Win 7 pro 32bit on early 2006 mac pro

do i have a chance at installing this without reburning the cd a la jowie?

frostnolf wrote:
I am wondering that is it possible to install win 7 to part of my hd and get it back to combine with my original partition when i decide to uninstall win 7?
Yes. You can use Boot Camp Assistant to create a Windows partition to install Windows 7 on and then use Boot Camp Assistant to uninstall and remove the Windows partition.
Another but less important issue is can i use my magic mouse's wheel feature in win 7 cause i tried to use on a pc today and it didn't work. only left and right click worked.
Can't answer because I don't have a magic mouse.
And last, can you name the most common problems if I try to install win 7 to my mac or there is no known issue it is just perfectly working?
In general and with my installation of Windows 7 I have not experienced any troubles.

Similar Messages

What video cards are compatible with my early 2006 Mac Pro?

The video card currently in my early 2006 Mac Pro (2.6 GHz, dual-core) isn't fast enough for many of the recent games and I'd like to upgrade. I play games both on OSX Snow Leopard and Windows XP via Boot Camp. Is there a list of currently compatible cards available somewhere?
Thanks.
-N
Neil Marsh
Artistic Director * The Post-Meridian Radio Players *
<Email and Link Edited by Host>

No, not really.... but a couple of tips...
1) when you're pulling the old card out, remember there is a black plastic retainer clip at the inner (front of computer) end. I didn't notice that, and now it's broken.
2) Get the 5770 from Apple, not a big box store.... those don't come with the power cable you need and may not work.
3) Plug the power cable into the mother board (?) first. It's fiddly, especially if you have big hands.... then plug it into the card, then slot it into the computer.
There are demos on youtube, but they all seem to miss out the fiddly bits.....!

Why are there so many problems with the early 2008 Mac Pro ???

Hi everybody out there using Mac Pro's early 2008,
I found out there is a lot of problems with the early 2008 Mac Pro.
My early 2008 Mac Pro has been repaired ones under warranty and now it stopped working again ! Also see under: Mac Pro early 2008 no chime and does not start up. Why is this ????
It worked well for about 2 years and then it just fails and i had this failing issue twice already !!! Is this just a BAD Apple product or how do you think I need to approach this. Let’s face it, these machine don’t come cheap and you at least expect them to work without problems for 4-5 years. What is happening here ???
Cheers, Kavango

go to a black screen after 15 minutes or a couple hours
That is probably an indication that you need to find a new graphics card.
RE: Mac Pro Replacement Graphics cards
1) Apple brand cards,
2) "sold in the Apple store" cards, and
3) "Mac Edition" cards ...
... show all the screens, including Boot up screens, Safe Mode, Installer, Recovery, debug screens, and Alt/Option boot screens. At this writing, these choices include:
1) Apple brand cards:
• Apple-firmware 5770, about US$250** works near full speed in every model Mac Pro, Drivers in 10.6.5
• Apple-firmware 5870, about US$450
2) "sold in the Apple store" cards
• NVIDIA Quadro 4000, about US$1200
• NVIDIA Quadro 5000, about US$2500
3) "Mac Edition" cards -- REQUIRE 10.8.3 or later:
• SAPPHIRE HD 7950 3GB GDDR5 MAC Edition, about US$480** Vendor recommends Mac Pro 4,1
• EVGA GTX 680 Mac Edition, about US$600
The cards above require no more than the provided two 6-pin aux power connectors provided in the Mac Pro through 2012 model. Aux cables may not be provided for third-party cards, but are readily available.
If you are Meet ALL of these:
• running 10.8.3 or later AND
• don't care about "no boot screens" etc AND
• can re-wire or otherwise "work out" the power cabling, THEN:
You can use many more cards, even most "PC-only cards"

Early 2008 Mac Pro - Can't load Boot Camp drivers for Win 7 64

Trying to install Win 7 64 bit on my early 2008 Mac Pro. I downloaded the Boot Camp drivers 4.0.4033 and installed them on a USB drive but, for some reason, when I try the install them during the process, I get a message that my hardware is not recognized. Skipping the driver loading process, I am able to install Win 7 but when the system trys to restart to continue the install, I get a message "disk error, press any key to restart". Pressing any key does not get me anywhere. I went through the Win 7 repair process and again tried to load the drivers with no luck.
Any thoughts would be appreciated.
Thank you,

That article was also my starting point and I have followed those steps again and again and again. I haven't slept, I haven't done anything other then try to make it work for more hours than I can count. I came here for help because that solution is not working for me.
The region and keyboard type settings simply don't have the Apple keyboard layout listed. As I said, someone on the Fusion forum tried to follow the article's instructions too and he managed to get it working because he COULD run setup.exe (Boot Camp Drivers) on his machine, and I CAN'T. Yes, it is all explained in that article... but the drivers WON'T INSTALL, I get an error message saying "This version of Boot Camp is not intended for this computer model".
First you said it wasn't physically possible for me to install the drivers, then you said I should just follow the article. Well, the article clearly says "Install the Boot Camp Windows device drivers in the virtual machine" which you just said couldn't be done! I want to cry. I should have just bought a second laptop, this is too painful.

Is there a way to install boot camp on a 2006 Mac Pro running Lion?

Lion comes with Boot Camp 4, which supports Windows 7+. The 2006 Mac Pro however only supports Windows Vista, which requires Boot Camp 3.
I can't find a download link for Boot Camp 3, only 4 and 5.
Does anyone have an idea?

It is on your original dvd that came with your computer. See the Boot Camp System Requirements located here: http://support.apple.com/kb/HT5634
Look for your computer to determine what support software version is supported and where it is located.
Mac model
Windows 8, 64-bit
Windows 7, 64-bit
Windows 7, 32-bit
Windows Vista, 64-bit
Windows Vista, 32-bit
Windows XP, 32-bit
Mac Pro (Late 2013)
5
Mac Pro (Mid 2010)
5
5
4
DVD
DVD
DVD
Mac Pro (Early 2009)
5
5
4
DVD
DVD
DVD
Mac Pro (Early 2008)
4
4
DVD
DVD
DVD
Mac Pro (Early 2007)
DVD
Mac Pro (Mid 2006)
DVD

2006 Mac Pro (OSX 10.7.5) and USB 3 speeds

I'm considering the purchase of a HighPoint RocketU 1144CM USB 3.0 PCIe card and would like to know if there's anything in the architecture of my 2006 Mac Pro [Build 1,1] which might limit throughput speeds to USB2 standards. The manufacturer's [HighPoint] website claims compatibility with OSX 10.7.5 (my current operating system) but does not make any mention of the year in which the computer was built. Will I be able to obtain USB 3.0 speeds or would I just be wasting my money? Any insight would be greatly appreciated. Thanks.

There have been more limitations and choices in support for even the 2008 and earlier.
Chipsets change, some use drivers and drivers that support 32-bit kernel and a smaller number of users, have hampered choice.
I was using two Sonnet SATA II controllers, the E2P and the E4P. Those worked and of course speed was fine, as was ejecting, sleep and other features and behavior. The Allegro has probably changed over the years and there are cheaper alternatives.
www.xlr8yourmac.com does have readers reports in a database and write-ups.
It has also been discussed here many many times, and on MacRumors forum for the Mac Pro.
What is the state of USB 3.0 on Mac Pro? ( 1 2 3 4 5 6 ... Last Page)
Highpoint can be iffy in support. As to USB2 speeds, only if the device(s) are a factor, and Allegro does not support hubs or non-storage devices (phone, tablet, card readers etc)

Boot camp on 2006 mac pro

I am trying to set up my 2006 Mac Pro 1,1 to run Win XP with boot camp. I used the original Tiger install disks to put OS 10 (10.4.11 after software updates) on the machine.
Now I want to run Boot Camp assistant, but can't find it in the Utility folder, and furthermore, I searched for "boot camp", and did not find it on the computer.
Did I misss something in the install? Years ago when the machine was new, I clearly remember Boot Camp assistant (beta?) in the Utilities. Can someone help, and more to the point, tell me how to install Boot Camp Assistant.
Thank you for your consideration.....

BETA. It was not included, and expired in 12/31/2007.
Currently requires 10.5 or later.
Boot Camp
Apple Boot Camp Support

Early 2008 Mac Pro - worth bothering with?

Hi,
Someone in my building threw out an early 2008 Mac Pro with no hard drives.
I put in a spare that I have lying around and it seems ok -- but a bit slow. I'm now in the process of installing Mavericks on it.
I'm curious if this computer is worth bothering with? If so, what are some essential upgrades that would make this hum? I'm assuming an SSD? Should I bother finding extra ram for it (it has 4gb now).
What would be some good uses -- I already have an apple tv and a htpc in the living room.. I suppose I can use it in the bedroom? Can this be a functioning secondary computer for my wife who doesn't game but does use iPhoto/Word/Netflix etc? And if so what should I add?
Thanks everyone for your help!

alphaace wrote:
If my wife just watches netflix/browser/word etc --- no games -- but does do a heavy bit of photo editing -- should I upgrade the gpus?
And if so, what would everyone recommend?
Also, I need to buy some hard drive caddies (only one left in it) -- however, I need a converter to put in a ssd right (as they are 2.5")? Any recommendations on those?
I have been able to find Mac Pro drive caddies on eBay. Here's one that would get you a set of 4:http://www.ebay.com/itm/Apple-Mac-Pro-Hard-Drive-Sled-Caddy-Complete-Set-1-4-Mac -Pro-2006-2008-/111386524693?pt=US_Drive_Bay_Caddies&hash=item19ef277c15. The screws appear to all be there.
In terms of adapters, this one was in my 2006 Mac Pro when I got it, and it seemed to work fine, although I didn't keep it in there very long:
http://www.amazon.com/Icy-Dock-EZConvert-2-5-Inch-Converter/dp/B002Z2QDNE
OWC sells a couple of 2.5" drive adapters also.
I wouldn't worry about upgrading the graphics until your wife has had a chance to do some photo editing on it. You may not need to upgrade the card for a while, if ever.

Early 2008 Mac Pro Raid + Radeon 4870

So far this has been a very disappointing experience in upgrading to SL!
I have an early 2008 Mac Pro with Apple software RAID as my boot drive, SL of course is not seeing this as a possible install drive as others have experienced. I have tried to boot directly off of two different SL retail upgrade disks but the installer crashes every time (I've verified that the drive boots off of other disks). I'm starting to suspect that it may be an issue with the Radeon 4870, has anyone else with a similar setup had any success in upgrading to SL? I'm going to try installing the original video card to see if that helps, otherwise it looks like I will be doing an install to a new hard drive from within Leopard.

I've got a 2006 Mac Pro, the first gen one. I've got a flashed PC 4870 and a three disk software raid of 640GB Western Digital HD's, Model: WDC WD6400AAKS-00A7B0. When I ran the install disk from Mac OS, I couldn't install to the raid, it didn't show up as a volume that could be installed to. However when I restarted from the DVD I had no trouble installing onto the raid at all. The install finished without a hitch. I also ran an install to my Intel X25-E and didn't have any trouble there either. So I know it is possible to get the install to work with a raid and a 4870.
Obviously my setup isn't exactly like yours though. But that's the best I can do.

Are there two versions of early 2008 Mac Pro ?

Hello.
I recently got a new fans set for my early 2008 Mac Pro apple part 922-8497.
When I wanted to replace the front double fan thing I learned that my case uses screws to fit the fans element.
The fans element I got was without screws and doesn't fit.
Even though it is called "early 2008 Mac Pro front fans"
What was I doing wrong ?

Following fan is the same fan as you got?
http://www.gomacpro.com/mac-pro-front-fan-w-pci-card-guide-922-8497/
They say the fan is for Mac Pro Late 2006 and Mac Pro Early 2008.

2006 mac pro 2.66 in need of an airport card!

Hi Does anyone know which airport card or cards, as well as bluetooth, will work in an 2006 mac pro? I have read that MA688Z/B is the proper card. I have tracked down a MA688Z/A: http://www.macproonline.com/Mac-Pro-Tower/Mac-Pro-Tower-Parts/Mac-Pro-Tower-667M hz/Apple-AirPort-Extreme-p5636018.html
Found this on Amazon: http://www.amazon.com/Apple-Airport-Extreme-Bcm94321mc-802-11n/dp/B004OHOTJS/ref =sr13?ie=UTF8&qid=1300723614&sr=8-3
Can anyone verify which airport card to use for a 2006 mac pro model?

Hi cmotta12,
You might find this thread (Purchasing/Installing Airport Extreme card for Mac Pro 1,1 (2006) of interest:
http://discussions.apple.com/message.jspa?messageID=12830939#12830939
One important thing to note is that the official Apple Airport Card Wireless Upgrade Kits come complete with the two micro screws which are needed to install the card.
These screws are not readily available, so ensure that they are included when you buy your Upgrade Kit.
Regards,
Bill

TS3048 My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work). "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
That will let you select the "turn on Bluetooth" icon.

How do I properly zero out or erase the hard drives in my early 2009 Mac Pro 4,1 tower?

How do I properly zero out or erase the hard drives in my early 2009 Mac Pro 4,1 tower?
I assume there are already instructions on Apple.com someplace but haven't seen them yet… I have to one terabyte drives one the operating system the other is blank I want to start fresh I want to zero out both drives but I didn't want to make any mistakes
I know I can use disk utility to 0 Out Dr., #2 that means I will have to take out the operating system hard drive out of my 2008 Mac Pro and put it into my 2009 Mac Pro to use the disk utility to zero out drive one the OS drive in my 2009 Mac Pro am my correct
I just need a little bit a help I want to go slow so I don't make any mistakes with the sleds or with the erasing process which journaled to choose encrypted or not etc. etc.
Furthermore is there instructions on the site on how to change the hard drive into a different sled because the sleds and my 2009 are different than my 2008 any advice
Thank you

I'm doing this because my friend told me that zeroing out the drive can nap bad sectors and also later for some kind of diagnostics usage of the drive or something like that he wasn't really clear
My friend was really specific he said choose the option that writes zero's once over the drive that is plenty good enough I was inclined to use the maximum seven write ...I just want to make sure the drive has no bad sectors and that's it's it's zeroed out for possible future diagnostics usage or something that he said was usable later
he also advised me to run a test on it but I don't have the software you mentioned or the software that he has… So I may have to take the drives over to his house unless you have some kind of free software that's easy to use that you could suggest that will not only zero out the drive but test the drive completely
I am completely new to Mac I'm no dummy but at the same time I'm not super technically capable I mean I can surprise myself I'm pretty good but I need a good teacher… How expensive is this lifeguard software?
Thank you

Questions about ati radeon 2600 on an 2006 mac pro

I know the debate has been going around for awhile about these cards, Apple claims that they are not supported but my card runs as long as you have leopard installed. So far the card has performed great, all my games and graphics programs run beautiful with it but I do have two problems. One is I can only have my display set at 1400 x 1050 any lower setting results in severe blurring on the screen. The other problem is that the text on my screen is some what pixelated and blurry.
I was wondering if there is a fix for this problem or is it just the price I have to pay for running it on a 2006 mac pro.

If it is a problem, and you can afford another upgrade, the Radeon 3870 might be your best choice.
http://www.barefeats.com/harper17.html
http://www.barefeats.com/harper18.html
http://eshop.macsales.com/Item_XLR8YourMac.cfm?ID=10876&Item=ATI100435928

My Early 2009 Mac Pro won't restart after installing Mavericks

I have installed Mavericks on my Early 2009 Mac Pro and all seemed to install just fine but when I restart the Mac then it won't get past a grey screen with Apple logo. It seems that it does get reasonabley far into the startup, it gets passed the grey screen with cricling progress thingmy under the Apple logo, then it flashes very quickly and after that it is a grey screen with the Apple logo and no further.
I did try installing Mavericks when it first came out and I had this problem so I just abandoned and reinstalled Mountain Lion from my Time Machine backup. However I thought that with Mavericks now at 9.1, maybe it would work okay this time but no change. However this time I do want to get it working because the lastest Final Cut Pro X requires Mavericks and I do a lot of video editing.
Here are the things I've tried which have made no difference:
Removed all peripherals, so that now nothing is plugged in except the original Apple Keyboard, my Apple trackpad and my Eizo monitor.
I tried starting it in Safe Boot mode but this made no difference.
I started it up in Recovery mode and it will start in Recovery mode. While in Recovery mode I checked the startup hard drive with Disk Utility, the drive is fine, as and I repaired disk permisions which made no difference.
I zapped the PRAM.
I connected it to my MacBook Pro in Target Disk mode and used ProSoft's Drive Genius 3 to check over the startup hard drive again and check disk permissions and all is well.
It still will not startup
I would be most grateful if someone could assist.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 3
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 4
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 5
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 6
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 7
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 8
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 9
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 10
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 11
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Win 7 pro 32bit on early 2006 mac pro

Similar Messages

Maybe you are looking for