Win 7 Wifi not working after upgrading to 10.9.4

After the update I am not able to get Wifi connection on my Bootcamp 5.1.2 with Windows 7 Professional. The wifi icon gets a red X and it can't se any network at all where it earlier could se several networks. Its running on a Macbook Pro Retina, Mid 2012 2,3GHz i7. Also my external keyboard is not working anymore when booting to Win.
Everything was working perfect before the update and somehow it seems like the the Apple Windows support software is not working anymore (I am guessing).
I have tried to download the support software again to a USB and reinstall on Windows but no change.
Since I have been reading that there has been a issue with a Apple wifi update on 10.8 I tried the workaround from that thread and restarted the bootcamp in many different ways but still no changes.
I guess that this requires a new update from Apple - but I can't find any way to report this issue without having to pay for it!
Anyone who are experiencing the same or maybe someone who has a solution I would appreciate it - thanks.

After i reinstalled Bootcamp with Windows 7 it was all working fine again with OSX 10.9.4.
The bad news is that I just updated OSX again to the new 10.9.5 and now I am back where I started again - no network connections.
It can't be a coincide that it is the same pattern again and a bit annoying if the solution is to reinstall Bootcamp every time there is a update - hope anyone can give me some hints?

Similar Messages

Iphone 3G wifi not working after upgrade

Iphone 3G wifi not working after software upgrade, no proper fix from Apple. APPLE SUPPORT - R U SLEEPING.......

You are not talking to Apple. This is a user to user forum.
If you're using the iPhone 3G, there will be no fix for your problem. The software you have, 4.2.1, is the end of the line for the 3G. Apple is no longer providing software updates for the 3G.

Time Machine backup over wifi not working after upgrade to 10.6.3

I have a firewire external hard disk connected to directly into my imac which I use for back-up. The imac is wired into an ethernet LAN. I also backup my MacBook Pro to the same hard disk. The MacBook is connected to the backup disk via a wifi link to a router. All has been working well until I upgraded Snow Leopard to 10.6.3 and now the back-up is not working for the MacBook. The same thing happened after the last point release upgrade but at the time I thought it must have been user error. Last time I had to trash the backups and start from scratch. Can anyone shed any light?

Try reselecting the drive (from the laptop) via TM Preferences > Select Disk (first select the "none" drive, then the correct one).
If that doesn't help, try a "full reset" of TM on the laptop, per #A4 in the Time Machine - Troubleshooting *User Tip,* also at the top of this forum.

Wifi not working after upgrade

This morning, after the upgrade of mij MacBook to OSX 10.8.5 my wifi is not working anymore.
Technically it is ok, in recover mode, it is working, so it is a software problem.
Is this a known issue?
Regards,
Eric

There have been a lot of people having this issue...Especially the 2008 model which is the unibody aluminum version. Found that they have to revert back to 10.8.4 to get it working again.

3GS Iphone wifi not working after upgrade

I upgraded my 3GS iPhone to version 6.1.1
After upgrading the iPhone I noticed that wifi wasn't working from the typical areas of my house, so I looked for a fix on these Community Forums and elsewhere on the web. Nothing has worked. I reset the network settings and tried amny other proposed fixes. Then, I walked to within 10 feet of the AEBS, and noticed a weak WIFI signal. Bluetooth worked just fine by the way.
I then upgraded my Gen 4 Airport Extreme Base Station to the latest firmware "hoping" that my resolve the loss of WIFI on the iPhone. It didn't.
I am going to try a factory reset next.
Any other recommendations? May the impending iOS 6.1.2 will revive the WIFI on my 3GS? I can only hope at this point.
Thanks in advance for your recommendations.

@shldr2thewheel, you are correct, I accidently typed an extra ".1". The version is 6.1 (10B141). Thanks for the post-spellcheck.

HT4972 wifi not working after upgrade to iOS 5.1.1

Upgraded to iOS 5.1.1 and wifi is not being recognised. In the settings>General> wifi is greyed out and says no wifi. I know it is nothing to do with my home network as no other network in the area is showing up either. Other than restoring is there any other 'fix'. I have seen similar complaints from others. Is apple doing anything about it? Grateful for any solution, it is driving me crazy.

I HAVE FOUND A FIX FOR THIS PROBLEM AND HOPE IT WORKS FOR ALL OF YOU
fix wifi for iphone 4s running on ios 5.1.1(USING WINDOWS COMPUTER)
STEP 1 : CREATE AN AD-HOC NETWORK IN YOUR COMPUTER... GO TO THIS LINK http://windows.microsoft.com/en-US/windows-vista/Set-up-a-computer-to-computer-a d-hoc-network
STEP 2: ASSIGN A NAME AND MARK SECURITY AS NONE ,BECAUSE WE NEED A OPEN AD-HOC NETWORK
STEP 3: SWITCH ON WIFI IN YOUR IPHONE 4S(i dont know if this works for iphone 4/3gs/3g)
STEP 4: TAP ON OTHER
STEP 5 :TYPE THE NAME OF THE AD HOC NETWORK WHICH YOU ASSIGNED AND CLICK CONNECT
STEP 6: IT WILL SHOW FAILED TO JOIN AT THE TOP,OR SOMETIMES IT WILL SHOW FAILED TO JOIN THE NETWORK (name)
STEP 7: REPEAT THIS STEP TWO TO THREE TIMES AND TO THREE TIMES AND YOU SHOULD SEE THAT YOU ARE CONNECTED TO YOUR AD HOC NETWORK
STEP 8 : AFTER THIS DISCONNECT AD HOC NETWORK FROM YOUR WINDOWS COMPUTER AND THEN SCAN FOR OTHER NETWORKS ON YOUR IPHONE 4S .......VOLA!!!!!...ALL NETWORKS NOW POP UP...!!!
GUYS PLZZ TRY THIS ON YOUR IPHONE 3GS/4/3G...AND LET ME KNOW IF THIS WORKS!!!

Wifi not working after upgrading to mountain lion

As soon as I updated my MacBook Pro from Snow Leapord to Mountain Lion. My wifi doesn't turn ON. It says WIFI "No hardware found".

Yesterday evening I had the same problem. The sound was stuttering a while, and then it was not possible to adjust the volume settings with the keys. Also my computer (laptop MBpro 2009) was slow as ****, when I tried to open the sound preferences.
Even a reboot didn't help, as setting the audio midi settings. The results where terrible.
Just many hours later I was able to solve this problem. I used a program called ICECLEAN.
I checked/Cleaned the preferences files for the SYSTEM and USER.
still no results.
After that I did a full CLEAN USER AND SYSTEM CACHE.
Reboot the machine and then everything worked correctly.
thanks APPLE!

HT4623 wifi not working after upgrading ro ioz 7

after updating my ipad via wifi, to ios 7 my network connection doesnt work. it s_hows as if it ia connected to wifi, but norhing works. i cant access anyrhing bia the internet. pla hwlp

Issue seems to be resolved

IPhone 4's WIFI has been not working after upgraded to 6.1.3(10B329)

     My IPhone 4 was working fine with its WIFI when it is running in default IOS version, I believe it was 5.x.x version, however after I upgraded to 6.1.3(10B329) then WIFI got very aweired issues again and again.starting from then I never get my WIFI working again:
1. Sometimes I can connect to my home's network and keep alive for 1-2 minutes then WIFI will not work on IPone, my home's router is not working either, I need to restart my home's router manually;
2. I can connect to my office's network and keep alive 5-10 minutes then WIFI is not working, however my office router is not affected; however the following days then I can't connect WIFI to office's network any more.
3. I tried to connect to other public area's free network via WIFI, however never joined in.
     I called Apple's service centre couple of times they have no clues, they said they never met this problem before for WIFI not working after upgraded to IOS 6.1.3 and no suggestions from them at all, every time I called them they gave me the same suggestion, such as restore-re-install, check your own router etc, nothing help, however my friend bought a brand new IPhone 4 with default IOS version 6.1.3 which is working perfectly without any issues on its WIFI then I believe this is a completely software issue.
     I know this is a general issue for Apple users and I refuse to upgrade to higher version as I am not sure the higher version can fix this issue however I am pretty sure the newer version of IOS did bring a lot of new bugs, anyone can provide me any suggestions guys ? THANKS A LOTTTTTTTT!!!!!!!!!!!!!!!!
Terrence

I have fixed this issue after upgraded my router's firmware finally, this is a completely compatibility issue between Apple and other third party manufactures, hopefully we can get compabitlity list for each future IOS version ahead of time which can potentially avoid such kind of embarrassing situations moving forward, thanks !

Personal hotspot not working after upgrading to ios7

Personal hotspot not working after upgrading to ios7

I was having this problem (iphone 5 wouldn't work as hotspot for my PC laptop) and had tried everything suggested on these message boards, so I finally went to the Apple Genius Bar and they fixed it for me. Here's what they did:
1) Turned the Hotspot off on my iphone
2) Went to the Control Panel on my laptop to "Network and Internet" > "Network and Sharing Center" > "Manage Wireless Networks" (on the left navigation panel) and deleted my iphone from the list of WiFi connections I've attempted.
3) Flipped the manual WiFi switch on my laptop to Off and then back On again (to reset it)
4) Turned the Hotspot on my iphone back on
After that, when I tried to connect, it worked. Hope this works for someone else.

Wi-Fi not working after upgrading to 3.0

Has anyone experienced their Wi-Fi not working after upgrading to 3.0? It has happened to me on my home network. I know the internet connection is good because I can successfully connect via my Mac. When I turn off the Wi-Fi and use AT&T, I can connect to the internet. I go back to Wi-Fi and no connection.
Any suggestions would be appreciated.

Hi There,
Yep I can confirm that I am having problems with wifi as well.
My problem is that it is not re-joining known networks.
Also the auto login feature designed for hotspots does not seem to work well either. The Log In Screen slides up then an error keeps repeating on the page...."Error Opening Page - The page could not be opened because an error occurred"

Iphone 4 Home button not working after upgrade to OS 4.3.5

Iphone 4 Home button not working after upgrade to OS 4.3.5.Please help!!!!!!!!

It seems that settings of mail accounts have something to do with it. I've delete my gmail account and am now using Microsoft Exchange. It seems better, yet not perfect. The issue is definitely due to OS 4.3.1
Apple answer is - no answer. It is a shame that the quality of their products, in terms of design and concept, is not match by a care for customers. It is not normal that I, as a customer, have to spend hours reading Apple Discussions forum to try to understand what the problem is. A little more respect for a customer that spend big $$$ buying their products wouldn't hurt.

File- Export not working after upgrade from 11i to R12

Hi,
File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
Thanks and Regards,
Jagadeesha

Enabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
In Argument 1 - Type: String Value: global.frd_debug
Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
In Argument 0 - Type: Integer Value: 196613
In Argument 1 - Type: Number Value: 54
Out Argument 0 - Type: String Value: 12
Executing COPY Built-in:
In Argument 0 - Type: String Value: Entering app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing FIND_MENU_ITEM Built-in:
In Argument 0 - Type: String Value: FILE.EXPORT
Out Argument 0 - Type: Integer Value: 19
Executing GET_MENU_ITEM_PROPERTY Built-in:
In Argument 0 - Type: Integer Value: 19
In Argument 1 - Type: Number Value: 79
Out Argument 0 - Type: String Value: TRUE
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing COPY Built-in:
In Argument 0 - Type: String Value: NULL
In Argument 1 - Type: String Value: GLOBAL.OUT
Executing USER_EXIT Built-in:
In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.OUT
Out Argument 0 - Type: String Value: N
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing GET_APPLICATION_PROPERTY Built-in:
In Argument 0 - Type: Number Value: 75
Out Argument 0 - Type: String Value: IHR40P
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
# 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
# 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3

Ipohone 4 hotspot not working after upgrading to ios7.1 ?

my ipohone 4 hotspot not working after upgrading to ios7.1 but my some friends having iphone 4s its works fine and those having iphone 4 it's not working although we all have same operator and same operating system (i.e ios 7.1).I think this is problem only with iphone 4 users with ios 7.1 , so apple plz fix it in ur next update.

You don't like the answer?
Again it's not a bug, use a supported carrier if you want Personal Hotspot.
Read the list one more time, if carrier is not on the list, IOS7.1 patch the loophole.
Message was edited by: ckuan

Web Service is not working after Upgrade SAP EHP6

Hi ,
Recently we upgraded SAP ECC 6.0 to EHP 6.
We have a custom web service which is consumed in .NET Application to get the Sold To from Sales Order.
the service is working perfectly before upgrade and it is not working after upgrade to EHP6.
When I tested the Service in WS Navigator in SAP, it is working fine.
We raised a message to SAP and SAP analyze the Traces and confirm that the HTTP Request Header coming from .NET application is not having User ID and Password , so it is throwing exception from SAP as unauthorized.
But in service it is configuration as basic authentication and log on using user id and password and .NET application is calling service by passing user ID & Password.
Customer is not happy as it is working before Upgrade and SAP confirmed every thing fine in SAP, but the service is not working.
we did the below steps.
Regenerated the configuration
Re imported the Certificates
Activated the service in SICF.
Please let me know if anybody have same problem or if any steps we are missing.
thanks.
Uma

after changing the .NET Application , Service is working fine.

Win 7 Wifi not working after upgrading to 10.9.4

Similar Messages

Maybe you are looking for