo=2?
We're currently using Studio 12/CC 5.9 and our C++ application includes an internal static library into which we embed several of our own dtrace userland probes (USDT). We're looking at updating to Studio 12.3/CC 5.12 but have run into problems with
-
Iphoto has been lost and cannot be found.
I have lost my Iphoto icon and do not know how to get it back onto my dock. I have checked in the applications folder, the home folder, deleted files, and finder. It seems to have completely dissaperared from my computer and I am not sure how to get
-
My contact pictures on icloud in Microsoft Outlook keep disappearing
My contact pictures on icloud in Microsoft Outlook keep disappearing. Does anyone know why and how to fix. All of the pictures don't disappear, just some of them some of the time?