Win 7 x64 LJ2100tn network install

I could use some new ideas about installing a Laserjet 2100tn through a network with a Linksys wrt54GS router. Printer works fine on network through XP, with 3 desktops, 1 laptop and 1 netbook. Tried the HP network diagnostic through XP and it can't find the printer - used Ping and telnet to i.p. address and they can't find it either - but printer WORKS fine. Looks like the printer currently runs under IPX.
In Win 7 x64 I tried all the new drivers from HP, and installation for PCL 5, 6 and PS but the printer installation routines can't find the printer. Deleted and re-installed about a billion times (roughly) in the last week. Updated router firmware, and drivers for motherboard and ethernet connection.
I won't switch to Win 7 until I work out some fix for this.
Thanks to all that can send suggestions.
Duff2424

Try accessing the embedded web server by typing the IP address of the printer in a browser on the PCs. Maybe a firewall on the PC is interfering with the HP software finding the printer and with ping. You could also try temporarily turning off any/all firewall software running on the Win 7 PC to see if this might be the problem.
You could also try HP's free Webjet Admin software to see if it helps with finding the printer or diagnosing the problem.
http://h20338.www2.hp.com/Hpsub/cache/332262-0-0-225-121.html
Also, a few notes for what they are worth:
1) Window 7 doesn't support IPX (so if you are really trying to use IPX and not using additional software to provide IPX support on the PC, that could be a problem). But the standard TCP port for HP printers is 9100, the software should be trying to send PCL to port 9100 (when it can find the printer). I believe the network implementation in this printer does support IPX and so it could very well be what the XP PCs were set up to use.
2) This printer uses a JetDirect card for networking. The network diagnostic that I think you are referring to was designed for inkjet printers which use a different networking implementation (mostly the same functionality but different implementation), so this diagnostic might have some troubles working with this printer.
Hope something here is helpful.
-David
(I'm an HP employee, but I am speaking just for myself and not HP.)

Similar Messages

HT2292 I am using win vista and have installed itunes for my ipod shuffle four years back. now I have purchased iphone 4, and trying to reinstall itunes after uninstalling my earlier itunes i always get a message that error in installation. kindly help

I am using win vista and have installed itunes for my ipod shuffle four years back. now I have purchased iphone 4, and trying to reinstall itunes after uninstalling my earlier itunes i always get a message that error in installation. kindly help

You might find this article helpful: http://support.apple.com/kb/TS3694
It has the error range of 3000's which states
Errors 3000-3999 (3002, 3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the gs.apple.com server on ports 80 or 443. This may be because out-of-date or incorrectly configured security or firewall software is interfering, an old version of iTunes is installed, an entry in your hosts file redirecting requests to gs.apple.com (see error 1004 above), or because of your Internet proxy settings. If you are using a proxy, try without using one or with a known-good network. If that does not resolve the issue, follow iTunes for Windows: Troubleshooting security software issues. Error 3014 may indicate that you need to free up more disk space on the computer before trying to restore again. Error 3194 most likely indicates you do not have the latest version of iTunes installed Update to the latest version of iTunes.

JAVA_HOME space win x64

Okay the problem is famous : on win x64 java is not recognized if set JAVA_HOME = C:\Program Files\1\Java\jdk1.8.0_25 neither if set JAVA_HOME ="C:\Program Files\Java\jdk1.8.0_25" and neither JAVA_HOME ="C:\Progra~1\Java\jdk1.8.0_25" despite a tons of web pages that indicate to use this last setting (Maven: tricky JAVA_HOME setting | Xinotes ) .
Then what is the solutions ? maybe the unique solution is to install java in a folder without space ?

If you are suggesting that when you type "java" at the command line it doesn't work regardless of how you set JAVA_HOME then the solution to that is simple (and true for all versions of windows)...use the environment variable "PATH" instead.
You can use JAVA_HOME from a 3rd party app that wants the location of a java VM. (There are problems with that for serious applications because they would not normally run with any arbitrary VM but only the ones they are tested for.)

GoldenGate for Big Data 12c for Win x64?

I was looking for the GoldenGate for Big Data download for Win x64 and all I found on edelivery was Linux, Solaris, HP-UX and AIX platforms, but no Windows at all (see the screenshot below). I wonder if it's been released yet? Or, is it just an unfortunate omission?
Thanks
Andy

Thanks, for your reply, Karan!
I tried following your advice, but bumped into yet another similar problem. I've installed OGG 12c and now I can't seem to be able to find the matching version of the GG Application Adapters for JMS and Flat File for the Win x64 platform. The latest version of Application Adapter available on edelivery is 11.1.1.0.0 which means I need to downgrade OGG to the same version. No big deal but I wanted to make sure I'm not missing anything.
I wonder if anybody has any idea as to whether Application Adapters 12c for JMS and Flat File is available for the Win x64 platform, and if so, where can I download it from?
Thanks
Andy

Z77 MPower RAID 0 (2SSD) Win 7 can't Install

Z77 MPower RAID 0 (2SSD) Win 7 x64 can't Install.
Created in the bios util the Raid0, both are connected to the SATA3 ports, one is a Vertex 3 and the other a Vertex 4, both 128GB.
Windows starts install from DVD, let me choose the unit (the RAID one made with the two SSD), but when I try to continue It tells me the cant create system partition.
I tried loading the driver for rapid storage from a pendrive, the driver seems to load ok in the install, but the same result.

Quote from: xmad on 02-July-13, 04:36:58
Remove all other hard drives and re-try. If one of those other disks is a dynamic disk it will fail.
Then re-format and re-try.
Goood, one of the other discs is Dynamic!, let me see if it works with only the raid plugged in.

New computer win 8.1 pro, installed my creative Suite 4 Design premium but it shuts down when I try to use any of the programs and gives me an error code 147:20. How can I fix this?

New computer win 8.1 pro, installed my creative Suite 4 Design premium but it shuts down when I try to use any of the programs and gives me an error code 147:20. How can I fix this? Is this a conflict with win 8.1 pro?

You need to adjust your security stuff/ permissions and possibly use compatibility modes. It means that your licensing service is being blocked/ shut down.
Mylenium

Help Lenovo Y50-70 Win 8.1 clean install

I'm new to Lenovo, Win 8 and to this forum. I'm considering buying Lenovo Y50-70 Notebook model 59441814 - Intel Core i7 4270HQ, 8GB DDR3L, 256GB SSD, NVIDIA GTX 860M 4GB, 15.6" Touchscreen, 4K UHD, USB 3.0, no DVD drive and Win 8.1 pre-installed. I also have retail MS Win 8.1 Pro "Full Version" 64 bit DVD and key. Would like to upon receipt of latptop to: (1) replace 256GB SSD with a Crucial MX200 500GB SATA 6Gb/s 2.5" SSD, and (2) do a complete clean install using my retail 8.1. Reasons are: increased capacity and get rid of all the unnecessary stuff that Lenovo pre-installs. Since I don't have a DVD drive and I have read there are some issues with boot secure, can someone provide recommendation on sequence of steps to follow. and /or how to.
Solved!
Go to Solution.

hi Forest1,
Welcome to the Forums.
When you receive the Y50-70, can you try these steps:
1. Follow this video disassembly guide on how to replace the HDD with an SSD. Alternatively, you can also watch this youtube video on how to replace the drive.
2. If you're planning to install Windows 8.1 Pro in UEFI mode, follow this guide on how to convert the DVD installer into a USB installer. When finished, boot into the BIOS and set the following settings then hit F10 to save and exit.
- Link to picture
Secure Boot = Disabled
USB Boot = Enabled
OS Optimized Defaults = Other OS
When finished, boot from the USB flashdrive that you created (by tapping F12 and selecting the flashdrive on the boot manager) and you should be able to install Windows 8.1 Pro on the SSD.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Acrobat 9.0 Network install not removing reader or supressing license

I am running a network install created by the customization wizard of Acrobat 9. In the wizard I told it to remove all versions of reader and Acrobat and suppress the user agreement. The program installs but users have to agree ULA, and reader 7 is still there and default.
It seems as though the MST is not being read during the install process. I have checked the setup.ini and it is pointing at the correct MST file. I have also used this same install in other remote offices without issue.
Any Ideas?

Are you installing the package directly from the .msi file? If so, you'll need to specify your custom transforms by using the transforms property. For example,
msiexec /i AcroRead.msi transforms=AcroRead.mst /qb

How to network install latest firefox with custom home page

I'm trying to figure out how to do a network install with the latest firefox, but customized to have the default home page setup for the companies intranet web portal. I have several thousand computers that need the installation and pushing via network is the only realistic method, but I can't find a solution on how to change the home page for this. Please help!

See:
*http://mike.kaply.com/2012/08/29/setting-the-default-firefox-homepage-with-autoconfig/
* https://addons.mozilla.org/firefox/addon/cck/

Include all updates for Office 2010 PP during custom network install

Hello...
I'm currently doing a custom network install of Office 2010 Professional Plus 32bit edition. The custom install is working fine with the MSP file in the \Updates folder.
I would now like to add all of the current updates, hotfixes, and service packs to the \Update folder so that Office 2010 is completely up-to-date when being deployed. I understand that I need to put the MSP files for these updates, hotfixes, and service
packs in the \Updates folder.
A couple questions:
1 - Is there one place that I can download all of the Office 2010 PP 32bit edition updates, hotfixes, and service packs... Excluding any 64bit edition updates? A repository of some sort?
2 - I'm assuming that if the hotfixes, and updates are downloaded as .CAB, I first need to extract it, get the .MSP file and put that into the \Updates folder?
3 - I think Service Packs come down as .exe's??!! If so, do I just put the .exe files in the \Update folder as well or do I need to run something special to extract them like I do with the .CAB files
I appreciate any help someone can give. If there is a better way to accomplish this, I'm open to all suggestions :)
Thanks... Frank

1. Update Center for Office: http://technet.microsoft.com/en-us/office/ee748587.aspx
2. Yes, we need to get the .MSP file (BTW, the hotfixes are download as .exe file)
3. Yes, we need to get the .MSP file
For your reference:
Using the Updates folder to deploy software updates during an Office 2010 installation
http://blogs.technet.com/b/office_resource_kit/archive/2011/05/05/using-the-updates-folder-to-deploy-software-updates-with-an-office-2010-installation.aspx
Max Meng
TechNet Community Support

Solaris 10 Network Install TFTP problem

Hi,
I tried to create jumpstart through network install with Solaris 10.
I'm running into trouble of TFTP problem when trying to add_install_client.
Here is the error I got:
./add_install_client xxx sun4u
svcprop: Couldn't find object for FMRI "network/tftp/udp6:default/:properties/restarter/st ate".
enabling network/tftp/udp6 service
svcadm: Pattern 'network/tftp/udp6' doesn't match any FMRIs, ignoring
On the client side, when I do "boot net - install", I get ARP/RARP error, obviously, the TFTP was not set up right on the server.
I could not find tftpd on the server, anyone has any suggestion what I should do to get tftpd running?
Thanks!

Hi,
i don't now, why it is like it is, there is no xlm manifest for the smf, but there is a "simple"solution:
edit the /etc/inet/inetd.conf, unremark the line for tftpd. Than, when restarting the inetd with "kill -HUP <prozessnumber of inetd", you get a message in /var/adm/messages:
......... inetd[185]: [ID 702911 daemon.warning] Configuration file /etc/inet/inetd.conf has been modified since inetconv was last run. "inetconv -i /etc/inet/inetd.conf" must be run to apply any changes to the SMF
Just do what it say's: "inetconf -i /etc/inet/inetd.conf", and you get the smf entry:
# svcs | grep tftp
online 19:05:27 svc:/network/tftp/udp6:default
now it is online, and you can stop and start it with svcadm.
Holger

Network Install with wireless

I'm attempting to help a friend install Arch. Network card is BCM4312 (on an ACER laptop), an iwconfig returns with no wireless devices found on lo or eth0, the two interfaces output. We would like to do a network install. The wiki doesn't specify how to deal with iwconfig being unsuccessful; is there anything to do, or should we plug an ethernet cable in and install, then configure wireless with drivers post install (and would that work)?

sorry, yeah setting up the wireless once the initial install is done shouldn't be a problem. I believe my old laptop had the same wireless card, and it wasn't hard to setup at all, i just followed the wireless wiki. I usually wait to setup the wireless until after the base install.
Last edited by evr (2009-04-18 01:30:37)

I need help with network install of SQL Developer 3.2

All,
Does anyone have any references on how to perform a network install for SQL Developer? Here is what I'm trying to achieve:
1. Network installation on drive S:\ (Windows, obviously)
2. User links to network installation
3. Connections are unique for each user
I found the 2006 posting of network install for Raptor, but I could not find anything that correlates with the latest release. All I have done so far is downloaded and unzipped. Any help/instructions/guides/tutorials are welcome.

You have installed!. The code for SQLDeveloper does not have an installer.
If the software is on S, say a shared drive, each user will start sqldeveloper and a directory called sqldeveloper will be created in their local %APPLICATION_DATA% folder. This will keep all connections etc unique for all users.
You will have to create a link from the S drive to the sqldeveloper.exe if you want a shortcut to start it. We dont provide it.
Thanks
B

Network Install stuck at apple gray screen

Hi,
I set up 1 IMac and make a network install image of it by booting the IMac as target mode, then run system image utility to create the network install.
Then i turn on netboot and i tried to boot the other IMac that connected to the network via netboot so it'll be installed and configured as the initial IMac. However it stuck at the grey screen for 30 minutes.
Am I doing something wrong?
Any help is greatly appreciated!
Thanks,
Sumomo

Sounds like the issue we're having over in the System Imaging forum
http://discussions.apple.com/thread.jspa?threadID=929625&tstart=0
there's a solution that seems to work for most people and that's to manually copy CoreVideo.framework in to the image. Details under the link.

Bootcamp Win Server 2008 x64 - No network

I have no networking either wired or wireless with Bootcamp and Windows Server 2008 x64.
I've repaired the drivers from the bootcamp partition on the OSX disk - no change, and uninstalled the device drivers for the ethernet controllers and the Broadcom Wireless 802.11n device in Device Manager, rebooted, windows wasn't able to install the drivers.
Does anyone know where I can download the x64 drivers, for the Broadcom Wireless 802.11n
Both the wired and wireless work Ok under OSX with all updates installed.
Any help would be greatly appreciated.
Thanks
Syl
MacPro 2 x 2.93GHz Quad-Core Intel Xeon
AirPort Extreme Wi-Fi Card-INT

I had the same problem but I came up with a solution. Since I was following some instructions on using Win server 2008 as a workstation I saw that it mentioned downloading Everest Ultimate Edition (trial version worked) to find out what the hard ware was that needed a driver. When I did this I saw that the network device was listed as a Intel 82574L. After finding the name of the hardware I went to "computer management" and clicked on "device manager." From there I double clicked on the network device, clicked on the reinstall driver; from there browse for driver software & let me pick from a list. Select network adapters - intel - and then on the Intel 82574L. Once it installed the network came right up. Hope that helps you out & good luck!

Win 7 x64 LJ2100tn network install

Similar Messages

Maybe you are looking for