Win 7 Pro error R6034 after itunes 11.4

I just installed itunes 11.4 on my Win 7 Pro system, which has all patches up to date. After installing, all itunes services and itunes itself get the following error: application has made an attempt to load the C runtime library incorrectly. (I *did* run the installation as administrator, and my user id is in the administrator group.)
Any ideas how to fix this?
TIA

Try complete uninstall and reinstall per this article.

Similar Messages

Error code after itunes update -42404

error code after itunes update -42404 cannot connect to ipad it is telling me to restore ipad, and cannot connect to store...
Message was edited by: CFC.Steve

I assume you updated itunes on your computer. PC or Mac?
Look at the posts in the More Like This area to the right side of this page.
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
 Cheers, Tom

After the last Itunes update I have been getting runtime errors R6034 now Itunes will not launch,, after the last Itunes update I have been getting runtime errors R6034 now Itunes will not launch

After the last itunes updatei am getting runtime errors R6034 my OS is windows vista
I have uninstalled and reinstalled Itunes several times

Hello, Desfromnotts.
Thank you for the question. Try uninstalling all components of iTunes in the order specified of the article below. Once this is done attempt to install iTunes again.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
You may need to process the steps in the article below for each component when uninstalling iTunes if the issue persists.
"The feature you are trying to use is on a network resource that is unavailable" alert when removing Apple software in Windows
http://support.apple.com/kb/TS3704
Cheers,
Jason H.

Widows 7 runtime error R6034 installing iTunes

For the last 5 years I have had my iTumes account on a Gateway XP dual core x64 computer. From this account I have added 5 iPod containing my 38G music collection, an iPad, iPhone3, and recently Apple TV. According to the info provided on my account only the iPhone 3 and the iPod nano which has been missing for 3 years are on my account. All the other devices are working as long as they are charged. In the process of installing a update 2 weeks ago things went South. First message at install : mobile device not found - not sure if this was the missing Nano. Clicked ignore, and then run time error R6034 appeared for both iTunes,exe and iTunes\helper.exe. R6034 states An application has made an attempt to load the C runtime library incorrectly. Please contact application support. {itunes help is one of the programs not responding} The final message was iTunes was installed incorrectly,please reinstall. After restoring from 3 weeks ago, deleating iTunes completely and then iCloud from this computer the problem has persisted and now I no iTunes on this computer. Anyone, including Apple techs staff who should be answering the problems they create, have a solution? I have 2 other Widows 7 computer [x64] which I can transfer my iTune backup data to the iTune program which have not be associated with the satilite Apple TV, iPods,Pad and phone. Your help for an old man trying to keep up with this ever changing software will be greatly appreciated.

Fix *Runtime Error R6034* - Windows® Help Center
Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

Itunes 7 - win xp pro will not install "iTunes needs quicktime" error

iTunes 7 will not complete the install - it says the old version of iTunes could not be uninstalled and then says "iTunes needs quicktime". I tried installing quicktime alone and it also won't install saying it cannot remove the old version. Tried a manual uninstall and I get the same error.

A tip posted by b noir on the following link solved my problem. I just downloaded "Windows Installer CleanUp Utility" from Microsoft, removed my existing version of Qiucktime. Restarted my computer then started fresh with Itune 7 installation. No more problems.
here's the link:
http://discussions.apple.com/thread.jspa?threadID=643006&tstart=0
Hope this helps. Good luck.

Solving error 5002 after itunes update

anybody else have similar issue after updating the itunes software?

I assume you updated itunes on your computer. PC or Mac?
Look at the posts in the More Like This area to the right side of this page.
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
 Cheers, Tom

HELP! Error message after itunes 10.2 update + ipad will not appear on Macs

Everything was fine until I tried to update to 10.2. Error message appeared and ipad lost sync. Now ipad does not show on computer when itunes opens. Also ipad missing several apps from screen.
How/why the heck did this happen????

See this support document for error codes. Resolve iOS update and restore errors - Apple Support The 39 does not appear, but there is a 37 and 40, so I would believe it is close to that.
If you are having trouble updating, you need to check this support document for that. You may need to put the device into Recovery Mode.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
It could also be the security software on the Windows PC. Another question, is the device jailbroken?

Error message after iTunes upgarde

I just upgraded iTunes to 9.0.2 but now when I try to open it, I get the following error message: "The file "iTunes Library" cannot be read because it was created by a newer version of iTunes."
Everything worked well until I upgraded. This message is confounding since to my knowledge there is no newer version than 9.0.2???

Well, I thought that the iTunes upgrade had something to do with my inability to burn CDs. I can't say for sure that was the case but I do know that what fixed my problem (if you can believe this) was installing the QuickTime update. I'm thinking that the iTunes update corrupted something, but installing the QT update corrected the problem. Now I can burn with no problems whatsoever. You may want to give it a try.

Error message after iTunes upgrade

The error message reads:
"The attempt to burn the disc failed. The device failed to calibrate the laser power level for this media."
What does this mean?
I am using the same discs as I always have. I just installed the latest upgrade. version 6.0.5
imac Mac OS X (10.4.4)

Well, I thought that the iTunes upgrade had something to do with my inability to burn CDs. I can't say for sure that was the case but I do know that what fixed my problem (if you can believe this) was installing the QuickTime update. I'm thinking that the iTunes update corrupted something, but installing the QT update corrected the problem. Now I can burn with no problems whatsoever. You may want to give it a try.

Win 7 Pro, 64 bit, with iTunes 10.4.1.10

I have iTunes 10.4.1.10 on Win 7 Professional, 64 bit machine. When syncing with my iPhone 3Gs, the iTunes "INFO" button yields blank screen. No text or information is shown. Worked just fine previously!

Hello nicolini,
It sounds like iTunes quits unexpectedly everytime you try to open it so you can no longer use it. I recommend the troubleshooting steps in the following article to help you troubleshoot the issue here, named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
Start with these steps to open iTunes in Safe Mode to see if a 3rd party app may be interfering with iTunes. There is additional troubleshooting to be done in the article if this is not the case:
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Win 32 appilication error while running Itunes 7 setup

Does any one have a solution to the error "Itunessetup.exe is not a valid Win32 Application" while running the new Itunes setup.

Finally an asnwer from Apple:
Dear Stefanie,
I understand that you're receiving an error when trying to open the iTunes
installer that you downloaded. I'd like to try to help you resolve this issue.
It appears that your web browser may be truncating your download of the iTunes
software. I urge you to try using a different web browser to download iTunes. If
this is not possible, you can also try using a different computer to download
iTunes, and then transfer the iTunes installer file (iTunesSetup.exe) to your
original computer and open it from there.
Some transfer options would include using your iPod to transfer the file via
hard disk mode, using a local network, burning a CD, using an external hard disk
or a USB drive, or even sending the file to yourself via email or over an
instant messaging network.
I hope this information helps to resolve your iTunes installation issue. If it
does not and you still need assistance from Apple, you will need to call Apple
technical support (there may be a fee associated with the call). To find the
appropriate phone number, please visit:
http://www.apple.com/support/contact/phone_contacts.html
Sincerely,
Andrew
The iTunes Store
http://www.apple.com/support/itunes/ww/
hopefully this helps you guys

Help - error message after iTunes update

I have a Windows 7 PC
I updated iTunes about four days ago and got an error message.
What should I do to correct this annoying issue?
AppleSyncNotifier.exe - Entry Point Not Found
The Procedure entry point xmlTextTeaderName could not be located in the dynamic link library libxml2.dll

Many thanks.
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

TS4194 APSDaemon.exe error even after iTunes 11.1.4.62 re-installed for Windows XP, Vista or Windows 7

I've uninstalled, restarted and re-installed iTunes 11.1.4.62. I've "unchecked" the Apple Push to no avail. iTunes will not open or run and I continue to get error messages.
"Application has failed to start because MSVCR80.dll was not found. Reinstalling may fix..."

Found the fix myself:
http://pcsupport.about.com/od/findbyerrormessage/a/msvcr80-dll-not-found-missing -error.htm
If, and only if, you're receiving the msvcr80.dll is missing error when you open Apple iTunes, do the following: (skip this step if your msvcr80.dll error is occurring with a different program)
Uninstall from Windows the following five programs in this order: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, and finally Apple Application Support. If you have iCloud, remove it as well.
Download the latest version of iTunes from Appleand note the location you're saving it to so you can find it once it's done.

Itunes 9.1 for windows causes visual c++ runtime error r6034

howdy y'all,
my setup ...
os = win xp pro, sp3, current patches installed
itunes = 9.1.0.79
the original update was thru the apple software updater. after the error showed up on 1st start of itunes, i ...
= rebooted the system = no fixee
= uninstalled itunes, rebooted, reinstalled itunes, rebooted = no fixee
since i updated to 9.1 i get the following errors at itunes startup ...
[1] visual c++ runtime error r6034
after i hit ok for item [1] i get ...
[2] itunes cannot sync information ..SNIP.. because syncing has been disabled on this computer. do you want to enable syncing?
if you do not enable ..SNIP.. to your ipod.
after i hit yes for item [2] i get ...
[3] itunes was unable to load provider data from sync services. reconnect or try again later.
after i hit ok for item [3] itunes runs.
the itouch shows up in the left panel "devices" list and is selectable. pressing the sync button on the itouch summary page triggers TWO dialogs of item [1]! hitting ok on them lets the sync go forward. i presume the only actual sync going on is the music. the sync finishes with no errors and says "ipod sync is complete. ok to disconnect."
i haven't tested to get confirmation that anything is being synced so it might just be going thru the motions.
item [1] is listed on the ms site here ...
http://msdn.microsoft.com/en-us/library/ms235560%28VS.80%29.aspx
it says the error is caused by a missing "manifest" and the fix is to rebuild the app with a proper one.
links to the 3 error msg screen captures ...
http://img163.imageshack.us/i/itunes91startuperror01.png/
http://img6.imageshack.us/i/itunes91startuperror02.png/
http://img408.imageshack.us/i/itunes91startuperror03.png/
otherwise, itunes runs in its usual slothful [on windows] and crash-prone [on windows] manner.
help, please?
take care,
lee
Message was edited by: Lee Dailey
Message was edited by: Lee Dailey
Message was edited by: Lee Dailey
Message was edited by: Lee Dailey

Hi all,
I could resolve some of the issues posted here with the fix offered by jeffcoffee under http://discussions.apple.com/thread.jspa?threadID=1595916&start=285&tstart=0 (However, I still have the R6034 error message. Would be great to have a fix for that too).
This is what he did:
copy the file 'sqlite3.dll'
from 'C:\Program Files (x86)\Common Files\Apple\Apple Application Support'
to 'C:\Program Files (x86)\Common Files\Apple\Mobile Device Support'
*In a 32 bit Windows OS remove (x86) from the path.
Another potential dll issue might be: 'libxml2.dll', follow the same copy routine. If the first one does not fix it.

ITunes Error 7, (windows error 1114) runtime library error R6034

Need help, update failed, iTunes Error 7, (Windows error 1114) runtime library error R6034, lost iTune library.

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Win 7 Pro error R6034 after itunes 11.4

Similar Messages

Maybe you are looking for