Win PE x64: how to do a memory check?

Is there an automate-able way to do a memory check within WinPE x64?  All the tools I see out there are either 32-bit (and consequently won't run in WinPE).  I'm using WinPE from the Win7 OPK, amd64 architecture.

Is there an automate-able way to do a memory check within WinPE x64?  All the tools I see out there are either 32-bit (and consequently won't run in WinPE).  I'm using WinPE from the Win7 OPK, amd64 architecture.
The only x64 native tool that I'm aware of would be
Prime95 and then download the 64-bit client. While this is not per-se a memory diagnostic tool, when it's executed as a torture test you can use that mode to stress a system.
Other than that I don't know any solution for a native x64 app for WindowsPE.
Kind regards,
Stephan Schwarz.
If you one of these posts answered your question or issue, please click on "Mark as answer". If a post contained helpfull information, please be so kind to click on the "Vote as helpful" button :)

Similar Messages

  • Memory leak in Skype 7.4.0.102 on Win 7 x64

    Ever since upgrading to the latest version of Skype on my Win 7 x64 box, I've had nothing but issues with Skype having a huge memory leak.  It'll start out running fine when I boot up, hovering around 141K of memory usage (even though I think that's still higher than it should be), but after leaving it open for a while, it will just continue to creep up.  Yesterday I had to kill the Skype.exe*32 process from Task Manager because it was up to 1.2 GB of memory usage.
    Previously it had not gotten that high, but I have seen it as high as almost half a gig.  I've tried all the usual stuff, removing and reinstalling, making sure I'm running the latest version, etc.  The memory leak is still there.  Has anyone experienced this issue with 7.4.0.102?  If so, has anyone found any resolution?

    http://community.skype.com/t5/Windows-desktop-cl​ient/7-3-0-101-CPU-overload/td-p/3950990

  • How can I print to Officejet 6700 from Win XP x64 computer?

    Purchased the 6700 and conencted to network and prints from Win 7 laptops fine.
    My desktop workstation in HP Z600 running Win XP X64, but cannot seem to get a driver to suit to print over the network.
    I would prefer not to have to trash and replace the OS on the workstation!
    Is there a work-around or some sort of interface that I could use?
    My home network does have a little HP server, but it runs Win Server 2003, which is also incapable to connecting to the printer.
    This question was solved.
    View Solution.

    Hello GeorgeCurran,
    Please follow the below steps that should atleast get you printing ..
    Click START > Control Panel > Printers and Faxes  , then
    Add a Printer > Add a local printer > Select "Create a New Port" > type in the Printer's IP address Click NEXT,
    in the Manufacturing list , select HP / Hewlett packard, and from the right pane , select Deskjet 990c and complete the wizard .
    Now try printing, it should work. 
    Regards,
    Jabzi
    Help the community by marking this post .
    Was your question answered? Mark it as an Accepted Solution!
    See a great post? Give it a Kudos!
    I work for HP
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Macbook Pro Win 7 x64

    Hi, I have recently bought a MacBook Pro 2009 from a mate who sold it as faulty. The Apple store said it was a faulty Logic Board but couldn't say for certain what the problem was. Having experience with PCs I tried putting an old HDD in to test if it
    would work and it did. So I bought an SSD and installed Win 7 via Bootcamp.
    Last night I upgraded OSX to 10.9.4 Mavericks which installed okay, then I installed the upgrade to 10.9.5 and left it running when I went to work. When I got home I found the Mac had frozen at the login screen with a spinning multi-coloured wheel in the
    top left corner but the machine was unresponsive so I had to hold the power button down for 4 seconds to turn it off. After I restarted the update installed (again) successfully.
    In Win 7 here is the hardware specs of my Mac:
    System Manufacturer Apple Inc.
    System Model MacBookPro5,5
    System Type x64-based PC
    Processor Intel(R) Core(TM)2 Duo CPU     P7550  @ 2.26GHz, 2261 Mhz, 2 Core(s), 2 Logical Processor(s)
    BIOS Version/Date Apple Inc. MBP55.88Z.00AC.B03.0906151708, 15/06/2009
    Having heard OSX was rock solid I booted into Win 7 x64 and looked through the event logs and found these 2 errors which seem to be hardware related:
    Log Name:      System
    Source:        ACPI
    Date:          22/09/2014 18:53:00
    Event ID:      13
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      User-PC
    Description:
    : The embedded controller (EC) did not respond within the specified timeout period. This may indicate that there is an error in the EC hardware or firmware or that the BIOS is accessing the EC incorrectly. You should check with your computer manufacturer
    for an upgraded BIOS. In some situations, this error may cause the computer to function incorrectly.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="ACPI" />
        <EventID Qualifiers="49157">13</EventID>
        <Level>2</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-09-22T17:53:00.173600000Z" />
        <EventRecordID>4965</EventRecordID>
        <Channel>System</Channel>
        <Computer>User-PC</Computer>
        <Security />
      </System>
      <EventData>
        <Data>
        </Data>
        <Binary>0000C00001000000000000000D0005C0000000000000000000000000000000000000000 000000000AB9B21001101FFFF7100020011000A008100A800A1080B021100090011020E004121020 016088A03A618891F161A14003680050015180C001018C600600005009001A60070000500101A0A0
    08000070030830200151007002180070011117602A1134D111110090011120E00412102001618280 0A6032D00161A0E00368002001518060000000000000000000000000000000000000000000000000 0000000000000000000000000000000000000000000000000000000000000000000000000</Binar y>
      </EventData>
    </Event>
    and
    Log Name:      System
    Source:        Microsoft-Windows-HAL
    Date:          22/09/2014 10:38:15
    Event ID:      12
    Task Category: None
    Level:         Error
    Keywords:      (1)
    User:          N/A
    Computer:      User-PC
    Description:
    The platform firmware has corrupted memory across the previous system power transition.  Please check for updated firmware for your system.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-HAL" Guid="{63D1E632-95CC-4443-9312-AF927761D52A}" />
        <EventID>12</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000001</Keywords>
        <TimeCreated SystemTime="2014-09-22T09:38:15.186000000Z" />
        <EventRecordID>4556</EventRecordID>
        <Correlation />
        <Execution ProcessID="4" ThreadID="4440" />
        <Channel>System</Channel>
        <Computer>User-PC</Computer>
        <Security />
      </System>
      <EventData>
        <Data Name="Count">1</Data>
        <Data Name="FirstPage">143</Data>
        <Data Name="LastPage">143</Data>
      </EventData>
    </Event>
    could somebody point me in the right direction as to how to resolve these issues? My Machine has been upgraded to 8gb ddr3 1333mhz and a 240gb Kingston SSD 6Gbps. I think this version of the Mac only supports 1.5Gbps sata bus, I have downloaded a driver
    from apple to upgrade the EFI to install faster storage to the 3.0Gbps but they do not support it so I am unsure if installing it will be a good idea.
    Thanks for reading.
    Darren
                            MacBook Pro, Windows 7, OSX 10.9.5

    Hi,
    According to the Event Log:
    Hardware Abstraction Layer (HAL) error related. Generally speaking, this probably caused by Hardware problem. It would be better to contact Apple Service Center for further assitance.
    Roger Lu
    TechNet Community Support

  • MBPro Win 7 x64 Errors

    Hi, I have recently bought a MacBook Pro 2009 from a mate who sold it as faulty. The Apple store said it was a faulty Logic Board but couldn't say for certain what the problem was. Having experience with PCs I tried putting an old HDD in to test if it would work and it did. So I bought an SSD and installed Win 7 via Bootcamp.
    Last night I upgraded OSX to 10.9.4 Mavericks which installed okay, then I installed the upgrade to 10.9.5 and left it running when I went to work. When I got home I found the Mac had frozen at the login screen with a spinning multi-coloured wheel in the top left corner but the machine was unresponsive so I had to hold the power button down for 4 seconds to turn it off. After I restarted the update installed (again) successfully.
    In Win 7 here is the hardware specs of my Mac:
    System Manufacturer Apple Inc.
    System Model MacBookPro5,5
    System Type x64-based PC
    Processor Intel(R) Core(TM)2 Duo CPU     P7550  @ 2.26GHz, 2261 Mhz, 2 Core(s), 2 Logical Processor(s)
    BIOS Version/Date Apple Inc. MBP55.88Z.00AC.B03.0906151708, 15/06/2009
    Having heard OSX was rock solid I booted into Win 7 x64 and looked through the event logs and found these 2 errors which seem to be hardware related:
    Log Name:      System
    Source:        ACPI
    Date:          22/09/2014 18:53:00
    Event ID:      13
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      User-PC
    Description:
    : The embedded controller (EC) did not respond within the specified timeout period. This may indicate that there is an error in the EC hardware or firmware or that the BIOS is accessing the EC incorrectly. You should check with your computer manufacturer for an upgraded BIOS. In some situations, this error may cause the computer to function incorrectly.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="ACPI" />
        <EventID Qualifiers="49157">13</EventID>
        <Level>2</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-09-22T17:53:00.173600000Z" />
        <EventRecordID>4965</EventRecordID>
        <Channel>System</Channel>
        <Computer>User-PC</Computer>
        <Security />
      </System>
      <EventData>
        <Data>
        </Data>
        <Binary>0000C00001000000000000000D0005C0000000000000000000000000000000000000000 000000000AB9B21001101FFFF7100020011000A008100A800A1080B021100090011020E004121020 016088A03A618891F161A14003680050015180C001018C600600005009001A60070000500101A0A0 08000070030830200151007002180070011117602A1134D111110090011120E00412102001618280 0A6032D00161A0E00368002001518060000000000000000000000000000000000000000000000000 0000000000000000000000000000000000000000000000000000000000000000000000000</Binar y>
      </EventData>
    </Event>
    and
    Log Name:      System
    Source:        Microsoft-Windows-HAL
    Date:          22/09/2014 10:38:15
    Event ID:      12
    Task Category: None
    Level:         Error
    Keywords:      (1)
    User:          N/A
    Computer:      User-PC
    Description:
    The platform firmware has corrupted memory across the previous system power transition.  Please check for updated firmware for your system.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-HAL" Guid="{63D1E632-95CC-4443-9312-AF927761D52A}" />
        <EventID>12</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000001</Keywords>
        <TimeCreated SystemTime="2014-09-22T09:38:15.186000000Z" />
        <EventRecordID>4556</EventRecordID>
        <Correlation />
        <Execution ProcessID="4" ThreadID="4440" />
        <Channel>System</Channel>
        <Computer>User-PC</Computer>
        <Security />
      </System>
      <EventData>
        <Data Name="Count">1</Data>
        <Data Name="FirstPage">143</Data>
        <Data Name="LastPage">143</Data>
      </EventData>
    </Event>
    could somebody point me in the right direction as to how to resolve these issues? My Machine has been upgraded to 8gb ddr3 1333mhz and a 240gb Kingston SSD 6Gbps. I think this version of the Mac only supports 1.5Gbps sata bus, I have downloaded a driver from apple to upgrade the EFI to install faster storage to the 3.0Gbps but they do not support it so I am unsure if installing it will be a good idea.
    Thanks for reading.
    Darren

    Your 13" June 2009 MBP needs 4.0.4033.
    From Boot Camp Support Software 4.0.4033 System Requirements...
    Post Date: Mar 14, 2013
    File Size: 601.76
    System Requirements
    MacBook (13-inch, Late 2006)
    MacBook (13-inch, Mid 2007)
    MacBook (13-inch, Late 2007)
    MacBook (13-inch, Early 2008)
    MacBook (13-inch, Late 2008)
    MacBook (13-inch, Early 2009 & Mid 2009)
    MacBook (13-inch, Late 2009) *
    MacBook (13-inch, Mid 2010) *
    MacBook Air (13-inch, Early 2008)
    MacBook Air (13-inch, Late 2008 & Mid 2009)
    MacBook Air (11-inch & 13-inch, Late 2010) *
    MacBook Pro (15-inch & 17-inch, Core 2 Duo)
    MacBook Pro (15-inch & 17-inch, 2.2 & 2.4GHz)
    MacBook Pro (15-inch & 17-inch, Early 2008) *
    MacBook Pro (15-inch, Late 2008) *
    MacBook Pro (17-inch, Early 2009 & Mid 2009) *
    MacBook Pro (15-inch, Early 2009) *
    MacBook Pro (13-inch and 15-inch, Mid 2009) *
    MacBook Pro (13-inch,15-inch, and 17-inch, Mid 2010)
    MacBook Pro (13-in, 15-inch, and 17-inch, Early 2011 & Late 2011)
    Mac Pro (Mid 2006)
    Mac Pro (Early 2008) *
    Mac Pro (Early 2009)
    Mac Pro (Early 2007)
    Mac Pro (Mid 2010)
    Mac Pro (15-inch and 17-inch, 2.2 & 2.4GHz)
    Mac mini (Mid 2007)
    Mac mini (Early 2009 & Late 2009)
    Mac mini (Mid 2010) *
    iMac (17-inch, Late 2006)
    iMac (20-inch, Late 2006)
    iMac (24-inch, Late 2006)
    iMac (20-inch & 24-inch, Mid 2007)
    iMac (20-inch & 24-inch, Early 2008)
    iMac (20-inch, Early 2009 & Mid 2009)
    iMac (21.5-inch & 27-inch, Late 2009) *
    iMac (27-inch, Late 2009) *
    iMac (21.5-inch, Mid 2010) *
    iMac (27-inch, Mid 2010)
    iMac (21.5-inch, Mid 2011 & Late 2011)
    iMac (27-inch, Mid 2011)
    all these drivers support Windows 7, 32 bit
    * drivers that support Windows 7, 32 and 64 bit

  • PSE 9 only works with old AIR version on Win 7 x64. Adobe please help.

    I'm hoping that Adobe can jump in and help here as there are some real versioning issues with the components that PSE 9 uses.  I've made a number of posts in the Adobe AIR forum (while I was figuring this out) and have exchanged with Adobe resources regarding my problems with Adobe AIR on Win 7 x64. They are still looking into it.
    PSE 9.0 comes with
         Adobe AIR 1.5.3.9130,
         Adobe Community Help 3.2.1.650 (an AIR app), and
         Adobe Photoshop.com Inspiration Browser 3.07 (an AIR app)
    That  Adobe AIR 1.5.3.9130 is an old version of AIR.  Since then there have been production releases 2.0.2, 2.0.3, and the latest 2.0.4.  If you upgrade to ANY of those Adobe AIR 2.x versions on your Win 7 x64 system, ALL your Adobe AIR apps will stop working.
    Adobe Community Help 3.2.1.650 is an out-of-date version and it continually nags you to update to the newer version.  If you do that, the install will first upgrade Adobe AIR to 2.0.4 and then upgrade Help.  Help will no longer work and all Adobe AIR apps will not work.
    I have installed and uninstalled PSE 9 about 25 times, I have installed and ununinstalled different versions of AIR over 50 times, etc. etc. to come to these conclusions.  I have tested Adobe AIR 2.0.2, 2.0.3 and 2.0.4 and NONE of them work on Win 7 x64.
    I'd really like someone from the Adobe PSE team to look into this.  I don't have time to spend hours on the phone with support.  I have described the problem and can offer more details as necessary.
    Thanks . . . . Brian

    Ankush,
    Thank for your two responses.  I have also received some more emails from Chris Campbell around AIR in particular so I'll try to work with him first.
    Thanks you for confirming that you do not see any errors after installing the updates.  Also that Adobe Help and Inspiration Browser both work after updating AIR to 2.0.4.
    I will answer your questions for now though:
    1. You asked:
    Have you tried this:
    Uninstall PSE 9, PRE 9 and any other CS5 Adobe application.
    Uninstall Adobe AIR.
    Install PSE 9 and run the updates of Adobe AIR and now use the applications?
    If it still gives error, uninstall Adobe AIR and then install the 2.0.4 version directly which is available on Adobe.com.
    What happends now?
         Yes, I have done all of these combinations a few times without success.
    2. The directories for Adobe Help and PIB look fine.  They are
        C:\Program Files (x86)\Adobe\Adobe Help
        C:\Program Files (x86)\Adobe\PhotoshopdotcomInspirationBrowser
    As I said, Chris Campbell has asked me for info and to run some tests.  I'll let you know how it works out.
    Thanks . . . . Brian

  • How to enable the memory remapping in the bios?

    How to enable the memory remapping in the bios?
    my laptop: m100 psmaaq-00s003

    Without removing a specific Windows Update KB Patch, and two registry keys, you CANNOT uninstall the Flash Player ActiveX Plug-in for IE in Win 8.
    Microsoft released a new update for Flash Player in IE just the other day.
    Have you run Windows Update recently?

  • Share printer Win 7 x64 to XP SP3

    My main computer, to which my printer (Epson PX710W) is connected, is running Win 7 x64. I want to share this printer with my wife's remote computer running XP SP3. Network Magic (5.5.5195) just gives a 'Printer cannot be shared' error message. Since there was no problem sharing this printer when I was running 32 bit Win 7, I assume the problem is the 64\32 bit dichotomy. How do I go about solving this? Do I need, for example, to install printer drivers on the XP box, and if so, do I need the 32 or 64 bit version? And how do I go about installing drivers for a printer that is not physically present on the machine?
    Router WRT160N

    wapanap wrote:
    My main computer, to which my printer (Epson PX710W) is connected, is running Win 7 x64. I want to share this printer with my wife's remote computer running XP SP3. Network Magic (5.5.5195) just gives a 'Printer cannot be shared' error message. Since there was no problem sharing this printer when I was running 32 bit Win 7, I assume the problem is the 64\32 bit dichotomy. How do I go about solving this? Do I need, for example, to install printer drivers on the XP box, and if so, do I need the 32 or 64 bit version? And how do I go about installing drivers for a printer that is not physically present on the machine?
    Router WRT160N
    Hi wapanap,
    If your Printer is capable of running Wirelessly or being plugged into the Router, instead of the computer, I would either run Wirelessly or plug the printer into the Router instead of the computer.
    This fixes the problem of connecting through different operating systems.
    Simply install the software for the printer / all-in-one on each computer.
    thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
    Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

  • MSI GTX970 Gaming 4g Win 8.1& Win 10 x64 error code 43

    Good day. I`ve changed my gtx 770 OC from gigabyte to msi 970 gaming 4g. After windows loaded i have exclamation on gtx 970 in device manager - error code 43. Tried clean install new drivers with DDU. Tried all driver from 344.11 to 344.80. Updated bios for my mobo and video. Reinstalled win 8.1 x64  and win 10 tp - same error :( I was thinking that my card is dead and tried to install win 7 x64. And it works perfectly in win 7, no errors.
    Any thoughts how i can make it work in win 8.1 ? (tried to turn of gen3, standby and etc in bios. Hypervisor is not active in win 8.1 too)
    My Pc:
    cpu i4670k
    mobo z87p-d3 (f8 bios)
    ram 2x4gb kingston
    video msi gtx970 gaming 4g ( latest bios)
    psu zalman zm600-gsII
    1 ssd and 3 hdd

    sounds like there is some kind of compatibility issue
    have you tried MSI VGA drivers from smi web for your card?
    else ask your mainboard vendor for bios update
    other options/tips:
    * tell S/N of your card and save and upload its current vbios to check for updates
    * test the card in another computer with Win8.1 OS to verify if will works there

  • How to overcome the Memory leakage issue in crystal report 2008 SP2 setup.

    I have developed the small windows based application tool with help of  Visual studio 2008 for identify the memory consumption of crystal report object. It helps to load the crystal report objects in the memory and then released the object from the memory. The tool simply does the u201CLoading and Unloadingu201D the objects in the memory.
    The tool will be started once u201CTest_MemoryConsumption.Exeu201D executed. The u201CTest_MemoryConsumption.Exeu201D consumes u201C9768 KBu201D memory before load the crystal report object in memory. It means, 9768 KB is normal memory consumption for run the tool.
    Crystal report object initiated by the tool and object help to load the report in memory once the tool initiated the crystal report object. Now u201CTest_MemoryConsumption.Exeu201D consumes u201C34980 KBu201D memory during the crystal report object creation and report load process. The actual memory consumption of crystal report object is 34980u20139768=u201C25212u201DKBu201D. 
    The memory consumption u201C34980 KBu201D will be continued till the end of the process. The memory consumption will be reduced to u201C34652 KBu201D from u201C34980 KBu201D once report load process completed. It means, u201C328 KBu201D memory only released from the memory consumption. Tool enables the Release command for the crystal report object. But crystal report object does not respond to the command and will not release his memory consumption.
    The memory consumption u201C34652 KBu201D will be stayed in the memory once job ends.  If i again initiate the crystal report object then it crystal report object start to consume the memory from 34652 KB.
    Database objects and crystal report objects are properly used in the tool. The object release commands properly  communicated to crystal report setup. But the u201CCrystal report service pack 2u201D setup unable to respond the commands which has enabled from .Net Tool.  Crystal report objects are properly initiated and disposed in the tool. But the crystal report unable to release from the server.
    The memory consumption will be reduced once the server restarted or kill the application.
    Crystal report 2008 and crystal report 2008 SP2 setup available in the server.
    Microsoft .Net Framework 2.0 SP2, Microsoft .Net Framework 3.0 SP2 and Microsoft .Net Framework 3.5 SP1 are available in the server,
    Could you please suggesst how to avoid the memory consumption keep increasing and  how to release the memory consumption  once the crystal object disposed???

    Hi Don..
    My case is different one. I hope, the problem with Run time Installation setup file (Crystal report 2008 Serivce Pack2 installer) which we installed in the server.
    Let me explain with Live scenario which our client faced in crystal report 2008 Service pack2 Installer.
    Our client is using a application to help to print their reports. The application is developed with Windows service.
    Windows service keep on running in the server. Windows service executes the client 's crystal reports( Labels Report, Stock  report) which designed for clients need and the reports will be printed from printer. 
    10 Same type report (Label Report) will be printed in 1 minute. Reports are not printing during non business hours. But the windows service keep on running.  Memory cosumption of application will be 160 MB in business hours.
    For Example, On Monday the application memory consumption starts with 160 MB. The Memory consumption will be reached 165 MB  in peak business hours. Then the memory will be ended in163 MB in the End of Monday. It means, The memory consumption will be in 163 MB during the non business hours. Reports will not be printed in non business hours.
    On Tuesday, the application memory consumption starts with 163 MB and it will be reached 168 MB during the peak hours. The Memory consumption will be ended in 165 MB in the end of Tuesday.  The same process contiues till friday. End of friday, the memory consumption of the application will be ended with 170 MB.
    Application Memory Consumption slowly increasing in the server. In 5 days, Memory consumption reached Threshold value (170 MB) of the server. Application gets hanged up once the memory consumption reached 170 MB. We got the error messages as "Attempted to read write protected memory " / "Not Enough memory for process".  If we restart server / If we restart the service then memory consumption of application get reduced to 160 MB.
    From the above scenario, We came know that the either the problem with Application object or the problem crystal report object. In the application, We have checked dispose methods of application objects completly. I am sure that  application objects are properly disposed in the application. I hope the problem not with application objects. The problem with Crystal report objects.
    Application properly communicates the dispose methods to crystal report objects. Crystal report objects are not released from
    the memory.
    Crystal report 2008 Serive Pack 2 setup installed in the server. 
    As you said, If Crystal report runtime is not released from memory then memory consumption keep increase???  In service oriented architecture application, how to unload the crystal report runtime??
    Do you any fix for this kind of issue??
    Willl Crystal report 2008 service pack 3 help on this issue??

  • I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?  Next in Elements 11, how do I load and print different pictures and different sizes options on the same page?

    I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?  Next in Elements 11, how do I load and print different pictures and different sizes options on the same page?
    Thanks,
    Shir

    sbmgrams wrote:
    I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?
    See here:
    Reading PhotoDeluxe PDD Files

  • How do I add memory to my mac pro

    How do I add memory to my mac pro?

    www.apple.com/support/macpro
    www.macsales.com/memory/macpro
    Find the Mac Pro model, type of RAM, then compatible RAM.
    But you get further if you show some details of what you have now and plan for.
    www.macperforomanceguide.com - check articles on memory and performance

  • How do I add memory to a MacBook Pro?

    How do I add memory to my MacBook Pro?

    You have to open the bottom cover of the MBP to get to the memory slots.  There are about 10 very small screws around the perimeter, some of which are longer than others so you have to be very careful not to mix them up when you take the cover off.  You will need a very small phillips-head screwdriver (small jewelers size).   Once you have removed the screws you may have to gently pry the cover off (there is some sticky stuff inside).  You will then see the RAM slots more or less in the middle of the computer.
    The booklet that came with your MBP has instructions about how to insert/remove the RAM SODIMMs ... there is a plastic tab on each side of the SODIMMs that you push outward and the RAM will pop up slightly ... you can then gently pull it out.   Note there is a slot cut in the pin edge of the SODIMMs ... remember it's orientation so you put the new RAM in the same way.  It only goes in one way.
    It's wise to use the crucial.com Memory Advisor first so you get the exact kind & amount of RAM that is compatible with your MBP.

  • How do I install memory into the Pavilion 17z-F2 series laptops?

    How do I install memory into the Pavilion 17z-F (17z-F200, product L2H13AV) series laptops?
    HP appears to have no maintenance guide available for this model series. What's up with that?
    Please, do not offer the generic (and out-of-date) Pavilion 17 Notebook PC Maintenance and Service Guide. It does not appear to apply to the 17z-F series. This guide instructs to remove the bottom service panel which I could have figured that out on my own. However, the 17z-F series does not appear to have any removable panels at all. I took an up-close look at the Pavilion 17z-F100. And, it does not have any removable panels on the underside, except for the battery. So, I presume the 17z-F200 to be the same.
    I am a computer technician. And, this is the first laptop I have seen without any service panels. I am probably going to have to disassemble the entire outer-shell to install memory (or to replace the hard disk drive once the time comes). But, every laptop I have worked on in the past had its own special array of hidden screws or special tricks for disassembly. So, having a maintenance guide is a necessity to avoid damaging plastic mounts, clips, guides, etc.
    This question was solved.
    View Solution.

    How about this one:
    Pavilion 17z Manual
    Don't get me started on this. It's one of my pet peeves, too. HP is not the only one doing this. Acer and Toshiba, etc. also are selling "closed" systems now. I hate it. I will absolutely never knowingly buy one but I am spending a lot of time here answering questions just like this. Good luck and let us know how you do. Sounds like you will be fine. 
    If this is "the Answer" please click "Accept as Solution" to help others find it. 

  • Win 7 x64 LJ2100tn network install

    I could use some new ideas about installing a Laserjet 2100tn through a network with a Linksys wrt54GS router. Printer works fine on network through XP, with 3 desktops, 1 laptop and 1 netbook.  Tried the HP network diagnostic through XP and it can't find the printer - used Ping and telnet to i.p. address and they can't find it either - but printer WORKS fine. Looks like the printer currently runs under IPX.
    In Win 7 x64 I tried all the new drivers from HP, and installation for PCL 5, 6 and PS but the printer installation routines can't find the printer. Deleted and re-installed about a billion times (roughly) in the last week. Updated router firmware, and drivers for motherboard and ethernet connection.
    I won't switch to Win 7 until I work out some fix for this.
    Thanks to all that can send suggestions.  
    Duff2424

    Try accessing the embedded web server by typing the IP address of the printer in a browser on the PCs. Maybe a firewall on the PC is interfering with the HP software finding the printer and with ping. You could also try temporarily turning off any/all firewall software running on the Win 7 PC to see if this might be the problem.
    You could also try HP's free Webjet Admin software to see if it helps with finding the printer or diagnosing the problem.
    http://h20338.www2.hp.com/Hpsub/cache/332262-0-0-225-121.html
    Also, a few notes for what they are worth:
    1) Window 7 doesn't support IPX (so if you are really trying to use IPX and not using additional software to provide IPX support on the PC, that could be a problem). But the standard TCP port for HP printers is 9100, the software should be trying to send PCL to port 9100 (when it can find the printer). I believe the network implementation in this printer does support IPX and so it could very well be what the XP PCs were set up to use.
    2) This printer uses a JetDirect card for networking. The network diagnostic that I think you are referring to was designed for inkjet printers which use a different networking implementation (mostly the same functionality but different implementation), so this diagnostic might have some troubles working with this printer.
    Hope something here is helpful.
    -David
    (I'm an HP employee, but I am speaking just for myself and not HP.)

Maybe you are looking for