Win+P doesn't work

Hi All,
How to make Win+P working? The others seem working, for example, win + Up.
Window key+P: Open Projector Settings Window
Thanks,
Andrew Huang
[email protected]

If you open Control Panel > Display and click on "Connect to a projector" in the left column, does the options window come up?
SC Tom
Thanks, Tom. No "Connect to a projector" in Display of Control Panel. But I use the following for setting "Multi-Screen":
Control Panel --> Display --> Adjusting resolution --> Change the appearance of your displays
Thanks,
Andrew Huang
[email protected]

Similar Messages

  • Satellite U920T - front/back cam + touch screen + win button doesn't work

    I have the issue that the touch screen + front camera + back camera + windows button on the screen are not working.
    I tried installing the display/graphics drivers but that did not helped.
    I bought this laptop from Saudi Arabia and it is still under warranty but I am out of country so i cant claim the warranty as well.
    someone please sort out this issue and tell me the solution or tell me what i should do?
    Help will be really appreciated.
    some details about my laptop:
    Toshiba Satellite U920T-B919.
    windows 8.1 update 64 bit.
    Thanks,

    Since you mentioned different issues with your notebook, I think that in this case its advisable to recover the notebook back to factory settings just to check if all these problems are related to system problem.
    Regarding the webcam: the Windows 8 /8.1 already contains the webcam drivers and therefore additional webcam driver installation isnt possible. Additional webcam driver does not exist simply.
    From my point of few the whole description smells a little bit like a hardware problem of the upper slide part where the touchscreen is part of.
    The win button as well as the both cams are located there and probably there is some lose connection between the two parts (touchscreen and keyboard)
    Anyway, as I said above, its advisable to recover the notebook to factory settings just to ensure that the system isnt the troublemaker.
    In case of hardware problems, you would need to get in contact with service available in your country.

  • Dual monitors with Win 7 - doesn't work

    I have multiple monitors (3) and have been using FF 3+. When I upgraded it won't display right (flickers, black screen until I mouse over, etc.).
    I tried to regress but I cannot go back to v.3+ It only shows FF4 as being available, even after deleting the product.
    Unfortunately, I had to stoop to using IE (shudder!).
    I'm running Win7 (64-bit), 4 Gig RAM, NVIDEA GeForce video cards, 2 - 19" and one 24" monitors.
    This setup worked fine with previous version of FF. Please help me get off IE!

    Windows7 Recovery:
     http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01867418&tmp_task=solveCategory&cc=us&dlc=en&lc...
    If you didn't do so and now can't> create Recovery Disks you can order from HP for a small fee. You will need serial number to order> Guide to Finding System Info
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • GTA: San Andreas doesn't work

    When I try to launch GTA: San Andreas under Wine, it doesn't work.
    rinaldus@Peter:~$ wine GTA\ San\ Andreas/gta_sa.exe
    fixme:system:SystemParametersInfoW Unimplemented action: 8193 (SPI_SETFOREGROUNDLOCKTIMEOUT)
    And nothing happens. I should to press Ctrl+C to break. However, GTA: San Andreas worked perfectly under Wine on Ubuntu. Here's my /etc/X11/xorg.conf: http://pastebin.ca/1191258
    Please, explain me why San Andreas doesn't work on Arch and work on Ubuntu?

    What does "it doesn't work " mean?
    Have you tried deleting and installing again?
    have you tried a reset?
    Have you contacted the app developer?

  • ITunes (11.1.5.) doesn't work properly in Win 7

    Am I the only one whose iTunes doesn't work properly in Win 7? I open iTunes and few seconds later it closes itself because Windows finds some problems. I've already reinstalled the whole program but this problem still stands.

    Hello pillajunior,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Have a nice day,
    Mario

  • Remote Control Doesn't Work in Win-7 !!!

    After upgrade operating system to win-7 Remote Control Stop Working !!
    and the ENE CIR Already installed ...
    but it's still Don't Work
    My Remote Details : RC1762302/00
    3139 228 50021
    Hp SPS :435743-001
    HP:HSTNN-PRO7
    RC6 IR
    cp04 30801 j 064454 REVB
    and this pic 4 it http://img44.imageshack.us/img44/971/846610569l.jpg

    I too have this exact same issue.  The play, stop, forward, reverse buttons don't do anything, and also the sound buttons, they activate the volume window but not adjustment of the volume happens. The only buttons that work are the opening of applications and the power button. All this happened after I installed some free updating software for some other paid and free applications I have (Advanced SystemCare Professional), all quite legitiment, as a result there were corrupt icons and I had to uninstall the offending software and some corrupted software including Microsoft Office beta and reinstall... no viruses were found on a full Zonealarm scan.  I have the DV6-2113TX on Win-7.  If ANYONE has a clue how to fix the full functionality of the remote, please let me know as it's really niggling me that it just doesn't work even after reinstalling the drivers for the IR etc.
    I tried contacting HP online and I get NO replies.  I am yet to phone.  It is still under warranty with 20 months left (8 months manufacturer, 12 months supplier).
    cheers
    Jasen

  • Latest wine doesn't work with ie4linux

    downgrading to wine-0.9.36-1.pkg.tar.gz solved the problem

    You could try to build wine-0.9.38 with makepkg from /var/abs/extra/x11/wine. The last package is faulty in the extra repository. It was built without font support and possibly other dependencies as well. But the PKGBUILD should have all dependencies.
    You can read the other wine posts in forum. If it doesn't work for you, you can alwas revert to 0.9.36. And you can always add a comment to the bug for wine in the bugs page to put some press on the developer to try to fix his build.
    Linfan

  • PEAP-GTC on Win 7 and 8 platforms (LDAP authentication doesn't work)

    Hi all!
    Customer is using Open LDAP as directory services.
    We're setting Cisco Wi-Fi network with following authentication scheme:
    Wireless LAN Controller - Cisco ACS 5.3 - Open LDAP
    According to the documents ACS - LDAP supports only EAP-TLS and PEAP-GTC methods.
    We need to perform username/password authentication. It works good on Apple and Android devices. But id doesn't want to authenticate Windows 7 clients.
    We're unchecking "Validate Servers certificate" in WLAN settings of Win 7 client, but it still doesn't work.
    It seems, that Windows doesn't support PEAP-GTC method. Are there any workaround to solve the issue?
    I might assume, that there could be some software plug-ins (supplicants) that can be installed on Windows and give support of PEAP-GTC. But in this case customer will face serious organizational issues of provisioning new devices.
    Please advice!
    Thank you!
    Yuriy

    In order to see PEAP EAP-GTC option on the client, you need to install EAP-GTC supplicant on the client machine.
    Check this:
    http://www.cisco.com/en/US/docs/wireless/technology/peap/technical/reference/PEAP_D.html#wp1007967
    Jatin Katyal
    - Do rate helpful posts -

  • GPO don't run specified windows applications doesn't work to in win 8.1. any ideas why?

    GPO "don't run specified windows applications" doesn't work to in win 8.1. any ideas why?  it is enabled and list of progs is entered however I can still run all progs on list.  This is a local machine not on a domain.  I must
    have this work to disable games, IE, MSpaint, etc.  Computer has been restarted since enabling the GPO and also have enforced the GPO via CMD prompt.  worked fine on windows 8 and 7.

    Any success ?
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • My live! platinum doesn't work on win

    My sound blaster li've! II platinum doesn't work on win xp! I have tried to download drivers and install them but it's still impossible to listen to my external midi keyboard. Creative Playcenter, recorder, launcher and surround mixer are impossible to initialize....a message tell me that there's an error or that it's impossible to find drivers. I've tried to re-install everything and then install new drivers for xp but...nothing!!!
    How can I solve these problems? I want again complete funcionality of my audio card!
    Thanks to everyone will give me an answer...
    Bob

    iOS: Troubleshooting applications purchased from the App Store
    You may want to try deleting the app and download it again. Read the troubleshooting steps.

  • Hello, I have purchased Adobe Design Premium CS5 with Acrobat Professional 9.0 with Win License in 2010.  Same computer, doesn't work any more?

    Hello, I have purchased Adobe Design Premium CS5 with Acrobat Professional 9.0 with Win License in 2010. Last month, the software is deactivated and asked me to reinstall it, however, the serial number I have doesn't work anymore. The computer is still the same, operation system is also the same. Something must be wrong with ADOBE. Can you help to resolve? Or direct me to a right person and number? Thanks!

    I tried, the Design CS5 worked that way, but not the acrobat pro. 9.0. I will update with what I was suggested to download again from Adobe volume licensing site. Since my computer is at my work. This is the site I was referred to:  Adobe Licensing Website | Serial numbers | Orders | Accounts

  • Video seek doesn't work in detached playback window. Win 7 x64

    Seeking video using the tracker doesn't work in a detached video playback window when running 64-bit Windows 7. It last worked in 9.0.1, it stopped working in 9.0.2, and it wasn't fixed in 9.0.3. I can replicate this on every Windows 7 64-bit machine. I constantly have to waste time looking for an old downgraded version of iTunes as a result of this. It's been 6 months now. How many more years do you geniuses need to fix this blatantly obvious regression defect in your product?

    Update:
    I've just discovered that this is apparently only a problem with Firefox. I can adjust volume in flash games and YouTube in Google Chrome just fine. Still not sure of any way to fix these issues with Firefox, but it still helps to know that.

  • Yoga 2 1051L Win 8.1 - 3G modem doesn't work on Vodafone

    I've bought a Yoga Tablet 2 1051L Windows 8.1 and I found out that the 3G modem doesn't work with the Vodafone Sim card, I've tried with Telekom Sim Card and it works, so the probably it's a compatibility issue since I've changed the Sim card from Vodafone with a new one and no luck, I've tried it in another very cheap tablet and it works just fine.I've also instaled the newest drivers, only the bios driver I didn't had the courage to install it.
    I've read on the reviews from amazon.de and it seems that i'm not the only one. Does anyone know how to solve this problem? Thanks in advance!

    This is a known problem and no solution yet, you can reflash the modem and gain a basic functionality with a vodafone ro sim, but only on hsdpa speed wich is crap for a 4G sim, i keept searching for a solution for a month now and no succes, i'm from ROU too, and support for us from lenovo is non existent as it seems.

  • It doesn´t work weblogic sever 10.3.2 with jeveloper 11.1.1.2.0 with Win 7

    Hi everyone, how must I configurate weblogic server with jdeveloper 11.1.1.2.0 on Windows 7 x86 ?
    I installed jdeveloper 11.1.1.2.0 with weblogic server 10.3.2 that comes in jdevstudio 11.1.1.2.0.
    JDeveloper works but when I am going to test any web application weblogic doesn´t work and the
    service never starts up.
    I have the next message:
    the system cannnot found the specified path
    Process Exited
    I have to set up any environment varialbes or I need any plugging.

    Hi,
    is there any more information than this ? Which path is it that the system cannot find ? Can you try installing JDeveloper into a directory that does not contain blanks ?
    Frank

  • JTabbedPane background color doesn't work in Win XP - SP 1 with JRE 1.4.2

    Setting background color for JTabbedPane doesn't
    work in "Windows XP with SP 1" when using JRE 1.4.2.
    For example, following call doesn't set the
    tab to green:
    tabbedPane.setBackgroundAt(0, Color.green);
    It always displays TABS with the white background.
    Is anybody aware of this problem?
    Thanks-in-advance for any help / suggestions!
    Sundar

    Thanks, bbritta and vairavan.
    I tried setOpaque also, but still doesn't work,
    On my system also:
    UIManager.getSystemLookAndFeelClassName() = com.sun.java.swing.plaf.windows.WindowsLookAndFeel
    I have given below the sample code that doesn't display tab color. Please let me know if you suspect something is wrong here, or any suggestions to make this work under Windows XP - Service Pack 1.
    Thanks,
    Sundar
    // CODE STARTS HERE
    import javax.swing.JTabbedPane;
    import javax.swing.ImageIcon;
    import javax.swing.JLabel;
    import javax.swing.JPanel;
    import javax.swing.JFrame;
    import javax.swing.JOptionPane;
    import javax.swing.UIManager;
    import java.awt.*;
    import java.awt.event.*;
    public class TEMP_TABBED_PANE extends JPanel {
    public TEMP_TABBED_PANE() {
    JTabbedPane tabbedPane = new JTabbedPane();
         tabbedPane.setOpaque(true);
    Component panel1 = makeTextPanel("Howdy");
    tabbedPane.addTab("One", panel1);
    tabbedPane.setSelectedIndex(0);
    tabbedPane.setBackgroundAt(0, Color.green);
    Component panel2 = makeTextPanel("Howdy Howdy");
    tabbedPane.addTab("Two", panel2);
    tabbedPane.setBackgroundAt(1, Color.yellow);
    Component panel3 = makeTextPanel("Howdy Howdy Howdy");
    tabbedPane.addTab("Three", panel3);
    tabbedPane.setBackgroundAt(2, Color.red);
    Component panel4 = makeTextPanel("Howdy Howdy Howdy Howdy");
    tabbedPane.addTab("Four", panel4);
    tabbedPane.setBackgroundAt(3, Color.cyan);
    //Add the tabbed pane to this panel.
    setLayout(new GridLayout(1, 1));
    add(tabbedPane);
    protected Component makeTextPanel(String text) {
    JPanel panel = new JPanel(false);
    JLabel filler = new JLabel(text);
    filler.setHorizontalAlignment(JLabel.CENTER);
    panel.setLayout(new GridLayout(1, 1));
    panel.add(filler);
    //panel.setOpaque(true); <<-- UNCOMMENTING THIS ALSO DOESN'T HELP :(
    return panel;
    public static void main(String[] args) {
    JFrame frame = new JFrame("Tabbed Pane Demo for Color");
    try {
    UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName());
    // UIManager.setLookAndFeel(UIManager.getCrossPlatformLookAndFeelClassName());
    JOptionPane.showMessageDialog(frame,
              "UIManager.getSystemLookAndFeelClassName() = " +
              UIManager.getSystemLookAndFeelClassName(),
              "Look And Feel",
              JOptionPane.INFORMATION_MESSAGE);
    catch(Exception e) {
    e.printStackTrace();
    frame.addWindowListener(new WindowAdapter() {
    public void windowClosing(WindowEvent e) {System.exit(0);}
    frame.getContentPane().add(new TEMP_TABBED_PANE(),
    BorderLayout.CENTER);
    frame.setSize(400, 125);
    frame.setVisible(true);
    // CODE ENDS HERE

Maybe you are looking for