Win Key Combination in Remote App

Hello. For some reasons i should run RDCMan (remote desktop connection manager) in remoteapp session. But I've got the situation that Win-Key combination are not being redirected to rdp session, because they are not being redirected to remote app session.
Standard rdp client (mstsc) has settings to redirect win-keys but i could not found same settings for remoteapp.
Is there any way to make Win-Key combinations redirected to remote app session? Thanks.

Hi pawellrus,
The remote app only include these settings :
Since there is not a keyboard option here as mstsc showed ,I am afraid this function is not supported by remote app .
Best regards

Similar Messages

Apple Remote App or Home Sharing won't work on iPhone or iPad with iTunes (Win 7)

Hi,
After I updated my Remote App (version 4.0) on my iPhone 5 (iOS 7.0.3) and iPad-3rd generation (iOS 7.0.3) and updated my iTunes (Version 11.1.3.8) on Win 7, I no longer can get Apple Remote App to work or my Home Sharing to work with Music/Videos for shared library.
I've followed every step in troubleshooting for Remote App (http://support.apple.com/kb/TS1741) with system requirements, proper iTunes settings, Home Sharing setup, Network connections, restarting the network router, and checking firewall settings. I've also done every setp in troubleshooting for Home Sharing (http://support.apple.com/kb/TS2972).
I've done multiple combinations of signing out on both iDevices and iTunes with Home Sharing, turning them on in different orders, closing and re-opening the apps and iTunes, restarting the iDevices and my computer. No matter what I do, nothing works.
I've even tried taking my computer and iDevices with me to different routers (work, home, friend's house, etc.) to see if it was a router problem, but no matter what I do it will not work. I am looking forward to getting an Apple TV soon, but if these problems persist, the outcome of that possibility is unlikely.
Are any of you experiencing problems like this? I could really use some help.
Thanks for all your support.

I just ran iTunes Diagnostics (Help --> Run Diagnostics... --> "Check" Network connectivity tests).
I found this:
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
I checked my Firewall settings (Windows Security Essentials) one more time, and it IS enabled for Home/Work (Private) and Public.
I think I'm going to uninstall and reinstall iTunes and see if that helps.

Remote App missing some keys

I am using the remote app and I have to enter my iTunes password to purchase a movie, the problem is that some of the keys are missing on my remote app, this is on my iphone and my iPad. I am missing the Parenthasis keys. Both open and close. They are present on all other iphone remote functions, such as searching for movies, both in the iTunes Store and Netflix, but they aremissing on the remote app when trying to enter the iTunes password when ordering a movie. I also notice that when using the keyboard function and pressing the (123) button on the bottom left, the middle and lbottom rows do not change characters. See the two screen print that are attached.
WIth the 123 button pre
Now when I try to push the symbols button on the left side, the second row stays the same.

It will go back to the alphabet keyboard. It strange that it happens on both iPhone4 v4.3.3 and iPad v 4.3.4, although the iPad is slightly different in the way the screen reads. Once again, it seems to work fine on other text entry screens, I only have this problem when trying to enter the password to purchase a movie. Maybe you can try to duplicate and see if you have the same thing when you go to enter the password. I don't know if a lot of people use special characters like I do for my password. See if the bottom 2 rows change when you push the #+= button. You don't need to complete the purchase or even enter anything, just check and see if it changes.

Typing in remote Control when changing language with key combination of Alt + Shift some time change to Upper Case and Caps Lock is off

let me first say that this links dos not apply to my problem the first one is :
http://social.technet.microsoft.com/Forums/en-US/winserverTS/thread/46b24b68-debf-466e-a780-66a3b999724c
and it dos not apply because I dont use remote app, and also i able to change settings
http://social.technet.microsoft.com/Forums/en-US/winserverTS/thread/6a0f0eda-d3f6-4cd9-91ef-a7e0b20bc799/
this one has similar problem but he working with remote app and do not have the Upper Case and Caps Lock is off
http://social.technet.microsoft.com/Forums/en-US/itproxpsp/thread/f978e234-2b3c-4780-9dda-bec52b25330d
this one using XP i have it on windows 7 connecting to remote server 2008 r2
here is the issue
my users remote control a terminal services farm, now when they changing language to English some time it change to English Upper Case and caps lock is off ! then the Alt + Shift and the go back to English lower case and if they just play with
this (i mean they just use Alt Shift over and over to try to get back to normal state when you hold shift and alt and you change to English and back to Hebrew if you hold the alt shift one more time )
i tonic some thing strange ifi hold down first the alt and then the shift this issue happen more often
i upload a video on this showing the problem live on my dropbox :
https://dl.dropboxusercontent.com/u/103434771/meditowers/IMG_0245.MOV
here is how the normal setting should be
Alt + shift need to change to lower case English
then Alt shift one more time will go back to Hebrew
now if you hit on the caps lock you will be in English all the time with Upper Case

Hi Yitzhak,
Please refer to this post:
www.davidbond.net/2012/10/rdp-shift-key-gets-stuck.html
This post includes fix to this issue at the comments.
Netanel Ben-Shushan, MCSA/E, MCTS, MCITP, Windows Expert-IT Pro MVP. IT Consultant & Trainer | Website (Hebrew): http://www.ben-shushan.net | IT Services: http://www.ben-shushan.net/services | Weblog (Hebrew): http://blogs.microsoft.co.il/blogs/netanelb
| E-mail: [email protected]

Remote app in combination with ipad music app

Hi
Can i stream music from itunes to my ipad with the remote app
In fact i'm looking for an app from which i can remote control itunes on my mac mini
and stream music to my ipad, using the same library or shared library and same app
During music discovery nights with a friend
I want to prelisten to the music with the ipad
And after the correct selection i have to swith to the remote app to play the selected song on my mac mini
I constantly have to switch between remote app and ipad music app
Which is very annoying because
- remote app looses his connection after every switch between the 2 apps
- i then have to go through the complete music library again till i have the track that i wanted to play
- and many more
Also that music app has changed since a while and doesnt offer me the same comfort scrolling through my music
I recently discovered plex and its ios app
In that app we can click on the track we need and it gives me the choice to play it on the mac mini or the ipad
Which is a really cool feature
But, ..., it doesnt have any search possibilities
In every app i tried there is always something missing to make it raeaeaeaellllllyyy eaeaeaeassssyyyyy
Isnt that what technology is supposed to offer us, make ite easy and confortable
Grrrrr
I googled for a while about it
Found no defenitive answers yet

How I wish that the Music App on my iPad could work as fast and as sleek as the Remote App when connecting to my (VERY LARGE) Library.
Even with version 1.0, every time I had to connect to my Library, the response time was just a few seconds before I can see and scroll thru my Albums/Artists/etc (with Album Art and all).
With the Music App, I haven't being able to connect to my shared library since iOS 4.0 :-( And the limited times when successfully connected the response time was JUST awful.
Please 'Remote App Team' have a beer or two with the 'Music App Team' and share your expertise with them!!! I'm begging you!!! Or at least 'tweak' your App so it can stream the music to the iPad, so we can enjoy our shared libraries on it.
Today... After updating to iTunes 11, I ( 've ?) tried to connect the Music App to my Library via Home Sharing without success. So.. Again.. Please Apple, DO SOMETHING ABOUT IT!!!
Thanks!!!

ITunes and iPhone 'Remote' app, only plays one song at a time

Using iPhone 'Remote' app to control iTunes on Mac. I click on Albums, select an album, select the first track, it plays and then stops and goes back to the albums list. I've tried every conceivable combination of the little icons for Shuffle and track repeat, nothing changes this, it always plays just the track and select and then it's done, it goes back to the tracks list. I've spent hours researching this and cannot get it to work. Thanks for any help.

Hi, although unchecking tracks is one way to manage what gets put on your device it has other side effects that make it less effective than the use of selected playlists. I generally use unchecking for marking tracks I'd usually want to ignore, such as bonus interview tracks on an album, or podcasts that aren't compatible with my device.
It is much easier to use playlists rather than check boxes to manage the content. There is no need to make a series of ad hoc playlists however. You'll need two, one of which you can throw away later. Create a new smart playlist with the rules *Playlist is Music* and the option *Match only checked items* ticked. Call it Checked. Now create regular playlist and call it, for example, Sync. Select all the tracks in Checked (cmd-A I think) and drag them into Sync.
Now you can go to your main music library and cmd-click on an empty checkbox to check all of your tracks so the unchecked behaviour no longer interferes with playback. Change your sync options so that the device syncs with your new playlist. In future you can manage the content by adding and removing things from this list instead of checking and unchecking them.
tt2

Remote app on ipod fails to connect to itunes 10

After upgrading to iTunes 10, my remote app on the ipod touch 4G fails to connect. I've reauthorized, which times out most times, but eventually when it works, it only continues to connect to iTunes until I close and restart the program. I've disabled all firewalls and still have the issue. iTunes 10/iPod Touch 4G/iOS 4.1/ancient remote.app do not play well together.
Anyone else unable to get the remote app working reliably with this combination?

Hello all,
I would like to get more details from people who are still having trouble getting Remote 2.0.1 to connect. If you are unable to connect, please email me <[email protected]> with the following information:
- A detailed description of the specific issue you are seeing.
- What OS is on the host computer? (the one with iTunes on it)
- What OS is on the affected iOS device(s)?
- A description of your network topology. Please be as detailed as you can, including hardware and firmware versions, if possible. Also please explain how everything is connected.
- Is the base station running default settings, or do you have any non-standard settings enabled? If so, please elaborate.
- Do you have the built-in firewall enabled on the host computer?
- Do you have any other firewall or Internet protection (anti-virus, etc) installed on the host computer?
- Were you able to connect with versions of Remote prior to 2.0?
- If you have multiple computers, can you get Remote to connect to any of them?
- Does Home Sharing work between computers on your network?
- Do you see any messages in Console (in Applications/Utilities) on the host computer that seem to coincide with the connection failures?
Thanks,
Roy
<[email protected]>

Remote app on iphone with Itunes library / Erratic connection problems.

I have been using Remote app on my Iphone to manage Itunes for months with 100% pleasure and 0 trouble.
For a few days, it has some erratic behaviour like having difficulties to connect to my Itunes library.
In such case if I touch the Change Library button on Iphone remote screen, it connects quite instantly...
I have a simple wifi network generated by my adsl box and a single computer.
The remote setting option "stay connected" on Iphone is On.
Generally when I get connected if I quit remote on Iphone and restart it within a minut it will find the library in a jiffy most of times ... but sometimes not.
I disabled firewall : no change.
I scratched all remotes in Itunes and paired the Iphone again : no change.
Does anyone with some idea ?
Thanks in advance.
Jean.

Almost the same issue here. And this only started yesterday.
Initially iTunes would not pair at all, but I went into add/remove programs (Win 7 PC) and ran a repair on Bonjour, Apple Mobile Devices, and iTunes. I did not remove or reinstall any of these applications.
After this my iPhone remote app would be found by iTunes, the passcode accepted, plus the library showed up. I thought I'd cracked it...
But after a few minutes - usually when the screensaver kicks in on my PC - my iPhone loses connection to my library and WILL NOT reconnect unless I restart iTunes.
I have to say that over the years the remote App is without doubt THE most buggy, inconsistent and erratic piece of software I have ever used. If there was a decent alternative I'd have ditched it a long time ago.
Looking forward to a solution from one of the experts here (not expecting Apple themselves to even respond!).

Unable to pair Apple Remote App with iTunes

I am running a Toshiba Satellite L505D-S5965 with Windows Vista SP 2. My iTunes software is 8.2.1.6, and my iPhone 3GS is running OS 3.0.1 (7A400). Both the Satellite and iPhone are connected to the same WiFi local network, and yet the App "Remote" by Apple Software is unable to communicate with iTunes to allow the entry of the four digit code to establish control of the iTunes library. Shortly after purchasing the iPhone 3GS I purchased the Satellite, but in the couple of weeks between the purchases the Remote App worked fine on my Gateway running Windows XP SP2. I have been through Apple Telephone support twice, and have really run one of the technicians through the mill researching possible solutions. I have visited an Apple Store Genius, who could find no reason for the problem. The iPhone and Remote App worked perfectly well on the store's WiFi and Mac, but his iPhone also wouldn't work with my laptop. I have been through Kaspersky's technical support system to ensure that there isn't a firewall issue. They have assured me, after reviewing logs from my laptop, that this is not the case. I even went so far as to uninstall all my Kaspersky product, but the Apple Remote App still would not function properly. I have updated the router's firmware, and checked that the laptop's wireless card is running the latest driver. At this point I can't think of anything else to try but would really appreciate any suggestions. Thanks, Steve

Monday 7th Jan.
Just to say that Apple did call me this am to discuss the problem on foot of a call I made last week.
In the meantime the remote worked with both a 2007 IMac and a 2009 laptop but not on the m-mini.
When I tried pairing this morning during the call by pressing Menu and next together it paired.
The change is very subtle, it just says paired in the advanced section of the security et sl section as referred before, with a fleeting 2 intersecting rings icon.
The big difference is that Front Row is gone....
The remote only works to a limited degree within some apps such as iTunes and iPhotos.
In theory it controls the volume in iTunes but as of now for me it doesnt....:( need to look more.
As to what the problem was:
It seems there is a set of keyboard combinations that can be used to force a reset the ID of the remote, the suggestion is MAYBE that by getting it to work on the iMac and laptop in some way reset the ID.
This stuff is WAY beyond my skill level:)
I did impress upon Apple the need to look at the issue in threads like this....
Message was edited by: qazxsw52

ITunes Remote app on Ad Hoc network (Windows 7)

Is it possible to use the iTunes Remote to control a computer that is using a wireless card to create an "Ad Hoc" network. I plan on building a computer for storing my Apple Lossless files on a Windows 7 machine and using it strictly for playback as a standalone device. I will be pairing it with a USB DAC & Headphone amp combination.
I either need to buy a monitor (not wanting to do this) or find a way to be able to navigate my iTunes library from this machine without a screen (prefered). I will NOT have an internet connection at work where I will be using this, however I could purchase a wireless card to install in this itx machine to create an ad hoc network provided I could then use the iTunes Remote app to control playback and view albumn art, etc.
Is this setup possible, or am I chasing a dream?

I have the same problem. How did you fix this?

Using Remote app on iPhone 5 without a separate internet connection and wifi router.

Hi,
I need to be able to control iTunes within my MacBook Pro remotely. Using my mobile broadband service and wireless router I've been able to get the Remote app to allow my iPhone 5 to do the job nicely through Home Share. So I went and bought a separate WiFi router and tried to do the same thing. Of course when it didn't work, I discovered that I need an internet connection and WiFi network to make the Home Sharing work.
So I got to thinking, can I create a WiFi hotspot using the Personal HotSpot functionality of my iPhone, set up Home Sharing on phone and MacBookPro and then use the Remote app. Ideally this would work as it seems all the key components are in place.
The MacBook Pro accepts the iPhone hotspot as a means of Home Sharing, however the iPhone won't use the personal hotspot to Home Share and I can't connect to the iPhone personal hotspot on the iPhone itself.
Does anyone know how to make this work for me? It would be such as neat solution if I can get it to work - not to mention the potential to save me about $200 (I need to set this model up for two people).
Cheers
Kathy

Same trouble here, iPad 2 with latest OS and remote app, iPod with latest OS and app.

Remote App cannot control Radio – Continuously displays loading message

Been having this problem for quite a while and no one on the internet seems to know how to fix it. Here are the exact steps:
1. Connect to Macbook Pro itunes from ipad 2 or iphone 4 using Remote App.
2. Connection is established and can control local library, volume, start, stop... etc..
3. Try to click on the "Radio" tab in the side bar... right panel displays "Loading..." messaging.
4. iTunes on Macbook Pro appears to refresh the listing of radio stations and they are displayed within itunes
5. iPad or iPhone remote app continues to display the "Loading..." graphic and never actually loads the radio station listing
Result:
Radio cannot be controlled remotely by the remote app.
Additional notes:
If you start a radio station from the iTunes app from the computer itself, you can then stop and start it from remote, but you can never control the listing/look for other radio stations, etc.
Is anyone else having this problem? Seems like a huge bug and I'm curious if anyone has found a solution.
Thanks,
Alex

Also having a similar problem. Maybe what I've tried will help, possibly not though as I'm still searching for a solution too.
Have Remote App on iPhone 4S to control Apple TV (ver3) which it does fine regarding playlists on iTunes (on Win PC), but doesn't regarding iTunes Radio. Curiously, Apple TV has an iTunes Radio app within it's menu, but it can only be controlled (apparently) with the Apple TV remote (not the iPhone Remote App), AND you'll need Apple TV connected to a TV monitor to see what's happening...you can't see it from the Remote App on the iPhone. I've digressed a bit, sorry. What I noticed on the Remote App is when you click on your iTunes library and then click on the "More" option (bottom right) it actually has a listing for Radio. If you click on Radio the genre list comes up then you can select a station. The problem is that the station never plays.
In another problem post someone suggested creating an iTunes Radio playlist within your iTunes library and then dragging individual radio stations to it, just like you would any other music. When I tried that, the Remote App can "see" this playlist through your library, but similar to the above, the station never plays once you select it. Note: The other post suggests that this allows the Remote App to play your radio stations, but I never got it to work.
So, like all above, I'm stuck as well. Very strange that the Remote App can "see" the Radio stations via my two methods above, but is not able to make them "play".

Remote App from Ipad return "Failed to parse authorization Challange"

Hi,
I have set up a Remote App infrastructure on Windows 2012 server , I have publish some apps , I have publish my server on internet opening port 443 and 3389 for RDP with a public rapid SSL wildcard certificate ... everything works on pcs but when I try
to connect with my ipad from external I receive the error:
"Failed to parse authorization Challange"
with the following log:
===== DO NOT DELETE CONTENT BELOW THIS LINE =====
[2014-May-06 12:03:11] RDP (0): Resolved 'apps.mydomain.com' to '195.206.y.x' using NameResolveMethod_Unknown(0)
[2014-May-06 12:03:11] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/librdp/librdp/private/httpendpoint.cpp' at line 209
    User Message : The gateway failed to connect with the message: 404 Not Found
[2014-May-06 12:03:11] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/librdp/librdp/private/httpendpoint.cpp' at line 209
    User Message : The gateway failed to connect with the message: 404 Not Found
[2014-May-06 12:03:11] RDP (0): Error message: The gateway failed to connect with the message: 404 Not Found(phase: 0, type: 0, reason: 0, systemCode: -1, systemMessage: )
[2014-May-06 12:03:11] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-May-06 12:03:11] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-May-06 12:03:11] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-May-06 12:03:13] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-May-06 12:03:13] RDP (0): client version: 8.0.5.24403 on iPad3,6 (iPhone OS 7.1.1)
[2014-May-06 12:03:13] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-May-06 12:03:13] RDP (0): Final rdp configuration used: {
    activeUsername = "COPAN\\ataglietti";
    arcTimeout = 1800;
    cacheId = 77310DD3EA18B941;
    certificatesUseRedirectName = 1;
    configurationVersion = 8;
    font = 1;
    gatewayId = 01C00DD3EA18B941;
    gatewayMode = 2;
    host = "SRVAPP.MYDOMAIN";
    label = AS400;
    loadBalanceInfo = "tsv://MS Terminal Services Plugin.1.QuickSessionCollection";
    mouseMode = "-1";
    port = 3389;
    remoteProgram = "||AS400";
    remoteProgramArguments = "";
    remoteProgramRail = 1;
    temporary = 1;
    type = rdp;
    useAlt = 0;
    utilityBar = "-1";
    webFeedVersion = "Windows 2008 R2 or newer";
    connections =     (
        77310DD3EA18B941,
        84F1ABD3EA18B941,
        51A54AD4EA18B941,
        DF88EED4EA18B941,
        9E7D8DD5EA18B941,
        E1EB2BD6EA18B941,
        CA18C3D6EA18B941
    host = "apps.mydomain.com";
    id = 01C00DD3EA18B941;
    port = 443;
    temporary = 1;
    type = rdp;
    kCFProxyTypeKey = kCFProxyTypeNone;
[2014-May-06 12:03:13] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-May-06 12:03:13] RDP (0): lo0 af=18 addr= netmask=
[2014-May-06 12:03:13] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-May-06 12:03:13] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-May-06 12:03:13] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-May-06 12:03:13] RDP (0): pdp_ip0 af=18 addr= netmask=
[2014-May-06 12:03:13] RDP (0): pdp_ip0 af=2 (AF_INET) addr=109.112.3.43 netmask=255.255.255.255
[2014-May-06 12:03:13] RDP (0): pdp_ip1 af=18 addr= netmask=
[2014-May-06 12:03:13] RDP (0): pdp_ip2 af=18 addr= netmask=
[2014-May-06 12:03:13] RDP (0): pdp_ip3 af=18 addr= netmask=
[2014-May-06 12:03:13] RDP (0): ap1 af=18 addr= netmask=
[2014-May-06 12:03:13] RDP (0): en0 af=18 addr= netmask=
[2014-May-06 12:03:13] RDP (0): en2 af=18 addr= netmask=
[2014-May-06 12:03:13] RDP (0): awdl0 af=18 addr= netmask=
[2014-May-06 12:03:13] RDP (0): --- END INTERFACE LIST ---
[2014-May-06 12:03:13] RDP (0): Not using any proxy
[2014-May-06 12:03:13] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-May-06 12:03:13] RDP (0): Resolved 'SRVAPP.mydomain' to 'ERROR: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.' using NameResolveMethod_Unknown(0)
[2014-May-06 12:03:13] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.(phase: 0, type: 0, reason: 0, systemCode: 0, systemMessage: )
[2014-May-06 12:03:13] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-May-06 12:03:14] RDP (0): Final rdp configuration used: {
    activeUsername = "COPAN\\ataglietti";
    arcTimeout = 1800;
    cacheId = 77310DD3EA18B941;
    certificatesUseRedirectName = 1;
    configurationVersion = 8;
    font = 1;
    gatewayId = 01C00DD3EA18B941;
    gatewayMode = 2;
    gwAutodetectState = kConnectionGwAutodectedForceGW;
    host = "SRVAPP.mydomain";
    label = AS400;
    loadBalanceInfo = "tsv://MS Terminal Services Plugin.1.QuickSessionCollection";
    mouseMode = "-1";
    port = 3389;
    remoteProgram = "||AS400";
    remoteProgramArguments = "";
    remoteProgramRail = 1;
    temporary = 1;
    type = rdp;
    useAlt = 0;
    utilityBar = "-1";
    webFeedVersion = "Windows 2008 R2 or newer";
    connections =     (
        77310DD3EA18B941,
        84F1ABD3EA18B941,
        51A54AD4EA18B941,
        DF88EED4EA18B941,
        9E7D8DD5EA18B941,
        E1EB2BD6EA18B941,
        CA18C3D6EA18B941
    host = "apps.mydomain.com";
    id = 01C00DD3EA18B941;
    port = 443;
    temporary = 1;
    type = rdp;
    kCFProxyTypeKey = kCFProxyTypeNone;
[2014-May-06 12:03:14] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-May-06 12:03:14] RDP (0): lo0 af=18 addr= netmask=
[2014-May-06 12:03:14] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-May-06 12:03:14] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-May-06 12:03:14] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-May-06 12:03:14] RDP (0): pdp_ip0 af=18 addr= netmask=
[2014-May-06 12:03:14] RDP (0): pdp_ip0 af=2 (AF_INET) addr=109.112.3.43 netmask=255.255.255.255
[2014-May-06 12:03:14] RDP (0): pdp_ip1 af=18 addr= netmask=
[2014-May-06 12:03:14] RDP (0): pdp_ip2 af=18 addr= netmask=
[2014-May-06 12:03:14] RDP (0): pdp_ip3 af=18 addr= netmask=
[2014-May-06 12:03:14] RDP (0): ap1 af=18 addr= netmask=
[2014-May-06 12:03:14] RDP (0): en0 af=18 addr= netmask=
[2014-May-06 12:03:14] RDP (0): en2 af=18 addr= netmask=
[2014-May-06 12:03:14] RDP (0): awdl0 af=18 addr= netmask=
[2014-May-06 12:03:14] RDP (0): --- END INTERFACE LIST ---
[2014-May-06 12:03:14] RDP (0): Not using any proxy
[2014-May-06 12:03:14] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-May-06 12:03:14] RDP (0): Resolved 'apps.mydomain.com' to '195.z.y.x' using NameResolveMethod_Unknown(0)
[2014-May-06 12:03:14] RDP (0): Resolved 'apps.mydomain.com' to '195.z.y.x' using NameResolveMethod_Unknown(0)
[2014-May-06 12:03:14] RDP (0): HTTP RPC_IN_DATA connection redirected from https://apps.mydomain.com:443/rpc/rpcproxy.dll?localhost:3388 to https://apps.mydomain.com/RDWeb/rpc/rpcproxy.dll
[2014-May-06 12:03:14] RDP (0): Resolved 'apps.mydomain.com' to '195.z.y.x' using NameResolveMethod_Unknown(0)
[2014-May-06 12:03:14] RDP (0): HTTP RPC_OUT_DATA connection redirected from https://apps.mydomain.com:443/rpc/rpcproxy.dll?localhost:3388 to https://apps.mydomain.com/RDWeb/rpc/rpcproxy.dll
[2014-May-06 12:03:14] RDP (0): Resolved 'apps.mydomain.com' to '195.z.y.x' using NameResolveMethod_Unknown(0)
[2014-May-06 12:03:16] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/librdp/librdp/private/httpendpoint.cpp' at line 209
    User Message : The gateway failed to connect with the message: 404 Not Found
[2014-May-06 12:03:16] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/librdp/librdp/private/httpendpoint.cpp' at line 209
    User Message : The gateway failed to connect with the message: 404 Not Found
[2014-May-06 12:03:16] RDP (0): Error message: The gateway failed to connect with the message: 404 Not Found(phase: 0, type: 0, reason: 0, systemCode: -1, systemMessage: )
[2014-May-06 12:03:16] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-May-06 12:03:16] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-May-06 12:03:16] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-May-06 12:05:15] RDP (0): Application went into background
[2014-May-06 12:26:21] RDP (0): Application became foreground application
[2014-May-06 12:26:31] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-May-06 12:26:31] RDP (0): client version: 8.0.5.24403 on iPad3,6 (iPhone OS 7.1.1)
[2014-May-06 12:26:31] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-May-06 12:26:31] RDP (0): Final rdp configuration used: {
    activeUsername = "COPAN\\ataglietti";
    arcTimeout = 1800;
    cacheId = 9EB75556F018B941;
    certificatesUseRedirectName = 1;
    configurationVersion = 8;
    font = 1;
    gatewayId = 01C00DD3EA18B941;
    gatewayMode = 2;
    host = "SRVAPP.MYDOMAIN";
    label = "CAPA_64bit";
    loadBalanceInfo = "tsv://MS Terminal Services Plugin.1.QuickSessionCollection";
    mouseMode = "-1";
    port = 3389;
    remoteProgram = "||CAPA_64bit";
    remoteProgramArguments = "";
    remoteProgramRail = 1;
    temporary = 1;
    type = rdp;
    useAlt = 0;
    utilityBar = "-1";
    webFeedVersion = "Windows 2008 R2 or newer";
    connections =     (
        77310DD3EA18B941,
        84F1ABD3EA18B941,
        51A54AD4EA18B941,
        DF88EED4EA18B941,
        9E7D8DD5EA18B941,
        E1EB2BD6EA18B941,
        CA18C3D6EA18B941,
        5F0AB755F018B941,
        9EB75556F018B941,
        57CCEC56F018B941
    host = "apps.mydomain.com";
    id = 01C00DD3EA18B941;
    port = 443;
    temporary = 1;
    type = rdp;
    kCFProxyTypeKey = kCFProxyTypeNone;
[2014-May-06 12:26:31] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-May-06 12:26:31] RDP (0): lo0 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-May-06 12:26:31] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-May-06 12:26:31] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-May-06 12:26:31] RDP (0): pdp_ip0 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): pdp_ip0 af=2 (AF_INET) addr=109.112.3.43 netmask=255.255.255.255
[2014-May-06 12:26:31] RDP (0): pdp_ip1 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): pdp_ip2 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): pdp_ip3 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): ap1 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): en0 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): en2 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): awdl0 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): --- END INTERFACE LIST ---
[2014-May-06 12:26:31] RDP (0): Not using any proxy
[2014-May-06 12:26:31] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-May-06 12:26:31] RDP (0): Resolved 'SRVAPP.MYDOMAIN' to 'ERROR: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.' using NameResolveMethod_Unknown(0)
[2014-May-06 12:26:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.(phase: 0, type: 0, reason: 0, systemCode: 0, systemMessage: )
[2014-May-06 12:26:31] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-May-06 12:26:31] RDP (0): Final rdp configuration used: {
    activeUsername = "COPAN\\ataglietti";
    arcTimeout = 1800;
    cacheId = 9EB75556F018B941;
    certificatesUseRedirectName = 1;
    configurationVersion = 8;
    font = 1;
    gatewayId = 01C00DD3EA18B941;
    gatewayMode = 2;
    gwAutodetectState = kConnectionGwAutodectedForceGW;
    host = "SRVAPP.MYDOMAIN";
    label = "CAPA_64bit";
    loadBalanceInfo = "tsv://MS Terminal Services Plugin.1.QuickSessionCollection";
    mouseMode = "-1";
    port = 3389;
    remoteProgram = "||CAPA_64bit";
    remoteProgramArguments = "";
    remoteProgramRail = 1;
    temporary = 1;
    type = rdp;
    useAlt = 0;
    utilityBar = "-1";
    webFeedVersion = "Windows 2008 R2 or newer";
    connections =     (
        77310DD3EA18B941,
        84F1ABD3EA18B941,
        51A54AD4EA18B941,
        DF88EED4EA18B941,
        9E7D8DD5EA18B941,
        E1EB2BD6EA18B941,
        CA18C3D6EA18B941,
        5F0AB755F018B941,
        9EB75556F018B941,
        57CCEC56F018B941,
        BFD38857F018B941
    host = "apps.mydomain.com";
    id = 01C00DD3EA18B941;
    port = 443;
    temporary = 1;
    type = rdp;
    kCFProxyTypeKey = kCFProxyTypeNone;
[2014-May-06 12:26:31] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-May-06 12:26:31] RDP (0): lo0 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-May-06 12:26:31] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-May-06 12:26:31] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-May-06 12:26:31] RDP (0): pdp_ip0 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): pdp_ip0 af=2 (AF_INET) addr=109.112.3.43 netmask=255.255.255.255
[2014-May-06 12:26:31] RDP (0): pdp_ip1 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): pdp_ip2 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): pdp_ip3 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): ap1 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): en0 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): en2 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): awdl0 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): --- END INTERFACE LIST ---
[2014-May-06 12:26:31] RDP (0): Not using any proxy
[2014-May-06 12:26:31] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-May-06 12:26:31] RDP (0): Resolved 'apps.mydomain.com' to '195.z.y.x' using NameResolveMethod_Unknown(0)
[2014-May-06 12:26:31] RDP (0): Resolved 'apps.mydomain.com' to '195.z.y.x' using NameResolveMethod_Unknown(0)
[2014-May-06 12:26:33] RDP (0): HTTP RPC_OUT_DATA connection redirected from https://apps.mydomain.com:443/rpc/rpcproxy.dll?localhost:3388 to https://apps.mydomain.com/RDWeb/rpc/rpcproxy.dll
[2014-May-06 12:26:33] RDP (0): HTTP RPC_IN_DATA connection redirected from https://apps.mydomain.com:443/rpc/rpcproxy.dll?localhost:3388 to https://apps.mydomain.com/RDWeb/rpc/rpcproxy.dll
[2014-May-06 12:26:33] RDP (0): Resolved 'apps.mydomain.com' to '195.z.y.x' using NameResolveMethod_Unknown(0)
[2014-May-06 12:26:33] RDP (0): Resolved 'apps.mydomain.com' to '195.z.y.x' using NameResolveMethod_Unknown(0)
[2014-May-06 12:26:33] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/librdp/librdp/private/httpendpoint.cpp' at line 209
    User Message : The gateway failed to connect with the message: 404 Not Found
[2014-May-06 12:26:33] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/librdp/librdp/private/httpendpoint.cpp' at line 209
    User Message : The gateway failed to connect with the message: 404 Not Found
[2014-May-06 12:26:33] RDP (0): Error message: The gateway failed to connect with the message: 404 Not Found(phase: 0, type: 0, reason: 0, systemCode: -1, systemMessage: )
[2014-May-06 12:26:33] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-May-06 12:26:33] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-May-06 12:26:33] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-May-06 12:28:37] RDP (0): Application went into background
[2014-May-06 12:34:23] RDP (0): Application became foreground application
[2014-May-06 12:34:32] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-May-06 12:34:32] RDP (0): client version: 8.0.5.24403 on iPad3,6 (iPhone OS 7.1.1)
[2014-May-06 12:34:32] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-May-06 12:34:32] RDP (0): Final rdp configuration used: {
    activeUsername = "COPAN\\ataglietti";
    arcTimeout = 1800;
    cacheId = 31CE4F37F218B941;
    certificatesUseRedirectName = 1;
    configurationVersion = 8;
    font = 1;
    gatewayId = 01C00DD3EA18B941;
    gatewayMode = 2;
    host = "SRVAPP.MYDOMAIN";
    label = "DifettiProduzione_64bit";
    loadBalanceInfo = "tsv://MS Terminal Services Plugin.1.QuickSessionCollection";
    mouseMode = "-1";
    port = 3389;
    remoteProgram = "||DifettiProduzione_64bit";
    remoteProgramArguments = "";
    remoteProgramRail = 1;
    temporary = 1;
    type = rdp;
    useAlt = 0;
    utilityBar = "-1";
    webFeedVersion = "Windows 2008 R2 or newer";
    connections =     (
        77310DD3EA18B941,
        84F1ABD3EA18B941,
        51A54AD4EA18B941,
        DF88EED4EA18B941,
        9E7D8DD5EA18B941,
        E1EB2BD6EA18B941,
        CA18C3D6EA18B941,
        5F0AB755F018B941,
        9EB75556F018B941,
        57CCEC56F018B941,
        BFD38857F018B941,
        F6424158F018B941,
        66C1EC58F018B941,
        83858B59F018B941,
        6EA42436F218B941,
        1CEEAB36F218B941,
        31CE4F37F218B941,
        F7B0DF37F218B941,
        3D436438F218B941
    host = "apps.mydomain.com";
    id = 01C00DD3EA18B941;
    port = 443;
    temporary = 1;
    type = rdp;
    kCFProxyTypeKey = kCFProxyTypeNone;
[2014-May-06 12:34:32] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-May-06 12:34:32] RDP (0): lo0 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-May-06 12:34:32] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-May-06 12:34:32] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-May-06 12:34:32] RDP (0): pdp_ip0 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): pdp_ip0 af=2 (AF_INET) addr=109.112.3.43 netmask=255.255.255.255
[2014-May-06 12:34:32] RDP (0): pdp_ip1 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): pdp_ip2 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): pdp_ip3 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): ap1 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): en0 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): en2 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): awdl0 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): --- END INTERFACE LIST ---
[2014-May-06 12:34:32] RDP (0): Not using any proxy
[2014-May-06 12:34:32] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-May-06 12:34:32] RDP (0): Resolved 'SRVAPP.MYDOMAIN' to 'ERROR: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.' using NameResolveMethod_Unknown(0)
[2014-May-06 12:34:32] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.(phase: 0, type: 0, reason: 0, systemCode: 0, systemMessage: )
[2014-May-06 12:34:32] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-May-06 12:34:32] RDP (0): Final rdp configuration used: {
    activeUsername = "COPAN\\ataglietti";
    arcTimeout = 1800;
    cacheId = 31CE4F37F218B941;
    certificatesUseRedirectName = 1;
    configurationVersion = 8;
    font = 1;
    gatewayId = 01C00DD3EA18B941;
    gatewayMode = 2;
    gwAutodetectState = kConnectionGwAutodectedForceGW;
    host = "SRVAPP.MYDOMAIN";
    label = "DifettiProduzione_64bit";
    loadBalanceInfo = "tsv://MS Terminal Services Plugin.1.QuickSessionCollection";
    mouseMode = "-1";
    port = 3389;
    remoteProgram = "||DifettiProduzione_64bit";
    remoteProgramArguments = "";
    remoteProgramRail = 1;
    temporary = 1;
    type = rdp;
    useAlt = 0;
    utilityBar = "-1";
    webFeedVersion = "Windows 2008 R2 or newer";
    connections =     (
        77310DD3EA18B941,
        84F1ABD3EA18B941,
        51A54AD4EA18B941,
        DF88EED4EA18B941,
        9E7D8DD5EA18B941,
        E1EB2BD6EA18B941,
        CA18C3D6EA18B941,
        5F0AB755F018B941,
        9EB75556F018B941,
        57CCEC56F018B941,
        BFD38857F018B941,
        F6424158F018B941,
        66C1EC58F018B941,
        83858B59F018B941,
        6EA42436F218B941,
        1CEEAB36F218B941,
        31CE4F37F218B941,
        F7B0DF37F218B941,
        3D436438F218B941,
        45F0EB38F218B941
    host = "apps.mydomain.com";
    id = 01C00DD3EA18B941;
    port = 443;
    temporary = 1;
    type = rdp;
    kCFProxyTypeKey = kCFProxyTypeNone;
[2014-May-06 12:34:32] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-May-06 12:34:32] RDP (0): lo0 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-May-06 12:34:32] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-May-06 12:34:32] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-May-06 12:34:32] RDP (0): pdp_ip0 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): pdp_ip0 af=2 (AF_INET) addr=109.112.3.43 netmask=255.255.255.255
[2014-May-06 12:34:32] RDP (0): pdp_ip1 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): pdp_ip2 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): pdp_ip3 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): ap1 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): en0 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): en2 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): awdl0 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): --- END INTERFACE LIST ---
[2014-May-06 12:34:32] RDP (0): Not using any proxy
[2014-May-06 12:34:32] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-May-06 12:34:32] RDP (0): Resolved 'apps.mydomain.com' to '195.z.y.x' using NameResolveMethod_Unknown(0)
[2014-May-06 12:34:32] RDP (0): Resolved 'apps.mydomain.com' to '195.z.y.x' using NameResolveMethod_Unknown(0)
[2014-May-06 12:34:35] RDP (0): HTTP RPC_IN_DATA connection redirected from https://apps.mydomain.com:443/rpc/rpcproxy.dll?localhost:3388 to https://apps.mydomain.com/RDWeb/rpc/rpcproxy.dll
[2014-May-06 12:34:35] RDP (0): Resolved 'apps.mydomain.com' to '195.z.y.x' using NameResolveMethod_Unknown(0)
[2014-May-06 12:34:35] RDP (0): HTTP RPC_OUT_DATA connection redirected from https://apps.mydomain.com:443/rpc/rpcproxy.dll?localhost:3388 to https://apps.mydomain.com/RDWeb/rpc/rpcproxy.dll
[2014-May-06 12:34:35] RDP (0): Resolved 'apps.mydomain.com' to '195.z.y.x' using NameResolveMethod_Unknown(0)
[2014-May-06 12:34:35] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/librdp/librdp/private/httpendpoint.cpp' at line 209
    User Message : The gateway failed to connect with the message: 404 Not Found
[2014-May-06 12:34:35] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/librdp/librdp/private/httpendpoint.cpp' at line 209
    User Message : The gateway failed to connect with the message: 404 Not Found
[2014-May-06 12:34:35] RDP (0): Error message: The gateway failed to connect with the message: 404 Not Found(phase: 0, type: 0, reason: 0, systemCode: -1, systemMessage: )
[2014-May-06 12:34:35] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-May-06 12:34:35] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-May-06 12:34:35] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-May-06 12:35:28] RDP (0): Application went into background
[2014-May-06 12:35:34] RDP (0): Application became foreground application
[2014-May-06 12:35:45] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-May-06 12:35:45] RDP (0): client version: 8.0.5.24403 on iPad3,6 (iPhone OS 7.1.1)
[2014-May-06 12:35:45] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-May-06 12:35:45] RDP (0): Final rdp configuration used: {
    activeUsername = "COPAN\\ataglietti";
    arcTimeout = 1800;
    cacheId = 2C11E07DF218B941;
    certificatesUseRedirectName = 1;
    configurationVersion = 8;
    font = 1;
    gatewayId = 8CDC4B79F218B941;
    gatewayMode = 2;
    host = "SRVAPP.MYDOMAIN";
    label = "DifettiProduzione_64bit";
    loadBalanceInfo = "tsv://MS Terminal Services Plugin.1.QuickSessionCollection";
    mouseMode = "-1";
    port = 3389;
    remoteProgram = "||DifettiProduzione_64bit";
    remoteProgramArguments = "";
    remoteProgramRail = 1;
    temporary = 1;
    type = rdp;
    useAlt = 0;
    utilityBar = "-1";
    webFeedVersion = "Windows 2008 R2 or newer";
    connections =     (
        30664B79F218B941,
        37A6A77CF218B941,
        EA3C467DF218B941,
        2C11E07DF218B941,
        EBE2767EF218B941,
        26E3887FF218B941,
        06F10D80F218B941,
        3EAE9580F218B941
    host = "apps.mydomain.com";
    id = 8CDC4B79F218B941;
    port = 443;
    temporary = 1;
    type = rdp;
    kCFProxyTypeKey = kCFProxyTypeNone;
[2014-May-06 12:35:45] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-May-06 12:35:45] RDP (0): lo0 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-May-06 12:35:45] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-May-06 12:35:45] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-May-06 12:35:45] RDP (0): pdp_ip0 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): pdp_ip0 af=2 (AF_INET) addr=109.112.3.43 netmask=255.255.255.255
[2014-May-06 12:35:45] RDP (0): pdp_ip1 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): pdp_ip2 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): pdp_ip3 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): ap1 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): en0 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): en2 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): awdl0 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): --- END INTERFACE LIST ---
[2014-May-06 12:35:45] RDP (0): Not using any proxy
[2014-May-06 12:35:45] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-May-06 12:35:45] RDP (0): Resolved 'SRVAPP.MYDOMAIN' to 'ERROR: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.' using NameResolveMethod_Unknown(0)
[2014-May-06 12:35:45] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.(phase: 0, type: 0, reason: 0, systemCode: 0, systemMessage: )
[2014-May-06 12:35:45] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-May-06 12:35:45] RDP (0): Final rdp configuration used: {
    activeUsername = "COPAN\\ataglietti";
    arcTimeout = 1800;
    cacheId = 2C11E07DF218B941;
    certificatesUseRedirectName = 1;
    configurationVersion = 8;
    font = 1;
    gatewayId = 8CDC4B79F218B941;
    gatewayMode = 2;
    gwAutodetectState = kConnectionGwAutodectedForceGW;
    host = "SRVAPP.MYDOMAIN";
    label = "DifettiProduzione_64bit";
    loadBalanceInfo = "tsv://MS Terminal Services Plugin.1.QuickSessionCollection";
    mouseMode = "-1";
    port = 3389;
    remoteProgram = "||DifettiProduzione_64bit";
    remoteProgramArguments = "";
    remoteProgramRail = 1;
    temporary = 1;
    type = rdp;
    useAlt = 0;
    utilityBar = "-1";
    webFeedVersion = "Windows 2008 R2 or newer";
    connections =     (
        30664B79F218B941,
        37A6A77CF218B941,
        EA3C467DF218B941,
        2C11E07DF218B941,
        EBE2767EF218B941,
        26E3887FF218B941,
        06F10D80F218B941,
        3EAE9580F218B941
    host = "apps.mydomain.com";
    id = 8CDC4B79F218B941;
    port = 443;
    temporary = 1;
    type = rdp;
    kCFProxyTypeKey = kCFProxyTypeNone;
[2014-May-06 12:35:45] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-May-06 12:35:45] RDP (0): lo0 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-May-06 12:35:45] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-May-06 12:35:45] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-May-06 12:35:45] RDP (0): pdp_ip0 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): pdp_ip0 af=2 (AF_INET) addr=109.112.3.43 netmask=255.255.255.255
[2014-May-06 12:35:45] RDP (0): pdp_ip1 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): pdp_ip2 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): pdp_ip3 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): ap1 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): en0 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): en2 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): awdl0 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): --- END INTERFACE LIST ---
[2014-May-06 12:35:45] RDP (0): Not using any proxy
[2014-May-06 12:35:45] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-May-06 12:35:45] RDP (0): Resolved 'apps.mydomain.com' to '195.z.y.x' using NameResolveMethod_Unknown(0)
[2014-May-06 12:35:45] RDP (0): Resolved 'apps.mydomain.com' to '195.z.y.x' using NameResolveMethod_Unknown(0)
[2014-May-06 12:35:46] RDP (0): HTTP RPC_IN_DATA connection redirected from https://apps.mydomain.com:443/rpc/rpcproxy.dll?localhost:3388 to https://apps.mydomain.com/RDWeb/rpc/rpcproxy.dll
[2014-May-06 12:35:46] RDP (0): Resolved 'apps.mydomain.com' to '195.z.y.x' using NameResolveMethod_Unknown(0)
[2014-May-06 12:35:46] RDP (0): HTTP RPC_OUT_DATA connection redirected from https://apps.mydomain.com:443/rpc/rpcproxy.dll?localhost:3388 to https://apps.mydomain.com/RDWeb/rpc/rpcproxy.dll
[2014-May-06 12:35:46] RDP (0): Resolved 'apps.mydomain.com' to '195.z.y.x' using NameResolveMethod_Unknown(0)
[2014-May-06 12:35:46] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/librdp/librdp/private/httpendpoint.cpp' at line 209
    User Message : The gateway failed to connect with the message: 404 Not Found
[2014-May-06 12:35:46] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/librdp/librdp/private/httpendpoint.cpp' at line 209
    User Message : The gateway failed to connect with the message: 404 Not Found
[2014-May-06 12:35:46] RDP (0): Error message: The gateway failed to connect with the message: 404 Not Found(phase: 0, type: 0, reason: 0, systemCode: -1, systemMessage: )
[2014-May-06 12:35:46] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-May-06 12:35:46] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-May-06 12:35:46] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-May-06 12:37:52] RDP (0): Application went into background
[2014-May-06 12:38:25] RDP (0): Application became foreground application
[2014-May-06 12:38:33] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-May-06 12:38:33] RDP (0): client version: 8.0.5.24403 on iPad3,6 (iPhone OS 7.1.1)
[2014-May-06 12:38:33] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-May-06 12:38:34] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-May-06 12:38:34] RDP (0): Final rdp configuration used: {
    activeUsername = "COPAN\\ataglietti";
    arcTimeout = 1800;
    cacheId = 75AFEF2AF318B941;
    certificatesUseRedirectName = 1;
    configurationVersion = 8;
    font = 1;
    gatewayId = 8CDC4B79F218B941;
    gatewayMode = 2;
    host = "SRVAPP.MYDOMAIN";
    label = "DifettiProduzione_64bit";
    loadBalanceInfo = "tsv://MS Terminal Services Plugin.1.QuickSessionCollection";
    mouseMode = "-1";
    port = 3389;
    remoteProgram = "||DifettiProduzione_64bit";
    remoteProgramArguments = "";
    remoteProgramRail = 1;
    temporary = 1;
    type = rdp;
    useAlt = 0;
    utilityBar = "-1";
    webFeedVersion = "Windows 2008 R2 or newer";
    connections =     (
        30664B79F218B941,
        37A6A77CF218B941,
        EA3C467DF218B941,
        2C11E07DF218B941,
        EBE2767EF218B941,
        26E3887FF218B941,
        06F10D80F218B941,
        3EAE9580F218B941,
        7F340829F318B941,
        1BBDAE29F318B941,
        26A8452AF318B941,
        75AFEF2AF318B941
    host = "apps.mydomain.com";
    id = 8CDC4B79F218B941;
    port = 443;
    temporary = 1;
    type = rdp;
    kCFProxyTypeKey = kCFProxyTypeNone;
[2014-May-06 12:38:34] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-May-06 12:38:34] RDP (0): lo0 af=18 addr= netmask=
[2014-May-06 12:38:34] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-May-06 12:38:34] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-May-06 12:38:34] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-May-06 12:38:34] RDP (0): pdp_ip0 af=18 addr= netmask=
[2014-May-06 12:38:34] RDP (0): pdp_ip0 af=2 (AF_INET) addr=109.112.3.43 netmask=255.255.255.255
[2014-May-06 12:38:34] RDP (0): pdp_ip1 af=18 addr= netmask=
[2014-May-06 12:38:34] RDP (0): pdp_ip2 af=18 addr= netmask=
[2014-May-06 12:38:34] RDP (0): pdp_ip3 af=18 addr= netmask=
[2014-May-06 12:38:34] RDP (0): ap1 af=18 addr= netmask=
[2014-May-06 12:38:34] RDP (0): en0 af=18 addr= netmask=
[2014-May-06 12:38:34] RDP (0): en2 af=18 addr= netmask=
[2014-May-06 12:38:34] RDP (0): awdl0 af=18 addr= netmask=
[2014-May-06 12:38:34] RDP (0): --- END INTERFACE LIST ---
[2014-May-06 12:38:34] RDP (0): Not using any proxy
[2014-May-06 12:38:34] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-May-06 12:38:35] RDP (0): Resolved 'SRVAPP.MYDOMAIN' to 'ERROR: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.' using NameResolveMethod_Unknown(0)
[2014-May-06 12:38:35] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.(phase: 0, type: 0, reason: 0, systemCode: 0, systemMessage: )
[2014-May-06 12:38:35] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-May-06 12:38:35] RDP (0): Final rdp configuration used: {
    activeUsername = "COPAN\\ataglietti";
    arcTimeout = 1800;
    cacheId = 75AFEF2AF318B941;
    certificatesUseRedirectName = 1;
    configurationVersion = 8;
    font = 1;
    gatewayId = 8CDC4B79F218B941;
    gatewayMode = 2;
    gwAutodetectState = kConnectionGwAutodectedForceGW;
    host = "SRVAPP.MYDOMAIN";
    label = "DifettiProduzione_64bit";
    loadBalanceInfo = "tsv://MS Terminal Services Plugin.1.QuickSessionCollection";
    mouseMode = "-1";
    port = 3389;
    remoteProgram = "||DifettiProduzione_64bit";
    remoteProgramArguments = "";
    remoteProgramRail = 1;
    temporary = 1;
    type = rdp;
    useAlt = 0;
    utilityBar = "-1";
    webFeedVersion = "Windows 2008 R2 or newer";
   THANKS FOR SUGGESTION

Hi,
Thank you for posting in Windows Server Forum.
Please check that you have enable RD Web SSO and as you have buy RapidSSL wildcard certificate you need to see that certificate installed with its private key and also need to store the certificate under local computer personal store.
In addition check the group policy whether you added server name in “Allow Delegating Default Credentials” under below path.
Computer Configuration\Administrative Templates\System\Credentials Delegation
Please check below articles for details.
Remote Desktop Web Access single sign-on now easier to enable in Windows Server 2012
http://blogs.msdn.com/b/rds/archive/2012/06/25/remote-desktop-web-access-single-sign-on-now-easier-to-enable-in-windows-server-2012.aspx
Hope it helps!
Thanks.
Dharmesh Solanki

IPad and iPhone Remote app no longer see my AppleTV (1st Generation)

For months, I've been using the Remote app from my iPad to control my first generation AppleTV. When I got an iPhone 4 and got the Remote app for it, I tried to do the same thing, but now AppleTV will not recognize my iPhone 4, and no longer recognizes my iPad. All it will allow me to use is the ****** little remote that came with it.
How do I fix this?
Notes:
AppleTV is synchronized with my iTunes library
Home Sharing on the PC is turned on
Remote App tells me to "turn on home sharing on the AppleTV from the Computers section of the Settings menu" but no such option exists.

AppleTV1 doen't use Home Sharing. Try this:
Apple TV (1st generation)
Connect iPhone, iPad or iPod touch to a Wi-Fi network that is connected to the local network that your Apple TV also connected to.
Open the Remote app on your mobile device.
Select Add an iTunes Library in the Remote settings screen. Remote will then display a 4 digit passcode.
On Apple TV, select Settings from the main menu, select General and then Remotes.
Select the name of your iPhone or iPod touch.
Enter the 4 digit passcode. Use the volume up/down keys on the Apple Remote (Infrared) to change the number that is displayed and the track next/back keys to switch digits.
Click Done.
Remote app will be paired with Apple TV and you can begin browsing your library using Remote and select a piece of content to play.
http://support.apple.com/kb/HT1947

Can I access two different libraries on the same computer with the remote app?

I am in the process of upgrading our home network. There is going to be an airport express in each of the main rooms of our house all running to a switch connected to our AirPort Extreme. The reason for this is so we can stream our music in any or all of the rooms we choose. I'm going to have a Windows 7 PC running iTunes constantly also connected so that we will have access to the entire library on any of our devices. My entire library will be housed on an external hard drive that will be connected to the Extreme. Here is where it gets tricky. My wife has a separate library that we want to have access to as well. It is going to be housed on a separate external hard drive connected to the Extreme via a USB hub. I don't want to combine our libraries because hers is absolute chaos and mine is very well organized. Without having to have a second computer running iTunes constantly, is there a way we can access both libraries simultaneously with the remote app? Either by running two instances of iTunes on one computer or some other way I'm not realizing. As it works right now, if we're both running iTunes on our laptops, then I can go onto my iPad and see both full libraries on the remote app. I want to do that, but with just one computer.

I doubt it is possible to run two instances of iTunes on the computer at the same time. To do so would require two users to be signed in and running iTunes under each user.
The better solution would be to either clean up and merge the two libraries or have iTunes running on a second computer.

Win Key Combination in Remote App

Similar Messages

Maybe you are looking for