Win 8.1 Broadcom Bluetooth Adapter driver install on p7-1446

I'm not able to install Win 8.1 Broadcom Bluetooth Adapter driver on my p7-1446 (2013-10-22 , Version12.0.0.7620 Rev. A, 8.59M).
Any suggestion would be helpful.
Thanks Johnjdurse

Hi
Try this driver
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-110822-1&cc=us&dlc=en&lc=en...
and see if it works
Hope this helps.
***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
-VJ
Although I am an HP Employee, I am speaking for myself and not for HP.

Similar Messages

  • Fail to install broadcom bluetooth 2070 driver

    fail to install broadcom bluetooth 3070 driver on my HP pavilion g4-1007tx
    error message came out was error 1935... tried reinstalling the drivers but still fail

    Now look what you've done.
    You've gone & gotten "all specific" so the wannabesthat like to sound important by throwing links at you, have run a mile.
    Lol.
    Just take it to a proper tech dude, or go to a reputable fix it yourself site like this one & don't waste your time here. (I of course got thrown here from google & cringed).
    HP are legendary for having problems that develop smaller problems, immigrate to problemville and breed with other siblings of similar problems to have more problems.Wanna try tech support?? They will tell you that if its your fault (He*l, you have no idea if it was; and they know it!!!) so you won't go there unless your super pis*ed, extremely rich (odds are if your trying to fix it yourself you aint) or have had enough.
    Buy a Toshiba, ASUS or Acer, anything but an HP.
    My advice, uninstall & re-install it & see how you go, if your lucky it may work.

  • G710 Windows 7 Pro x64 Bluetooth + Wireless driver install errors (can't install)

    Hi all,
    I've recently just purchased the G710 i3 model as a birthday gift for my dad. It originally came with Windows 8 installed but my father prefers Windows 7 so I've installed this on a SSD (replacing the 1TB drive).
    After updating Windows 7 Professional x64 with updates via ethernet I started to install all the drivers in the following order:
    note: downloaded x64 drivers (for obvious reasons)
    chipset
    graphics (intel hd4600 first followed by nvidia gt 720m)
    NIC LAN
    Audio
    Bluetooth and Wireless (won't work - see below for errors)
    Touchpad
    Card Reader
    Webcam
    Intel Management Engine (ME)
    Intel Rapid Storage Technology Driver (RST)
    BatteryCare (replacing the Lenovo Energy Management)
    I've downloaded all from the Lenovo web site except up to date Chipset, ME and RST from Intel.
    All drivers except for the Bluetooth and Wireless have installed fine. All Fn keys work except for the "Airplane Mode" (guessing due to the driver not being installed).
    These are the following errors I get:
    http://i618.photobucket.com/albums/tt265/aniceguy85/forums_keep/x64_error01.png~original
    after clicking on OK ... I get the following
    http://i618.photobucket.com/albums/tt265/aniceguy85/forums_keep/x64_error02.png~original
    after clicking on OK ... there is another message displayed in the CMD window directly underneath the 1st one which is exactly the same text. Both windows then immediately close.
    I tried the 32 bit version of the driver and got exactly the same result.
    Can this be fixed so it can work? I'm hoping it's not just me.
    Thanks for any help in advance, Pete

    hi pete_agreatguy,
    Welcome to Lenovo Community Forums!
    The extraction maybe looking at a missing folder.
    When you downloaded the driver 
     WLAN and Bluetooth Driver (Intel, Broadcom, Qualcomm) for 64-bit Windows 
    When you doubleclick it it should pop up a winodw where you hit next , agree then it shows a page where you can see a box with a browse button. can you share if you are getting that?
    like this:
    Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Broadcom Bluetooth 2070 Driver

    HP Pavilion dv7-4173us
    Windows 7 Home Premium Upgraded to Windows 8 Pro with Media Center.
    Had a problem with finger print reader in windows 8 pro but updated drivers worked.
    Default Bluetooth driver in windows 8 was installed properly but did not work, there where no services in the bluetooth software to be enabled.  All windows 8 updated installed except the 1.6mb bluetooth update.  I tried updating the bluetooth driver with the original windows 7 driver that would not install in win8.  I tried the online broadcom download driver installation that did not work.  Downloaded the Broadcom v1200 bluetooth software and drver that installed but device manager dose not recognize it, Unknow Device.
    Any Help Would Be GOOD!

    Hello defici. I understand you're trying to get your bluetooth working after upgrading to Windows 8. Is this correct?
    I checked and this notebook has, currently, not been tested with Windows 8. So, there are no official drivers available for the model. Also, you mentioned that you tried installing the Windows 7 drivers. Did you try using compatibility mode to do this? If not, try the following.
    Download the Windows 7 64-bit driver here.
    Extract the driver but stop the installation after the extraction process. 
    Navigate to C:\swsetup\sp50180 and locate the setup.exe file.
    Right click on setup.exe and select Properties.
    Then select the "Compatibility" tab.
    Check the "Run this program in compatibility mode for..." box. Then select Windows 7 in the drop down menu.
    Also check the "run this program as an administrator" box.
    Save the changes and then run the program.
    Verify functionality and post the result.
    I'll keep an eye out for a reply. I hope you have a great day and a great weekend!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • Bluetooth Stack driver Install problem

    I have X205-9800 labtop. I recently try to update with Bluetooth Stack for Windows Vista (v6.10.02T; 03-03-2008; 60M) from older Bluetooth Stack for Windows Vista (v5.10.06T_20070314; 05-17-2007; 27M).
    Big problems! First installation threw a box with number 1158 and ok button. When you press ok, installation stops. Then the trouble begins. No Bluetooth. Computer can't see bluetooth and other bluetooth devices can't see it. Only way to get back to normal operation is to reinstall Bluetooth Stack for Windows Vista (v5.10.06T_20070314; 05-17-2007; 27M).
    I don't necessarily need to update my bluetooth driver. However, I thought that updated driver is there for reasons like improvements and correction. Anyone encountered same issue and any solutions? Thanks

    Satellite X205-S9800
    It's a mystery to me why Toshiba changes versions like that without any explanation.
       Bluetooth Stack for Windows Vista (5.10.06T_20070314)
       Released Date: 05/17/07
       Size: 28,615,328 bytes
       Bluetooth Stack for Windows Vista (6.10.02T)
       Released Date: 03/03/08
       Size: 63,689,696 bytes
    If the older version works okay, I'd forget it.
    I never upgrade unless there's a problem. 
    -Jerry

  • Driver Install Failure (Bluetooth Device: Broadcom BCM20702A0/Kinivo 4.0 USB Bluetooth Adapter)

    About a week ago I purchased the Kinivo BTD-300 4.0 USB Adapter from Amazon (http://www.amazon.com/Kinivo-BTD-400-Bluetooth-4-0-adapter/dp/B007Q45EF4). When I go into the control panel it shows up as a Broadcom device. I have ran the software available on the disk and installed it multiple times and downloaded drivers straight from the Kinivo and Broadcom website and installed both of those to no avail. I have successfully connected my phone with the device, but since then it has shown up with the troubleshooting symbol. I have also ran the Microsoft Fixit and HP Troubleshooter which both came up as a driver error, but when downloaded it would come up as "Driver install failed". I've tried all of these steps multiple time with the error everytime. Any possible fix or advice would be greatly appreciated!!
    Thanks,
    JJ H

    Hello @leafgreen7,
    I understand that you are having issues getting the Kinivo BTD-300 4.0 USB Adapter to work on your HP Pavilion HPE h8-1124 Desktop PC running Windows 7 and having no luck. As it is the driver that will not install I would advise you to contact Kinivo at their Support Site as they will have more specific information on what can interfere with their drivers installing.
    I hope  this helps. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • help please Bluetooth Headset on X200s - Broadcom Windows 7 Driver Not Installing

    So just installed Win7 RTM (v 7600) on a X200s. I have a Plantronics 510 Bluetooth headset that I use for VOIP. I followed the connecting instructions (just as I've successfully done with other Lenovos) and gone through 1 failed attempt (which happened on the RC version 7100 too). WIn7 happily recommends I download the newest Broadcom Driver at http://www.broadcom.com/support/bluetooth/update.php
    I download this driver install kit and when I attempt to install it I get an error immediately. (this worked fine for me on my old X61s)
    "The program cannot upgrade your software. Please contact the manufacturer of your bluetooth device for support."
    The problem with this is that Plantronics relies on the built in BT driver to work. I had a challenge on my older X61s (discovered it wasn't installing due to internal firewall issues) but knowing that, I took the X200s home and tried the install at home, off of corp net.
    I've been able to connect successfully to other Bluetooth devices (like my mobile phone) but the BT headset won't take any drivers. Broadcom's "support" is anything but supportive.
    I've uninstalled (through device manager) the BT Peripheral Device & scanned for hardware changes. Still get the same failure.
    Anyone have any suggestions? Has anyone run into this problem also and found a solution or workaround?  Thanks in advance.
    Windows 7 Build 7100
    X61S

    On my X200t with W7 RTM x64 I came across the same issue.
    First I went through the process of trying the W7 beta from Broadcom with the same result.
    Then I used the unpacked driver-only from the lastest official Lenova Vista X64 package, which allowed it at least to be properly recognized. The headset however remained fully unoperable.
    I ended with a full install of the Vista X64 package and now the headset works fine. Not a single issue anymore.
    Lenovo Premium Business Partner
    X1 Carbon Touch | i7-3667U | 8Gb | 256Gb | HD 4000 | 14HD+ | WWAN | W8.1 Pro RTM x64 |

  • Cannot get Bluetooth adapter on PC to sync with Ipod Touch Keep getting no driver installed message. Adapter works with other bluetooth devices, help please

    I cannot get my iPod Touch to sunc with my Bluetooth adapter. The adapteer works with other BT devices. I received a message stating "no device driver installed" I am presuming the message is associated witht eh iPod. Any help or ideas appreciated.
    Thanks
    Anthony127

    The BT profiles on the iPod do not allow pairing with a computer.  See:
    iPhone, iPad, iPod touch: Supported Bluetooth profiles

  • Error while installing network adapter driver on HP ML 370 G4

    We have HP ML 370 G4 server. And I get an error while installing driver for embedded network adapter on Solaris 10.
    I don't know what to do...
    Can anybody help me??
    # pkgadd -d /tmp/BRCMbcme.pkg
    The following packages are available:
    1 BRCMbcme Broadcom NetXtreme Gigabit Ethernet Adapter Driver
    (i386) v7.5.12
    Select package(s) you wish to process (or 'all' to process
    all packages). (default: all) [?,??,q]: 1
    Processing package instance <BRCMbcme> from </tmp/BRCMbcme.pkg>
    Broadcom NetXtreme Gigabit Ethernet Adapter Driver(i386) v7.5.12
    Copyright (c) 2001-2003 Broadcom Corporation, Inc.
    All rights reserved.
    This product is protected by copyright and distributed under
    licenses restricting copying, distribution and decompilation.
    Using </> as the package base directory.
    ## Processing package information.
    ## Processing system information.
    6 package pathnames are already properly installed.
    ## Verifying package dependencies.
    ## Verifying disk space requirements.
    ## Checking for conflicts with packages already installed.
    ## Checking for setuid/setgid programs.
    This package contains scripts which will be executed with super-user
    permission during the process of installing this package.
    Do you want to continue with the installation of <BRCMbcme> [y,n,?] y
    Installing Broadcom NetXtreme Gigabit Ethernet Adapter Driver as <BRCMbcme>
    ## Installing part 1 of 1.
    /kernel/drv/bcme
    /kernel/drv/bcme.conf
    /usr/share/man/sman7d/bcme.7d
    [ verifying class <none> ]
    ## Executing postinstall script.
    ("pci14e4,1644") already in use as a driver or alias.
    postinstall: add_drv bcme failed
    pkgadd: ERROR: postinstall script did not complete successfully
    Installation of <BRCMbcme> failed.
    #

    If you're sure that you have a Broadcom BCM57xx
    device installed in the machine, then you should have a look at
    "prtconf -pv" output, locate the Ethernet device, and check the
    "vendor-id" / "device-id" property for the NIC.
    If the Broadcom device is compatible with Sun's "bge" driver, you
    can try to install an addition driver binding entry for your device,
    using the update_drv(1M) command
    update_drv -a -i '"pciVVVV,DDDD"' bge(where VVVV and DDDD is the pci vendor / device id found in
    prtconf -pv output).

  • Satellite P750: Unable to install Bluetooth Stack driver on Windows 7 (x64)

    Hello.
    I own a *Satellite P750-02T* (Part no. *PSAY3A-02T001*).
    In the order what I did:
    1) I formatted its HDD and reinstalled OS to *Windows 7 x64 Ultimate SP1*.
    Then I downloaded *ONLY BIOS and the drivers* from [its Downloads page|http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25] :
    2) I updated its BIOS to *v1.90* (the laptop came with v1.80)
    3) I installed all the drivers:
    - both LAN and WiFi
    - Intel Chipset (latest available)
    - all video drivers (Intel HD Graphics, NVIDIA Graphics, and Intel HDMI)
    - Card Reader
    - Realtek HD Audio (latest)
    - Synaptics Touchpad
    - USB3.0
    - IR
    - TV-Tuner
    However, I'm *unable to install the Bluetooth driver (v8.00.06(T)* )...
    When I run setup from the [above-mentioned page|http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25] it partially detects *'Bluetooth USB Controller-10 from TOSHIBA'* (USB\VID_0930&PID_0215&REV_001)
    and then installation simply freezes displaying +'Installing the Bluetooth Driver. Please wait+.' and stays like that forever...
    I also tried downloading a driver from [another location|http://aps2.toshiba-tro.de/bluetooth/index.php?page=download-toshiba] for TOSHIBA notebooks - v8.00.02(T):
    and followed installation instructions displayed under 'Details'
    but there was the same outcome - the setup simply freezes...
    Installing Hotfix (*KB978258*) recommended there didn't work either - the message '+The update is not applicable to your computer+' pops up.
    And I understand why - this Hotfix is [already included|http://download.microsoft.com/download/E/B/A/EBA55FE2-373A-4351-9346-6D762B79AA69/Updates%20in%20Win7%20and%20WS08R2%20SP1.xls] into Service Pack 1 for MS Windows 7.
    I spent hours searching on the Internet for a solution. Although there were some similar cases none of the recommendations actually worked. I tried installing:
    - WiFi driver before installing Bluetooth (someone suggested that those two are the parts of the same card);
    - resuming installation in Safe Mode;
    - *Toshiba Value Added Package* hoping those tools somehow will kick in.
    Nothing worked...
    It's interesting that when for the sake of experiment I tried to run installation for my generic Bluetooth adapter (using the driver [for non-TOSHIBA notebooks|http://aps2.toshiba-tro.de/bluetooth/index.php?page=download]) then everything run smoothly!
    *Using Bluetooth connection on this laptop is very crucial for me.*
    I hope I shall not have to return this wonderful notebook as I know TOSHIBA is one of the best manufactures and am sure there is a solution to this problem.
    Thank you very much.
    Evgeny.
    Message was edited by: CVD
    clarified about using another generic Bluetooth adapter with non-TOSHIBA driver

    For FN functionality you must install Toshba Value added package. Toshiba flash cards utility is part of this package.
    I dont know if P750 has WLAN switch but before you start BT installation be sure WLAN LED is ON.
    BTW here is installation order for Win7 on Satellite P750 (European but the same order must be for your Australian model):
    Win7 64bit SP1
    PatchFiles V1.0
    PlayReady PC Runtime V1.3
    Sun Java2 Runtime Environment 1.6.0_20
    TOSHIBA Assist 4.02.02
    TOSHIBA Bulletin Board 2.1.10
    TOSHIBA ReelTime 1.7.17.0
    Intel Chipset SW Installation Utility 9.2.0.1015
    Intel Management Engine Interface V7.0.4.1197
    Intel Display Driver 8.15.10.2353
    NVIDIA Display Driver 267.44
    Intel Rapid Storage Technology Driver 10.1.2.1004
    TOSHIBA Supervisor Password Utility 1.63.51.2C
    TOSHIBA HW Setup Utility 1.63.1.34C
    TOSHIBA Flash Cards Support Utility 1.63.0.12
    TOSHIBA Value Added Package 1.5.4.64
    NVIDIA HD Audio Driver 1.1.13.1
    Realtek Audio Driver 6.0.1.6305
    TOSHIBA Wireless LAN Indicator 1.0.3
    Intel Wireless LAN Driver
    Synaptics Touch Pad Driver 15.2.11.1
    TOSHIBA HDD Protection 2.2.1.13
    Atheros Bluetooth Filter Driver Package v1.0.4
    Bluetooth Stack for Windows by Toshiba v8.00.06(T)
    Realtek LAN Driver 7.038.0113.2011
    Jmicron Card Reader 1.00.57.02
    ENE CIR Driver V3.2
    YUAN DVB-T/ATSC Tuner Driver V2.3.3.41
    USB3.0 Driver 2.0.34.0
    TOSHIBA Sleep Utility 1.4.2.7
    TOSHIBA Face Recognition 3.1.9
    TOSHIBA eco Utility 1.2.24.64
    Intel Proset 14.0.2.0.1.s64_wCAT
    TOSHIBA HDD/SSD Alert 3.1.64.8
    TOSHIBA Service Station 2.1.52
    HDMI Control Manager 2.0.0.7.64
    TOSHIBA Remote Control Manager 3.0.6.1
    TOSHIBA PC Health Monitor 1.7.5.64
    ConfigFree
    TOSHIBA Web Camera Application
    TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-14_wMSI
    TOSHIBA Media Controller 1.0.86.2
    TOSHIBA Media Controller Plug-in 1.0.6.1
    TOSHIBA Resolution+ Plug-in for Windows Media Player 1.1.0
    Intel Wireless Display 2.0.29T2
    PatchFiles PCIIDEREG-1.2
    PatchFiles
    I hope this will help you a bit.

  • Broadcom bluetooth drives installation failed, no bluetooth device was detected.

     hello, i have HP Pavilion dm4-3013cl Entertainment Notebook PC laptop.and i am trying to install BROADCOM BLUETOOTH DRIVERS in my laptop and i am getting this error that no bluetooth device was detected. please make sure that your bluetooth device is plugged in properly in order to countinue installation. now i want to say that i lost my recovery disc and after while for heating issue my main hard disk break or not working condition so i just replace hard disk and ofcourse i dont have os so i install fress windows 7 ultimate 64bit in my laptop. and install each drivers provide by HP website i downloaded all drives and installed and my windows 7 is also up to date. i search for this issue allmost one week for solution but cabt fix and i come to know that before insalltion of BROADCOM BLUETOOTH DRIVERS i have to enable bluetooth in HP WIRELESS ASSISTANCE but in my case i think i cant find due to new disk and new os. i can send file or recieve with bluetooth can paired with my all smartphones too but cant listen music in head phones. cant access LISTEN TO MUSIC, i know the reason is only this drivers is not installing properlly and i want to fix it. now i a tired and i dont have time to search and fix it so please help me out from this issue please and sorry for my poor grammer.

    fixed !!!                now i come to know, the problem is drives which i update it from intel websites, paul you suggest me correct driver for my bluetooth but it is allready in my laptop which i updated before but again i download and install and nothing happen then i reformate laptop and again install all drivers which i downloaded from hp website for my laptop and again update all drivers manually and automaticallu both from intel website and intel utility drivers software and update windows too and i got same problem. cant hear music from bluettoth head phone, so again i reformate laptop but this time i just installed drivers which listed from hp website, i didnt update anything and as you said i didnt install broadcom bluetooth drivers because it is not for my laptop so then i connect my blutooth and try to access listen to music and o m g. it works now i can hear nusic form bluetooth, i dont believe this. but yes it works this forum help other also so thanks paul and have a nice day now i newer going to update my drivers...  in pic you can understand that i am not using latest version of bluetooth drivers.

  • How to install Trust bluetooth adapter 4.0 on my HP Pavillion p6-2304eb

    I have tried several times to install, but after installing, PC (windows 8.1) doesn't recognize my adapter???
    message: plug in the adapter
    The bluetooth adapter is a TRUST bluetooth adapter 4.0 with productnumber 18187.
    plugged in a USB 3.0.
    This question was solved.
    View Solution.

    Trust has not supplied a driver for Windows 8.1 so the issue is not with your PC or the operating system. Tyr plugging it into a usb 2.0 port. USB 3.0 ports are picky about devices.
    The problem  is that the bluetooth dongle has no support for Windows 8.1.  Contact Trust .  
    Sorry to bear bad news. I would return the dongle and find one that suports Windows 8.1.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Ralink bluetooth adapter and wifi driver missing for HP ENVY 15-j101ex Notebook PC (ENERGY STAR)

    hello theres a problem connecting my laptop with any wifi networks for a long time now. the problem comes and goes. i cant connect it with any available networks or cant detect them at times. i would like to re-install the ralink bluetooth adapter and wifi driver as i had uninstalled them. where can i get it? please help me out. its been missing for weeks now. also i cant transfer or receive any files because the ralink bluetooth adapter is missing. kindly reply asap. thank you so much.

    Hi  ,
    Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your  HP ENVY 15-j101ex Notebook and issues with the  Wireless drivers. Here is a link to your driver page.  Here is a link for troubleshooting the Wireless connection. I would use the section on The Windows 8 Network and Internet Troubleshooter. Here is a link that will show you how to connect a Bluetooth device to your Notebook.  Hope this helps you connect. Thanks.

  • I have an Epson printer on a Wifi network. Windows 7 desktop and and HP Win 7 laptop (my wifes) print to it just fine. My MacBook Pro running Yosemite won't detect it, and I have the latest driver installed. No problem when I had a Canon...

    I have an Epson printer on a Wifi network. Windows 7 desktop is running the network, and my wife's HP Win 7 laptop prints to it just fine. My MacBook Pro running Yosemite won't detect it, and I do have the latest driver installed. I didn't have a problem when I had a Canon Pixma on the network, but when I replaced it with the Epson nothing seems to work. I go to add a printer to the queue and only the FAX function of the printer shows up - not the WS-4530 print function. Does anyone out there have any suggestions?  Please??? :-)

    Hi Kelly,
    As someone who has to print from my Mac to a networked printer at home all the time, I can certainly understand how frustrating it must be to have that fail to perform as expected. Let's see if we can get you up and running.
    I would suggest that you troubleshoot using the steps in this article -
    OS X Yosemite: Printing troubleshooting
    Start with the section titled Check the network.
    Thanks for using Apple Support Communities.
    Sincerely,
    Brett L 

  • Where to find a driver for Belkin Bluetooth Adapter Dongle F8T017ng

    where does one find a driver for Belkin Bluetooth Adapter Dongle F8T017ng?

    From the manufacturer.
    Did you google?

Maybe you are looking for

  • Trying to install 64-bit 10.2.0.2 agent on 64-bit OS

    but fails with some rpms missing - it's looking for older RPMS. Help please, Checking operating system package requirements ... Checking for make-3.79; found make-1:3.80-5.     Passed Checking for binutils-2.15.92.0.2-13; found binutils-2.15.92.0.2-1

  • Trying to add a listener to a JComboBox in a JTable

    Hi all. I have a little problem which I can't resolve. I made a program in which I create a table using a class which extends JTable (but this isn't the point with the problem, I think. It's only for rendering purposes) In this table I put various ty

  • Exporting B/W jpg Problem

    I have a wierd problem with InDesign CS4.  I have a blank document and I put a black frame on the page and then export the page as a jpg file.  When I open the jpg with Photoshop it opens in RPG mode, with the black frame having K = 91. 1.  Why isn't

  • Configuring pickup groups

    We have a site that has a PagePac unit connected to a FXS port. CM is 4.1.3sr2. When the receptionist steps away / end of day, they forward the main number to the overhead night bell. The Night Bell is in a pickup group, as are all the phones, so tha

  • Disk was not ejected properly

    "The Disk was not ejected properly" this message keeps on coming up and seems to be referring to USB Memory Sticks. No disk had been removed. This is only happening since installing Mountain Lion and is very annoying especially since it keeps on disp