Win 8 and QuickTime

Only when running GoDaddy web mail, A pop up to add QuickTime appears.  Stops all input until you respond to it.  It only allows a manual download then does nothing.  Tried compability mode already.  An answers??

I suspect this may be a problem you need to direct at GoDaddy. I can't think of a good reason why webmail would be dependent on QuickTime, and according to the system requirements QuickTime isn't supported on Windows 8.
http://www.apple.com/quicktime/download/
tt2

Similar Messages

  • ITunes and Quicktime will not launch

    I cannot get my iTunes or Quicktime to launch. I have uninstalled, reinstalled, upgraded, and tried several fixes that I found on this discussion board. No Luck! I'm using XP Pro SP3. When I first installed iTunes, it worked, but then quit working about 4 weeks later. I'm using the latest versions of both iTunes and Quicktime.

    The error message you are getting suggests that you do have one of the problem codec packs installed on your system or you have had in the past.
    Quicktime does not install Quicktime.cpl in the system32 directory.
    It is possible that one of them was installed without you knowing with other software, I think Storm may get installed with other things although I can't name anything.
    You must look for the things on my list and uninstall them if you find them. Check in Add/Remove programs to see if there is an entry there.
    When you have uninstalled the problem items go on to the next stage. If you can't find anything you had better go on as well.
    Download the stand alone Quicktime (the one without iTunes):
    http://www.apple.com/quicktime/download/win.html
    Now Remove Quicktime using the method in this article (just Quicktime):
    XP
    http://support.apple.com/kb/HT1925
    Vista
    http://support.apple.com/kb/HT1923
    When you come to your C:\Windows\system32\ folder you can delete any file or folder with Quicktime in the name.
    Restart you computer
    Install the stand alone Quicktime and check if it starts.
    If it does you are in a position to find out if iTunes is OK.

  • ITunes and Quicktime Installation Troubles

    I had to completely remove iTunes and Quicktime from my computer, and now I am having difficulties reinstalling it. When I download iTunes+Quicktime it begins to install, and then stops, saying there was an error installing Quicktime. The error is that an installation is already in progress. I have tried everything, including Windows Clean Up Utility, CCleaner, and I have gone through Control Panel, My Computer, and Task Manager. I really need some help on completely removing Quicktime from my computer. Thanks soooo much!

    Could you give the exact error message with error number if there is one.
    Does this problem only apply to installing QUicktime? If so using the installer clean up utility to remove any entries for QUicktime usually fixes this. The only catch is that Quicktime does not always show up properly in the clean up utility. Look out for blank entries or numeric entries that look like QUicktime version numbers i.e 7.x
    I would try installing Quicktime separately. Download the version of Quicktime that does not include iTunes. It is not the default option.
    http://www.apple.com/quicktime/download/win.html
    If there is a general installer problem, this thread contains a post suggesting the deletion of the following registry key:
    HKEYLOCALMACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\InProgress
    http://www.vistax64.com/vista-general/40960-vista-business-msi-error-1500-a.html
    This key should not normally be present if there are no installations in progress and it applies to Installer error 1500

  • ITunes and Quicktime 7 install errors

    Hi folks
    Had no probs with these programs at all until the v7 release. Been running Quicktime Pro and iTunes for a wee while on version 6. When I run the iTunes v7.07 installer I get "The installation of Quicktime did not complete successfully. iTunes needs Quicktime." and it quits back to desktop after that (windows xp pro that is).
    I've read some other posts about similar problems, so tried uninstalling itunes and quicktime completely, however, iTunes has gone, but Quicktime won't uninstall now. It's gone from Add/Remove programs, it's "Uninstall Quicktime" icon starts up an installshiel wizrd box then just disappears with no effect. I tried reinstalling the new Quicktime-only installer over the top, same problem...errors during install.
    So now, I can't install/reinstall an updated Quicktime, can't uninstall the Quicktime Pro I've already got, I have no iTunes on my machine any more and no way of getting it back on, cos the installer won't work without this Quicktime problem being sorted!! ARRRGGHHH!!!
    Any ideas folks? I've tried safe mode...Quicktime isn't listed under Add/Remove programs in there either. I'm thinking I'm gonna have to rebuild my laptop again...I spose it could do with a spring clean, though ideally I'd like to not have to!
    Cheers muchly in advance
    Lee
    Dell Inspiron 9100 laptop   Windows XP Pro  

    Hey l33bert,
    This article will help troubleshoot this issue: http://docs.info.apple.com/article.html?artnum=93976
    Make sure your logged in as an administrator and security software is disabled. Start at "Empty your Temp directory and restart" and continue down th earticle. It does link to the installer cleanup utility, that blackhillsjen mentioned, and shows steps on howto use it.
    some people also prefer to install from Quicktime stand-alone installer: http://www.apple.com/quicktime/download/win.html
    Jason

  • Track stuttering on playback in iTunes and Quicktime. Help!

    In iTunes and Quicktime, every track in my library stutters intermittently in random places on playback.  All tracks play perfectly on my iPod and in other media players on my PC eg. Win Media Player v11. I have tried all steps in article TS1362 (http://support.apple.com/kb/TS1362?viewlocale=en_US&locale=en_US). Additionally I have tried both my sound card and the motherboard audio codec... it happens with both. Any ideas please?

    it seems more like a stopping and starting.  the video clips look great in fcp, but bad in quicktime.  ken burns on stills is not smooth in fcp, but looks much worse in quicktime.  any suggestions? 

  • Fault with iTunes 8 and QuickTime - Network resource unavailable

    This is a similar query to one already found in the iTunes discussion pages however I could not see an answer there as to how to fix this without downgrading so I have posted here. I do not wish to downgrade, I would much rather get iTunes 8 working properly.
    My problem is as follows:
    I downloaded iTunes 8 (via Apple update) and once I had done so it both iTunes and QuickTime worked fine on my pc. However, after I turned my pc on again the next time (I have Windows XP Home Edition and Service Pack 3) and clicked the iTunes shortcut, I got the following message:
    "This action is only valid for shortcuts that are currently installed"
    I tried re-downloading and re-installing iTunes 8 and QuickTime (both manually and using Apple Update) several times and each time I got the following error:
    "The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package QuickTime.msi (or iTunes.msi) in the box below."
    I found the locations of the appropriate .msi files, selected OK, but was given another message:
    "The Path C:\Documents and Settings\username\etc cannot be found. Verify that you have access to this location and try again, or try to find the installation package QuickTime.msi (or iTunes.msi) in a folder from which you can install the product QuickTime (or iTunes)."
    This same thing happened when I tried to uninstall each program.
    At the moment, I have no functioning iTunes. I have also tried restoring my system but due to another unrelated issue with my OS, this did not work properly and I am still in the same position.
    Any help that anyone can provide would be most gratefully received.
    Thank you.

    It sounds as though things have got in a bit of a muddle. Usually removing iTunes and related programs and doing and installer file clean up fixes this:
    Download a fresh copy of iTunes and the stand alone version of Quicktime (the one without iTunes)
    http://www.apple.com/quicktime/download/win.html
    http://www.apple.com/itunes/download/
    Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program –All Programs>>Windows Install Cleanup
    http://support.microsoft.com/kb/290301/
    Now use the following method to remove iTunes and its components:
    XP
    http://support.apple.com/kb/HT1925
    Vista
    http://support.apple.com/kb/HT1923
    If you hit a problem with one of the uninstalls don't worry, carry on with the deleting of files and folders as directed in the method.
    When you get to deleting Quicktime files in the system32 folder as advised in the method, you can delete and file or folder called Quicktime.
    Restart your PC.
    Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
    Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
    restart your PC
    Install the stand alone Quicktime and check that it works.
    If it does, install iTunes.

  • I am traveling with my macbook pro and I forgot to install final cut express and quicktime pro before I left. How can I in a way download them for free on my laptop from where I am

    I am traveling with my macbook pro and I forgot to install final cut express and quicktime pro before I left. How can I in a way download them for free on my laptop from where I am? I need them and don't want naturally to buy them again!!!
    Thank you    

    Assuming you purchased QT Pro, you can always download it again at no extra charge by logging in to your Apple account.
    Regarding FCE, there is no way to download & install the product.  You need an original FCE install disk and your FCE serial number.
    Final Cut Pro X (aka FCPX) can be purchased & downloaded from the App Store.

  • ITunes and QuickTime will not work..Yeah, another one

    Despite my best efforts to try to solve my problem on my own and not both you kind people, I've been working on and off at trying to get my iTunes working, with no positive results at all. It's honestly been so long, I don't recall what might have sparked the issues, but every time I try to open iTunes or QuickTime they will begin to open but fail, bringing up the common windows error message:
    iTunes has encountered a problem and needs to close. We are sorry for the inconvenience.
    QuickTime Player has encountered a problem and needs to close. We are sorry for the inconvenience.
    So far, I have totally deleted both iTunes and QuickTime twice from my computer- first just through Add/Remove Programs pathways, then more in depth with Registry Crawler to try to remove any traces of the programs- all before re-installing the two programs. Both times have failed, still leaving me unable to open either program, so I've broken down and come here- hoping to find anyone willing to lend a hand to help fix this issue so that I can finally listen to my music the way I used to.

    Perfect information, thanks.
    That combination is almost always caused by some application stashing old QuickTime componentry down in your system files. (Codec packs and video converters are the usual suspects, although some Games might do it too.)
    Let's go looking for the old stuff.
    1. Open My Computer from the desktop or Start menu.
    2. In the Tools menu, click Folder Options.
    3. Click the View tab.
    4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected, and the "Hide extensions for known file types" option is unchecked.
    5. Click OK.
    Now in My Computer, open your C drive.
    Open the "Windows" folder.
    Open the "system32" folder.
    What files and/or folders can you see in there with QuickTime in the file/folder name? (In a standard installation of QuickTime, you should see precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

  • ITunes and QuickTime will not open

    I upgraded to iTunes 7.0.1 and the installation went fine. However, when I try to open iTunes by double-clicking on the desktop icon, a page pops up for less than a second and then goes away. I think the page might have something to do with a license agreement. I get no error messages. I also tried to open QuickTime to see if it works, but it does not. When I try double-clicking on the desktop icon, a page (different than the one that pops up for iTunes) comes up for less than a second. No error messages for QuickTime come up either. What can I do to get my iTunes and QuickTime to work?
    Dell Dimension 8200   Windows XP  

    ... i think i might have already replied to you in a different thread, BNT ...
    ... but just in case i haven't, those are classic symptoms of a Qoologic adware infestation on a PC. the free trial version of Ewido has been catching and killing that for most folks:
    ewido anti-malware download

  • Itunes and quicktime will not open properly

    My itunes freezes when opening and quicktime say there is a run time error. I have uninstalled everything and quicktime does not go away. then re-installed both and they still do not work. not sure what to do.

    I have uninstalled everything and quicktime does not go away
    what's the precise wording of the message that you're getting when you try to launch itunes?
    what is the wording on the message that you get when you try to uninstall QuickTime?
    (include error message numbers if you're getting any.)

  • ITunes and Quicktime Error after automatice Apple update, need help!!!

    So I currently have a new labtop with windows vista. I have been runining iTunes for the pass 3 months already no problems. The Apple automatic update has never caused any problems till now. Quicktime needed to be updated today, and I accecpted the update, prior to that iTunes and Quicktime was working properly. Once the quicktime update was complete, it restarted my computer like usual. Then when I tried to open iTunes this error came up:
    "iTunes cannot run because it has detected a problem with your audio configuration"
    Now I checked the audio configuration and nothing was changed or anything, that has not been touched at all, so I still think it had to do with the update. The next error was came up when I tried to open Quicktime and it read:
    "Runtime Error!
    Program C://ProgramFiles/QuickTime/QuickTimePlayer.exe
    This application has requested the Runtime to terminate it in an unusual way.
    Please contact the application's support team for more information"
    So as long as I have been using Quicktime and iTunes I have never encountered this, I tried to re-install but the error kept coming up after it was installed. Please help me out!

    try doing following the steps in these articles
    http://docs.info.apple.com/article.html?artnum=31115
    and
    http://docs.info.apple.com/article.html?artnum=93976
    hope this helps

  • Error Messages for iTunes and Quicktime, what do I do?

    Hello, I'm in need of some help.
    Let me walk you all through what I did for the last 4 hours:
    (important note: I suck at far too much computer stuff, so I am fully aware that as you read the following, at certain points I probably made the problem much worse than it needed to be, I am not proud of this, but everything you read did happen, stupid as it probably was for me to pursue the problems in the particular way that I did. Hindsight is 20/20.)
    I updated my iTunes v7.7 to v8.0 today, and after trying it out for a while decided that I didn't like it and wanted to go back to what I was using before.
    So, because I didn't know what else to do, I tried to re-install the original iTunes software that came with my iPod (a 20gig classic I bought in 2004). That version of iTunes was v6.0 (again, 3 years ago).
    Part way through the installation process, I got a message that said that, because I had a newer version of iTunes on the computer already, it wouldn't install the version on the disk.
    So I uninstalled v8.0, restarted my computer, and installed the v6.0 from the CD-ROM I had.
    It was then that I found I had NONE of the 6000+ songs in my iTunes window. I checked my computers files to find that they were still in the library, but my iTunes screen was completely devoid of all my music.
    So I tried to get it all back on the player. I discovered that by right-clicking "Play" for the individual files from the folders in my iTunes that they would come up on the player, but that meant that I'd be clicking in 6000+ songs, one by one, till they were all back. I didn't want to do that.
    So I tried a system restore (again, read "important note" at top of post). After that happened and I was looking at my desktop again, tried opening iTunes, and it gave me a message that said:
    "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience."
    And it asks if I wanna send an error report. I decline, then try opening Quicktime. Same message. So I try to uninstall both programs (i know, i know, "important note"), and iTunes uninstalls, Quicktime does not, because, as my computer puts it, "a fatal error occurs."
    But since I have iTunes uninstalled, I go to apples site and download iTunes v8.0 again. After waiting for all that to get done, I get the same error message.
    So I peruse this very discussion forum, and after looking for a good while at what is being recommended I go to a site and download v7.7 again.
    Again, I get the same error message.
    So here I am. I've tried working it out myself for the last 4 hours, and I seem to have made things worse.
    So please, please, PLEASE, I ask for any help you can provide.
    Can I get my iTunes back?
    Is my Quicktime corrupted now?
    Am I totally screwed?

    I had the same problem when I went to upgrade to 8 and then downgrade back to 7.7. To fix this is a little involved, but you can do it. Let me put it this way, I talked my mother through it on the phone, and she has a hard time finding the power button So no worries, I'll help you get back up and running. I am running Vista now, so I am going off of memory for Vista, so bear with me.
    I would do the following:
    1. Uninstall both iTunes and Quicktime by going to Control Panel-Add Remove Programs, and choosing first Quicktime then iTunes.
    2. Clean your registry. Easy now, it is not that hard. To do it, go to http://www.ccleaner.com/download and download CCleaner. It is free and has NO spyware. Install it and run the registry cleaner. It will remove any trace of both programs from the registry. Now you have 2 choices.
    3a. Now I would install iTunes 8. Because you already installed it once, it converted its database file that it uses to track the library and play lists up to the iTunes 8 standard.
    3b. If you have no problem loosing your playlists and library settings, you can go back to iTunes 7.7. To do this, first search for "itunes.ttl". To do this, go to Start-Search Files and Folders- and type in "iTunes.ttl" Once the search finishes, it will tell you where it is located. Navigate there using Windows Explorer or My Computer and delete it. Now you can install iTunes 7.7 with out any errors. You will not loose any files! just your playlists and it will not remember what is in your library.
    As far as adding your songs again, did you try to re-importing your music? If you go to the file menu-add folder to library. It will bring up a dialogue box that will allow you to browse to the folder with your music.
    Let me know if this works. I will help in anyway I can.
    Good Luck,
    linesma

  • When i try to update itunes and quicktime, it stops me and says " The feature you are trying to use is on a network resource that is unavailable" please help.

    when i try to update itunes and quicktime, it stops me and says " The feature you are trying to use is on a network resource that is unavailable" please help.

    Before trying the update again, use Microsoft's Fix it solution at http://support.microsoft.com/mats/Program_Install_and_Uninstall. Use it to uninstall iTunes and Quicktime. It bypasses this not uncommon problem. When the solution finishes, the selected program will be uninstalled. It can take several minutes and I have seen as much as half an hour.
    After iTunes & Quicktime are uninstalled, try the update again.

  • What is the difference between Wine, Wineskin, Winery and Wine Bottler, and how do I get Wine to *ACTUALLY* work in Mountain Lion?

    Ok, so this is my first post here and I am admittedly terrible at forums. Someone might say, "This was addressed in the ___________ thread by __________! Go read it!" --- that may be so but I've spent enough hours trying to google this problem into submission to no avail based on what is apparently working for others, so I would like a chance to get specific answers to specific questions that aren't from Mar 2011, etc.
    So first of all, I'm confused by all the various Wine programs/apps/whatevers. I've seen Wine, Wineskin, Winery, Wine Bottler, and at this point I wouldn't be surprised if there are even more than that. What's the difference between all of these and how do they work with one another? What do I actually need to get windows programs working?
    All of my google searches have led me to people giving out fish, but no one giving out fishing lessons. I'm not a pro at mac and windows and all that, but I'm a fairly bright individual who gets VERY frustrated, very quickly, when I don't understand the why and how of something I'm attempting.
    I've also found "answers" where the person attempting to help starts off helpful enough, but degrades into the most archaic of techno-babble after about 5-6 sentences. On the other hand, I've watched tutorials on youtube where the poster decides to skip (apparently crucial) sections of the tutorial, and mutters such gems as: "... you might wanna have to run Wine first before you can do anything, cuz I think it has to configure it and set up a bunch of stuff" 
    O.o
    A happy medium between techno-babble and the most basic of explanations would be ideal for me, and I'd imagine for others as well.
    Here is a summarized history of my relationship with Wine:
    Diablo II - I downloaded this awesome thing which ended up being... uh... I guess Diablo II in a Wineskin "wrapper". I'm not sure, all I know is that it's a D2 icon, and if I go to 'show package contents', it's got C drive, Program Files, et cetera inside of it. I double click it, it launches D2, and it works like a dream. <3
    'Vanilla Install' - That's what I heard someone call it. It was the command/terminal style install using xquartz and xcode found at http://www.davidbaumgold.com/tutorials/wine-mac/. I followed every instruction to the letter, and got all the way to '$ sudo port install wine', at which point it started going smoothly, free from the possible error he described regarding the installation of xcode, and then just failed after I left the room to use the restroom and came back. Please don't ask me to repeat what the error was, because honestly, after reading more things on the interwebs, I'm confused as to why it's even necessary to go through all of that, so I'd rather not try that route again anyways, rendering the error message quite possibly irrelevant.
    Wine + Wine Bottler - So I decided to try to seek out an easier method, as I know that one must exist that doesn't involve command lines. I found a video tutorial at http://www.youtube.com/watch?v=m0BBkISOcEA, and oh man would it be great if that method had actually worked. Again, I followed all instructions provided to procure my free fish, and at the point in the video where he declares that "xquarts or x11 will open" - it doesn't open. Nothing opens. I was trying to install Star Sonata, btw.
    So here I am, thoroughly worn out, frustrated at all the random places Wine is installed on my mac now, and just want someone to explain it all, from top down, without getting toooooooo technical on me. I know that might be asking a lot...

    ## I know that the poster has already found a solution, but the following is a possible answer for others that have similar issues.
    For Winebottler, just go to their website and download it. Run the program. Choose .wine as your prefix (best choice) or whatever suits you best. You'll need a functional X11. If you can't use the one that comes with your mac, download the latest one from the website.
    If your issue is one with Winebottler's Wine not running correctly due to X11, then you have a pretty ugly problem, although a simple upgrade is the best solution (Upgrade XQuartz.app).
    http://www.davidbaumgold.com/tutorials/wine-mac/#part-1
    The above website is the easiest way to get REAL wine on your computer. First of all, Wineskin WInery, etc. are NOT WINE. They are 3rd party apps that may use Wine or may have originally part of Wine, but they are no longer up to date with Wine. WineBottler is currently up to date with the stable releases of Wine (but not the maintenence releases).
    For the website tutorial and to run Wine on your mac without using a thrid party app, you will need to know a few things.
    First, you will need to know basic control of the command line. That means, sudo (you must know the administrator password to your computer), and the forms of cd (change directory).
    Second, you will need Xcode. Download 4.2 (stable) or whatever other versions you want, but beware: It is over 1 GB, and you will need time for it to work.
    Third, you will need to get MacPorts and configure it. The tutorial should have this data.
    When you download wine (use sudo port install wine-devel for the latest development release of wine), it will first download a lot of dependencies. This will take a while. After that, it will download wine itself.
    After obtaining wine, to run a program, open the terminal.app window.
    cd desktop/XYZ/ZYZ\ WRQ
    The above will first enter the desktop, then folder XYZ, then folder ZYZ WRQ. From here,
    wine th11e.exe
    Or whatever executable you are trying to open. (Using Subterranean Animism as my example).
    It should, in theory, run the program. Watch the terminal for errors. If there is an X11 problem, then it's not wine acting up. If the app crashes or has other issues, check the Wine Application Database to see if your app is compatible with wine.
    If you have any further questions or other things, feel free to reply; I may or may not get back to you, but there's a good chance that someone will come in eventually. Otherwise, the Wine Wiki should have some information.

  • ITunes and QuickTime doesn't open up on Windows Vista

    Hi! I will apreciate all who tries to answer this question.
    I have Windows Vista on my HP laptop and I dowloaded iTunes and QuickTime.
    I had no problem downloading it, but then opening it came a box.
    It said:
    iTunes has stopped working
    Windows can check online for a solution to the problem
    -> Check online for a solution and close the program
    -> Close the program
    View problem details
    Problem signature:
    Problem Event Name: BEX
    Application Name: iTunes.exe
    Application Version: 10.1.1.4
    Application Timestamp: 4d06bba9
    Fault Module Name: StackHash_fd00
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 00000000
    Exception Offset: 00227d80
    Exception Code: c0000005
    Exception Data: 00000008
    OS Version: 6.0.6002.2.2.0.768.3
    Locale ID: 4105
    Additional Information 1: fd00
    Additional Information 2: ea6f5fe8924aaa756324d57f87834160
    Additional Information 3: fd00
    Additional Information 4: ea6f5fe8924aaa756324d57f87834160
    Then I press close the program and a speech bubble appears at the
    bottom right corner of the screen.
    It said:
    iTunes was closed.
    To help protect your computer, Data Execution Prevention
    has closed iTunes.Click to learn more.
    I have no idea whats hapening.
    HELP!

    excellent information, sparkly.
    Fault Module Name: StackHash_fd00
    Fault Module Version: 0.0.0.0
    ... and:
    To help protect your computer, Data Execution Prevention has closed iTunes
    ... and the QuickTime Player not launching either (it's a "QuickTime has stopped working" error?).
    With that combination, we need to check on some other application (apart from QuickTime itself) stashing old QuickTime componentry on the PC in an unorthodox location. (Codec packs and video converters are the usual suspects with that, although some games might do the same.)
    So we'll go looking for the older QuickTime componentry in the most common locations for it to be stashed.
    First we'll need to change some view settings.
    In your Start menu, open Computer.
    In your Organise menu, select Folder Options.
    In the View tab, make sure that "Show hidden files and folders" is selected, and "Hide extensions for known file types" is unchecked.
    Click OK.
    Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
    Open the "Windows" folder.
    *If you have a 32-bit version of Windows,* open the "System32" folder.
    *If you have a 64-bit version of Windows,* open the "SysWOW64" folder.
    What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

Maybe you are looking for

  • Facetime no longer working with mavericks

    I've used facetime for a while now to talk to family out of the country. Since I've upgraded to mavericks I can't log in with my apple id and password (which are both correct as I can log in to app store with them). Facetime cycles between log in pag

  • Hotspot on more than one fields in ALV Report

    I want to add Hotspot on more than one field in ALV,   one field is Vbeln , one is BSTNK, one is matnr and so on. i have used form user_command.and have written coding for Vbeln (on vbeln i am showing transaction VA02) i want to pass an eror mesaage

  • Oracle Update Problem

    Hi, I have updated my Oracle 10g (running on Windows XP) from version 10.2.0.1 to 10.2.0.3 and now I am trying to execute the patch: 6430171that solves several bugs. The problem is that when I run the Opatch application I get the following error: Mic

  • In itunes, how to expand a window under Devices?

    In itunes, under Edit-Preferences-Devices-Devices Preferences the window does not open fully and cuts off words along its left hand margin. Therefore, I cannot check the box that says disable automatic syncing. How do I correct this?

  • S920 problems

    I have been unable to send or recieve picture text messages but i can send and recieve unattached messages.i have contacted my service provider who says sim is fine as is the APN -they think the  handset may have a block- can anyone help?