WIN 7 : Not able to access(CreateFile failed) winusb device if inbox driver is loaded

Hello ALL,
CreateFile API is failed with ERROR_FILE_NOT_FOUND, when winusb comes with composite device.
Description:
i have two Custom winusb devices which supports MS-OS descriptor with the Microsoft DeviceInterfaceGUID ({b35924d6-3e16-4a9e-9782-5524a4b79bac}).
Two custom devices are,
1. USB Composite Device - (Winusb + CDC interface) - CreateFile API got Failed.
2. Winusb Device - CreateFile API got Passed.
So when i insert the composite device into machine, driver loaded automatically from online. But the CreateFile API got failed.
I gottah chance to analyze using WINOBJ tool.
https://technet.microsoft.com/en-us/sysinternals/bb896657
I could see that, when the inbox driver is loaded to the composite device,
Symbolic Link was not shown in
WINOBJ tool. Thats why CreateFile API was failed.
When the inbox driver is loaded to the Non Composite device, Symbolic Link showed in WINOBJ tool. Link was created automatically.
To fix this problem,
I created test signed winusb driver with specific HARDWARE id's, then i loaded that driver for the device, it started working.
Some More findings:
1. If i connect my device under Intel EHCI/xHCI controller with microsoft controller driver, above problem did not occur.
2. Problem only comes when the device is connected under Intel xHCI controller with intel controller driver.
3. Same problem in other link - http://www.osronline.com/showthread.cfm?link=233799
Could you please anyone help what could be the reason for symbolic link was not created if the winusb device comes with composite device?
Because i cannot go with test signed drivers.
Prasannna

> Problem only comes when the device is connected under Intel xHCI controller with intel controller driver.
Complain to Intel?

Similar Messages

I am not able to access old music after a new hard drive install. Wants an old password and I'd

I am unable to sync music to iPad iPhone etc. from 27" iMac with anew hard drive install. Wants an old really old apple I'd and PW that hasn't been in use. What to do?

Hello DeedeeB6075,
Thank you for posting in the Apple Support Communities. It sounds like you have some music that you purchased with an older Apple ID that you don't have access to because your new hard drive needs to be authorized. If you know what the Apple ID is, you can go to https://iforgot.apple.com/ to reset your password.
If you cannot remember the Apple ID, you can follow the steps in this article to find your Apple IDs, and then go to https://iforgot.apple.com/ to reset your password.
Apple ID: Finding your Apple ID
http://support.apple.com/kb/HT5625
I hope this helps get you back on track!
Best,
Sheila M.

HT203163 I am not able to access to iphone updates/store; as secure link to itunes store failed. I tried to turn firewall off, reinstall itunes and other troubleshoot options but none of them works.....

I am not able to access to iphone updates/store; it displays the message under diagnostics 'secure link to itunes store failed'.
I tried to turn firewall off, reinstall itunes and other troubleshoot options but none of them works......
Please help.

Update: I tried the "Toshiba Recovery Wizard" after everything else either fizzled out or hung up. After going all the way thru the recovery process (up to 100%), I finally got an error message.....it didn't work. And now, when I fire up the computer, I don't even get to that menu with the recovery options....the only thing I can boot into is the screens with the various ways to run your OS (in "safe mode", "safe mode with networking", etc).
I'm not a techie, but I'm guessing at this point, the part of my hard drive that got damaged in the fall was, at the very least, the partition with the recovery data. Couple that with the fact that this cheapo Toshiba laptop didn't even come with recovery disk (or ANY kind of disk, even basic installation software!), I'm screwed: I don't see any way to get a workable computer now without some kind of disk to boot from. So NOW my concern is more about spending the $$ for a new OS and THEN finding out the hard drive has other problems too...is broken in some other way to boot.
How to check this? As I said, I did run "chkdsk" back when I could get into the recovery menu and run the fix-it programs. It didn't note any problems. Thinking of taking this opportunity to upgrade to Windows 7 from Vista (which I never liked), but I have to know that the computer is otherwise ok....how to be sure?

Not able to access webservice after migrating from 8.1 to 10.3,plz help

Hi All,
Prev our application was running in weblogic 8.1 and now we moved to 10.3
We are able to deploy our webservice in 10.3 and access the wsdl but we are not able to access the webservice from the client.
Even the testclient is not comming up.
After spending long time in that,now i dont have any clue on this issue.
Plz help on this
Thanks ni advance,
Mouli

Sunil,
We are not seeing any exception.We regenerated the webservice and then deployed in the 10.3
When we make req from the client ,we are getting null response but thing is there are no log trace in the server side for that
folllowing is the input string we are pasing to the method notifyservice
IN the client we pass the wsdl url and then pass the following input string and hit the notifySerivce method
Req:
<?xml version="1.0" encoding="UTF-8" standalone="no"?><object><GLCCode>102431</GLCCode><callBackNumber>888256798</callBackNumber></object>
Res:
<m:notifyService xmlns:m="http://www.testportal.com/outbound/tsp/WowWebservices">
<result xsi:nil="true"/>
</m:notifyservice>
Therre was an exception in the client side,plz check below
javax.xml.rpc.soap.SOAPFaultException: Failed to get operation name from incoming request
at weblogic.webservice.core.ClientDispatcher.receive(ClientDispatcher.java:317)
at weblogic.webservice.core.ClientDispatcher.dispatch(ClientDispatcher.java:147)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:473)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:459)
at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:569)
at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:422)
Thanks For your time,
Mouli

Not able to access DB on VM after getting Reserved IP

Hi,
I have Reserved an Public Virtual IP for my VM 23.102.xxx.xxx The OS WIN server 2012 R2 and and has SQL server 2012 running on it.
Problem:
1. I'm not able to access the DB or connect to the server form outside( from my local machine). I was able to connect when the Public Virtual IP wasn't reserved.
2. As my website is hosted on the same VM, I use the Internal IP address as the Binding IP address, however I recently noticed that the Internal IP address has changed and my website was down.
3. How do I prevent the Internal IP address from changing. So that I don't have to reset my webconfig and binding IP address frequently?

Hi,
Thanks for your question.
1. How did you connect to the VM? I recommend you to use DNS name of the cloud service(xxx.cloudapp.net) with the public port for RDP to connect to see if the issue persists.
2. In general, if you shut down an Azure VM to stopped (deallocated) status, the resources for the VM will be released and the internal IP address may be changed.
3. You can assign a static internal IP address to an existing VM if it is in a virtual network. For more detailed information, please refer to the link below:
Configure a Static Internal IP Address for a VM
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Not able to access the multi-source universe in WebI

Hi
I am not able to access the multi-source universe in WebI, getting below error message.
[Data Federator Driver] Unexpected exception: com.crystaldecisions.thirdparty.org.omg.CORBA.UNKNOWN: null | [Data Federator Driver] Failed to connect to any of the provided 'Central Management Server' hosts.
And also Not able to perform anything to designing multi-source universe in business Layer.
Universe back-end is
Oracle 11g and
SQL2008 DB
Version IDT: 4.1 Support Pack 2
SAP BusinessObjects BI Platform 4.1 Support Pack 2,

Hi Sreeni,
You can create a new APS in CMC containing the Data Federation Service with
-Xmx2g -> 8g (This is the suggested range)
Make sure you remove this service from the existing APS and then create a new one.
You could refer SAP KBA 1694041 - BI 4.x Consulting:- How to size the Adaptive Processing
Server (APS) which would assist you in sizing the APS.
Regards,
Manpreet

Not able to access the Date variable in Bex report after SP upgrade

Hell Experts,
We have upgraded the support pack to 27 and after that we are not able to access date variable in Bex report.
We are not able to restrict the Posting date on variable, we are getting the message "Operation failed! No detailed error information from backend available".
Thanks
Chetan

Hi,
carry out basic checks like RSRV for the field,query ,Infoprovider on which this query is based..
Check whether there is any in consistent value in the posting date..
check whether objects are active correctly..
else serach for SAP note or raise OSS to SAP..
Thanks and regards
Kiran

WHCK - Not able to access Server from client machine

Hi,
Server is running in : \\testserver
Domain : ns.local
Client : testclient
Test Name : TDI filters and LSPs are not allowed
When the above test is run from the server side, Test fails with the following error:
Cause : Failed to Start the Task
Cause : Zero files are copied when Trying to Copy From Path "\\testserver.ns.local\TaefBinaries\x64"....Failing the Task
Failure : Failed to Start the Task "Copy TAEF Binaries"
Cause : Failed to Copy File : "\\testserver.ns.local\TaefBinaries\x64" Dest : "C:\WLK\JobsWorkingDir\Tasks\WTTJobRun6A2E5AF3-8C3E-4425-9997-5B809CAC2BB1\"
Cause : Cannot Find Pattern "\\testserver.ns.local\TaefBinaries\x64"
From WttEa.log , it displays "The network path was not found".
CRunManager::ExecutionAgent: Working Dir C:\WLK\JobsWorkingDir\JobRuns\WTTJobRun6A2E5AF3-8C3E-4425-9997-5B809CAC2BB1
CRunManager::ExecutionAgent: Saving RunXML to file C:\WLK\JobsWorkingDir\JobRuns\WTTJobRun6A2E5AF3-8C3E-4425-9997-5B809CAC2BB1\WttJobRun.Xml
CRunManager::ExecutionAgent: Saving EaDataXML to file C:\WLK\JobsWorkingDir\JobRuns\WTTJobRun6A2E5AF3-8C3E-4425-9997-5B809CAC2BB1\WttEaData.Xml
CRunManager::UserName : DTMShareUser
CRunManager::Domain : TESTSERVER
CRunManager::Password : Server2008,WTT5326ShareUser
Build No Greater than 4000. This is a Windows Vista Machine
Single User TS Enabled
Comparing TESTSERVER testclient.ns.local 10
Logon Netonly
GetUserToken : Returns 0
Error: 0x35, The network path was not found. WTTCreateDirPAth : CreateDirectory \\testserver.ns.local\HCKLogs\EaFolderAccessCheck\CF82A2A5-E08D-49C7-A078-4BA1416F1AA1 Failed File=d:\wtt25\wtt25\sdktools\wtt\jobs\runtime\wttexecutionagent\common\eautil\src\eautil.cpp
Line=1589
Error: 0x80070035, The network path was not found. (Error ( status = 53 ) in call: WttCreateDirPath(lpszTemp) ) File=d:\wtt25\wtt25\sdktools\wtt\jobs\runtime\wttexecutionagent\eamanager\runmanager\src\runmanager.cpp Line=2232
Retrying the log location creation 10 more times
Error: 0x35, The network path was not found. WTTCreateDirPAth : CreateDirectory \\testserver.ns.local\HCKLogs\EaFolderAccessCheck\CF82A2A5-E08D-49C7-A078-4BA1416F1AA1 Failed File=d:\wtt25\wtt25\sdktools\wtt\jobs\runtime\wttexecutionagent\common\eautil\src\eautil.cpp
Line=1589
Error: 0x80070035, The network path was not found. (Error ( status = 53 ) in call: WttCreateDirPath(lpszTemp) ) File=d:\wtt25\wtt25\sdktools\wtt\jobs\runtime\wttexecutionagent\eamanager\runmanager\src\runmanager.cpp Line=2240
What could be the problem ??? What steps need to be done or checked further to proceed ??
Could you please help why the client is not able to access Server ???
Thanks.
Regards,
Pradeep VR

Hi,
Reason for this failure is that the test executable is not present in the HLK controller.
It looks like a Microsoft issue. We have faced same type of problem for other tests also. Our problem gets fixed in HLK 10056.
If you face the problem in current build also, then please log a bug to Microsoft.
Thanks,
Arpo

Adobe Plugin not able to access COM object in Protected mode

We have an adobe plugin for our application. The plugin creates a toolbar button in Adobe and on clicking this button, it invokes one of the form from our application to save the document record for the PDF file in the database. The plugin was working fine till Adobe 9. It stopped working in Adobe X with proctected mode ON. However, if we turn off Protected mdoe, it works fine.
I did some research and found that we need to modify the policy rules by creating ProtectedModeWhitelistConfig.txt file and appropriate registry for it. I did those steps and now I am not getting "Access denied" error when protected mode is ON but the plugin is still not working. On further debug, I found that it fails while trying to connect to SQL Server. It gives error "SSL Security Error". This is working perfectly fine without protected mode. Also It is not able to access COM objects. I guess both these things might be related.
Can anyone let me know what are we missing here?

I would recommend that open a formal support case, as working with Protected Mode is quite complex.

APEX application not able to access

Hi all,
I am new in APEX.
and I have to create the same environment as the client have.
client only given me sql for importing the application developed in APEX.
I created workspace and imported the application in that. but the client is using the active directory authentication and now when i am trying to run the application at my environment then i am not able to access the application.
So could any one of you please guide me what i need to do with the APEX to login to the application with my active directory authentications.
this is somehow urgent and i am not able to get any help. so could anyone guide me.
Sanket
Edited by: user10528895 on Oct 28, 2010 10:46 PM

Hi ajinkya,
Thanks for forwording the helping hand.
but can able to mannage and found some documentas of configuration of LDAP and using the LDAP authentication at my own. and now i configured the LDAP and able to access the application.
now the next step i am stuch is the authentication is of 2 layer 1 i passed but next is there are some of the authorizations schems created and assigned to the specific users.
now if i want to get the information of the authentications schems and where the data store then from where i get the information that is my question
i am using database version 10g 10.2.0 and apex 3.0.1
Regards,
Sanket

Sharepoint 2010 - Not able to access Sharepoint 2010 Public facing site on mobile browsers

Hi All,
Earlier, I posted a similar question in the forum , but did not get appropriate response . Posting it again with some more information .
We are not able to access Sharepoint public facing site on Mobile browsers like chrome, IE, Safari (However the site is working fine on Firefox mobile browser and on PC/Laptops as well .)
Following is the error we are getting :
"Cannot set custom attribute on mobile controls in this page. Custom attributes specified are Access Key=0."
I checked in the event logs , following was the exception :
Exception captured in Exception HttpModule: System.Web.HttpException: Server cannot append header after HTTP headers have been sent.
   at System.Web.HttpResponse.set_RedirectLocation(String value)
   at Microsoft.SharePoint.Utilities.SPMobileUtility.Redirect(String url, SPRedirectFlags flags, HttpContext context, String queryStrings)
   at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.HandleMobilePageRequest(HttpContext context)
   at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea)
   at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
   at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Also, there was a microsoft OS security patching on our farm servers post which the error starts coming . Following were the patches that were installed
1. MS14-005
KB2916036          Security Update for Windows Server 2008 R2 x64
Edition (KB2916036)
MS14-009
KB2898857          Security Update for Microsoft .NET Framework 3.5.1
2. on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems
(KB2898857)
3. MS14-009
KB2901112          Security Update for Microsoft .NET Framework 3.5.1
on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems
(KB2901112)
4. MS14-009
KB2911501          Security Update for Microsoft .NET Framework 3.5.1
on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems
(KB2911501)
5. MS14-011
KB2909210          Security Update for Windows Server 2008 R2 x64
Edition (KB2909210)
6. MS14-012
KB2925418          Cumulative Security Update for Internet Explorer 8
for Windows Server 2008 R2 x64 Edition (KB2925418)
7. MS14-015
KB2930275          Security Update for Windows Server 2008 R2 x64
Edition (KB2930275)
8. MS14-016
KB2923392          Security Update for Windows Server 2008 R2 x64
Edition (KB2923392)
Has anyone of you ever faced similar(site not opening on mobile browsers) issue after installing these patches on farm servers .
Any help would be much appreciated .
Thanks
Saquib Khan

We have found below error related in ULS as well as event viewer both :
Exception captured in Exception HttpModule: System.Web.HttpException: Server cannot append header after HTTP headers have been sent.
at System.Web.HttpResponse.set_RedirectLocation(String value)
at Microsoft.SharePoint.Utilities.SPMobileUtility.Redirect(String url, SPRedirectFlags flags, HttpContext context, String
queryStrings)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.HandleMobilePageRequest(HttpContext context)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea)
at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Saquib Khan

User has contribute access but he is not able to access the site collection...

User has contribute access but he is not able to access the site collection...

What error does he get.
Can you share fiddler trace(check if any 404 error)
what error do we see in ULS Logs
Create disableloopback
registry on server
http://support.microsoft.com/kb/926642/en-us

Not able to access blackberry world on Z10. what could be the reason?

not able to access blackberry world on Z10. what could be the reason? It wasn't issue earlier but facing it from last two days.

Please guys read other forums on this community before posting redundant issues.
Try this fix
Go to the games app.
At the bottom tap on games.
At the right bottom, you will notice three dots. Tap the dots
Tap the option to enter the blackberry world. Wait until the screen is loaded
Swipe right to Enter My World - > My Apps and Games.
Tap the three dots again to check for updates.
Update all the apps and close your App World.
Try accessing the app world in the standard way. Everything mus be fixed by now.
Twitter: @ukmight
1. Click on the " Like " button if you find anything helpful posted.
2. If any of the replies in your post has resolved your problem, mark the reply(ies) as " Solution ", so that others can readily view the solution instead of creating another redundant post.

I am not able to access my photos through the photo application... when I click on the photo app, I can see the camera roll but a transparent album screen is over it and I cannot click on the photos to see it... can any one please help ???

I am not able to access my photos through the photo application... when I click on the photo app, I can see the camera roll, but a transparent "album" screen is over it and I cannot click on the photos to see it... can any one please help ???

Known bug. Quit the Camera App, double-tap the home key and delete Camera from the recent apps bar. Fire it up again, should be good.

User has appropriate permission, still not able to access one of the sharepoint site applications.

Hi,
I have tried all solutions available on internet regarding this problem but none seems to work.
As per one solution I added the user in sharepoint site collection administrator group still no luck!
As per another solution I tried to run “User Profile Service Application Proxy – User Profile to SharePoint Full Synchronization”
“User Profile Service Application Proxy – User Profile to SharePoint Quick Synchronization”
but they dont run for some reason. Both these jobs are scheduled to run everyday but last time they ran was some date in 2011. When I click on Run Now nothing happens.
I deleted all cache, forms password history everything. Added the site in trusted sites and all. No luck!
User also tried to access the site by logging onto another system but still same issue.
This user recently joined alongwith a few more people. All of them are able to access the site except this particular user. So, a web part or unpublished page cant be the reason, right?
This user is only able to access the home page which is say http://<siteurl:1234> application while the site which this user is not able to access is
http://<siteurl:2345>.
I even tried to give access through sharepoint designer but no luck! Please help!
PS: This may not be relevant but still I'm sharing. Earlier I used to add users in manage user profiles - new profile. But now as soon as the user is added into active directory there profile is getting created automatically. This might be happening due to
active directory and user profile sync but the question is how? Because I dont remember configuring this. And it was not configured earlier too.

Hi,
According to your description, my understanding is that only one user cannot access the site even though he has the right permission.
I recommend to verify the things below:
Check the permission of the user in the site to see if the permission is right.
Is http://<siteurl:2345> a new site collection ? Can the user access other pages except the home page in
http://<siteurl:1234>?
Grant needed permission to the user in the web application to see if the issue still occurs.
Delete the user and re-add the user in AD to see if the issue still occurs.
Check the ULS log for detailed error message.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

WIN 7 : Not able to access(CreateFile failed) winusb device if inbox driver is loaded

Similar Messages

Maybe you are looking for