Win 7 VPN Client 5.0.07 no longer works properly with Citrix DNE Update

Since Cisco Systems VPN Client does not work properly with mobile broadband on Windows 7, we've been successfully using Citrix's DNE Update to fix this for about 6 months. All of a sudden, machines with the DNE Update stopped working properly over VPN (whether using mobile broadband or not). The only fix is to unbind the DNE Lightweight driver from your network adapters, uninstall the DNE Update and reinstall the VPN Client. However, then you cannot use an aircard with VPN as the DNE Update was the fix.
Symptoms of the VPN issues with DNE Update:
-web pages displaying garbled
-internal web pages not rendering at all
-remote connectivity not working (VNC)
-RDP connects then crashes with data encryption errors
The only change that I can identify on our machines and in our environment would be Windows updates, but I've been unable to identify which one might have caused the problem.
Has anyone encountered this issue and found a fix? Does anyone know of another reliable fix for VPN Client to work with Windows 7 and aircards?
We're looking at moving to another VPN solution but that will take time and we need a more immediate solution.
Thanks in advance for your help.
Tony

Hi Prapanch
No offence . . . .  but you need to read the complete thread before posting re:IP address & gateway
I'm not posting head end config because the config works with XP
There are no W7 specific parameters with ASA 8.3(2)
Multiple W7 machines have been used to test this.
We are looking at extracting level 15 logs from the client end - I will post if they don''t give an obvious answer.
TAC still not able to resolve this.
Rgds
Barry

Similar Messages

  • HT1665 Why does my ihome no longer work properly since my iPod update

    My ihome no longer works properly since I updated my iPod to the most current software update. Is there a fix?

    Sometimes thisworks:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    However,sometimes an iOS update breaks compatibility and you have to wait for either an iOS update or and update to the iHome firmware. Go to iHome's support site

  • Java no longer working properly since last firefox update

    Since the latest firefox update, Java no longer works as it should on my banking website. The authorisation procedure uses Java, but the box freezes and does not finish loading. It still works fine on IE. I use Windows 7.

    Mozilla are aware of the issue in Firefox 3.6.14 with some Java applets not working and are working on a fix, no timescale but they are planning on a quick release.

  • 3rd party keyboard no longer works properly with Yosemite

    Prior to the update to Yosemite my third party bluetooth keyboard paired without issue on my wizened 2007 MBP workhorse. I unfortunately spilled some liquid on the keyboard recently. A few keys no longer respond. I will be replacing the keyboard, being cheeper than replacing the entire computer. I brought out my third party bluetooth keyboard, and it initially paired fine under Yosemite. I went into the keyboard preferences to see if I could improve the key mapping with the function keys. Selected "set up bluetooth keyboard" which seemed to reset the connection. Since, the keyboard no longer worked completely. Letters, numbers, and function keys, respond, but none of the letter keys. I re-paired it multiple times to the same effect (forget - pair). The keyboard still pairs fine with my iPhone 6, with the Apple Mouse still pairs fine with the laptop. Is there any way to fix this problem? The keyboard technically is pairing!
    I am using an old apple USB keyboard as plan B until the main keyboard is replaced. However, this is especially frustrating, because one of the reasons why I bought that keyboard was in case the old laptop's keyboard developed issues!

    Do either of these typical troubleshooting steps make any difference?
    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Command+Shift+r to reload the page fresh from the server.
    Alternately, you also can clear Firefox's cache completely using:
    "3-bar" menu button (or Firefox menu) > Preferences > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now"
    If you have a large hard drive, this might take a few minutes.
    (2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
    * right-click and choose View Page Info > Security > "View Cookies"
    * (menu bar) Tools > Page Info > Security > "View Cookies"
    * click the globe or padlock to the left of the address in the address bar > More Information > "View Cookies"
    In the dialog that opens, you can remove the site's cookies individually.
    Then try reloading the page. Does that help?
    In case one of your extensions is involved, could you test the page in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
    You can restart Firefox in Safe Mode using either:
    * "3-bar" menu button > "?" button > Restart with Add-ons Disabled
    * Help menu > Restart with Add-ons Disabled
    Not all add-ons are disabled: Flash and other plugins still run
    After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
    Any difference?

  • HT3176 Apple TV sleep mode remote shortcut no longer works? with new software update. Why? Is there an alternative other than nav to settings menu?

    Apple TV sleep mode remote shortcut no longer works with newest software update. Why? Is there an alternative other than nav to settings menu? Reset remote shortcut dead as well. :(

    Hold Menu + Play/Pause to reboot the box from the main menu.

  • The sharepoint my company uses no longer works properly with firefox, only a blank page appears, is there a fix for this?

    Hello,
    We currently use Microsoft SharePoint Server 2010 and it doesn't seem to be compatible with the latest version of Firefox (33). When I try to open a sharepoint page, only a blank page appears. I do not get any error messages. The sharepoint works with other browsers, such as Chrome.
    Is there a work around available so that we may continue to use Firefox?
    Thank you!

    Do either of these typical troubleshooting steps make any difference?
    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Command+Shift+r to reload the page fresh from the server.
    Alternately, you also can clear Firefox's cache completely using:
    "3-bar" menu button (or Firefox menu) > Preferences > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now"
    If you have a large hard drive, this might take a few minutes.
    (2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
    * right-click and choose View Page Info > Security > "View Cookies"
    * (menu bar) Tools > Page Info > Security > "View Cookies"
    * click the globe or padlock to the left of the address in the address bar > More Information > "View Cookies"
    In the dialog that opens, you can remove the site's cookies individually.
    Then try reloading the page. Does that help?
    In case one of your extensions is involved, could you test the page in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
    You can restart Firefox in Safe Mode using either:
    * "3-bar" menu button > "?" button > Restart with Add-ons Disabled
    * Help menu > Restart with Add-ons Disabled
    Not all add-ons are disabled: Flash and other plugins still run
    After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
    Any difference?

  • Ever since i downloaded OSX Mountain Lion, Express VPN no longer works properly for me. Even though it says I am connected, webpages refuse to load. However, everything works fine when its turned off. I cannot go on many websites without the VPN.

    Ever since i downloaded OSX Mountain Lion, Express VPN no longer works properly for me. Even though it says I am connected, webpages refuse to load. However, connection speed is fine when its turned off. I cannot go on many websites without the VPN. My current location is Shanghai, China. OSX Mountain was installed this morning and everything worked fine until then. Is Express VPN not supported? What do i need to do in order to get it working again on my Macbook Pro (early 2011). I want to be able to go on websites such as Youtube, Facebook, Twitter, ect...

    Hi,
    I am having the same issue listed above on my new Mac Mini i just bought, I also contacted Express VPN support and got the same instructions with exception of the command to run in the utilities terminal.  I tried the steps listed, and both commands (posted here, and sent to me directly by Express VPN support), and still unable to connect on my Mac Mini running OS X 10.8.2, but I am able to connect on my iPad and my MacBook which is running Mac OS X 10.6.8.  Usually Express VPN is spot on with their customer support, but this is taking longer to get resolved.  Here is the steps sent to me
    Try doing the following to see if the problem gets resolved:
    Please follow the instructions here: https://www.expressvpn.org/support/setting_dns_servers_mac_os
    (should still be the same for Lion) and then add the following DNS servers: 8.8.8.8 & 208.67.222.220. After adding the DNS servers, please do the following steps as well:
    Note: If you're connecting to your ISP via a PPPoE connection, then set the DNS servers on the PPPoE connection itself and then restart your computer for the DNS settings to take effect.
    1. Click on Applications
    2. Click on Utilities
    3. Click on Terminal
    4. Type the following command (without the quotes): "sudo killall -HUP mDNSResponder"
    5. Press enter and then try reconnecting to the VPN.
    If you're still unable to connect, please send us in the latest log files.
    Hope this helps. Let us know how it goes.

  • TS3789 I have similar problem, my apple tv which has always worked properly with my Samsung tv will no longer play any audio after the latest 5.1 upgrade. Very frustrating as it was working perfectly before. I am starting to not trust apple upgrades until

    I have similar problem, my apple tv which has always worked properly with my Samsung tv will no longer play any audio after the latest 5.1 upgrade. Very frustrating as it was working perfectly before. I am starting to not trust apple upgrades until proven for example ios6 on iPhone with that stupid map app instead of google maps.
    I just want to buy and hear my iTunes music and videos on my apple tv, could before cant now. Thank you apple. Time to pack up the apple tv and start torrenting without the ios-bs.
    Disheartened apple fan.

    Welcome to the  discussion forums.
    Try going to synching in the sources menu on your tv and selecting 'change itunes library', when it gives you the passcode check itunes to see if the tv is showing up as a new device, if so try entering the pass code. It may be that your tv is seeing itunes as a different library because of a recent upgrade.

  • Clicking on iTunes ikon and I get the message the item iTunes.exe that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly.  What can I do, I can't open Itunes.  I have over 4000 songs in iTunes that I had

    When I click on the iTunes ikon I get a box pop up which reads  Problem with shortcut.  The item iTunes.exe that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly.
    My computer which is a packard bell vista operating system, recently stopped working as the power supply overheated and blew up and it has recently been sent back to the Know How team at PC world and it seems to be since it came back I now cannot open iTunes.  I have also tried to search for iTunes in the search bar, I can see several files, but can't seem to open any of these either.  I think that quicktime isn't working, either.
    I have over 4000 songs in iTunes that I had recorded from my collectiong of CD's am  going to loose all these now?  Can anyone help, with very easy instructions as I really don't know what I am doing??
    Thanks

    I would copy over the entire thing if you have room.  With iTunes 10.4 though, you can download any previous iTunes purchases you have made in the past with your current iTunes account.  While in iTunes, look at the left hand side of your screen and select "Purchases" and look at the bottom right corner of the screen and select "Download Previous Purchases".  If you have an iPhone, iPod and/or iPad...you can do the same thing from each device.  Nice new feature...just remember that those ripped CDs need a back-up!!!  Enjoy...

  • Help, web cam is not working properly with win vista

    Hii.. my web cam is not working properly with win vista..even if the icon appears bt it does nt start.. its
    lenovo easy capture 2.5...so if u cud suggest me anything...
    Moderator note; subject edited

    re-install drivers and try again. ( also easy capture )

  • Getting error message : the item Itunes.exe that this shortcut refers to has been changed or moved so this shortcut will no longer work properly. I get this either using the start menu or the desktop shortcut. I tried going to programs /itunes and repair.

    Getting the error message:
    the item Itunes.exe that this shortcut referes to has been moved or changed so this shortcut will no longer work properly.
    I tried going into the control panel/programs /itunes and selected repair which didn't fix it. Any suggestions on restoring the broken shortcut without removing and re-installing the program?
    Running windows 7 home premium SP1
    Thank you

    I think it is some sort of permissions issue preventing the installer from updating the shortcuts. Is your account an administrator of the machine? If it is and you still have the problem then you may need to explicitly use the "Administrator" account for the install.
    tt2

  • Epson printer driver no longer working after 10.4.11 update

    It seems that my original Epson driver for my Stylus Photo 750 is no longer working after my latest Tiger update. The system does recognise it but shows an exclamation mark behind it and refuses to print with it (the document stays in the waiting line forever). Reinstalling as well as repairing permissions didn´t help. Fortunately the Gimp Epson driver is still working but I have no access to my coloursync profiles with this driver.
    I know that many printer drivers need to be rewritten for Leopard (one of the reasons I didn´t update yet) but it is not understandable why problems happen with a Tiger update.
    Does anyone know a workaround?
    Thanks very much
    Wolfgang

    I just discovered a similar problem. I have an old Epson SC3000 and under 10.4.11 my computer doesn't communicate with the printer. It's an AppleTalk printer, connected via Ethernet. I tried bypassing my network switch and connected it directly to the Mac-- no go. I then rebooted into 10.3.9 and printing works fine.
    I downloaded the driver from Epson and installed it in 10.4.11. When I try to add the printer in the Printer Setup Utility, the machine just hangs-- can't force quit the utility and eventually the Finder even stops responding. It takes a hard reboot to clear up.
    I can't say whether or not printing worked in earlier versions of 10.4. I haven't been using 10.4 for very long, and I rarely use the SC3000.

  • Dear ladies and gentlemen! I recently received on my notebook, operating system 8.1, the message "Adobe Acrobat is no longer working properly". I also found myself that I can copy from einerPDF file excerpts not without problems in another document. My Ad

    Dear ladies and gentlemen!
    I recently received on my notebook, operating system 8.1, the message "Adobe Acrobat is no longer working properly". I also found myself that I can copy from einerPDF file excerpts not without problems in another document. My Adobe Acrobat 9 Pro has released version 9.0.0. Two updates this version is not listed. Please inform me how I can fix this problem.
    Sincerely, Walter Hacksteiner
    mailto: [email protected]

    The first thing I would try is to update Acrobat 9 to the latest version 9.5.5
    The next thing would be to run Acrobat 9 in Windows 7 or Vista or XP Compatibility Mode.

  • I cannot open itunes on windows.  It keeps saying short cut has changed or moved no longer working properly.  I have tried everything.  can someone please help.  I have a older version of windows running.  I cannot even do a repair on my computer

    I cannot open itunes on my windows (older verson of windows) It keeps saying short cut has change or moved and no longer working properly.  I have tried to do a repair on the file but the computer wont let me.   I have tried reinstalling itunes but still not working.  Is there anything you can sugguest please as I need my itunes.I have looked through the support questions and have tried everything.  I have on Bonjour on my computer.  Thanks heaps.

    See  Troubleshooting issues with iTunes for Windows updates for a complete set of iTunes rebuild steps.
    tt2

  • Interactive PDF: Rollover button state no longer working properly  ???

    Okay, what's going on with the Interactive PDFs lately?
    Now all my rollover buttons no longer work properly.  If I have a button that's simply a black arrow, and in the rollover state it's red.
    No matter if I'm checking it out in the latest Acrobat Reader or Pro X, the rollover only works for a brief second..then reverts back to black - the original state.
    This, combined with my latest problem with the show/hide button state, is really becoming a frustrating hassle:
    http://forums.adobe.com/message/3933451#3933451
    Any help would be appreciated.
    I'm running 7.5.1.
    Is this an Acrobat issue?  The button function here seems to work in the InDesign preview mode.

    Hhmmm...I'm actually having this problem even with Adobe Acrobat 9 Professional. Does this make sense?
    Again, I'm creating the document in InDesign CS5 and then building the PDF with  Adobe Acrobat 9 Professional, and the rollover effects don't work in Adobe Acrobat 9, Adobe Reader 9, and Adobe Reader 10.
    I'm a bit new to this process of software not providing its basic touted functionality. Is this the kind of thing where support for this functionality will vary from product to product? I had the same issue with PDF Portfolio -- where all its functioanlity was not supported in Adobe Reader X. If so, perhaps I should simply stick with the classic features of PDFs. Or can I trust, reliability, that going forward, this rollover effect will be supported in all Adobe Reader versions? This is quite an important issue for me as I provide all the documentation for my employer, including customer facing documentation -- and I simply don't know. Any recommendations?

Maybe you are looking for