Win 7 upgrade causes intermittent IE 8 "Cannot display the webpage" errors

I upgraded my Touchsmart IQ846t from Vista Home Prem 64-bit to Win 7 Home prem 64-bit last week, 9/20/10.
After the upgrade there were about 40 - 50 Windows Updates that I also installed. About 2 days later I began having my problem. When I first bootup I have full access to the Internet. After 20 - 30 minutes, however, if I try to open, or reopen, IE8 I get the subject error. My internet connection, using a wireless broadband MiFi card, is still connected to the internet but IE8 won't open (Firefox and AOL won't either). The usual Microsoft diagnostics, FixIts, etc are no help. The only way to get IE back is to reboot.
Also, I have an HP laptop that was upgraded to Win 7 Home Prem 64-bit at the same time. It uses the wireless card to connect to the internet and has had none of the IE issues I am experiencing with the Touchsmart.
Any help will be greatly appreciated.

Hi Lizzyb,
First, make sure you have the updated Win7 drivers for your wireless LAN. If you update the drivers and find that there are still issues, I would try a System Restore and go back to 9/20 (before installing all the updates) and verify that the hardware works with Win7.
-Chris
I work for HP.
Support Forums are now on your mobile phone: http://m.hp.com/supportforum

Similar Messages

Reporting IAC - Internet Explorer cannot display the webpage error

Hello
We are working on ECC 6, EHP 3, MSS Reports using LaunchPad.
When we try to see the report results, it gives us following error at below URL:
http://domain.com:50000/irj/servlet/prt/portal/prteventname/navigate/prtroot/pcd!3aportal_content!2fevery_user!2fgeneral!2fdefaultDesktop!2fframeworkPages!2fframeworkpage!2fcom.sap.portal.innerpage!2fcom.sap.portal.contentarea?NavigationTarget=ROLES%3A%2F%2Fportal_content%2Fcom.sap.pct%2Fline_manager%2Fcom.sap.pct.erp.mss.bp_folder%2Fcom.sap.pct.erp.mss.roles%2Fcom.sap.pct.erp.mss.manager_self_service%2Fcom.sap.pct.mss.hcm.rpt.iac&ApplicationParameter=S%3DMSS0%26F%3D*HISRETQTA++5%26B%3D20100329%26E%3D20100329%26V%5B1%5D%3DMSS_RPT_SEL_PD1%26OV%3DMSS_RPT_SEL_PD%26R%3D4365AF4B40472508E10000000A000326&CurrentWindowId=WID1269788098656&NavMode=1
Internet Explorer cannot display the webpage
Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
- I am connected to Net very well.
- Not sure abt website problems
- address shown in the address bar is mentioned above
Any idea what is wrong? We were earlier getting IAC exception, and added the permissions to overcome it.
Reagrds
Yash

HI Yash,
Please follow this link http://help.sap.com/saphelp_erp2004/helpdata/en/0c/c28c4024d26e1de10000000a1550b0/frameset.htm.
It will solve your problem. Also make sure that you will give READ access to the end user on this folder.
In case you are still facing with issue, do let us know.
Cheers,
AB

Internet Explorer cannot display the webpage error urgent!

Hi,
I have created a OAF page. am displaying some report data in the page. The VO query is executing more thatn 20 min to get the records after tuning.
Now my problem is, am getting the error "Internet Explorer cannot display the webpage" in 10 mins after the VO query execution started. However, the DB session for this query is still executing at the backend and I am unable to get the same OAF page until the DB session completes.
Could you please help me in this?
Thanks,
Raja.

Raja,
There are two options here :
1) The correct one is to go via concurrent program , because as per web standards a web page should not take max of 3-4 minutes to render.
2) If you still wanna go via your present approach, you need to set profile ICX:Session Timeout which specifies Maximum idle time for the Oracle Applications user session(specified in minutes).
--Mukul

Periodic Internet Explorer cannot display the webpage

while navigating in Apex users occasionally (and more frequently now) are getting "Internet Explorer cannot display the webpage" errors. if they click on refresh or back then click again it works.
i cannot find any errors in any log files that give me any indication why this is happening.
any help is appreciated.
using
Oracle Application Server 10g Release 2 (10.1.2)
and
Application Express 4.0.1.00.03
with
Oracle Database 10.2.0
on
Linux spedb01.spep.com 2.6.9-89.0.26.ELhugemem #1 SMP Sun May 30 09:43:09 EDT 2010 i686 i686 i386 GNU/Linux
Edited by: user12021582 on Dec 20, 2010 3:42 PM

Have not heard of this one. Would consider setting IE "Delete browser history on exit" if you have not already. And setting "Check for newer versions of stored pages" to every time I visit the webpage.

Error message "This program cannot display the webpage when uploading images to Cafe Press

I have had a Café Press shop for five years and except for sometimes being slow, no problems uploading images. Now, suddenly for 3 days I get the message "This program cannot display the webpage
Most likely causes:
• You are not connected to the Internet.
• The website is encountering problems.
• There might be a typing error in the address.
What you can try:
Check your Internet connection. Try visiting another website to make sure you are connected.
Retype the address."
I got the messsage about half way through the uploading of an image. People suggested using "firefox" instead of IE so I now get a similar error message from Firefox. I signed in, clicked on the image I wanted to upload and hit "upload" and get message as follows:
Server not found
Firefox can't find the server at members.cafepress.com.
* Check the address for typing errors such as
ww.example.com instead of
[url=http://www.example.com]www.example.com[/url]
* If you are unable to load any pages, check your computer's network connection.
* If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
None of this makes sense because I WAS connected to the internet (obviously) or I wouldn't have been able to sign in, go to my media basket, browse for the image and click "upload" and watch as the progress bar showed percentage of upload such as 20%, etc. and even went to 100% at times before giving me the error message. Plus I couldn't make a typing error since I wasn't typing anything but uploading an image. Any suggestions?
Whatever your suggestion, I need step by step instructions as I am totally computer illiterate. I don't even know what a "proxy" is and don't know if I have a "firewall" as the message suggests. I have "Comodo" security and am using Windows XP.
I contacted CP which was no help at all. All they did was tell me to clear my cache which I do after every session. Thanks
Nancy
http://www.cafepress.com/calendarflr

Sounds like your desktop application is in fact running from
a server. CHMs were identified as a security risk by Microsoft and
are best suited to the user's PC.
Click
here for more information.

WRT300N v1 Internet Explorer cannot display the webpage

An intermittent problem occurs where occasionally during browsing the web I'll get an Internet Explorer "cannot display the webpage" and then I reload the page and often it works on the reload. The problem is very frequent and so nearly every webpage I try to open I have to reload in order to access it.
A temporary fix is unplugging the WRT300N v1 and plugging it back in. For a while, it works fine, but eventually the problem creeps up again.
I have firmware v 1.03.3
I've got two laptops, one Mac running OS 10.x and one Dell running Vista. I also have a desktop PC running XP. The two laptops use the wireless connection. The PC uses a wired connection. All 3 computers experience this same problem browsing web pages.
I've read the forums and mostly I've seen people talking about problems with the WRT300N v1 as far as the wireless connection, but this time I'm having issues even with the wired connection, so I feel that this issue isn't addressed, or at least I haven't found where it was addressed.
How do I fix this issue permanently?

I too am having the same problem. I used another system with IE7 installed and found that many sites that were "unable to be displayed" were accessed with IE7 on a differant computer system running Windows XP.
I realize it could be a router thing as well....but after i went through all the tech help i could find online it still did not solve the problem. I decided to work it out myself.
I found my solution when trying to go to sites with mp3 files on them. Thats when i discovered that with Windows Vista I had to manually select what program applications would be used to perform IE7 features (webpage content) in order for the pages to load properly.
To do this in Windows Vista - just go to Start / Program Defaults / Set Program Access and defaults From there you can select which programs to open if IE7 cant handle the file extention on its on. That was my problem all along.
You may have to go as far as setting your file associations in Windows Explorer. Windows Vista had set the file extension .php to open with Windows Photo Gallery.
I am still going through all the file types and finding file extentions that are configured wrong within Windows Vista.
UPDATE: I had problems opening webpages from links from online searches that were within various forums and also on websites that required a login but popup a separate window to login to. I don't know if you have the same problem with these sites.
I uninstalled a Windows Update (kb927143) and can now access those. I know this could be risky but I still have my firewall and antivirus running. Until IE7 is fixed its the only choice I have.
To do this in Vista....go to Control Panel ... Programs and Features...then click view installed updates. You will find it there if you have it installed. From there you can uninstall it.
Hope this helps you to solve your problem.
Message Edited by nannahawktx on 08-27-2007 09:02 PM

Internet Explorer7 cannot display the Webpage in forms 10.1.2.3

Hi all,
I have installed forms 10.1.2.0.2 to my laptop under Windows Vista Home Premium and followed the following steps :
1- changed virtual memory to (minimum of 2048 and maximum of 4096)
2- I updated forms 10.1.2.0.2 it to forms 10.1.3 using pathch 3 (patch ID 5983622)
3- I changed the application server Url in forms builder by choosing Edit, preferences, runtime and click on "Reset to default" button and added ?config=jpi at the end of the line.
when i run the form I got the message "Internet Explorer cannot display the Webpage"
when I called the link http://Computer_name:8889/forms/frmservlet?config=jpi
I got a message asking me to allow downloading java plug-in 1.4.2 ( which I know that it is not certified with Vista), So i refused downloading and updated the formsweb.cfg file as Steve Cosner said in his thread Vista Jinitiator problem
and added these new lines to the formsweb.cfg file:
[[jdk15]]
jpi_classid=clsid:CAFEEFAC-0015-0000-FFFF-ABCDEFFEDCBA
jpi_codebase=http://java.sun.com/update/1.5.0/jinstall-1_5_0_12-windows-i586.cab#Version=1,5,0,12
jpi_mimetype=application/x-java-applet;jpi-version=1.5.0_12
jpi_download_page=http://java.sun.com/javase/downloads/index_jdk5.jsp
baseHTML=basejpi.htm
baseHTMLjinitiator=basejpi.htm
baseHTMLjpi=basejpi.htm
baseHTMLie=basejpi.htm
When i run the form I got the same error message "internet Explorer cannot display the Webpage "
Again I called the link : http://Computer_name:8889/forms/frmservlet?config=jpi
then I got a message asking to allow loading and installing JRE 1.5.0_12 , and I allowed downloading and installation
After all of this, the form doesn't run and I get the same message "Internet Explorer cannot display the Webpage "
Is this a forms related problem or an Internet Explorer problem
Please help
Mostafa Abolaynain
Edited by: Mostafa Abolaynain on Jun 5, 2009 12:06 AM

jemar98 wrote:
We have a custom application built alongside Oracle Ebusiness Suite 12.
Launch a form from the Menu Navigator
Click in any field in the form
Focus does not change to the field that was clicked
Focus can be retained by pressing any keyIs this issue with all custom forms or specific ones?
Did you use the TEMPLATE.fmb file when building your custom forms?
Can you find any errors in the JRE Console Window?
Please obtain the FRD log file and see if you can capture more details about the error -- https://forums.oracle.com/forums/search.jspa?threadID=&q=FRD+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

ACE 4710 - Internet Explorer cannot display the webpage randomly

We have a ACE 4710 with a basic config, (see below).
When clicking on a tab from a window within Interent explorer we occasionally get an issue with it returning: "Internet Explorer cannot display the webpage" The details show "Access is denied" accessing a particular line of a javascript file.
We have put one web server out of service in the farm to make sure that this isn't a result of stickyness not quite working.
We have tested extensively by going directly to the web server directly without the load balancer and cannot reproduce the problem but we can produce the issue within a few minutes when going to the load balanced address.
Thanks in advance for any advice.
HOST-1/Admin# show run
Generating configuration....
logging enable
logging fastpath
logging standby
logging timestamp
logging trap 6
logging history 6
resource-class SLB_ResourceClass_T_R
limit-resource all minimum 10.00 maximum unlimited
resource-class sticky
limit-resource all minimum 10.00 maximum unlimited
boot system image:c4710ace-t1k9-mz.A5_1_2.bin
peer hostname HOST-2
hostname HOST-1
interface gigabitEthernet 1/1
switchport access vlan 1000
no shutdown
interface gigabitEthernet 1/2
shutdown
interface gigabitEthernet 1/3
description LB003
switchport access vlan 1
shutdown
interface gigabitEthernet 1/4
description LB004
switchport access vlan 2
shutdown
interface port-channel 1
port-channel load-balance src-dst-port
no shutdown
clock timezone standard GMT
switch-mode
context Admin
description SUTLB01
member SLB_ResourceClass_T_R
access-list ALL line 8 extended permit ip any any
access-list ALL line 16 extended permit icmp any any
access-list everyone line 8 extended permit ip any any
access-list everyone line 16 extended permit icmp any any
probe tcp probe_tcp_80
port 80
rserver host Server_S_W301
description Server_S_W301
ip address x.x.32.152
inservice
rserver host Server_S_W302
description Server_S_W302
ip address x.x.32.154
inservice
serverfarm host sfarm_T_R
description sfarm_T_R
predictor leastconns
probe probe_tcp_80
rserver Server_S_W301 80
rserver Server_S_W302 80
    inservice
sticky http-cookie Cookie1 T_R_sticky_cookie
cookie insert browser-expire
timeout 3600
serverfarm sfarm_T_R
class-map match-any T_R_L4Class
2 match virtual-address x.x.33.150 tcp eq www
class-map type management match-any remote_access
2 match protocol xml-https any
3 match protocol icmp any
4 match protocol telnet any
5 match protocol ssh any
6 match protocol http any
7 match protocol https any
8 match protocol snmp any
policy-map type management first-match remote_mgmt_allow_policy
class remote_access
    permit
policy-map type loadbalance first-match T_R_L7policy
class class-default
    sticky-serverfarm T_R_sticky_cookie
policy-map multi-match T_R_L4Policy
class T_R_L4Class
    loadbalance vip inservice
    loadbalance policy T_R_L7policy
    loadbalance vip icmp-reply active
    nat dynamic 2 vlan 1000
interface vlan 1000
ip address x.x.33.148 255.255.254.0
access-group input ALL
nat-pool 2 x.x.33.151 x.x.33.151 netmask 255.255.254.0 pat
service-policy input remote_mgmt_allow_policy
service-policy input T_R_L4Policy
no shutdown
ip route 0.0.0.0 0.0.0.0 x.x.32.1
ssh key rsa 1024 force

+------------------------------------------+
+-------------- HTTP statistics -----------+
+------------------------------------------+
LB parse result msgs sent : 421347     , TCP data msgs sent       : 2099597
Inspect parse result msgs : 0          , SSL data msgs sent       : 0
                      sent
TCP fin msgs sent         : 6169       , TCP rst msgs sent:       : 769
Bounced fin msgs sent     : 5          , Bounced rst msgs sent:   : 1
SSL fin msgs sent         : 0          , SSL rst msgs sent:       : 0
Drain msgs sent           : 337811     , Particles read           : 5040829
Reuse msgs sent           : 0          , HTTP requests            : 342499
Reproxied requests        : 183422     , Headers removed          : 37475
Headers inserted          : 342124     , HTTP redirects           : 0
HTTP chunks               : 224859     , Pipelined requests       : 71466
HTTP unproxy conns        : 267246     , Pipeline flushes         : 0
Whitespace appends        : 0          , Second pass parsing      : 0
Response entries recycled : 71302      , Analysis errors          : 0
Header insert errors      : 22         , Max parselen errors      : 215
Static parse errors       : 99         , Resource errors          : 0
Invalid path errors       : 0          , Bad HTTP version errors : 0
Headers rewritten         : 0          , Header rewrite errors    : 0
SSL headers inserted      : 0          , SSL header insert errors : 0
SSL spoof headers deleted : 0         , Unproxy msgs sent         : 267246
HTTP passthrough stat     : 0
NOTE - We did turn on caching at one point to try and resolve the issue but it has since been turned off

Accessing https url EBS R12.1.3 leads to "Internet Explorer cannot display the webpage"

Hi all,
DB:11.2.0.3.0
EBS:12.1.3
O/S:Solaris SPARC 64 bits
I.E Browser: 9.0
Problem Description
Cloned target database TEST1 from source database TEST2 RMAN full backup. But on accessing https url EBS R12.1.3 leads to "Internet Explorer cannot display the webpage"?
Autoconfig completes successfully on both DB and Apps Tier and have also ran ojspcompile but still the same issue.
$ perl ojspCompile.pl --compile --flush -p 2
logfile set: /t000/test1/inst/apps/TEST1_Hostname/logs/appl/rgf/ojsp/ojsp
starting...(compiling all)
using 10i internal ojsp ver: 10
synchronizing dependency file:
loading deplist...8095
enumerating jsps...8095
updating dependency...0
initializing compilation:
eliminating children...6024 (-2071)
translating and compiling:
translating jsps...6024/6024 in 7m50s
compiling jsps...6024/6024 in 35m17s
Finished!
Bounced the services there after still the same issue. Could anyone please share the fix if encountered such an issue before.
Thanks for your time,
user10088255

Apache logs have the below entry:
[Sun Oct 27 02:30:11 2013] [notice] configured -- resuming normal operations
[Sun Oct 27 02:30:11 2013] [notice] Accept mutex: fcntl (Default: fcntl)
[Sun Oct 27 03:03:02 2013] [notice] configured -- resuming normal operations
[Sun Oct 27 03:03:02 2013] [notice] Accept mutex: fcntl (Default: fcntl)
[Sun Oct 27 04:04:59 2013] [notice] configured -- resuming normal operations
[Sun Oct 27 04:04:59 2013] [notice] Accept mutex: fcntl (Default: fcntl)
[Sun Oct 27 04:29:54 2013] [notice] configured -- resuming normal operations
[Sun Oct 27 04:29:54 2013] [notice] Accept mutex: fcntl (Default: fcntl)

Export to Excel Fails with "Internet Explorer cannot display the webpage"

We have a couple of report servers all hosted internally on VMs. They are all SSRS 2008 R2.
For all of these, when viewing the reports remotely in IE, they run fine. However when we try to export them to excel, a new tab opens in IE, but the tab just displays with "Internet Explorer cannot display the webpage"
There are no other errors and it never progresses to save or open.
THE SSRS log files dont contain any errors either so i dont think its a resource issue, but they do say steam=''
library!ReportServer_0-1!11cc!03/11/2014-08:49:24:: i INFO: RenderForNewSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!11cc!03/11/2014-08:49:27:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!11d4!03/11/2014-08:49:31:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!11d4!03/11/2014-08:49:31:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!7a0!03/11/2014-08:49:44:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!7a0!03/11/2014-08:49:45:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!624!03/11/2014-08:51:05:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!624!03/11/2014-08:51:05:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!18d0!03/11/2014-08:51:06:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!18d0!03/11/2014-08:51:07:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!7a0!03/11/2014-08:51:34:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!7a0!03/11/2014-08:51:34:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!1610!03/11/2014-08:51:38:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!1610!03/11/2014-08:51:39:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!624!03/11/2014-08:51:49:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!624!03/11/2014-08:51:49:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!11d4!03/11/2014-08:52:14:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!11d4!03/11/2014-08:52:14:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!WindowsService_0!3c8!03/11/2014-08:52:28:: i INFO: Call to CleanBatch()
library!WindowsService_0!3c8!03/11/2014-08:52:28:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
library!WindowsService_0!3c8!03/11/2014-08:52:28:: i INFO: Call to CleanBatch() ends
library!ReportServer_0-1!11cc!03/11/2014-08:55:29:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!11cc!03/11/2014-08:55:29:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
Does anyone have any suggestions?

Hello,
Since you have motioned that it is work well in IE7 on the VM. We can try to enable the compatibility view of the IE to troubleshooting the issue.
Reference: http://support.microsoft.com/kb/2536204
Based on your description, the issue is just occur when view the report remotely. The issue may relate to Internet Explorer, please refer to the following methods:
Run the Network Diagnostics tool in Internet Explorer.
Reset the modem or the router.
Use the Delete Browsing History feature.
Use the Internet Explorer (No Add-ons) mode.
More detail information, please refer to the similar issue below:
http://answers.microsoft.com/en-us/ie/forum/ie8-windows_other/internet-explorer-cannot-display-the-webpage/c8a0b157-820a-4a14-80f3-806ab51717fa
Hope this helps.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

"SharePoint Designer cannot display the item" error when edit workflow

Hi
I create workflow for sharepoint list in version 2007. Then upgrade sharepoint form version 2007 to 2010. Now when I want to edit this workflow, get this error:
“SharePoint Designer cannot display the item.
What you can try:
Click the Refresh button or press F5 to refresh the content from your site.
Go back to the previous page
Most likely causes:
The file has been deleted from the site.
The site is encountering problems.”
What is the problem?
Thanks.

Hi,
Have you used custom activity in your workflow? We may come across this issue when we use custom activity. A workaournd is to modify the Workflows XOML file, and remove custom activity reference from it. And restart your SharePoint designer. See below blog.
http://saiabhilash.blogspot.com/2011/11/sharepoint-designer-cannot-display-item.html
Or a quick workaround is recreate the workflow in SharePoint Designer 2010.
Thanks & Regards,
Emir
Emir Liu
TechNet Community Support

ISQLPLUS : Internet Explorer cannot display the webpage

Hi,
on 10g R2 on Win 2003 server when I (being logged as sysman) click on iSQLPLUS link on DB control, and give agreement to display in http and not https I receive :
Internet Explorer cannot display the webpageisqlplus Windows service is running and I have started iSQLPLUS :
E:\oracle\product\10.2.0\db_1\BIN>isqlplusctl start
iSQL*Plus 10.2.0.4.0
Copyright (c) 2003, 2007, Oracle. All Rights Reserved.
Starting iSQL*Plus ...
iSQL*Plus started.Any idea ?
Thanks.

Pl see if MOS Doc 300547.1 (Troubleshooting Guide for iSQL*Plus issues) can help
HTH
Srini

Internet Explorer cannot display the webpage

Hi I've had the trial version working for 5 months and yesterday it stopped working.
Can't preview the view layout or run the application getting the same error in internet explorer.
The only thing I can think of is that I've installed Microsoft Virtual PC and it's conflicting ( Allthough the whole point of Virtual PC is that it doesn't cause problems ! )
I have an entry in my hosts file as follows :
: : 1 localhost
All the usual services are active in SICF. I've even tried deactivatingthem and reactivating them.
Any ideas or has anyone suffered a simular problem. Not sure what else to check or how I can test the service etc

Hi,
The trial version han't expired. I'm still using it fine excepting running Web Dynpro Applications.
I don't have any Proxy settings and all the relevant services are active.
It looks like the localhost server is running but the web dynpro applications cannot find it.
Lost, I am. Any more ideas anyone?
Thanks

Error while testing demo app:Internet Explorer cannot display the webpage

HI Gurus,
I am new to the webdynpro development. I was starting with building demo application. However, finding below error while testing it using se80 transaction. Please suggest if any configuration is missing or anything else.
I am using ECC6 : 720 Final Release....
Error is below :
This problem can be caused by a variety of issues, including:
u2022Internet connectivity has been lost.
u2022The website is temporarily unavailable.
u2022The Domain Name Server (DNS) is not reachable.
u2022The Domain Name Server (DNS) does not have a listing for the website's domain.
u2022There might be a typing error in the address.
u2022If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section.

Thanks sanasrinivas,
I did the steps as mentioned by you. I also checked the link http://wiki.sdn.sap.com/wiki/display/EP/12ITSWebGUI-Activation(BackEnd) to activate the its webgui. Now the new error is coming as mentioned below.
Note: After running webdynpro application a login screen apears and after giving uid and pwd following error appears. however, while testing the service in sicf, logon happens successfull.
The URL ).
Please let me know if anything is missing or the further steps i can take.
Thanks,
Janisar
Edited by: janisar.munshi on Feb 15, 2012 3:33 PM
Edited by: janisar.munshi on Feb 15, 2012 3:36 PM

RV120W ROUTER/FIREWALL "cannot display the webpage"

I have a small LAN utilizing a T1 line from One Communications. Static IP address.
30 workstations. Windows 2003 DHCP server.
Installed new RV-120W firewall router last week replacing an old Netgear unit.
Setup VPN tunnel on unit, have remote access in for about 10 users.
That part works good. A tad slow, but acceptable.
My Issue: internet connectivity on internal LAN is in and out. It is extrememly choppy.
Download and Upload speeds have been consistent (~2.5M/sec)
External Pings show very minimal loss if any.
Users have seem intermitant loss of web streams and corrupt downloads. 90% web activity is ok, but then we keep getting "cannot display webpage error".
NSLOOKUP will show DNS, but occasssionally "TIMEOUT" occurs.
I had provider perform loop-back tests and replace WIC on CISCO T1 1841 Router, but I am still seeing the behavior.
In reading other forms, I am seeing this is a continuous issue with the RV routers.
My settings...
Static IP / DNS on Router.
MTU set back at 1500. I have adjusted it down incrementally to 1350.
Windows 2003 Server has RV120W address as router / gateway.
T1 to CISCO 1841 ROUTER... to CISCO RV120W...to LAN via (2) CISCO SLM248G Switches.
I did not setup any port forwards.
I am continuing Line tests on my end, but like I said this issue was not existent with Netgear unit.
Please advise with any setting changes / suggestions.

Hi Jason et al..
i believe the technician are now aware of a UDP issue on the Rv120W.
The internal discussions on the issue from R&D and development seems to be;
1.       By default on RV120W there is a UDP Flood attack check which limits 25 UDP Connections Per Client in one instance, i.e at a particular time instance a PC behind this router can establish only 25 UDP Transactions, if we exceed router drops UDP Packets.
2.       We have a script that sends dns lookup queries at a very high rate than the router clears the UDP entries, this way we build up the UDP entry table in the router(i.e 25 entries)
3.       Once 25 limit is reached we are unable to resolve further DNS queries, using the script or using the browser.
4.       In the real world scenarios there might be one PC behind the router and open a website where all the items on the webpage are linked to different website, if you open this kind of website it may have links to more that 25 different website and clog the routers UDP table for that particular PC and user might not be able to resolve further DNS queries and unable to browse any new websites. This unability to browse happens until the UDP entries on the router time outs and are cleared.
5.       This limit of 25 is because of the feature called Block UDP flood on the router which is enabled by default.
6.       Once we disable the block UDP Flood, router does not check for 25 UDP Connections limit and dns resolution is continuous without a break.
This is what a customers in the field might be seeing interruptions in DNS resolutions and website browse failed.
Some customers explicitly talked about DNS failures.
Jason I can see you have placed a service call, so hopefully CCORAL who posted on the 15 August should be helping you.
So Folks, If the Technician deem the problem not a hardware issue requiring RMA, the technician will escalate the call to our Level 2 folks in Irvine, probably CCORAL. You will get assistance to resolve this issue.
The Small Business Support center, should be aware of the problem. Please feel free to show them this posting, i am willing to chat with them to get the ball rolling.
So again, if you have not done so already, please contact the SBSC and place a service request and keep a copy of that number they give you as a reference (you may need it). My appologies for the inconvenience you have all had.
regards
Dave Hornstein
Small Business, Channel Systems Engineer
Cisco - Research Triangle Park. USA
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html

Win 7 upgrade causes intermitte​nt IE 8 "Cannot display the webpage" errors

Similar Messages

Maybe you are looking for

Win 7 upgrade causes intermittent IE 8 "Cannot display the webpage" errors