Win: ExtendScript Tool Kit 2: Can't connect to Indesign CS3 Debug

Hi
I have a script for Indesign CS3 and like to debug this in ExtendScript ToolKit 2. But I can't connect to Indesign CS3 Debug.
- I start Indesign and try to debug the script -> A message is show to start Indesign CS3. If I say yes, a message is shown that Indesign CS3 is loaded... But this message remains on the screen
- The same if I don't start Indesign CS3 manually.
- If I try it with Illustrator or Photoshop (both release versions) it works!
What could be wrong?
Thanks
Hans

Hello,
I have exact the same problem with soundbooth. And also that extended script is working fine with photoshop. I have tested it on 4 different computers. Updated windows to sp3, and updated all adobe software.
So it's definitely not a mess in the system (beside the mess of software 1,2 Gb you have to install for only soundbooth!!, Cool edit pro, which adobe took over from which soundbooth is a spin off, was only 20Mb....)
The technical help form adobe won't look at this if you don't buy the software first. But after some pressure they looked at the problem but couldn't find anything about it in there system.
Please advise how to solve this
Richard

Similar Messages

  • Drive 2.1 can not connect to our cs3 versioncue server what do I need to use our projects in CS5?

    Mac XServe is our CS3 server. Trying to upgrade to CS5 and found out Version Cue is no longer. Read and found the Drive 2.0. It can't seem to connect to my current server. We still have access with one of our CS3 machines. Is there a program I need to get to continue on with our versioning and the ability to use our projects we have? Or do I need to go into every project and export or something to be able to start using CS5? Thank you in advance for any help!!!

    sunnovagun!
    Hitting the Log Out button in the MobileMe panel worked. I can now connect to both the SnowLeopard and Lion servers just like I used to.
    My condition appears to have been slightly different from yours, gmia - the MobileMe on my MBP had the correct info, but hose are not the credentials i use to remote to the two servers. I'm guessing that for some reason ScreenSharing began using my MobileMe credentials instead of what I had saved in the keychains.
    Wonder if it had anything to do with the shutdown of the MM servers. That would be odd as using ones apple ID to log into a Mac remotely was new with Lion, and I had the same problem with our SnowLeopard server - which I remote into much more frequently.
    Probably didn't hurt though to reboot the entire network...

  • Can not scroll in Indesign CS3

    I am new to InDesign and I find this very frustrating. I can not use my scroll when I am in InDesign CS3 at certain times. Once I loss the capabilities, I have to close the document and reopen it. I can scroll while in other programs like illustartor and photoshop, internet explorer, but not indesign.
    I am on Windows XP and have a Microsoft wireless laser Mouse 5000. The mouse works in other applications.
    Thanks for any help!

    You might try looking for another mouse driver. This was a common complaint in CS2, but less so in CS3. My Logitech mouse won't scroll in Illustrator, but you say yours will. Go figure.

  • Can not I develop InDesign CS3 plug-in on MAC OS X 10.6?

    I notice that InDesign CS3 requires xCode 2.4.1. However, i can not install xCode 2.4.1 on MAC OS X 10.6, it requires 10.4.

    Which version of MAC sdk you are using? 10.5 or 10.4u? The CS3 projects are generated on 10.4 or later version?
    I tried to use xCode 3.2 on MAC 10.6 to build the projects generated by xCode 2.4.1 (MAC 10.4), but got lots of errors saying can not find include header files.

  • Beside Integration Kit, what other tools or methods can I connect BO to BW?

    Dear Experts,
    Apart from Integration Kit, what are the other SAP tool(s) or method(s) can I use to connect BusinessObjects XI rel 3.1 sp3 to Netweaver BW rel 7.01 ?  Are these tool(s) or method(s) proven to be more effective than using the Integration Kit?
    Please let me know.
    Thanks,
    Anthony

    Try to evaluate what option of BEx queries called "Allow external Access to this query".
    But I would prefer standard SAP approach which is via integration kit.... What is background that you thinking about sth else?

  • IdeaPad S205 Operating System:Win​dows 7 Home Premium can't connect to wifi router

    Hi I have set up laptops at home before,
    the brand new lenovo ideapad tells me "connections are available" and i can see my wifi has 3 bars - all good
    however after enering the the network security key and click ok 
    it says connecting then a second later it says,
    windows was unable to connect
    i have tried all the recommended advice rebooted the router and the laptop and updated the driver software, however i am unsure if it was ythe most current or if in fact it did anything...
    what else can i do?

    Richiebee,
    Do you have other PCs connected to this router and are they running Windows 7?   What brand and model of router?
    If you take your S205 to another location - a coffee shop, etc, are you able to connect wirelessly there?   Perhaps we can try to narrow down the possibilities a bit?
    Thanks!
    Mark
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • (on Snow Leopard) Can't open a Indesign CS3 document by clicking an icon!

    I just install Snow Leopard on 3 Mac today and they all have the same problem now. We can't open an CS3 Indesign document by double clicking an icon. We have to go into the tool bar (open--» document).
    When I try by double clicking, this window now appear :
    http://i16.photobucket.com/albums/b48/avanos68/Capturedcran2010-01-12171102.png

    Just for your information.
    Rorohiko Ltd. has just released a new version of Soxy, which lets you do just this.
    If you don't know what Soxy does, here is a brief description:
    There’s a common problem when there are multiple versions of applications like Adobe® InDesign®, QuarkXPress®, Adobe Illustrator®… installed on the same computer.
    Double-clicking a file’s icon will often cause the wrong application version to launch. As a result, you might unwittingly re-save a document into a more recent file format, which could be a bad thing. Maybe it’s a customer file, and the customer might not be able to open the updated file when you e-mail it back to them.
    Soxy acts like an interceptor when opening documents and redirects the files to the appropriate applications of your choice.
    Our latest version has an option in the preferences that lets Soxy override the Finder's behaviour when there are '#' characters in an InDesign file name.
    You can download our latest version of Soxy from the Rorohiko website:
    http://www.rorohiko.com/soxy/

  • Can't impose my InDesign CS3 document

    Hey gang,
    I miss InBooklet.
    I used to be able to impose to a new InDesign document. In CS3, I can't.
    I now must use Print Booklet to make an imposed output. But that forces me to print to Adobe PDF; thus rasterizing the resulting PDF.
    Is there an alternative plug-in?
    Waah!
    Mike Witherell in Washington DC

    Hey Bob,
    >The stock question is still...Why would you want an imposed InDesign document?
    It is really for the office user; not the commercial printer. They want to take the job to impose, print, fold, and finish ... themselves. Or else, they simply want to make a dummy copy to supply with the files to the commercial printer. Nowadays, you know, you can make color-accurate dummy copies. Your inkjet or Xerox can do faithful color equal to the inkjet proof the printing company is going to hand back to you.
    Peter, you can parse it fine, if you want, but in CS3, I have fewer options than I had in CS2. Going forward, I want more, not less. And there is always the "odd" scenario out there, even if most of the time it doesn't make a difference.
    Mike Witherell in Maryland

  • Can't package in Indesign CS3

    Hello,
    i'm a graphics art designer and i use indesign CS2/CS3 every day at work.
    I've encontered a problem that i don't know how to solve so i decided to come here and try my luck on getting some answers.
    I have lots of documents that i created in ID CS2 version. Due to necessity, my boss ungraded my software to CS3 and since then, i've started my documents on CS3 or converted my earlier documents to CS3 version. That's when the problems arrive.
    All the documents that were previously created in CS2 give my an error message when i open them in CS3.
    I open de document anyway and work with it with no problems. When i finish my work i usually package everything to keep things organised and that's when i have the error:
    And IDCS3 simply just don't package. I have no way of either install or activate this plugin.
    Is there any way that i can remove this plugin that seams to be "attached" to my document in order that i can package my documents???
    Thanks.

    I exported my CS3 document as .inx, opened again in CS3, resaved it and the packaging problem disapeared.
    Thanks a lot Cindy!!

  • Where can you find free InDesign CS3 templates for newsletters, or free editable examples of good newsletters in the InDesign format?

    I am looking for free newsletter templates or free editable examples of good newsletters made using InDesign CS3.  Anyone know of a great spot for finding these?

    That would make sense if it opened a template folder but it opens the most recent Bridge folder I had open.
    Edit: Just tried it again and the template folder came right up. Thanks.

  • HELP!!! Can't uninstall expired indesign CS3 trial...

    I'm running Vista, I tried "uninstall/change" from the programs and features control panel, I get this error: "component removal failed". I downloaded and ran the indesign update because apparently there were some patches for the installer... But that didn't work either, I'm still getting the same error.
    Any help would be greatly appreciated, thanks in advance.

    If that doesn't work, you might want to try the CS3 Clean Script, which is designed for removing beta & prerelease versions, but would probably remove the trail as well. Be careful, though, because it will probably also remove other Adobe products you might want.
    http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402767&sliceId=2
    Peter

  • How to download LabVIEW Full Development System 7.1 and tool kit

    I want to get the "LabVIEW Full Development System 7.1 and tool kit", Where Can I download it from?
    TIA

    LabVIEW 7.1 is ancient, LabVIEW 2011 is current. There is more than one "toolkit". What did you have in mind, exactly?
    You can donwload an evaluation version of LabVIEW 2011 from here. Is there any specific reason you want to use 7.1?
    If you have a valid license for LabVIEW 2011 you should be able to use it also for older versions. Contact your local NI representative. Are you on SSP?
    LabVIEW Champion . Do more with less code and in less time .

  • 11i Install & MKS Tool Kit

    Is it still possible to download a free copy of MKS tool kit.
    Can I install 11i without it?
    Thanks

    I dont know a way to get a free download of MKS. Essentially it seems to be the Unix environment (or at least the utilities) on Windows -- meaning it will load ar,ld,cc,make which are used in an Unix environment. It seems like Oracle uses these to link the executables.
    So getting the MKS might not be the only answer as long as you can get these utilities on your machine and be in the PATH. I think redhat also has the environment to emulate Unix on Windows. I have not tried it so am unsure if it will contain the four specific utilities the installation seems to use. Try download at www.redhat.com for this utility.

  • Adobe InDesign CS4 Debug WIN Installation

    I need to port an InDesign CS3 plugin to InDesign CS4. In order to do that I've installed the Adobe InDesign CS4 Debug WIN but when I'm trying to start the application I receive the following error message in German: "Diese Anwendung konnte nicht gestartet werden, weil die Anwendungskonfiguration nicht korrekt ist. Zur Problembehebung sollten Sie die Anwendung neu installieren.". In english this should mean something like "This application has failed to start because the application configuration is incorrect. Try to reinstall the application.".
    The box I've tried installing on has visual studio C++ 2005 SP1 and InDesign CS3 Debug already installed (which works fine). I've looked through the requirements in the "InDesign® CS4 Read Me" and couldn't find anything that I'm missing.
    Any ideas?
    Thanks in advance.

    Hi Folks,
    ID CS4 Debug and ID CS3 Debug can be installed on the same system. The likely reason that the CS4 version is giving that error is because the CS4 version needs some Visual Studio 2005 SP1 DLLs that aren't installed on the computer.
    I believe that there are a couple of ways to fix this. One is to install Visual Studio 2005 SP1 (the recommended setup for CS4 plug-in development). When you install SP1 the DLLs needed by ID CS4 Debug will be installed. The other way, I think, is to not SP1, but install the release version of ID CS4 on your system. I understand that the ID CS4 Release version installer will install the DLLs needed by the debug version.
    However, if you use VS2005 (no SP1 installed) for CS4 plug-in development you will not be using the recommended development environment for CS4. But if you install SP1, and you want to develop plug-ins for CS3, you will not be using the recommended development environment for CS3 plug-in development. Go figure.
    Please note that once you install VS2005 SP1, any plug-ins that you compile will be looking for the SP1 version of the C/C++ Runtime DLLs when the plug-in is launched. The needed DLLs will be on your development system, so everything will seem fine when you test your CS3 plug-ins on your development computer. But when the plug-in is launched on a machine without the SP1 DLLs installed, the plug-in will not run.
    I'm not sure of the best way to deal with this (I'm mainly a Mac guy), but there was a thread here entitled
    Visual Studio 2005 SP1 about this issue a while back. This thread was partially deleted due to a forum software problem, and one of the ideas that was mentioned was lost from the message thread. Below are the useful (IMHO) missing messages (sent to me by Dirk Becker), who follows the forum using email.
    [Ugh! I told Dirk I would write up a Wiki entry for this, but work happened and I haven't gotten to this yet. :-( ]
    =========
    MISSING MESSAGES FROM THE THREAD: "[IDCS3 WIN] Visual Studio 2005 SP1"
    =========
    FROM: Eugenio Andres
    Hi Jim,
    From your original error message, the problem is most likely with the installation of the C/C++ SP1 runtime DLL on the machine that does not have the compiler. It's not so simple nowadays as copying over the DLLs, because Microsoft invented the side-by-side system, that allows having several versions of the same file on one machine.
    Your options are installing the runtime on each machine (a package for that is available from Microsoft Download) or changing your project to the static runtime ("Multithreaded" instead of "Multithreaded DLL"). I always use static linking in plugins with no problems, although Adobe specifies dynamic in their instructions, but you avoid these "DLL hell" problems.
    Regards,
    Eugenio Andres - www.ExpertosInformaticos.com
    =====
    =====
    FROM: Jim Birkenseer
    Hi Eugenio,
    Thanks for the information.
    So, are you saying that I simply have to go into my Plug-In's property page in VS2005 SP1 and change the C/C++ Code Generation from Multi-threaded DLL (/MD) to Multi-threaded (/MT) and rebuild the project? What are the downsides of doing this--or are there any?
    <...SNIP...>
    -- Jim
    =========
    =========
    FROM: Eugenio Andres
    Hi Jim,
    You're welcome.
    Yes, that project change should do it. The difference is that with the "DLL" version, your plugin loads the C/C++ runtime shared library (DLL) at runtime and calls it for any needed functions (like strcpy, malloc, etc.). Without the "DLL", the linker puts the C/C++ runtime code directly into your plugin and you don't need the C/C++ runtime SP1 DLL (the error you're getting is because your plugin required the DLL and it's not found on that machine).
    The C++ SP1 runtime shared library is different from the C++ non-SP1 library InDesign uses. In this new Windows "side-by-side" scheme, both can live together.
    If you use the exact same C/C++ runtime that Adobe uses, then that library is physically shared and it allows to do some "risky" things as e.g. allocating memory in one module (e.g. InDesign) and freeing it in another (e.g. your plugin). But this is usually not recommended and I don't think Adobe is doing it (but then it's only my impression from the code structure).
    Anyhow, from the moment you use the SP1 compiler, you're not sharing the runtime any more with InDesign, so it doesn't matter if you compile "MultiThreaded" instead of "MultiThreaded DLL". The difference between these is the size of the plugin and the easyness of distribution, and without DLL you miss possible "automatic" updates of the C++ runtime DLL (because the C/C++ runtime code is embedded in your plugin), but lately new versions of the C/C++ runtime become "different" DLLs, as you can see, so that's not so relevant any more - or if it's critical, you can always recompile your plugin and redistribute if needed.
    You can find a brief description of SP1 in
    http://msdn2.microsoft.com/en-us/vstudio/aa718695.aspx
    It looks like minor non-breaking changes to me, but one never knows...
    Cheers,
    Eugenio Andres - www.ExpertosInformaticos.com

  • How can I transfer photos from my comp to my ipad2.I have the connection kit and can transfer photos that are direct from camera BUT if I transfer photos from comp to card it will not recognize them ????

    how can I transfer photos from my comp to my ipad2.I have the connection kit and can transfer photos that are direct from camera BUT if I transfer photos from comp to card it will not recognize them ????

    To sync photos from a Mac or Windows PC to your device using photo applications
    Make sure you have the latest version of iTunes installed.
    In iTunes, select your device's icon in the Devices list on the left.
    Click the Photos tab.
    Choose "Sync photos from."
    On a Mac, choose iPhoto or Aperture from the pop-up menu.
    On a Windows PC, choose Photoshop Album or Photoshop Elements from the pop-up menu.
    Note: Some versions of Photoshop Album and Photoshop Elements don't support collections. You can still use them to sync all your photos.
    If you want to sync all your photos, enable the option for "All photos, albums, events, and faces." If you want to sync photos from only some albums, events, or faces, enable the option for "Selected albums, events, and faces" and then select the albums you want. If syncing on a Mac with iPhoto version 6.0.6 or later, you may enable the option to "Include videos" to sync videos directly from iPhoto to your device. (Requires iOS 3.0 or later).
    Click Apply.
    To sync photos from a folder on your hard disk to your device
    Drag the images you want into a folder on your computer. If you want images to appear in separate photo albums on your device, create folders inside the main folder and drag images into the new folders.
    In iTunes, select the device icon in the Devices list on the left.
    Choose "Sync photos from."
    Select Choose Folder from the pop-up menu and choose your main image folder.
    Click Apply.

Maybe you are looking for