Win 7 x64 & PSE?

My faithful PC chewed up it's system board/processor. The good news is that the HD seems untouched. My stored pictures are all there!!! But my system is now Windows 7 X64, It seems clear that my PSE 3.0 is not going to function in a Win 7 environment. My choices seem to be PSE Vers. 7, 8, or 9. I have stayed with PSE 3 because it perfomed well in manipulating photos and I had not found a task that I could not do using PSE 3. My limitations, not the programs. So now I am faced with upgrading and the 3 versions I listed seem to be available on the web. Given what might be a limited task set (If I could do in in PSE 3, I want to do it in the replacment,) are there any advantages to any of versions I have listed? Will they all run on Windows 7 X64 or what is the first version that does run on a 64 bit system.
Thanks in advance for any help you can provide.
John G.

jhg_2 wrote:
My faithful PC chewed up it's system board/processor. The good news is that the HD seems untouched. My stored pictures are all there!!!
Wait! Don't you have backups??? You are living dangerously, my friend. From this point forward, you need to make regular backups of your photos and catalog file.
But my system is now Windows 7 X64, It seems clear that my PSE 3.0 is not going to function in a Win 7 environment. My choices seem to be PSE Vers. 7, 8, or 9. I have stayed with PSE 3 because it perfomed well in manipulating photos and I had not found a task that I could not do using PSE 3. My limitations, not the programs. So now I am faced with upgrading and the 3 versions I listed seem to be available on the web. Given what might be a limited task set (If I could do in in PSE 3, I want to do it in the replacment,) are there any advantages to any of versions I have listed? Will they all run on Windows 7 X64 or what is the first version that does run on a 64 bit system
They all run on Windows 7 64-bit. I doubt that any of them fail to do things that PSE3 can do.

Similar Messages

JAVA_HOME space win x64

Okay the problem is famous : on win x64 java is not recognized if set JAVA_HOME = C:\Program Files\1\Java\jdk1.8.0_25 neither if set JAVA_HOME ="C:\Program Files\Java\jdk1.8.0_25" and neither JAVA_HOME ="C:\Progra~1\Java\jdk1.8.0_25" despite a tons of web pages that indicate to use this last setting (Maven: tricky JAVA_HOME setting | Xinotes ) .
Then what is the solutions ? maybe the unique solution is to install java in a folder without space ?

If you are suggesting that when you type "java" at the command line it doesn't work regardless of how you set JAVA_HOME then the solution to that is simple (and true for all versions of windows)...use the environment variable "PATH" instead.
You can use JAVA_HOME from a 3rd party app that wants the location of a java VM. (There are problems with that for serious applications because they would not normally run with any arbitrary VM but only the ones they are tested for.)

GoldenGate for Big Data 12c for Win x64?

I was looking for the GoldenGate for Big Data download for Win x64 and all I found on edelivery was Linux, Solaris, HP-UX and AIX platforms, but no Windows at all (see the screenshot below). I wonder if it's been released yet? Or, is it just an unfortunate omission?
Thanks
Andy

Thanks, for your reply, Karan!
I tried following your advice, but bumped into yet another similar problem. I've installed OGG 12c and now I can't seem to be able to find the matching version of the GG Application Adapters for JMS and Flat File for the Win x64 platform. The latest version of Application Adapter available on edelivery is 11.1.1.0.0 which means I need to downgrade OGG to the same version. No big deal but I wanted to make sure I'm not missing anything.
I wonder if anybody has any idea as to whether Application Adapters 12c for JMS and Flat File is available for the Win x64 platform, and if so, where can I download it from?
Thanks
Andy

How can I do a manual install of ACR 7.4 in 64-bit Win 7 PSE 11?

I found detailed instructions on this forum that I think were for 32-bit Win 7 but I'm hoping 64-bit install is different since I followed them and still no success. I know that 8.1 is supposed to be able to be manually installed and that would be ok too but I really only need to go from 7.1 to 7.4 and the update function is greyed out. I started with a trial version on that machine so maybe that has something to do with it? It is registered and activated. Tried to uninstall/re-install and still no luck(didn't check the "de-activate" though so maybe I need to try again and choose this?
Not afraid to try a manual install if it is in fact different.
This is the thread I followed - http://forums.adobe.com/thread/1266134
I have the PSE 11 on a Mac platform also and was able to update it no problem...can't get the Win 7 to work for the life of me.
Thanks for any responses.

Glad it worked.
There is one more thing you should install and those are the camera raw profiles for 8.1
Download the 8.1 DNG Converter and run the installer to install the camera raw profiles.
(those profiles would normally be installed if the updater in your pse 11 was working)
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5597

Converting PSE Win to PSE Mac with saved keywords

Tried several times for three years to go from PSE Win 6 to 9, then to PSE 9 Mac. At that time intstructions used to say to save keyword tags to slide files before backup, then restore on Mac. Could never get this to restore on Mac. Has this been solved with later versions?

Thanks so much. I think I did this all right, because at least one of the times an Adobe tech did it from scratch logged in to my computer. (It is a Mac with Parallels/Windows, and PSE 6 and 9 on that, so all versions actually on one box) And the Mac PSE 9 is on the Mac. The Adobe instructions a while back said to do a save keyword tags to slide files first, then backup, then move to the Mac and restore.
So just so I am clear finally, are you saying I don't have to do this save tags process first? In which version? And my keywords will come with the catalog? Is this due to some software upgrade? I didn't see anything in a recent search.
Thanks once again. My new years resolution (before new years) is to be able to one again use this. All my slides, all my keywords.

975X Internet connection problems Win X64

Hi, I have upgraded my OS from Win XP Prof to Win XP Prof X64. With the old OS I had no problems connecting to the internet. Now I cannot connect. I had downloaded the 64bit drivers from http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=746&kind=1 but there is no installer, and I don't know how to do it manually. Could someone give me step by step instructions please? Tech support will only tell me to do it manually but they won't tell me how. Thank you, Dave

hello welcome to forum.
download(http://download.msi.com.tw/support/dvr_exe/mbd_dvr/intel_Gigabit-64bit.zip) and extract drivers from archive.
go into device manager(right click on "my computer", select "properties", choice "hardware" tab, "device manager", navigate to unknown devices(device with yellow question mark, right click on it and choice update driver, then select "install from a list or specific location(Advanced), click "next", an choice from there "don't search. i will choice drivers to install", click next, and click on "have a disk" and point to files(drivers) where they are extracted.

Audigy 2 on Win x64 . NOT FOUND!!

Hi
I have an Audigy 2 and it works fine on Win XP Pro.
However when I want to install latest drivers on Win XP x64, setup says it can't find the card. lol
What's wrong or what am I doing wrong?
I have latest NForce drivers and latest bios. MB: MSI K8N Neo4 Platinum. 2 Gb 3200 DDR Kingston (4x52), GForce FX660 256 Mb.
Could anyone help me, please?
Thanks

D/L this driver http://www.station-drivers.com/telec...32-64-whql.exe
Open it up with WinRar and then go to WDM/common and 64.
Extract this to your desktop and then try to force it in Dev Man.
IF that fails then open up again and go to surrport/64 and use the CTzapxx.
Hope that hel
ps.
Message Edited by xmn on 09-07-2005 0:56 AM

WIN/Vista, PSE 7.0: Organizer problems with dates

Im working with our scanned photos now, so there is no EXIF data and the only dates are the scanned date and any later corrections in Photoshop CS3 before or after importing into PSE 7.0. I now have two date related problems that I didnt have with PE 5.0.
1) In the Organizer view, when I right click on the date to bring up the Adjust Date and Time screen, then click on Change to a specified date and time and click OK the day automatically changes to a day earlier, which has caused much confusion since all I am wanting to do is set a time to sequence photos from multiple cameras. How do I keep it from automatically changing the date?
2) Also, Ive had multiple times that Ive changed the date on a couple of photos and PSE 7 will place them incorrectly so that they are non-chronological. Specifically I now have two photos from a string of many on Dec 24 & 25, and some on Dec 26 and after. These two photos belong on Dec 26 chronologically, as well as where they fit in my file naming system. If I change the date on these to 12/26/1976, though, they are placed in my 12/25/1976 photos, not 12/26 where they should be. I have another photo dated 1/17/1977 that PSE has placed between 1/16 and 1/9/1977.
I thought these were quirky enough that I actually removed and reinstalled PSE 7.0, but these issues are unchanged.
FYI: Settings in Edit>Preferences:
General/Display Options/Date (Newest First): Show Newest First within Each Day is selected
Files/File Options: Use Last Modified Date if EXIF . . . is unchecked.

> In the Organizer view, when I right click on the date to bring up the "Adjust Date and Time" screen, then click on "Change to a specified date and time" and click "OK" the day automatically changes to a day earlier, which has caused much confusion since all I am wanting to do is set a time to sequence photos from multiple cameras. How do I keep it from automatically changing the date?
When a photo has a date but unknown time, PSE 6 and 7 (and perhaps 5 too) behave this way. Its a bug thats been reported to Adobe.
> 2) Also, I've had multiple times that I've changed the date on a couple of photos and PSE 7 will place them incorrectly so that they are non-chronological. Specifically I now have two photos from a string of many on Dec 24 & 25, and some on Dec 26 and after. These two photos belong on Dec 26 chronologically, as well as where they fit in my file naming system. If I change the date on these to 12/26/1976, though, they are placed in my 12/25/1976 photos, not 12/26 where they should be. I have another photo dated 1/17/1977 that PSE has placed between 1/16 and 1/9/1977.
When this happens, which view are you in? Display > Thumbnail View or Display > Folder Location view? Is this using Smart Albums to search by date? If this is still happening, can you upload a screen shot, the incorrect 12/26/1976 photo, and the adjacent 12/25/1976 photo? You can post these for free at www.pixentral.com. Ill take a look at their metadata.
There are a number of problems with time unknown, so Ive stopped using it:
http://www.adobeforums.com/webx?128@@.59b6aaa0
In particular:
- Search with date ranges doesnt properly handle time unknown.
- Other tools, such as Vista Explorer, dont correctly handle dates with time unknown in metadata written by PSE.
- If you have a series of slides youve scanned, you know their relative time ordering (due to the slide numbering) but not their absolute time. Theres no convenient way of preserving that ordering within PSE thumbnail view if you use time unknown.
So instead of unknown, I assign the times 12:00 AM, 12:05 AM, 12:10 AM, etc. (leaving gaps in case I need to insert another scan later).

Wine x64 - odd xorg errors

i'm getting real odd 'glxbaddrawable' errors from trying to launch simcity 4 under 32 bit wine in x86_64 arch; odd in a quite litteral sense: it only seems to happen 'every other time'.
i'll get the crash on an 'glxbadrawable' error only about half or a third of the time; the rest of the time the game launches fine. which leaves me really puzzled as to where to start debugging this. i've tried different combinations of using built-in or native d3d wine libraries; and i've tried under different ati drivers / xorg-server's .. etc..
it's just annoying to have to try and launch it two or three times every time..
any ideas ???
(ill gather the outputs and attach em to this post in a short while)

yes im using it software mode ...
in fact, i've been trying to run the sims 3 as well, which is also supposed to work find, and i'm getting the exact same errors. ive read all about the different registery tips and tricks and none seem to have any effect on that.
i've also come to the conclusion that i can't seem to be able to run direct 3d at all on my system. if i used hardware acceleration in simcity for instance, i get about 5 frames per second on everything ... with the sims 3, when it does launch (again, roughly 25 percent of the time...), it just stalls there as soon as it tries to render the EA logo after which it dies a painful death some moments later...
even worse, i recently can't even seem to get anything to start at all ... i get a bunch of fixme: and err: messages about d3d and wined3d and after a while i get this " err:seh:setup_exception_record stack overflow XXX bytes in thread XXX" errors and eveyrthing dies ...

IDCS5 Win X64

I am compiling my first CS5 plugin (this is a CS4 project upgrade) and am receiving some errors/warnings that I cannot seem to resolve. Here they are:
Could Not Find C:\Program Files\Adobe\Adobe InDesign CS5 Debug\Plug-Ins\(WPCPrintDebug Resources)\*.idrc
I checked the Pre-Link Event command line, and it looked almost exactly that found in the porting guide on page 13; the only difference was "&del" instead of "& del." Just to be sure, I changed the line to exactly match the guide, reran the compile, but that did not fix the problem.
BTW, the directory does exist, but it is empty.
..\objD\WPCPrintUI\PlugInStatics.obj : fatal error LNK1112: module machine type 'x64' conflicts with target machine type 'X86'
I've looked all over the project for anything that even remotely looks like an X64 checkbox and haven't found any. I went into the VCPROJ file, found several references to x64 and removed the whole XML tag. That doesn't seem to have hurt the project any, but I still get these errors. What is an IDRC file and how do I generate it?
And how do I turn off X64 in my project?
(For those of you who wish to gently chastise me for removing X64 specifications from the project, please remember that x64 is only valid for InDesign Server and we do not use InDesign Server and have no plans for using it in the future.)

Update: The problem with the .idrc files has been resolved. There seemed to be a pathing issue within Visual Studio 8; once I got that cleared up, the merge_res cmd file worked. I still need whatever wisdom the group can share with me, however, about the X64 problem.

Win X64 and Dreamweaver

I am just curious to see if I am the only one running X64. I
could not get the 8.0.2 update to take and after searching the
forums here, I am convinced that it is my operating sytem. I do no
have any problems running any programs but the update. Photoshop,
Illustrator, Indesign, Dreamweaver, Fireworks and all my MS
applications work great. Just the updater for DW 8.0.2 is the only
problem.

Say Andrew,
You claim that Adobe completely ignore x64 support. It is all
rant, misleading and inaccurate.
I am pretty darn sure that Adobe system developers and
engineers are well aware of this issue. Perhaps that you need to be
either patience for next release or make some constructive,
professional and netural feedback about X64 support. Ideally, it is
a good time for you to address this issue around CS3 products
development currently under development and being engineered for
next release.
I'd be honest with you, I don't know what is going to happen
between now and for next few months, what is going to happen if CS3
supports X64 platform/architecture, perhaps for sure in time by CS4
(perhaps other 18 months plus the pre-CS3 release few months from
now)...
It is fair for me to say that, however, it will be benefit to
all of us and Adobe system engineers if you address this issue by
send feedback email. For now, and until then, sit tight and be
patient, I guess.
Happy Holidays, DWD
quote:
Originally posted by:
virnuls
Yes, I'm running Windows XP x64! I can't run the updater,
either - 8.0.1 was fine, but 8.0.2 says that it was interrupted
when it wasn't, and never has been.
Oh, and Flashpaper doesn't work, either.
Adobe/Macromedia seem to have almost completely ignored x64,
whereas I've got drivers for all my hardware and everything else
works happily - do a search for almost any term and "x64" and this
site, though, and there are no results found.
Andrew

Z77A-G43 (MS-7758) problem with Win x64 install

Hello,
Motherboard is Z77A-G43 (MS-7758) latest bios v2.7.
I would like to install Windows x64 on 3TB GPT disk.
In accordance with the product description "3TB+ Infinity is not only breaking through the limit of traditional BIOS, but also enhancing the utilization of hard drives efficiently. In addition to supporting the latest 3TB hard drives, MSI 3TB+ Infinity technology can use the 3TB hard drive as boot disk when installing a 64-bit operating system. Compared to competitors, MSI 3TB+ Infinity is an industry-leading technology which substantially presents an advantage of development and application in the future."
HDD is ST3000VX000-9YW166 connected as SATA AHCI. The device is recognized by the bios.
To make sure that I use EFI, I boot with EFI shell and run BOOTx64.EFI from Windows install disk. I select the ST disk. It has one system partition of size about 128mg, the rest of the disk is unallocated. When I attempt to install Windows on the ST disk, I get the message "Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure the disk's controller is enabled in the computer's BIOS menu."
What should I do to make Windows install on this disk?
Thanks.

Quote from: Bas on 03-November-12, 03:04:53
Did you turn Infinity on?
I believe Infinity is always on. At least I don't see such an option in bios.

Win x64 K8N Neo4 SLI--How do I uninstall Nvidia Network Access Manager?

I'm trying to get completely out of the Nvidia firewall I made the mistake of installing. I uninstalled all Nvidia drivers, but control program/add-delete programs shows a Nvidia Network Access Manager and a Nvidia Mixer. Clicking on remove does nothing. Just ignores me. I turned off virus, Windows Firewall, closed all programs but I can't get rid of the dumb thing.
Anybody figure out how to do it?

Ctl Program/Add remove programs & going to Uninstall Nvidia drivers gives the option to uninstall components, but either checking all or just the ethernet componenet still leaves Nvidia Network Access Manager remaining. Clicking on uninstall does nothing; apparently there's no way to get rid of it
Regards, Ron

SATA RAID problem on K8N Neo2 Platinum (nForce3 ultra) & winXP x64

I entered on MSI driver dowload page, put my model, and i found out that the RAID driver for win x64 wasn't released (nforce3 ultra), but in the same page was the driver for the nforce4, so I supposed it was compatible. I made the driver disk. press F6 and he askme for the drivers, ok, i introduce BOTH drivers, he detects perefctly the SATA RAID (stripping) format the disk, copy the files and ask me for some .CATof teh raid driver that wasn't on the zip file.... omit files, reboots, completes the instalation, but on the first boot of win x64 when it's just about to show the windows screen, a bue windows, and resets the pc so fast that's unreadable. fail safe start.. same crash.
I Installed win on an IDE and it run prefectly... In th other hand... without installing any driver the windows instalation recognices the SATA drives, but not the RAID. Maybe I just got to install the raid driver but not the SATA driver... the nforce3 driver form nvidia.com is pretty old... The real funny is that when i installed winXp x64 BETA i hadn' any problem... (winXP 64 doesn't admit the 32 bit driver=
Which driver i'm supposed to install? to INSTALL winxp64 on a SATA RAID and make it boot from there?
Thaks a lot

HI! i'm the one wih the raid problem on a k8n neo2....
That's what a i Did.. i unpacked the exe and copy the files in a floppy... question is: if i do that, windows instaler askme for some files that aren't in the .exe, anway it reconices the raid and everithing goes fine until the first BOOT on windos... it shows a blue screen, butremoves it so fast that i cant read it or pause the system. But i know it's a raid problem because if i install it on a ide disk it works.
The nforce3 drivers are almost a year old, and i'm not sure if nforce4 is compatible...
I think the're compatible because if you enter in msi driver download page and select my model, they put the Nforce3 and nforce4 for win64 and my model is only nforce3. The thing is they havent released the nforce3 for WIN 64.... So.. It's normal that win asks me for some files that ain't in the .zip file (i extracted the files o course) and Which driver should i put the Nvidia one year old nforce3 or the new nforce4. (the nforce3 for 32 bits is rejected by windows) or... i have to wait the new nforce3?
thanks for helps

Problems loading updates for PSE/PRE 9 after re-installation

Hi
After having upgraded Windows 8.1 to 64 bit (earlier 32 bit) I re-installed both PSE 9 and PRE 9 and registered both of them
Next step was to download PSE/PRE updates (packages available for both products) but that ends with error messages
Adobe Photoshop Elements 9.0.3 Update
There was an error downloading this update. Please quit and try again later.
Photoshop Camera Raw 6.5 Update
There was an error downloading this update. Please quit and try again later.
Premiere Elements 9.0.1 Updater
There was an error downloading this update. Please quit and try again later.
I quit and came back later - several times - yesterday and today - but no chance to load the updates.
I really need the updates at least for Camera Raw 6.5 which refuses to open CR2 files from a Canon EOS 60D
My guess was that it could have to do with missing deactivation of my previous installation (meanwhile fixed, by booting into 32bit Windows 8.1 - still available on another partition, deactivating and removing both PRE and PSE).
So I was in contact with Adobe Support via chat in case my serials had to be unlocked but they just replied that I would have received another error message and that I shall contact the forum for older products like PSE9
But they also stated that the updates are available @Adobe, no known system problems.
I hope you have a better answer.
Thank you for helping!
Br
Bernd
PS:
System Config: i5 3.2 GHz, 12 GB RAM, Windows 8.1 x64 t (new installed), NVidia GeForce GT520, latest driver
Main Adobe products in use: Lightroom 5.6 (x64), PSE 9 & PRE 9
Internet Connection: Fibre 100 Mbits up/down (this cannot be the reason )

It's an issue on adobes side.
The easiest thing to do is download and install the updates from here:
photoshop elements 9
Adobe - Photoshop Elements : For Windows
premiere elements 9
Adobe - Premiere Elements : For Windows

Win 7 x64 & PSE?

Similar Messages

Maybe you are looking for