Win 7 RC missing driver for HDSPA erricsson f3507g

I have just made a upgrade of my W500-4063-B18 to windows 7RC,  32bit. I have no driver for my HDSPA modem, anyone there have found a solution??
Borgmesteren

"the application was not build for this platform"
This means that one of two drivers are missing. 
I think it's the System interface driver, found here:
http://www-307.ibm.com/pc/support/site.wss/WIN7-BE​TA.html#sid
If that's  not right its this one:
http://www-307.ibm.com/pc/support/site.wss/WIN7-BE​TA.html#tpmd
Thinkpad power management driver. 
Had the same problem myself

Similar Messages

  • Win 7 x64 Driver for a 32bit CF Cardbus Adapter (x61)

    Does anyone know where I can get a Win 7 x64 driver for a 32bit CF cardbus adapter mounted in the Lenovo x61 internal multicard reader?
    I am running Win 7 x64 on a Lenovo X61 7675-CTO.  I have an Viking 32 Bit High Speed Compact Flash Cardbuss Adapter inserted in the internal multicard reader.  When I insert a CF card in the reader, I get  "Mass Storage Controller" and "drivers for this device are not installed" error indicators from the Windows Device Manager.   
    This configuration was working fine for me under Win XP x32.  I read the suggestion posted to another thread that one can downgrade to Win 7 x32, but I am hoping for a X64 solution.  I have already installed the "6iio10ww" Intel Matrix Storage Manager Driver for Windows 7 (64-bit).  The problem seems to be that Viking has not released a x64 driver for this product.  It seems Microsoft should have installed the proper driver during the OS install since this device was around before the Win 7 was introduced.
    Can anyone suggest a source for the proper driver or an alternative CF card cardbus adapter known to work with Win 7 x64 OS?

    Thanks!
    Apologies for now double-posting: new thread

  • How can i download win 8 64x driver for mac early 2011

    hi my friends
    how can i download win 8 64x driver for mac early 2011

    How did you download it? Did you download it from withing Boot Camp Assistant and save it in accordance with the instructions? How did you try to install it? You install the Windows Support software from within Windows. Did you read and follow the Boot Camp installation guide and help files?

  • Missing driver for Tecra A11

    Hello,
    I have a Toshiba laptop, model Tecra A11, part No. PTSE3U-05Q01P
    I have an issue with the operating system, Windows XP SP3, it doesn't recognize a device from the laptop and shows the Hardware wizard from Windows XP.
    The computer worked without problem since the purchase but now ocurred this issue.
    We have tried the automatic install provided by Windows with no avail. Windows didn't install the driver.
    In the Windows device manager, we see a device with a exclamation mark, as "Unknown device".
    In the properties dialog of such device, Windows reports that it have no driver installed.
    In the Details tab, the system shows de Device Instance ID: ACPI\IFX0102\4&375529C7&0
    In the Toshiba website, in the support section, there are many available downloads, but we don't know which file is the required to solve the problem.
    Thanks for any help you can give me.
    Best regards,
    Carlos
    Attachments:
    Toshiba_problem02.jpg ‏62 KB
    Toshiba_problem03.jpg ‏65 KB
    Toshiba_problem04.jpg ‏147 KB
    Toshiba_problem04.jpg ‏147 KB

    Tecra A11 (PTSE3U-05Q01P)
    Has essentially the same spec as this model: Tecra A11-S3540 (PTSE3U-00R00G)
    Downloads here. 
    My guess is that you are missing one of these - maybe both.
       TPM Driver for Windows XP
       Infineon TPM Software Professional Package for Windows XP/Vista/7 (32/64)
    Isn't it time to upgrade to Windows 7?
    -Jerry

  • [W510] Missing driver for SCSIADAPTER

    Hi!
    My Thinvatage Tool is warning me of a missing decive driver. The Device is called "ADZBKF8F IDE Controller".
    Looking into the device details I found out the it is an SCSI Adapter. I could not find a driver for this, nor could windows do. Wehre can I get the driver for this?
    Further Info:
    W510 4389-W1B
    Original Windows 7 Installation

    Try reinstalling Daemon Tools?

  • Win 8.1 driver for my MX870 printer

    Just got a new Dell with Windows 8.1. When I plugged in my MX870, Windows installed a driver. The driver for printing seems similar to the Canon original driver I got 2-3 years ago and installed on my old Dell running Vista.
    But, I don't see a Canon driver for scanning with the MX870. I do see the lame Windows Fax and Scanner applet, but that really is lame.
    I see that the Canon web page has a Windows 8 driver for the printer. So, always cautious about installing anything- I presume I should uninstall the driver that Windows 8.1 installed, then install the driver on the Canon web site?
    If so, should I install the driver with the printer NOT connected to the computer?
    thanks,
    Joe
    Solved!
    Go to Solution.

    Hi JoeZ,
    You don't have to uninstall the drivers that were already installed by Windows; you can just download and install the latest drivers for the printer from the Canon USA website.  Please click here to go to the Drivers and Software page for the PIXMA MX870.  Once on the initial download page for your model, please do the following:
    1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
    2. Next, please click on the red arrow next to the "RECOMMENDED FOR YOU" section and click the MP drivers file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
    Once you have downloaded the MP drivers file, please follow the steps above to also download the rest of the software for the printer, except in Step 2 you will want to click on the red arrow next to the word SOFTWARE to display and download the software.
    Hope this helps!
    This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Win XP 64 driver for hp laserjet pro 200 color mfp m276nw

    Hi, any workaround for using this printer under XP-64?
    Maybe driver rename or compatible generic?
    Just bought it, unpacked, connected - and found out that XP 64 is not supported.
    Now what? Return in disgust and buy Cannon or Minolta again, as they support all OS?

    Hello sangamon,
    Welcome to the HP Forums!
    I understand you're looking for a Laserjet 200 color MFP m276nw driver for Windows XP 64 bit. I will do my best to assist you! Have you tried downloading the full feature from the HP website here? This will support your operating system. Please let me know if you have any further questions.
    Have a great night!
    I worked on behalf of HP.

  • Re: Satellite L70-A-13E and Win 8: Twain driver for built-in webcam required

    Hi,
    My application require TWAIN DRIVER for Web Camera of Satellite L70-A-13E on Windows 8.1.
    Would you please tell me how can I get it?
    regards
    Nevzat

    The TWAIN driver is a software.
    For example you want to take a picture from built-in web camera by using your application.
    Your application accesses to web camera via twain driver.
    Just like printer driver. With printer driver you can send your documents to printer via printer driver.
    With the TWAIN driver you can access to WEB CAM and capture the picture and save the picture image
    yo your application.
    Almost all of the external web cameras have TWAIN drivers. Twain driver is become defacto.
    I asked the TWAIN driver here because my note book has built-in web camera.
    I may access to built-in web camera via TWAIN drivers. Is the any way you know?
    I have been using these TWAIN drivers over 20 years in my application.
    For getting picture from camera or from scanner.
    Best regards
    Nevzat

  • Missing driver for Z230 WorkStatio​n?

    Hi,
    Now its on again...
    Does anyone know the correct driver for:
    PCI\VEN_8086&DEV_153A&SUBSYS_1905103C&REV_05\3&115​83659&0&C8
    Hope you are able to help!
    Thanks,
    Allan

    Hi:
    See if this driver works...first or second file depending on bit version.
    https://downloadcenter.intel.com/download/23071/Ne​twork-Adapter-Driver-for-Windows-8-1-

  • Missing Driver For Video Controller

    my laptop's model no. is toshiba satellite pro l510. I have windows 7 installed in my laptop . my videos on my laptop was working fine till yesterday but sudeenly my vlc crashed and other video players were also crashing so i tried to update the display driver but couldn't so i unistalled it . But now i'm trying to reinstall it but the driver is not installing . also in the device manager i am unable to find the display adapter icon. and i'm getting a yellow colour icon in my other devices option in the device manager saying video controller (vga compatible)when i'm double clicking it , it says "The drivers for this device are not installed. (Code 28)Data error (cyclic redundancy check).
    To find a driver for this device, click Update Driver" i'm not able to find the right drivers for my laptop . alll the drivers i've downloaded are not installing or hasn't heldped. plzz help..

    The CRC mismatch error means a system file or a registry entry doesnt match what windows or the driver is expecting. In some cases a simple chkdsk or a registry cleaner will solve the problem and in some cases a full restore is needed. Click the start button.Right click my computer.Select Properties -> Tools -> Check Now -> Start -> Schedule Disk Check -> Next Boot -> Restart PC I would also advise running a registry cleaner like ccleaner to check for errors.http://www.piriform.com/ccleaner Regsitry Tab -> Scan For Issues -> Wait until done -> Fix Selected Issues. While you are in there you should go ahead and run the regular cleaner to, but thats up to you.Cleaner -> Run Cleaner

  • Missing Driver for Epson PictureMate 500

    Can someone help me? I've recently crossed over from Windows and while delighted I made the move I still can't print my photos. I've gone onto the EPSON website, downloaded the correct installer (epson11775.dmg) and run it. But when I then connect the printer and run iPhoto it can't find the correct printer driver. I'm looking under EPSON, Epson PM... but "Epson PM 500" isn't there? What am I doing wrong - where can I locate the driver that the installation software installed?

    Hi Jamie
    It's not often you even need to install a driver for Mac.
    Normal procedure is, physically connect the printer to the USB port, switch it on.
    Open Printer Setup Utility (found in Applications/Utilities), click Add
    You are then shown the Printer already selected, and the driver for it that came with the Mac is automatically loaded. Press OK and you're done.
    That's what I would have done first. However to again install the driver, which would be updating the existing one, one just double clicks on the epson28087eu.sit package, which will open and run an installer which will install the driver files to their correct locations. You don't have to manually place them anywhere.
    So the question is, can Printer Setup Utility see your printer when you click Add? If not you may have to select from there, in one of the dialogue boxes and select 'USB'.
    regards roam

  • Missing driver for usb port

    I received an alert to update my ipod software today which i accepted and i now no longer have a driver for my usb port

    SAME THING HAPPENED TO ME AND ALL BECUASE I WAS HELPING MY HUSBAND WITH HIS NEWER VERSION OF THE NANO THAT HE GOT FOR CHRISTMAS, NOW I CANT USE MINE!!!

  • Satellite U840-113: Missing driver for PCI-Communications controller

    *Toshiba Satellite U840-113 - PSU4SE:* Win7-Prof-64Bit with original MS-DVD on new SSD completly new installed, RAID disabled, no RAID-Driver oder RAID-Software installed, internal SSD now as normal SSD in use, all drivers successfull installed - except for the following device: in the Device Manager I find under the "Another Devices" the position *"? PCI-Communications controller (single)".*
    Who can help me to locate / find the correct driver for this "PCI-Communications controller" ???
    What ist this? Do I need this?
    The System seems to run perfectly; shall I disable this Device?
    Many thanks for helpful answers!!!

    Hi
    Maybe this Toshiba article could be helpful:
    http://www.mytoshiba.com.au/support/items/faq/222
    The PCI Simple Communications Controller is part of Intel AMT Management Engine Interface and is related to networking on your computer.
    You will need to install the Intel(R) AMT Management Engine Interface driver.

  • Touchsmart 600 - 1220SC - no win 8 x64 driver for Touch screen

    I cant get my Touchsmart 600 - 1220SC working with Win 8 enterprise X64.
    The pc is up and running but it cant find any drivers for the touchscreen.
    I have tried to remove the device and made a reboot - no difference.
    Win 8 is activated but still no drivers in windows update - not even as an optional download.
    Anybody know where to find the driver ?
    Regards 
    Peter

    Have you tried enabling all "Optional, Recommended, and Important updates" in Windows Update??? Activate Windows 8, reboot, enable all updates in Windows Update, and see if one exists.
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Missing driver for co-processor of my hp pavillion dv6000

    Hello Mr DavidPK. I saw a similar problem dat i am having with my 3 missing device drivers : 2 base system device and 1 co-processor. but my problem now is with my co-processor driver. Here is my P#: KN050EA#ABU. This problem started when i upgraded from vista to win 7 ultimate

    Nvidia Chipset:
    http://ftp.hp.com/pub/softpaq/sp37501-38000/sp37730.exe
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

Maybe you are looking for