Win 8.1 x32 gfx driver for Intel Celeron embedded gpu

Hello, i upgraded my Lenovo Flex 10 from windows 8 to windows 8.1 and there are drivers for everything except Display driver for embedded Intel Celeron GPU. What a shame?
I tried to contact Intel, but their website says i should ask my solution manufacturer.
My CPU is Celeron N2810 and there is only driver for x64, but it was x32 operating system installedon my Flex 10 and now i can not downgrade and there is no display driver, except Mycrosoft's default one (Metro Interface is laggy).

Hi,
According to the results of these two dump file, they had same reason of BSOD, both they were running google update when BSOD occurs, maybe you can try to remove Chrome on your system for test.
Roger Lu
TechNet Community Support
Chrome is not the problem, its very widely used so if there was a problem it would get fixed eventually
its only a browser, the problem is a device. BSOD happens at the kernel level where the device drivers are loaded
Place your rig specifics into your signature like I have, makes it 100x easier!
Hardcore Games Legendary is the Only Way to Play!

Similar Messages

Driver Intel USB 3.0 Driver for Intel 8 and U/Y Series doesn't work with a specific Kingston USB

Hello guys, just the other problem I'm facing with the 840 G2
I'm working in the MDT image for the HP 840 G2 and I would like to comment you one problem that I found with the USB 3.0 drivers. Based in your webpage, the last HP USB 3.0 official drivers are:
Intel USB 3.0 Driver for Intel 8 and U/Y Series Products
3.0.1.41 A from 15 dic 2014
I have found that those drivers doesn't work properly; if you insert a Kingston DTSE9 (32GB) the content of the usb will not be accessible randomly. The event viewer will display:
The driver detected a controller error on \device\harddisk1\DR13
To solve this problem you have to obtain the last version of the drivers from the Intel webpage:
https://downloadcenter.intel.com/download/22824/USB-3-0-Driver-Intel-USB-3-0-eXtensible-Host-Control...
I have all the drivers properly installed and it seems that the computer is working fine, however I'm a little worry thinking if I should update all the driver to avoid possible problem like this one.
If you have found similar problems it would be nice to share it.
Thank you very much.

Hi,
Please use the following post:
http://h30434.www3.hp.com/t5/forums/replypage/board-id/General/message-id/76373
Thanks.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

System Update Stalls at WiFi Driver for Intel Cards

T510, XP 32bit. Running system update, it has now been stuck on the "WiFi Driver for Intel Cards (For windows xp 32bit)" installation going on 4 hours+ now. This has happened with like model's / OS and the result is usually to force a reboot. And manually install it. Any suggestions why system update takes hours to install the WiFi Driver for Intel Cards (For windows xp 32bit)?

Then don't try and install it. Uninstall the device and shutdown. Once you reboot it should rediscover and attempt the driver installation. It you're have trouble with the same driver package. Delete it/remove it and download it again and deoompress the package. Be sure it's the right on for the OS and device.
You may have to work in safe mode to clean this up.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

Looking for driver for intel GMA 3650

colours of background images of websites are all mapped to white and as such are invisible.
I guess the reason could be that the last event of the WIN 10 microsoft basic diplay adapter driver install was: Das Gerät "PCI\VEN_8086&DEV_0BE2&SUBSYS_40121297&REV_09\3&11583659&0&10" erfordert weitere Installationen.
If it wants to install further driver stuff this can only be the driver for the INTEL intel GMA 3650 graphic accelerator chip,
which is present on my motherboard.
my OS Win 10 tech preview build 9926

Hi HB9RUZ,
If your Network connection is well and IE could open webpage correctly, you may find the proper driver on the Intel Website:
http://www.intel.com/p/en_US/support/highlights/graphics/gma3600
Please note: As this website is not hosted by Microsoft, the information may change without notice. Microsoft does not guarantee the accuracy of this information.
Or if you would like to update the driver, you may take use of Device Manager:
Update or Change a Device Driver
Further, as Team Zigzag suggested, if you would like to upgrade to Windows 10 Build 10041, please check for your updates.
For reference:
Windows 10 Technical Preview Build 10041 now available
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Driver for intel cs330 webcam on windows 7

HI I have a great old webcam a Intel CS330, but i have just bought a new computer and its runing windows 7 and i cant seem to find a driver for it :( Could you please tell me where i may get this from if it is avalible or if it will be anytime soon.
Thank You

I was having this same issue and found a solution. I was thrilled when I upgraded to 7, until I found out that MANY drivers and applications are just not compatible. BUT....here's the loophole: you can set the program to run in Windows Vista compatibility
mode and it WILL work. To do this: 1) Download the driver utility (CS330.exe in this case) to your desktop. Note: I used the CS330 driver for Windows XP and am running 64 bit Windows 7 on my computer. 2) Right click on the icon and select "Restore Previous
Versions" 3) Select the "Compatibility" tab. 4) Check the box for "Compatibility Mode" and select "Windows Vista (Service pack 2) from the drop-down menu. 5) Click "Apply" and then "Ok" 6) Reboot your computer
and click on the icon to install. Follow instructions given on the screen. Hope this helps!
I tried this, doesn't want to find the driver in the c:/temp/cs330-xp dir

Driver for Intel Corp. Intel(R) PRO/Wireless 2200BG in Solaris 10 x86

Hi Folks,
I bought a Laptop with the NIC mentioned in the Subject. After installing Solaris 10 x86 I'd like to install a driver for this card. Can someone of you tell me how, or point me to a good documentation?
Cheers
Sven

as far as i know, intel wireless not supported yet in solaris 10.
damn, intel and solaris have not realy work our on their support relationships. No wonder Sun went for AMD. :p

SPARC Sol driver for Intel 82543?

We are considering designing a PCI Gigabit Ethernet adapter based on the
Intel 82543 MAC. Our customers love Solaris 2.6/7/8, so we would like to
know if a sample or common driver exists for this chipset and OS.
Bill Smith

Sample drivers for Solaris 8 are at the Driver Development Site: http://soldc.sun.com/developer/support/driver/
Intel did do a driver for Solaris Intel Platform.. You can get it at
http://www.sun.com/io/ihv-drivers.html#e1000g-8
Contact Intel to see if they have done or would consider doing a SPARC driver.

How to install driver for Intel Pro 1000 PCI Network-card

Hello,
I just bought the a.m. Intel Pro 1000 Network adapter, but I don't know at all how to install the driver for Solaris 10.
The installation instructions delivered from Intel didn't help me at all, because I can't uncompress the INTCGigae.pkg and the INTCGigaE.tar.z files.
I copied them to /tmp and folllowed Intel's Installlation Instructions.
Please keep in mind I am new to Solaris 10, with no Linux/Unix experience, when helping me.
Thanks in advance for help and assistance.

Hi!
And what happens if you install the driver from the Toshiba WLAN portal:
http://aps2.toshiba-tro.de/wlan
I still dont know what you mean with Askey for Toshiba
You should try to install the driver manually. Choose in device manager the WLAN card, right click and select Update Driver. Choose the advanced installation where you can choose the driver directory yourself and navigate to the folder where you have stored the downloaded driver.

Who can write Solaris video driver for Intel 810?

We have a customer who wants to use a Flex/ATX mother board with the Solaris OS. The Flex/ATX mother boards us the Intel 810/810E chip set and we have not been able to find a Solaris video driver for that chip set. Does anyone know if such a driver exists or could anyone suggest a company/individual who I could contact to write such a driver for us?
Roger Hull (IBM - Charlotte NC)

Santucho,
If you can not find the video board listed on the Solaris Hardware
Compatibility list found on access1.sun.com, then go over to XInside
at:
http://www.xinside.com/
Their Accelerated-X Display Server is their flagship product. It comes with graphics drivers to support over 600 single-head graphics cards and free customer support. Available in box form, it is licensed on a
per machine per user basis.
Hope thjs helps.

Windows 7 Driver for Intel(R) PRO/Wireless 2200BG

Hi,
I've upgraded my MotionComputing LE1600 Tablet from Vista Business to Windows 7. A relatively seemless process and a more efficient OS. However, I need the Intel(R) PRO/Wireless 2200BG driver for my WiFi card or maybe even a generic one? Anyway have a suggestions?
Thanks,
j

I have a DELL Lattitude D830 with the Intel PRO/Wireless 4965AGN. I upgraded from Vista Business 32bit and all of the netwrok connections (wired and wireless) went out. The wireless told me I had an invalid IP configuration and that I could connect locally, but not internet. Looked like a DHCP issue - couldn't get a valid IP configuration, coudn't specify static IP information.
I tried *everything* to get the network to work. Luckily, I stumbled across this post. If you aren't familiar with it (I wasn't), in order to install in Vista Compatibility mode, right-click on the .msi and choose "Troubleshoot Compatibility", then choose Vista from the list of OSs. I DID get the latest drivers, both from Dell and Intel (The one that I installed was from Dell, haven't tried the Intel version which is slightly newer under this process). You may have to get the newest version to get it working - not sure.
Mike

Latest Driver for intel hd 3000 with support for switchable graphics for radeon hd 7450M

My laptop specs
HP Pavilion g6 1302tx
i3 2350M intel HD 3000 gpu
radeon HD 7450M 1GB ddr3 dedicated gpu
OS - windows 8 64-bit
The drivers listed for the laptop are an age old
Also no drivers for windows 8.1
Can anyone please helpl me how to install new and latest graphics drivers?
I have tried from AMD and intel websites. But then switchable graphics doesnot work properly.

Hi @Paul222
Welcome to the HP Support Forums! I see that you are looking for the latest graphics driver for your Intel HD 3000. Unfortunately, the only drivers that you can use are the ones on the HP website as switchable graphic are configured by the manufacturer of the notebook not the manufacturer of the graphics card.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Bus power external drive for Intel IMac recommended?

Getting ready to replace external hard drive.I have a 2TB now that is formatted in to 2 drives, 1 for TM and 1 for clone. Told that TM needed it's own drive and should get a second for clones and other files. I can make a bootable drive out of the external but not TM drive.
I was looking at some bus-powered drives and not sure how IMac and TM on a bus powered drive would work. Am I able to consider these bus powered HD's - they have power supplies available? Can I depend on my Mac/TM to work well with a bus powered drive with an ac adaptor (because of there small size) or should I get a powered external hard drive for Time Machine and something smaller for my clone? Any ideas?
Looking at OWC Mercury Elite Pro mini, GDrive mini and the CalDigit AV drive. Open to any suggestions and using FW800.
Thanks.

I have never trusted bus powered usb devices. I use a powered multi port hub. Not only does this supply bus power to an army of usb devices (printer, scanner, camera, hard drives, etc.), the hub can be placed close to me. No need to reach for hidden usb ports, no trying to figure out which way is up on the plug ....
http://usb-hub-review.toptenreviews.com/
p.s. there are many posts here about usb devices being arbitrarily disconnected from the computer for lack of power.

Ihave pavilion g6 2006tx with win 8.1 pro ineed driver for unknown device

driver for unknown device
This question was solved.
View Solution.

Hi:
You may need to reinstall the graphics driver, but I think it is the same one you have now. It is from 2012 and so all they did was say it was good for W8.1 too.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-113258-1&cc=us&dlc=en&lc=en...
If that doesn't work, then unfortunately I don't know what the issue could be.

Win 7 on a31p / need driver for graphics card FireGL7800

All greetings from snowy Russia!
I had to install Win7 on my laptop a31p, in general, I am very pleased with the speed and new features. All the drivers are set automatically, and even managed to get to work the battery icon in the system tray
But there is one big problem: I can not find drivers for FireGL 7800 graphics card
I wrote a request to ATI (now AMD) but ou redirected me to Lenovo, citing the fact that they do not write drivers for these cards.
I would be very grateful for assistance in finding the driver for Win7 or la Vista!
You can write me an email: barmaley.russia @ gmail.com
Solved!
Go to Solution.

Welcome to the forum!
There is NO driver for Vista or W7 when it comes Fire GL 7800 because it's simply considered underpowered to run any of these operating systems.
I've had to tweak the XP driver to get it working under W7, and results were less than spectacular, although not bad for a 7-year old machine.
Hope this helps.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Can I use same USB drive for Intel and PPC backup?

Hi, I have a USB hdd that was used for TV recording but failed on that so I reformatted it as Mac OS extended journaled with 6 partitions (GUID), and using SuperDuper, cloned Lion from a Macbook Air and Tiger from my eMac into different partitions, with the idea of using it as an extra backup.
Tested the USB drive on Disk Utility verify disk function and it said all 6 partitions appear OK. Can boot the MBA from the USB drive (although slow) but the eMac does not show the disk image on the USB drive as an optional restart item. I have eMac backed up on a separate Firewire drive but would like to use the USB drive as a second line of defense.
My question is, would I be able to restore from the Tiger dmg on the USB drive, given that it is GUID and not Apple partition scheme. Would I have to reformat it to Apple partition scheme. Also, how would you go about a restore from the USB drive if the eMac's OS was kaput?

You can't store a clone of an Intel-based Mac and a clone of a PowerPC-based Mac on the same drive.
That's because an Intel-based Mac can start from a GUID partition table, but a PowerPC-based Mac can only start if your USB drive is using Apple Partition Map instead of GUID. In your case, you have to buy another external drive to make a clone of the PowerPC-based Mac or the Intel-based Mac.
To change the partition map of your USB drive:
1. Open Disk Utility (it's in Applications > Utilities folder), and select your USB drive in the sidebar.
2. Go to Partition tab, and press "Options" button, where you can choose the partition map you want: GUID, MBR or Apple Partition Map. Note that you won't be able to start an Intel-based Mac from a drive that uses Apple Partition Map

Win 8.1 x32 gfx driver for Intel Celeron embedded gpu

Similar Messages

Maybe you are looking for