Win 7 System Health Report Does Not Detect Installed Antivirus Applicatio​n

Hello all,
To test your PC for this problem go to: Control Panel > Performance Information and Tools > Click on the Advanced tools link (top left menu) and then click on the Generate a system report link (at the bottom of the page). Now, about 60 seconds later, your report should be completed and you should be able to see if your antivirus was detected (or not).
In my case, it was not detected (as is the case for many other Win 7 users), so if that bugs you and you want it fixed, please follow this link to obtain a temporary patch from Microsoft:   http://support.microsoft.com/kb/2482947
Please note the Microsoft cautions and recommendations before downloading and installing.
Good luck!
Solved!
Go to Solution.

Hope the above solution helps others who are experiencing the same isssue.

Similar Messages

  • System - services - reporting does not execute ABAP Reporting

    Hi All,
    system -> services -> reporting does not execute ABAP Reporting.
    we are able to execute sa38 by running t-code.
    Please help.
    Thanks
    Harshit

    Check authorizations (SU53).

  • Windows 7 does not detect & install HP Colorlaser 2600n printer connected to wireless network

    I have an HP Colorlaser 2600n printer connected to a router set up for my wireless network. I have tried to installed the printer through the wireless network, as I have done with other computers, but my new HP dv7 laptop does not find the printer in the network. Just to check, I installed the printer directly to the laptop through an usb connection and it work, but nothing I have tried has work to access the printer through the wireless network. If I use HP installation CD and check network installation, the setup program does find the printer, but once I finished, the printer does not appear in "printer and devices". Any suggestion on how to solve this situation? Thank you in advance for your help!!

    Download and run this: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-92​6&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju​...
    Your security system's firewall is likely in the way.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Can't install Win 8 - Satellite Pro C660 does not detect HDD

    Hello,
    My HDD has died, so i decided to upgrade my Satellite Pro C660-1D9 to an SSD.
    I made a bootable USB with Win8, and booted just fine.
    The problem is that it does not detect my SSD so i can proceed with the install.
    SSD shows up in BIOS, but not in Windows install.
    It says there's a driver missing.
    I downloaded AHCI drivers (XP, only ones available) and even then, after selecting the only driver that appears, it says no new devices found.
    I tried changing SATA mode from AHCI to Compatibility mode and it's the same..
    What can i do?
    Thanks for the help.
    Best regards,
    Bruno Moreira

    Older Windows XP required an AHCI driver from Intel but I think this isnt a missing SATA driver issue because as far as I know Windows 8 as well as Win 8.1 already contains the drivers in order to recognize the HDD or SSD drive.
    Furthermore the OS installation should be possible even if the driver would not be added... for this procedure you have to use the "compatibility mode".
    As you said, the compatibility mode did not work too, so I think there is another problem.
    However, Toshiba driver page provides also an Intel RST (Intel Rapid Storage Technology) driver (Windows 8 - Upgrade) which you could try to add while OS installation.
    But Im wondering if you would be able to install this Win 8 on common SATA HDD.
    Did you try to format the SSD drive using another computer and then to install Win 8?
    Try it out.

  • Tecra Z50-A-11V: New SSD but Win 8.1 does not detect it

    We bought a Crucial M550 256GB disk and want to replace in a Toshiba Tecra Z50-Av1
    We do not want to make any transfer of data or cloned.
    We want to do a clean install with Windows 8.1
    The BIOS recognizes the SSD
    But when you install Windows 8.1 does not detect any disk connected to the unit and requested additional drivers. Windows not detect drive
    https://www.dropbox.com/s/mlvk6v3lxzi1rrh/2014-05-04%2009.47.18.jpg
    https://www.dropbox.com/s/fr2eo5l9xonaoln/2014-05-04%2009.48.59.jpg
    https://www.dropbox.com/s/8usxog8wm06funr/2014-05-04%2010.06.09.jpg
    i too test with lasted version of this driver (old F6 in boot to locate hdd driver)
    https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23496&lang=eng&wapk w=f6flpy-x64.zip
    and with toshiba package
    http://support.toshiba.com/support/viewContentDetail?contentId=4004211
    you can see than i have 3.20 version of BIOS. interestingly I see that the last one is the Toshiba has released version 3.1
    But always the drive CRUCIAL is not reconized by the boot instalation of windows
    The problem is similar with ubunto, kubuntu, .... the drive is detected with the BIOS but not for the OS.
    any help?
    Thanks

    Hi
    Did you solve this issue?
    Could you install the Windows 8.1 system on this SSD drive?
    I think the additional driver installation while setup procedure isnt necessary since Win 8.1 should already contain the essential drivers.
    From my point of few there could be an compatibility issue (maybe SSD firmware update would solve this).
    How about the usage of other SSD drives? Do you have the same problem using other SSD drives from other manufactures?
    Feedback would be appreciated.

  • System (AGE3) 'Customer Aging Report' does not print BP Ref. No.

    Hi Experts!
    I have a question about the PLD for the Customer Aging Report (AGE3 = Collection Report). This system print layout does not print the BP Ref. No. in that field.
    And when I went into the PLD, that field (and the other repetitive fields) are text fields. How do I get the BP Ref. No. to print in the field?
    Any help would be greatly appreciated.
    Marli

    Hi Marli,
    If the PLD is of System report , then you have to heck that in ocrd table what is the field name of BP ref no. and try to convert that text field into database field and give the ref of ocrd BP ref no.
    However the chnces of working fine for the above sol. is very low  as we will not prefer to change the system report.
    You should go for QLD or Crystal report  for that .
    Rgds,
    Premraj

  • After installing Mountain Lion, why screen server does not detect photos from iPhoto?

    After installing Mountain Lion, why the screen server does not detect photos from iPhoto?

    I had the same problem and found the solution here:
    https://discussions.apple.com/thread/3189272

  • My pc has win the operating system view, which does not support lightroom 5. I want to buy version 4

    My pc has win the operating system view, which does not support lightroom 5. I want to buy version 4?

    Thank you, Jim, for your prompt reply. Amazon has it for $151.99, Ebay has a few copies that end up being about as expensive after international shipping and other fees, and I don't trust most of the other sites after reading reviews on them. Looks like I'm going to have to fork out some dollars. How unfortunate.
    Thanks again,
    Michelle

  • Win XP does not detect onboard ethernet card

    Hi,
    i have bought a used T41 (2373-tg5) and installed XP Pro SP3.
    I have installed all the drivers and everything is working fine. The only problem i have, is the fact, that XP does not detect my onboard 10/100/1000 Ethernet LAN card. It does not show up in the device manager and manually searching for new hardware is to no use.
    I have also looked at the BIOS config, the onboard ethernet card is listed as being "enabled". I am sure, there was a device marked with a yellow exclamation mark in the device manager named "ethernet adapter" once. I am not sure, wether this was the WLAN card, i have successfully installed a driver for...it is completely gone now though... 
    Is this some weird XP thing? I thought, i had read something like this once, but cannot remember.

    cnhoff, wilkommen im Forum,
    when you enter BIOS the MAC address of the internal LAN card should be shown at the bottom, is it showing a number or is it all zeros? All zeros means that there is no LAN installed which would mean in your case a new mainboard or using a pcmcia LAN card.
    Grüße
    edit: Typo
    Message Edited by andyP on 08-13-2008 07:10 PM
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Report does not come up when called from Forms

    I have installed Oracle 9i database and dveloper suit on my pc. When I run reports from forms, the report does not come up. I have Adobe Acrobat reader 6. The report does get created, I can see it in the cache directory.
    It created an error file, I am posting the begining of this file here.
    Please help.
    Thanking you in advance.
    An unexpected exception has been detected in native code outside the VM.
    Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0x65553878
    Function name=Java_oracle_reports_engine_EngineImpl_CGetEnv
    Library=C:\orahome1\bin\rw90.dll
    Current Java thread:
         at oracle.reports.engine.EngineImpl.CGetEnv(Native Method)
         at oracle.reports.engine.EngineImpl.getEnvs(EngineImpl.java:453)
         at oracle.reports.engine.EngineClassPOATie.getEnvs(EngineClassPOATie.java:152)
         at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:205)
         at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:62)
         at com.inprise.vbroker.poa.POAImpl.invoke(POAImpl.java:2355)
         at com.inprise.vbroker.poa.ActivationRecord.invoke(ActivationRecord.java:104)
         at com.inprise.vbroker.GIOP.GiopProtocolAdapter.doRequest(GiopProtocolAdapter.java:492)
         at com.inprise.vbroker.IIOP.ServerProtocolAdapter.doRequest(ServerProtocolAdapter.java:64)
         at com.inprise.vbroker.GIOP.GiopProtocolAdapter.dispatchMessage(GiopProtocolAdapter.java:653)
         at com.inprise.vbroker.orb.TPDispatcherImpl$TPDispatcher.run(TPDispatcherImpl.java:99)
         at com.inprise.vbroker.orb.ThreadPool$PoolWorker.run(ThreadPool.java:76)

    Hi ,
    Looks like this is not a Forms side problem or even a Reports Servlet problem
    Some guesses.
    From the exception
    at oracle.reports.engine.EngineImpl.CGetEnv(Native Method)
    at oracle.reports.engine.EngineImpl.getEnvs(EngineImpl.java:453)
    it looks like engine crashing. Did you see the server GUI up and running ? Server might not have started
    Give
    rwserver server=<server_name> in command line.
    The server GUI should come up and show "ready "
    You have multiple Oracle Homes on the same machine. So this could be a PATH problem.
    1) Go to ControlPanel -> System - Advanced - Env variables - System Variables
    Copy the IDS specific PATH to clipboard
    Go to iDS_HOME\bin\ and open a command window. Set only the above PATH here. Start a standalone server
    rwserver server=<server_name>
    and try
    (If this works you could write a batch file later)
    2) For trouble shooting purposes use a different server name to start the standalone server.
    3) Also look in your registry
    HKLM\Software\Oracle\Home<x>\
    Here please see whether you have any "very long" environment variable (say more than 256 chars or 512 chars).
    This is just a guess.
    4) To confirm this is not a Reports servlet problem
    give
    rwclient report=<report_name> + ..... <server=server_name>
    If you get same error, then it is not a servlet problem. It could be that Reports server is crashing
    Thanks
    Ratheesh
    [    All Docs     ]
    http://otn.oracle.com/documentation/reports.html
    [     Publishing reports to web  - 10G  ]
    http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
    http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
    [   Building reports  - 10G ]
    http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
    http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
    [   Forms Reports Integration whitepaper  9i ]
    http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf

  • Arch does not detect /dev/sdb

    HI everybody,
    Like the title says, Arch does not detect a second SATA hard drive I have installed on my computer.
    I've searched around Google and the forums and I've doesn't found any helpfull tip.
    The Arch installation is fresh, I just made it tonight, and cfdisk (during the installation) had recogniced the drive.
    I've posted this here because I'm new on Arch, coming from Ubuntu and Fedora distros and I feel like a real Newbie
    Here's some outputs that may be useful:
    sudo fdisk -l
    Disk /dev/sda: 1000.2 GB, 1000204886016 bytes, 1953525168 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Identificador del disco: 0x8370a3d6
    Disposit. Inicio Comienzo Fin Bloques Id Sistema
    /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT
    /dev/sda2 206848 1435379711 717586432 7 HPFS/NTFS/exFAT
    /dev/sda3 1435379712 1953525167 259072728 5 Extendida
    /dev/sda5 1435379775 1437339641 979933+ 82 Linux swap / Solaris
    /dev/sda6 * 1437339705 1827960116 195310206 83 Linux
    /dev/sda7 1827960180 1953525167 62782494 83 Linux
    ls -lat /dev/sd*
    brw-rw---- 1 root disk 8, 2 feb 3 03:32 /dev/sda2
    brw-rw---- 1 root disk 8, 7 feb 3 03:32 /dev/sda7
    brw-rw---- 1 root disk 8, 5 feb 3 03:32 /dev/sda5
    brw-rw---- 1 root disk 8, 6 feb 3 03:32 /dev/sda6
    brw-rw---- 1 root disk 8, 1 feb 3 03:32 /dev/sda1
    brw-rw---- 1 root disk 8, 3 feb 3 03:32 /dev/sda3
    brw-rw---- 1 root disk 8, 0 feb 3 03:32 /dev/sda
    lspci -k
    00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
    Subsystem: Intel Corporation Device 0036
    00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02)
    Kernel driver in use: pcieport
    00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
    Subsystem: Intel Corporation Device 0036
    Kernel driver in use: mei
    00:16.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset PT IDER Controller (rev 06)
    Subsystem: Intel Corporation Device 0036
    Kernel driver in use: ata_generic
    00:16.3 Serial controller: Intel Corporation 5 Series/3400 Series Chipset KT Controller (rev 06)
    Subsystem: Intel Corporation Device 0036
    Kernel driver in use: serial
    00:19.0 Ethernet controller: Intel Corporation 82578DC Gigabit Network Connection (rev 06)
    Subsystem: Intel Corporation Device 0037
    Kernel driver in use: e1000e
    00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
    Subsystem: Intel Corporation Device 0036
    Kernel driver in use: ehci_hcd
    00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
    Subsystem: Intel Corporation Device 0036
    Kernel driver in use: snd_hda_intel
    00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
    Subsystem: Intel Corporation Device 0036
    Kernel driver in use: ehci_hcd
    00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6)
    00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06)
    Subsystem: Intel Corporation Device 0036
    Kernel driver in use: lpc_ich
    00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller (rev 06)
    Subsystem: Intel Corporation Device 0036
    Kernel driver in use: pata_acpi
    00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
    Subsystem: Intel Corporation Device 0036
    Kernel driver in use: i801_smbus
    00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller (rev 06)
    Subsystem: Intel Corporation Device 0036
    Kernel driver in use: pata_acpi
    01:00.0 VGA compatible controller: NVIDIA Corporation GF114 [GeForce GTX 560 Ti] (rev a1)
    Subsystem: Device 196e:0898
    Kernel driver in use: nvidia
    01:00.1 Audio device: NVIDIA Corporation GF114 HDMI Audio Controller (rev a1)
    Subsystem: Device 196e:0898
    Kernel driver in use: snd_hda_intel
    3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
    Subsystem: Intel Corporation Device 8086
    3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
    Subsystem: Intel Corporation Device 8086
    3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
    Subsystem: Intel Corporation Device 8086
    3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
    Subsystem: Intel Corporation Device 8086
    3f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
    Subsystem: Intel Corporation Device 8086
    3f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
    Subsystem: Intel Corporation Device 8086
    Thanks for the help!

    I had the drive connected to a eSATA port, but I pluged it to a ordinary SATA port, and the result is the same.
    The configuration on the BIOS:
    ATA/IDE Mode -> Native
    Configure Storage as -> IDE
    It doesn't show more valuable information except for the location of any drive on any SATA port.
    dmesg output, it can be useful for someone:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.7.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Jan 28 10:03:32 CET 2013
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d40a9225-bd6b-46b0-9e14-54b177499391 ro quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009c000-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000df451fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000df452000-0x00000000df494fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000df495000-0x00000000df508fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000df509000-0x00000000df50afff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000df50b000-0x00000000df610fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000df611000-0x00000000df611fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000df612000-0x00000000df612fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000df613000-0x00000000df61afff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000df61b000-0x00000000df61bfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000df61c000-0x00000000df61dfff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000df61e000-0x00000000df625fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000df626000-0x00000000df646fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000df647000-0x00000000df689fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000df68a000-0x00000000df7fffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000021bffffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.6 present.
    [ 0.000000] DMI: /DH55HC, BIOS TCIBX10H.86A.0048.2011.1206.1342 12/06/2011
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x21c000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask E00000000 write-back
    [ 0.000000] 1 base 200000000 mask FE0000000 write-back
    [ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
    [ 0.000000] 3 base 1FC000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 21C000000 mask FFC000000 uncachable
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: update [mem 0x1fc000000-0x1ffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fccd0-0x000fccdf] mapped at [ffff8800000fccd0]
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
    [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0xdf7fffff]
    [ 0.000000] [mem 0x00000000-0xdf7fffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0xdf7fffff @ [mem 0x1fffb000-0x1fffffff]
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1fbffffff]
    [ 0.000000] [mem 0x100000000-0x1fbffffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0x1fbffffff @ [mem 0xdf7fb000-0xdf7fffff]
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
    [ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0x21bffffff @ [mem 0x1fbffe000-0x1fbffffff]
    [ 0.000000] RAMDISK: [mem 0x37a76000-0x37d32fff]
    [ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 INTEL)
    [ 0.000000] ACPI: XSDT 00000000df61ce18 00054 (v01 INTEL DH55HC 01072009 MSFT 00010013)
    [ 0.000000] ACPI: FACP 00000000df61ad98 000F4 (v04 INTEL DH55HC 01072009 MSFT 00010013)
    [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20120913/tbfadt-394)
    [ 0.000000] ACPI BIOS Bug: Warning: 32/64X FACS address mismatch in FADT - 0xDF61BF40/0x00000000DF61BE40, using 32 (20120913/tbfadt-521)
    [ 0.000000] ACPI: DSDT 00000000df613018 06B90 (v01 INTEL DH55HC 00000000 INTL 20051117)
    [ 0.000000] ACPI: FACS 00000000df61bf40 00040
    [ 0.000000] ACPI: APIC 00000000df61af18 000CC (v02 INTEL DH55HC 01072009 MSFT 00010013)
    [ 0.000000] ACPI: SSDT 00000000df61ac18 00102 (v01 INTEL DH55HC 00000001 MSFT 03000001)
    [ 0.000000] ACPI: MCFG 00000000df61df18 0003C (v01 INTEL DH55HC 01072009 MSFT 00000097)
    [ 0.000000] ACPI: HPET 00000000df61de98 00038 (v01 INTEL DH55HC 01072009 AMI. 00000003)
    [ 0.000000] ACPI: ASF! 00000000df61cc18 000A0 (v32 INTEL DH55HC 00000001 TFSM 000F4240)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021bffffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21bffffff]
    [ 0.000000] NODE_DATA [mem 0x21bffc000-0x21bffffff]
    [ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880213600000-ffff88021b5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x21bffffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009bfff]
    [ 0.000000] node 0: [mem 0x00100000-0xdf451fff]
    [ 0.000000] node 0: [mem 0xdf509000-0xdf50afff]
    [ 0.000000] node 0: [mem 0xdf611000-0xdf611fff]
    [ 0.000000] node 0: [mem 0xdf68a000-0xdf7fffff]
    [ 0.000000] node 0: [mem 0x100000000-0x1fbffffff]
    [ 0.000000] node 0: [mem 0x200000000-0x21bffffff]
    [ 0.000000] On node 0 totalpages: 2061655
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 6 pages reserved
    [ 0.000000] DMA zone: 3910 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 894475 pages, LIFO batch:31
    [ 0.000000] Normal zone: 18176 pages used for memmap
    [ 0.000000] Normal zone: 1128704 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 16 CPUs, 12 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000df452000 - 00000000df495000
    [ 0.000000] PM: Registered nosave memory: 00000000df495000 - 00000000df509000
    [ 0.000000] PM: Registered nosave memory: 00000000df50b000 - 00000000df611000
    [ 0.000000] PM: Registered nosave memory: 00000000df612000 - 00000000df613000
    [ 0.000000] PM: Registered nosave memory: 00000000df613000 - 00000000df61b000
    [ 0.000000] PM: Registered nosave memory: 00000000df61b000 - 00000000df61c000
    [ 0.000000] PM: Registered nosave memory: 00000000df61c000 - 00000000df61e000
    [ 0.000000] PM: Registered nosave memory: 00000000df61e000 - 00000000df626000
    [ 0.000000] PM: Registered nosave memory: 00000000df626000 - 00000000df647000
    [ 0.000000] PM: Registered nosave memory: 00000000df647000 - 00000000df68a000
    [ 0.000000] PM: Registered nosave memory: 00000000df800000 - 00000000e0000000
    [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e4000000
    [ 0.000000] PM: Registered nosave memory: 00000000e4000000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
    [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
    [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
    [ 0.000000] PM: Registered nosave memory: 00000001fc000000 - 0000000200000000
    [ 0.000000] e820: [mem 0xe4000000-0xfed1bfff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021bc00000 s84608 r8192 d21888 u131072
    [ 0.000000] pcpu-alloc: s84608 r8192 d21888 u131072 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2027089
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d40a9225-bd6b-46b0-9e14-54b177499391 ro quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 8033416k/8847360k available (4883k kernel code, 600740k absent, 213204k reserved, 4030k data, 812k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=16.
    [ 0.000000] NR_IRQS:4352 nr_irqs:808 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 3324.877 MHz processor
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6652.82 BogoMIPS (lpj=11082923)
    [ 0.000006] pid_max: default: 32768 minimum: 301
    [ 0.000034] Security Framework initialized
    [ 0.000044] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000483] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.002616] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.003590] Mount-cache hash table entries: 256
    [ 0.003783] Initializing cgroup subsys cpuacct
    [ 0.003786] Initializing cgroup subsys memory
    [ 0.003793] Initializing cgroup subsys devices
    [ 0.003794] Initializing cgroup subsys freezer
    [ 0.003796] Initializing cgroup subsys net_cls
    [ 0.003797] Initializing cgroup subsys blkio
    [ 0.003818] CPU: Physical Processor ID: 0
    [ 0.003819] CPU: Processor Core ID: 0
    [ 0.003824] mce: CPU supports 9 MCE banks
    [ 0.003833] CPU0: Thermal monitoring enabled (TM1)
    [ 0.003840] process: using mwait in idle threads
    [ 0.003844] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift: 6
    [ 0.003958] Freeing SMP alternatives: 16k freed
    [ 0.004816] ACPI: Core revision 20120913
    [ 0.007720] ftrace: allocating 18793 entries in 74 pages
    [ 0.015109] Switched APIC routing to physical flat.
    [ 0.015602] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.048500] smpboot: CPU0: Intel(R) Core(TM) i5 CPU 660 @ 3.33GHz (fam: 06, model: 25, stepping: 05)
    [ 0.154172] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
    [ 0.154177] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
    [ 0.154178] ... version: 3
    [ 0.154179] ... bit width: 48
    [ 0.154180] ... generic registers: 4
    [ 0.154181] ... value mask: 0000ffffffffffff
    [ 0.154182] ... max period: 000000007fffffff
    [ 0.154182] ... fixed-purpose events: 3
    [ 0.154183] ... event mask: 000000070000000f
    [ 0.190806] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.177468] smpboot: Booting Node 0, Processors #1 #2 #3
    [ 0.227213] Brought up 4 CPUs
    [ 0.227218] smpboot: Total of 4 processors activated (26609.30 BogoMIPS)
    [ 0.229378] devtmpfs: initialized
    [ 0.230458] PM: Registering ACPI NVS region [mem 0xdf452000-0xdf494fff] (274432 bytes)
    [ 0.230462] PM: Registering ACPI NVS region [mem 0xdf612000-0xdf612fff] (4096 bytes)
    [ 0.230463] PM: Registering ACPI NVS region [mem 0xdf61b000-0xdf61bfff] (4096 bytes)
    [ 0.230464] PM: Registering ACPI NVS region [mem 0xdf61e000-0xdf625fff] (32768 bytes)
    [ 0.230466] PM: Registering ACPI NVS region [mem 0xdf647000-0xdf689fff] (274432 bytes)
    [ 0.231092] RTC time: 21:05:23, date: 02/03/13
    [ 0.231127] NET: Registered protocol family 16
    [ 0.231227] ACPI: bus type pci registered
    [ 0.231289] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
    [ 0.231291] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
    [ 0.236542] PCI: Using configuration type 1 for base access
    [ 0.236958] bio: create slab <bio-0> at 0
    [ 0.237003] ACPI: Added _OSI(Module Device)
    [ 0.237005] ACPI: Added _OSI(Processor Device)
    [ 0.237006] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.237007] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.237812] ACPI: EC: Look up EC in DSDT
    [ 0.238684] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.240605] ACPI: SSDT 00000000df612c18 0038C (v01 AMI IST 00000001 MSFT 03000001)
    [ 0.240820] ACPI: Dynamic OEM Table Load:
    [ 0.240821] ACPI: SSDT (null) 0038C (v01 AMI IST 00000001 MSFT 03000001)
    [ 0.240837] ACPI BIOS Bug: Warning: Incorrect checksum in table [SSDT] - 0x3F, should be 0x1F (20120913/tbutils-324)
    [ 0.240840] ACPI: SSDT 00000000df61bd18 00084 (v01 AMI CST 00000001 MSFT 03000001)
    [ 0.241020] ACPI: Dynamic OEM Table Load:
    [ 0.241021] ACPI: SSDT (null) 00084 (v01 AMI CST 00000001 MSFT 03000001)
    [ 0.241360] ACPI: Interpreter enabled
    [ 0.241363] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.241374] ACPI: Using IOAPIC for interrupt routing
    [ 0.241528] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.244856] ACPI: No dock devices found.
    [ 0.244859] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.244939] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.244985] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
    [ 0.245005] PCI host bridge to bus 0000:00
    [ 0.245007] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.245009] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.245010] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.245011] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.245012] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
    [ 0.245019] pci 0000:00:00.0: [8086:0040] type 00 class 0x060000
    [ 0.245033] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
    [ 0.245049] pci 0000:00:01.0: [8086:0041] type 01 class 0x060400
    [ 0.245073] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.245118] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
    [ 0.245149] pci 0000:00:16.0: reg 10: [mem 0xfa129000-0xfa12900f 64bit]
    [ 0.245261] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.245285] pci 0000:00:16.2: [8086:3b66] type 00 class 0x010185
    [ 0.245304] pci 0000:00:16.2: reg 10: [io 0xf150-0xf157]
    [ 0.245314] pci 0000:00:16.2: reg 14: [io 0xf140-0xf143]
    [ 0.245323] pci 0000:00:16.2: reg 18: [io 0xf130-0xf137]
    [ 0.245334] pci 0000:00:16.2: reg 1c: [io 0xf120-0xf123]
    [ 0.245346] pci 0000:00:16.2: reg 20: [io 0xf110-0xf11f]
    [ 0.245430] pci 0000:00:16.3: [8086:3b67] type 00 class 0x070002
    [ 0.245452] pci 0000:00:16.3: reg 10: [io 0xf100-0xf107]
    [ 0.245463] pci 0000:00:16.3: reg 14: [mem 0xfa128000-0xfa128fff]
    [ 0.245580] pci 0000:00:19.0: [8086:10f0] type 00 class 0x020000
    [ 0.245601] pci 0000:00:19.0: reg 10: [mem 0xfa100000-0xfa11ffff]
    [ 0.245610] pci 0000:00:19.0: reg 14: [mem 0xfa127000-0xfa127fff]
    [ 0.245620] pci 0000:00:19.0: reg 18: [io 0xf020-0xf03f]
    [ 0.245697] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    [ 0.245723] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
    [ 0.245745] pci 0000:00:1a.0: reg 10: [mem 0xfa126000-0xfa1263ff]
    [ 0.245840] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.245870] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
    [ 0.245887] pci 0000:00:1b.0: reg 10: [mem 0xfa120000-0xfa123fff 64bit]
    [ 0.245970] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.246001] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
    [ 0.246022] pci 0000:00:1d.0: reg 10: [mem 0xfa125000-0xfa1253ff]
    [ 0.246117] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.246141] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
    [ 0.246216] pci 0000:00:1f.0: [8086:3b06] type 00 class 0x060100
    [ 0.246328] pci 0000:00:1f.2: [8086:3b20] type 00 class 0x01018f
    [ 0.246347] pci 0000:00:1f.2: reg 10: [io 0xf0f0-0xf0f7]
    [ 0.246357] pci 0000:00:1f.2: reg 14: [io 0xf0e0-0xf0e3]
    [ 0.246366] pci 0000:00:1f.2: reg 18: [io 0xf0d0-0xf0d7]
    [ 0.246376] pci 0000:00:1f.2: reg 1c: [io 0xf0c0-0xf0c3]
    [ 0.246386] pci 0000:00:1f.2: reg 20: [io 0xf0b0-0xf0bf]
    [ 0.246395] pci 0000:00:1f.2: reg 24: [io 0xf0a0-0xf0af]
    [ 0.246454] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
    [ 0.246472] pci 0000:00:1f.3: reg 10: [mem 0xfa124000-0xfa1240ff 64bit]
    [ 0.246498] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
    [ 0.246538] pci 0000:00:1f.5: [8086:3b26] type 00 class 0x010185
    [ 0.246557] pci 0000:00:1f.5: reg 10: [io 0xf090-0xf097]
    [ 0.246567] pci 0000:00:1f.5: reg 14: [io 0xf080-0xf083]
    [ 0.246576] pci 0000:00:1f.5: reg 18: [io 0xf070-0xf077]
    [ 0.246586] pci 0000:00:1f.5: reg 1c: [io 0xf060-0xf063]
    [ 0.246595] pci 0000:00:1f.5: reg 20: [io 0xf050-0xf05f]
    [ 0.246605] pci 0000:00:1f.5: reg 24: [io 0xf040-0xf04f]
    [ 0.246682] pci 0000:01:00.0: [10de:1200] type 00 class 0x030000
    [ 0.246690] pci 0000:01:00.0: reg 10: [mem 0xf8000000-0xf9ffffff]
    [ 0.246698] pci 0000:01:00.0: reg 14: [mem 0xe8000000-0xefffffff 64bit pref]
    [ 0.246706] pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf3ffffff 64bit pref]
    [ 0.246711] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
    [ 0.246717] pci 0000:01:00.0: reg 30: [mem 0xfa000000-0xfa07ffff pref]
    [ 0.246758] pci 0000:01:00.1: [10de:0e0c] type 00 class 0x040300
    [ 0.246765] pci 0000:01:00.1: reg 10: [mem 0xfa080000-0xfa083fff]
    [ 0.246835] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.246838] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.246839] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfa0fffff]
    [ 0.246842] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf3ffffff 64bit pref]
    [ 0.246904] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
    [ 0.246915] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.246916] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.246917] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.246919] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
    [ 0.246929] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.247023] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
    [ 0.247107] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.247197] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
    [ 0.247198] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.250341] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    [ 0.250370] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    [ 0.250397] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
    [ 0.250425] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
    [ 0.250454] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    [ 0.250484] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
    [ 0.250511] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    [ 0.250542] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    [ 0.250605] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.250606] vgaarb: loaded
    [ 0.250607] vgaarb: bridge control possible 0000:01:00.0
    [ 0.250627] PCI: Using ACPI for IRQ routing
    [ 0.252814] PCI: Discovered peer bus 3f
    [ 0.252815] PCI: root bus 3f: using default resources
    [ 0.252815] PCI: Probing PCI hardware (bus 3f)
    [ 0.252831] PCI host bridge to bus 0000:3f
    [ 0.252833] pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
    [ 0.252834] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
    [ 0.252836] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
    [ 0.252840] pci 0000:3f:00.0: [8086:2c61] type 00 class 0x060000
    [ 0.252855] pci 0000:3f:00.1: [8086:2d01] type 00 class 0x060000
    [ 0.252869] pci 0000:3f:02.0: [8086:2d10] type 00 class 0x060000
    [ 0.252882] pci 0000:3f:02.1: [8086:2d11] type 00 class 0x060000
    [ 0.252894] pci 0000:3f:02.2: [8086:2d12] type 00 class 0x060000
    [ 0.252906] pci 0000:3f:02.3: [8086:2d13] type 00 class 0x060000
    [ 0.252926] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
    [ 0.253005] PCI: pci_cache_line_size set to 64 bytes
    [ 0.253052] e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff]
    [ 0.253053] e820: reserve RAM buffer [mem 0xdf452000-0xdfffffff]
    [ 0.253055] e820: reserve RAM buffer [mem 0xdf50b000-0xdfffffff]
    [ 0.253056] e820: reserve RAM buffer [mem 0xdf612000-0xdfffffff]
    [ 0.253058] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
    [ 0.253125] NetLabel: Initializing
    [ 0.253126] NetLabel: domain hash size = 128
    [ 0.253127] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.253137] NetLabel: unlabeled traffic allowed by default
    [ 0.253153] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.253157] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.255164] Switching to clocksource hpet
    [ 0.258533] pnp: PnP ACPI init
    [ 0.258548] ACPI: bus type pnp registered
    [ 0.258610] pnp 00:00: [bus 00-ff]
    [ 0.258612] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.258614] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.258615] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.258616] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.258618] pnp 00:00: [mem 0x00000000 window]
    [ 0.258619] pnp 00:00: [mem 0xe0000000-0xffffffff window]
    [ 0.258649] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.258677] pnp 00:01: [mem 0xfed14000-0xfed19fff]
    [ 0.258678] pnp 00:01: [mem 0xe0000000-0xe3ffffff]
    [ 0.258680] pnp 00:01: [mem 0xfed90000-0xfed93fff]
    [ 0.258681] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
    [ 0.258682] pnp 00:01: [mem 0xfee00000-0xfee0ffff]
    [ 0.258714] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
    [ 0.258716] system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
    [ 0.258717] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.258719] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.258720] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
    [ 0.258723] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.258812] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.258814] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.258834] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.258995] pnp 00:03: [io 0x03f8-0x03ff]
    [ 0.259007] pnp 00:03: [irq 4]
    [ 0.259008] pnp 00:03: [dma 0 disabled]
    [ 0.259046] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.259277] pnp 00:04: [io 0x0378-0x037f]
    [ 0.259279] pnp 00:04: [io 0x0778-0x077f]
    [ 0.259283] pnp 00:04: [irq 5]
    [ 0.259284] pnp 00:04: [dma 3]
    [ 0.259381] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
    [ 0.259389] pnp 00:05: [dma 4]
    [ 0.259390] pnp 00:05: [io 0x0000-0x000f]
    [ 0.259391] pnp 00:05: [io 0x0081-0x0083]
    [ 0.259392] pnp 00:05: [io 0x0087]
    [ 0.259394] pnp 00:05: [io 0x0089-0x008b]
    [ 0.259395] pnp 00:05: [io 0x008f]
    [ 0.259396] pnp 00:05: [io 0x00c0-0x00df]
    [ 0.259407] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.259413] pnp 00:06: [io 0x0070-0x0071]
    [ 0.259418] pnp 00:06: [irq 8]
    [ 0.259431] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.259437] pnp 00:07: [io 0x0061]
    [ 0.259449] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.259459] pnp 00:08: [io 0x0010-0x001f]
    [ 0.259460] pnp 00:08: [io 0x0022-0x003f]
    [ 0.259462] pnp 00:08: [io 0x0044-0x005f]
    [ 0.259463] pnp 00:08: [io 0x0062-0x0063]
    [ 0.259464] pnp 00:08: [io 0x0065-0x006f]
    [ 0.259465] pnp 00:08: [io 0x0072-0x007f]
    [ 0.259466] pnp 00:08: [io 0x0080]
    [ 0.259467] pnp 00:08: [io 0x0084-0x0086]
    [ 0.259468] pnp 00:08: [io 0x0088]
    [ 0.259469] pnp 00:08: [io 0x008c-0x008e]
    [ 0.259471] pnp 00:08: [io 0x0090-0x009f]
    [ 0.259472] pnp 00:08: [io 0x00a2-0x00bf]
    [ 0.259473] pnp 00:08: [io 0x00e0-0x00ef]
    [ 0.259474] pnp 00:08: [io 0x04d0-0x04d1]
    [ 0.259500] system 00:08: [io 0x04d0-0x04d1] has been reserved
    [ 0.259503] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.259508] pnp 00:09: [io 0x00f0-0x00ff]
    [ 0.259513] pnp 00:09: [irq 13]
    [ 0.259526] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.259621] pnp 00:0a: [io 0x0400-0x047f]
    [ 0.259622] pnp 00:0a: [io 0x1180-0x119f]
    [ 0.259623] pnp 00:0a: [io 0x0500-0x057f]
    [ 0.259625] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
    [ 0.259626] pnp 00:0a: [mem 0xfec00000-0xfecfffff]
    [ 0.259627] pnp 00:0a: [mem 0xfed08000-0xfed08fff]
    [ 0.259628] pnp 00:0a: [mem 0xff000000-0xffffffff]
    [ 0.259648] system 00:0a: [io 0x0400-0x047f] has been reserved
    [ 0.259650] system 00:0a: [io 0x1180-0x119f] has been reserved
    [ 0.259651] system 00:0a: [io 0x0500-0x057f] has been reserved
    [ 0.259653] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.259654] system 00:0a: [mem 0xfec00000-0xfecfffff] could not be reserved
    [ 0.259656] system 00:0a: [mem 0xfed08000-0xfed08fff] has been reserved
    [ 0.259658] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.259660] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.259783] pnp 00:0b: [mem 0xfed00000-0xfed003ff]
    [ 0.259800] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.259892] pnp: PnP ACPI: found 12 devices
    [ 0.259893] ACPI: ACPI bus type pnp unregistered
    [ 0.266408] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.266411] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.266413] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfa0fffff]
    [ 0.266415] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf3ffffff 64bit pref]
    [ 0.266418] pci 0000:00:1e.0: PCI bridge to [bus 02]
    [ 0.266444] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.266448] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.266449] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.266450] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.266452] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff]
    [ 0.266453] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 0.266454] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfa0fffff]
    [ 0.266456] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf3ffffff 64bit pref]
    [ 0.266457] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
    [ 0.266459] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
    [ 0.266460] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.266461] pci_bus 0000:02: resource 7 [mem 0xe0000000-0xffffffff]
    [ 0.266463] pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
    [ 0.266464] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
    [ 0.266492] NET: Registered protocol family 2
    [ 0.266910] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.268783] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.269029] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.269063] TCP: reno registered
    [ 0.269073] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.269110] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.269211] NET: Registered protocol family 1
    [ 0.315053] pci 0000:01:00.0: Boot video device
    [ 0.315082] PCI: CLS 64 bytes, default 64
    [ 0.315125] Unpacking initramfs...
    [ 0.353156] Freeing initrd memory: 2804k freed
    [ 0.353546] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.353549] software IO TLB [mem 0xdb452000-0xdf451fff] (64MB) mapped at [ffff8800db452000-ffff8800df451fff]
    [ 0.353859] audit: initializing netlink socket (disabled)
    [ 0.353875] type=2000 audit(1359925523.249:1): initialized
    [ 0.363018] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.364275] VFS: Disk quotas dquot_6.5.2
    [ 0.364309] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.364442] msgmni has been set to 15695
    [ 0.364641] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.364676] io scheduler noop registered
    [ 0.364678] io scheduler deadline registered
    [ 0.364713] io scheduler cfq registered (default)
    [ 0.364792] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.364908] vesafb: mode is 1280x800x32, linelength=5120, pages=0
    [ 0.364910] vesafb: scrolling: redraw
    [ 0.364911] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.365255] vesafb: framebuffer at 0xf1000000, mapped to 0xffffc90005600000, using 4032k, total 4032k
    [ 0.452482] Console: switching to colour frame buffer device 160x50
    [ 0.539642] fb0: VESA VGA frame buffer device
    [ 0.539651] intel_idle: MWAIT substates: 0x1120
    [ 0.539652] intel_idle: v0.4 model 0x25
    [ 0.539653] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.539700] GHES: HEST is not enabled!
    [ 0.539744] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.560441] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.581146] 0000:00:16.3: ttyS1 at I/O 0xf100 (irq = 17) is a 16550A
    [ 0.581313] Linux agpgart interface v0.103
    [ 0.581361] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 0.594604] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.594626] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.594726] mousedev: PS/2 mouse device common for all mice
    [ 0.594777] rtc_cmos 00:06: RTC can wake from S4
    [ 0.594939] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [ 0.594973] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 0.595018] cpuidle: using governor ladder
    [ 0.595079] cpuidle: using governor menu
    [ 0.595112] drop_monitor: Initializing network drop monitor service
    [ 0.595172] TCP: cubic registered
    [ 0.595242] NET: Registered protocol family 10
    [ 0.595362] NET: Registered protocol family 17
    [ 0.595369] Key type dns_resolver registered
    [ 0.595570] PM: Hibernation image not present or could not be loaded.
    [ 0.595576] registered taskstats version 1
    [ 0.596120] Magic number: 1:939:94
    [ 0.596267] rtc_cmos 00:06: setting system clock to 2013-02-03 21:05:24 UTC (1359925524)
    [ 0.597300] Freeing unused kernel memory: 812k freed
    [ 0.597412] Write protecting the kernel read-only data: 8192k
    [ 0.599884] Freeing unused kernel memory: 1248k freed
    [ 0.601056] Freeing unused kernel memory: 476k freed
    [ 0.606451] systemd-udevd[57]: starting version 197
    [ 0.624469] SCSI subsystem initialized
    [ 0.625159] ACPI: bus type usb registered
    [ 0.625179] usbcore: registered new interface driver usbfs
    [ 0.625187] usbcore: registered new interface driver hub
    [ 0.625823] ACPI: bus type scsi registered
    [ 0.625865] usbcore: registered new device driver usb
    [ 0.625875] libata version 3.00 loaded.
    [ 0.626068] pata_acpi 0000:00:16.2: setting latency timer to 64
    [ 0.626104] pata_acpi 0000:00:1f.2: setting latency timer to 64
    [ 0.626423] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.627806] scsi0 : pata_acpi
    [ 0.628229] scsi1 : pata_acpi
    [ 0.628555] ata1: PATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0b0 irq 19
    [ 0.628557] ata2: PATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf0b8 irq 19
    [ 0.628587] pata_acpi 0000:00:1f.5: setting latency timer to 64
    [ 0.633159] scsi2 : pata_acpi
    [ 0.633673] scsi3 : pata_acpi
    [ 0.634669] ata3: PATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf050 irq 19
    [ 0.634672] ata4: PATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf058 irq 19
    [ 0.634727] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 0.634732] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    [ 0.634739] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 0.634756] ehci_hcd 0000:00:1a.0: debug port 2
    [ 0.638765] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    [ 0.638798] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfa126000
    [ 0.647329] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 0.647467] hub 1-0:1.0: USB hub found
    [ 0.647471] hub 1-0:1.0: 2 ports detected
    [ 0.647542] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 0.647545] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    [ 0.647549] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 0.647560] ehci_hcd 0000:00:1d.0: debug port 2
    [ 0.651548] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.651561] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfa125000
    [ 0.660694] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.660928] hub 2-0:1.0: USB hub found
    [ 0.660932] hub 2-0:1.0: 2 ports detected
    [ 0.801747] ata1.00: ATA-8: ST31000528AS, CC38, max UDMA/133
    [ 0.801750] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 0.802139] ata1.01: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
    [ 0.802144] ata1.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 0.803079] ata1.01: no PIO support
    [ 0.953074] usb 1-1: new high-speed USB device number 2 using ehci_hcd
    [ 1.076944] hub 1-1:1.0: USB hub found
    [ 1.077141] hub 1-1:1.0: 6 ports detected
    [ 1.182336] usb 2-1: new high-speed USB device number 2 using ehci_hcd
    [ 1.306076] hub 2-1:1.0: USB hub found
    [ 1.306284] hub 2-1:1.0: 8 ports detected
    [ 1.351793] tsc: Refined TSC clocksource calibration: 3325.000 MHz
    [ 1.351799] Switching to clocksource tsc
    [ 1.385166] usb 1-1.2: new low-speed USB device number 3 using ehci_hcd
    [ 1.541306] usb 1-1.4: new low-speed USB device number 4 using ehci_hcd
    [ 5.935629] ata1.01: no PIO support
    [ 5.935631] ata1.01: disabled
    [ 5.951315] ata1.00: configured for UDMA/100
    [ 5.951734] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
    [ 6.120495] ata2.01: ATAPI: TSSTcorp CDDVDW SH-222AB, SB00, max UDMA/100
    [ 6.120503] ata2.01: no PIO support
    [ 11.257635] ata2.01: no PIO support
    [ 11.257639] ata2.01: disabled
    [ 11.421879] ata_generic 0000:00:16.2: setting latency timer to 64
    [ 11.422293] scsi4 : ata_generic
    [ 11.422400] scsi5 : ata_generic
    [ 11.422428] ata5: PATA max UDMA/100 cmd 0xf150 ctl 0xf140 bmdma 0xf110 irq 18
    [ 11.422430] ata6: PATA max UDMA/100 cmd 0xf130 ctl 0xf120 bmdma 0xf118 irq 18
    [ 11.751474] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 11.751521] sd 0:0:0:0: [sda] Write Protect is off
    [ 11.751523] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 11.751538] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 11.775078] usbcore: registered new interface driver usbhid
    [ 11.775081] usbhid: USB HID core driver
    [ 11.812772] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
    [ 11.813929] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 11.814854] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input0
    [ 11.814908] hid-generic 0003:046D:C31B.0002: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1a.0-1.4/input0
    [ 11.815047] input: Microsoft Microsoft® Comfort Mouse 4500 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1
    [ 11.815422] microsoft 0003:045E:076C.0001: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® Comfort Mouse 4500] on usb-0000:00:1a.0-1.2/input0
    [ 11.817407] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/input/input2
    [ 11.817457] hid-generic 0003:046D:C31B.0003: input,hidraw2: USB HID v1.11 Device [Logitech Logitech USB Keyboard] on usb-0000:00:1a.0-1.4/input1
    [ 12.388733] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
    [ 12.938667] systemd[1]: systemd 197 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 12.961471] systemd[1]: Set hostname to <archlinuxPC>.
    [ 13.159056] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    [ 13.159185] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 13.159221] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 13.159230] systemd[1]: Starting Remote File Systems.
    [ 13.159238] systemd[1]: Reached target Remote File Systems.
    [ 13.159244] systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
    [ 13.159250] systemd[1]: Starting Delayed Shutdown Socket.
    [ 13.159271] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 13.159277] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 13.159292] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 13.159298] systemd[1]: Starting Encrypted Volumes.
    [ 13.159306] systemd[1]: Reached target Encrypted Volumes.
    [ 13.159313] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 13.159334] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 13.159356] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 13.159431] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 13.159472] systemd[1]: Starting udev Kernel Socket.
    [ 13.159488] systemd[1]: Listening on udev Kernel Socket.
    [ 13.159519] systemd[1]: Starting udev Control Socket.
    [ 13.159537] systemd[1]: Listening on udev Control Socket.
    [ 13.159543] systemd[1]: Starting Swap.
    [ 13.159550] systemd[1]: Reached target Swap.
    [ 13.159556] systemd[1]: Starting Journal Socket.
    [ 13.159589] systemd[1]: Listening on Journal Socket.
    [ 13.159600] systemd[1]: Started File System Check on Root Device.
    [ 13.159605] systemd[1]: Mounting Temporary Directory...
    [ 13.191259] systemd[1]: Mounting Huge Pages File System...
    [ 13.194730] systemd[1]: Starting udev Coldplug all Devices...
    [ 13.214643] systemd[1]: Mounting POSIX Message Queue File System...
    [ 13.231452] systemd[1]: Starting Apply Kernel Variables...
    [ 13.240935] systemd[1]: Starting Setup Virtual Console...
    [ 13.252572] systemd[1]: Started Load Kernel Modules.
    [ 13.252592] systemd[1]: Mounted FUSE Control File System.
    [ 13.252605] systemd[1]: Mounting Debug File System...
    [ 13.254667] systemd[1]: Mounting Configuration File System...
    [ 13.274425] systemd[1]: Starting udev Kernel Device Manager...
    [ 13.305170] systemd[1]: Started Set Up Additional Binary Formats.
    [ 13.305183] systemd[1]: Starting Journal Service...
    [ 13.307733] systemd[1]: Started Journal Service.
    [ 13.307763] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 13.726755] EXT4-fs (sda7): re-mounted. Opts: data=ordered
    [ 13.750053] systemd-udevd[127]: starting version 197
    [ 13.921301] systemd-journald[128]: Received SIGUSR1
    [ 14.418021] systemd-journald[128]: File /var/log/journal/9dcd8569a2b14c4f9f53ce4406e57e79/system.journal corrupted or uncleanly shut down, renaming and replacing.
    [ 14.792337] snd_hda_intel 0000:00:1b.0: irq 41 for MSI/MSI-X
    [ 14.877515] input: PC Speaker as /devices/platform/pcspkr/input/input3
    [ 14.893383] e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
    [ 14.893385] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
    [ 14.953180] parport_pc 00:04: reported by Plug and Play ACPI
    [ 5.951986] ACPI: Invalid Power Resource to register!
    [ 14.953337] parport0: PC-style at 0x378
    [ 14.953338] (0x778), irq 5, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
    [ 15.027758] ppdev: user-space parallel port driver
    [ 15.059527] microcode: CPU0 sig=0x20655, pf=0x2, revision=0x3
    [ 15.068458] microcode: CPU1 sig=0x20655, pf=0x2, revision=0x3
    [ 15.068852] microcode: CPU2 sig=0x20655, pf=0x2, revision=0x3
    [ 15.069229] microcode: CPU3 sig=0x20655, pf=0x2, revision=0x3
    [ 15.069558] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 15.124825] ACPI: Requesting acpi_cpufreq
    [ 15.127274] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
    [ 15.127327] ACPI: Power Button [PWRB]
    [ 15.127369] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [ 15.127425] ACPI: Power Button [PWRF]
    [ 15.131162] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
    [ 15.139560] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 15.139628] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 15.139728] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 15.139785] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 15.139838] input: HDA Intel MID Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 15.140068] hda_intel: Disabling MSI
    [ 15.140077] hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
    [ 15.140087] e1000e 0000:00:19.0: setting latency timer to 64
    [ 15.140156] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
    [ 15.140194] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
    [ 15.310985] nvidia: module license 'NVIDIA' taints kernel.
    [ 15.310990] Disabling lock debugging due to kernel taint
    [ 15.335816] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) e0:69:95:a2:d5:75
    [ 15.335819] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
    [ 15.335893] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 9, PBA No: FFFFFF-0FF
    [ 15.335992] mei 0000:00:16.0: setting latency timer to 64
    [ 15.336076] mei 0000:00:16.0: irq 43 for MSI/MSI-X
    [ 15.336761] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.SBRG.AY34 1 (20120913/utaddress-251)
    [ 15.336765] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 15.342893] gpio_ich: GPIO from 180 to 255 on gpio_ich
    [ 15.384478] iTCO_vendor_support: vendor-support=0
    [ 15.392227] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 15.392289] iTCO_wdt: Found a H55 TCO device (Version=2, TCOBASE=0x0460)
    [ 15.392384] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 15.468027] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
    [ 15.570266] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
    [ 15.570395] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 15.762514] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
    [ 16.022159] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
    [ 16.022316] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
    [ 16.022456] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
    [ 16.022589] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
    [ 16.023047] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 16.023288] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 313.18 Wed Jan 9 17:02:09 PST 2013
    [ 18.372541] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
    [ 18.372591] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 34.993202] NVRM: Your system is not currently configured to drive a VGA console
    [ 34.993205] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
    [ 34.993206] NVRM: requires the use of a text-mode VGA console. Use of other console
    [ 34.993207] NVRM: drivers including, but not limited to, vesafb, may result in
    [ 34.993208] NVRM: corruption and stability problems, and is not supported.
    [ 44.447627] EXT4-fs (sda7): re-mounted. Opts: data=ordered,commit=0
    [ 98.242223] fuse init (API version 7.20)
    Thanks everyone for every reply, I'm learning more GNU/Linux in two days than in two years as other Linux distro's user.

  • Solution who encounter 'Setup does not detect Sound Blaster .....' error msg during installat

    For those who encounter 'Setup does not detect sound blaster audio in the system' error upon installing from the installation CD. You can try the steps below that work for me. It seems Windows have lock on to the sound card with an incorrect ID thus the installation CD are not able to correctly identify the card. Be sure to do a backup copy of the registry first incase something goes wrong since we are editing the registry.
    . Go to Start-Run and type in 'regedit' to start the registry editor application.
    2. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\P CI.
    3. You should see listing with 'VEN....'. Expand them by clicking on the + icon and then see if it's listed as unknown or Creative related stuff. Keep note of them.
    4. Right click on those 'VEN......' listing that you have noted earlier and select full permission. Ensure that full control are selected. Now delete all those listed as unknown or Creative related stuff.
    5. Exit registry editor and reboot. Try using the installation CD again.
    Hope it hel
    ps.
    Message Edited by BadBoy on 05-22-2005 09:5 PM

    I only have this problem when i try to install <A href="]Li'veDrvUni-Pack(ENG).exe[/url] ... That driver pack also says that the drivers from cd are the newest ... :S !

  • Adobe Digital Editions does not detect my e-reader

    Can anyone help please? My Adobe Digital Editions does not detect my Sony e-reader and does not appear in my bookshelves. My laptop detects the device without any issues but Adobe does not - I have re-installed twice but still the same.

    Re-installing is not the answer.  Most likely, the issue is either the
    sequence of events that you go through, whether the SONY ereader is
    supported and whether it is registered properly.  Let me go through these in
    reverse order.  I am assuming (dangerous) that the SONY is 'new to you'.  If
    not, then please accept my apologies.
    You start with making sure that the SONY ereader is supported by Adobe
    Digital Editions (ADE from now on).  Check the list of supported devices
    HERE <http://blogs.adobe.com/digitalpublishing/supported-devices>.  If it
    is, then you know that the rest of the process should work.
    Next, attach the ereader to your computer.  Let's assume a Windows
    machine: plug it into a USB port and wait for Windows to recognise it and
    tell you your hardware is ready to use.  If you've done this before, check
    that Windows has added your ereader as a device by going to My Computer and
    looking at the disk drives.  Your ereader should show up.  Then, if you
    haven't registered the ereader with SONY, you should go to their website.
    It will look for attached ereaders and confirm that it finds yours.
    Register it with SONY, using your Adobe ID and password.  SONY will then
    write a small record onto the ereader, which ADE needs to see.  Close the
    SONY website.
    Next, bring up ADE.  If all is well, ADE will recognise your ereader and it
    will show up on your bookshelf.  If there's a problem with the ereader, ADE
    will tell you that, and we can go from there.
    If all is well, you can transfer your ebooks via drag and drop.  When you're
    done, close ADE, but don't disconnect your SONY until it tells you it's
    finished updating itself.  THEN eject it via My Computer or the small icon
    in the system tray at the bottom right of the screen.
    Hope this helps!
    ==================

  • Ricoh PCIe SDXC/MMC Host Controller does not detect SD cards

    Hi,
    My Lenovo Thinkpad X230 has an integrated 4-in-1 SD card reader (SD/SDHC/SDXCMMC), but it does not detect any card I insert. The two cards I have are working correctly under my sister's MacBook. My kernel version is 3.6.10. Here's the output of a few commands :
    lspci -k
    00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
    Subsystem: Lenovo Device 21fa
    00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
    Subsystem: Lenovo Device 21fa
    Kernel driver in use: i915
    00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
    Subsystem: Lenovo Device 21fa
    Kernel driver in use: xhci_hcd
    00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
    Subsystem: Lenovo Device 21fa
    Kernel driver in use: mei
    00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
    Subsystem: Lenovo Device 21f3
    Kernel driver in use: e1000e
    00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
    Subsystem: Lenovo Device 21fa
    Kernel driver in use: ehci_hcd
    00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
    Subsystem: Lenovo Device 21fa
    Kernel driver in use: snd_hda_intel
    00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
    Kernel driver in use: pcieport
    00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
    Kernel driver in use: pcieport
    00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
    Kernel driver in use: pcieport
    00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
    Subsystem: Lenovo Device 21fa
    Kernel driver in use: ehci_hcd
    00:1f.0 ISA bridge: Intel Corporation QM77 Express Chipset LPC Controller (rev 04)
    Subsystem: Lenovo Device 21fa
    Kernel driver in use: lpc_ich
    00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
    Subsystem: Lenovo Device 21fa
    Kernel driver in use: ahci
    00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
    Subsystem: Lenovo Device 21fa
    Kernel driver in use: i801_smbus
    02:00.0 System peripheral: Ricoh Co Ltd PCIe SDXC/MMC Host Controller (rev 07)
    Subsystem: Lenovo Device 21fa
    Kernel driver in use: sdhci-pci
    03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
    Subsystem: Realtek Semiconductor Co., Ltd. Device 8195
    Kernel driver in use: rtl8192ce
    lsmod | grep sd
    sd_mod 29560 4
    scsi_mod 133434 2 libata,sd_mod
    sdhci_pci 10834 0
    sdhci 23695 1 sdhci_pci
    mmc_core 82791 2 sdhci,sdhci_pci
    Nothing new happens if I type dmesg | tail after inserting a card.
    I didn't find any solution after searching on Google, but it seems there are a few other people experiencing the same problem as me. I haven't actively tried anything yet.
    I don't have much experience when it gets to this kind of things, so I hope there are some of you who can help me.
    Thank you!
    Last edited by Fayden (2012-12-22 05:13:09)

    In case someone else has the same problem, there's actually a package in the AUR that fixes the problem : https://aur.archlinux.org/packages/ricoh-e823-fix/
    Install it and enables it with systemd and it should work correctly!

  • Internet connection "Does not detect a dial tone" ????

    Help!
    I have not been able to connect to the internet on my imac G5 for the last couple of weeks. I have tried the usual connect and restart computer and have spoken to my ISP who say it's not to do with them. The message 'does not detect a dial tone' comes up when i try and connect via the modem. I am now at a loss as to what to do. It does appear to be a Mac problem (having spoken to Mac support aswell), but short of re-installing the OS i am not sure what action to take next.
    Any help would be greatly appreciated.
    Thanks in advance

    Welcome to Apple Discussions
    Noticed you are running Panther on an iMac G5? Is that correct?
    What are your external modem settings in your System Preferences>Network/TCP/IP and modem panels? What changed in your system just prior to your not being able to connect to the Internet?
    Short of reinstalling the OS, you can reapply the combo update for the particular version of OS X you are running.
    Please post back.

Maybe you are looking for