Win 8 and 8.1 - Acrobat X Pro - PDF Save (As) Full Screen Only

When saving a file Adobe Acrobat X Pro on my WIN 8 (8.1) computer the save (save as) pop-up window ONLY goes to full screen mode. I have CS5.5 installed on my computer and no other Adobe programs are affected. I have uninstalled and reinstalled Acrobat but yet the same problem exists. Does anyone have a solution for this?
Thanks
Ken 

Hi avo-ken,
Are you still facing this issue?
It is not a problem it is design behavior. Try double click on the upper bar of the Save As window and that should restore the Save As window.
Regards,
Ajlan Huda.

Similar Messages

  • Have installed and uninstalled Adobe Acrobat XI Pro on my Dell desktop running Windows 7 Professional. Each time I try to open a PDF file, I receive ERROR: 16 message. Would appreciate any suggestions. Thanks.

    Have installed and uninstalled Adobe Acrobat XI Pro on my Dell desktop running Windows 7 Professional. Each time I try to open a PDF file, I receive ERROR: 16 message. Would appreciate any suggestions. Thanks.

    Hi Doug Talbott,
    Please refer to the page associated with this link (Configuration error 16 | CC, CS) and follow the procedure detailed for Windows 7 and let me know if your issue gets resolved.
    Regards,
    Rahul Tyagi

  • I have been creating forms in InDesign and pulling into Acrobat XI Pro to do form fields. My client would like to fill in the PDF form, save under a different name locally on their device, and redistribute. The problem I have is that, sometimes, they want

    I have been creating forms in InDesign and pulling into Acrobat XI Pro to do form fields. My client would like to fill in the PDF form using Reader, save under a different name locally on their device, and redistribute. The problem I have is that, sometimes, they want to redistribute the form as Read Only. I know how to flatten the form on a mobile device, but uncertain how they can do that with a PC or Mac using Adobe Reader. I looked at FormsCentral thinking there might be a solution going that route, but don't believe there is. Any advice?

    FormsCentral won't help with flattening a form. You could set up the form in Acrobat so that the fields are set to read-only, using JavaScript. Not quite the same as flattening but it's the best Reader can do.
    Note that when Reader is used to e-sign a document, it gets flattened, but this won't be possible if you need to Reader-enable the form and under certain other conditions.

  • Enable Reader Rights  for Commenting and Markup in Acrobat X Pro?

    I am sure there is a nice long thread somewhere on this but I cannot find the old "Enable for Commenting and Review" in Acrobat X Pro (Windows 7, 32 bit). I get basic comments (sticky and highlight) but i need to make a PDF where my Reader X users can make all the comments and markups. I also tried doing the Send for Review task and it still did not have all the tools in Reader X.

    File > Save As > Reader Extended PDF > Enable Commenting & Measuring

  • Hi there, I currently subscribe to Adobe Pro Subscription (yearly) and I also subscribe to Adobe PDF pack (monthly).  I only require Adobe to read and create PDF documents such as converting word/excel document or a web based document.  Can someone tell m

    Hi there, I currently subscribe to Adobe Pro Subscription (yearly) and I also subscribe to Adobe PDF pack (monthly).  I only require Adobe to read and create PDF documents such as converting word/excel document or a web based document.  Can someone tell me if I'm doubling up as I'm not sure of the differences between the products and would like to save a few dollars.

    Acrobat Pro can do a lot more than the PDF Pack online service.
    Try if you can do everything you need with PDF Pack; otherwise keep Acrobat Pro.

  • When reverting to purchased Adobe Acrobat XI Pro point product, after uninstalling Creative Cloud Desktop (and CC-based Acrobat XI Pro), how do I eliminate request to renew my subscription?

    Creative Cloud just wasn't working for me, so after several years of frustration with being abroad and not online when the program decided to require online verification, I'm ditching Creative Cloud and reverting to the purchased Adobe Acrobat XI Pro point product. However, after uninstalling Creative Cloud Desktop (and CC-based Acrobat XI Pro), it still wants to go online and check my CC subscription, disallowing use of the newly installed point product version from a several year-old ESD file (and the more recent AcrobatUpd11010.dmg file).
    Anyone have an idea of how to eliminate request to renew my subscription?
    If, as a journalist, I've have these issues over the past two years, including this final insult when I'm trying to get away from CC, it can't be a one-off problem. So I'd like to hear details about others who've had a similar issue with reverting from CC back to a point product or to CS.
    Thanks,
    Tim

    Hi Tim ,
    Please refer to the following link to cancel your subscription of Creative Cloud .
    https://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
    You can get in touch with Adobe Chat Support if that does not help and to get your queries resolved.
    https://helpx.adobe.com/adobe-connect/kb/connect-chat-support.html
    Regards
    Sukrit Dhingra

  • Acrobat 9 Pro PDFファイルの画面中にある文字のフォント名などを知る方法

    Acrobat 9 Proを使っていますが、PDFファイルを開いてそのプロパティの中のフォントを開くと各フォント別に、(a)種類、(b)エンコーディング、(c)実際のフォント、(d)実際のフォントの 種類の４つが表示されます。
    PDFファイルを開いた画面中にある特定の文字についてこのような情報を知るにはどうしたらいいでしょうか。4つ全ては無理としても、そのうちのいくつかだけでも知ることはできるでしょうか。

    Tocuh UPテキストツールでテキストを選択して、右クリックすると
    プロパティからフォント情報が表示されると思います。

  • I purchased a new computer and also Adobe acrobat XI Pro.  It has not worked properly.  I uninstalled it and tried to reinstall it, but the computer will not accept the Serial number.  What can I do?

    I purchased a new computer and also Adobe acrobat XI Pro.  It has not worked properly.  I uninstalled it and tried to reinstall it, but the computer will not accept the Serial number.  What can I do?

    Hi,
    Have you tried the help documents below:
    Error "The serial number is not valid for this product" | Creative Suite
    Invalid serial number error
    In case of any other error message, please specify.
    Regards,
    Sheena

  • Uninstall and Reinstall Adobe Acrobat 8 Pro registration failed

    I have uninstalled and reinstall Adobe Acrobat 8 Pro on my new machine. My new machine runs Mac OS X 10.9.5. Every time I try to click on Help > Registration it returns an error message 'Registration Unsuccessful" "A problem was encountered while trying to send information over the Internet".  I have no issue with Internet connection. Just wondering why this is happening and is there any way we can register this application.

    Hi Ksb2009,
    This version of Acrobat was never tested on this version of Mac and is unsupported.
    I would suggest you may upgrade to latest version of Acrobat and that will work fine. It has loads of new and enhanced features than Acrobat 8.
    Regards,
    Ajlan Huda.

  • Acrobat X ProをアップデートしたらPDFファイルが開かなくなりました.

    Adobe Creative Suite 6　を利用しています。
    Acrobat X ProをアップデートしたらPDFファイルが開かなくなりました。
    どのようにすれば開ける様にできますでしょうか？
    Adobe reader　では開くことができます。

    fatboy_somiさん
    Acrobat本体は起動可能でしょうか。
    類似した事象として、もしAcrobat本体も起動せず、ご利用の端末がWindowsの場合、
    以下の事象が該当する可能性がございます。
    Acrobat X が起動しなくなる（Windows 7）
    該当する場合は、URL内の【Creative Suite/Creative Cloud の場合】をお試し下さい。

  • I installed Acrobat XI pro on a Mac but it only shows the features of acrobat reader - how do I activate the pro features?

    How do I get Acrobat XI pro on a Mac to work fully, and not just act like Acrobat Reader. i just paid and downloaded it, entered new serial number when requested, but when I open a .pdf I have no pro features showing (such as editing tools, convert to powerpoint, etc). I use XI pro on a windows PC and have no problem there.

    Perfect answer. And I feel a bit dumb (should have worked it out, but still finding my way round the Mac). Many thansk for the help.
          From: Test Screen Name <[email protected]>
    To: John Spencer <[email protected]>
    Sent: Saturday, 1 November 2014, 20:20
    Subject:  I installed Acrobat XI pro on a Mac but it only shows the features of acrobat reader - how do I activate the pro features?
    I installed Acrobat XI pro on a Mac but it only shows the features of acrobat reader - how do I activate the pro features?
    created by Test Screen Name in Acrobat Installation & Update Issues - View the full discussionYou probably still have Adobe Reader on the system. Be sure to run Acrobat instead. Use Launch Pad. Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6889718#6889718 Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:  To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.  Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Community For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • I have had my mac book pro for about a year and a half and suddenly my dvd player will not play DVDs and i can not play alot of things on full screen. Does anybody know how i can fix this?

    I have had my mac book pro for about a year and a half and suddenly my dvd player will not play DVDs and i can not play alot of things on full screen. Does anybody know how i can fix this?

    This could be several things, but let's get the obvious ones out of the way, first:
    1. Judging from your text, there's no problem with anything stuck in the mechanism; it's more an issue of no being to put in a disk. In other words, you're sure that there isn't a disk stuck in your MBP. (That happens a lot for all computers.)
    2. Go to Applications/Utilities/Disk Utility, and repair the disk. This should take under 10 minutes.
    3. Perform the procedure outlined here:
    http://forums.macrumors.com/showthread.php?
    4. After you're done, leave a message here as to the status of the repair.

  • I want to open all pdf documents in full screen initially.

    I want to open all pdf documents in full screen initially.

    With Adobe Acrobat (not Adobe Reader) you can set the initial view of PDF documents.

  • I recently had some repairs done to my ATT U-verse connection, and now my Safari doesn't open in a full screen.  How do I reset that to open in full screen?

    I recently had some repairs done to my ATT U-verse connection, and now my Safari doesn't open in a full screen.  How do I reset that to open in full screen?

    Mountain Lion is set up to close windows when you quit a program instead of saving them. To change this, put Safari in full-screen mode, move the cursor to the top, open Safari menu while holding Option key and close Safari from the menu.
    If you want to do it automatically with all programmes, open System Preferences > General, and deactivate "Close windows when quitting an application"

  • I just upgraded to lion on my intel macbook.  I would like to change my facetime alert to something different than a phone ring and, I would like to be able to have full screen.  How do I do this?

    I just upgraded to lion on my intel macbook.  I would like to change my facetime alert to something different than a phone ring and, I would like to be able to have full screen.  How do I do this?

    Downgrade Lion to Snow Leopard
    1.  Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Quit DU and return to the installer. Install Snow Leopard.
    This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
    If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions.  If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

Maybe you are looking for