Win QT7 & interactive movies : Internet explorer gets in the way reasonless

A problem when trying to see interactive quicktime movies in windows QT7 :
each time i click on an active zone on the movie, i get an error message telling me that Internet Explorer can't find the movie(path). and a blank IE window opens.
Other than that the movie reacts and plays fine, but each click on it makes it necessary to click twice in order to keep viewing the content (once for dissmissing the dialog box, an one other to close the appearing IE window)
therefore it's absolutely un-usable.
I urgently need a fix for that : the movies are all made on a mac with keynote, and this issue is not codec-related.
For mysterious reasons, IE thinks it's involved when a click is made on the movie...
On the other hand, opening the same movie INSIDE an IE windows through the IE plug-in works like a charm.
But the CDs i Design are autorun and use quicktime, not IE, i can not tell my clients they have to go though the harrassing steps to get to the movie file and open it manually in IE (plus they where designed to be full screen...)
It worked fine with QT6 (but for many a reasons i need my clients to have QT7 installed)
HEEEEEEEEElP !

Have you sent feedback?
This is a problem that affects Keynote users as well, so they've been sending feedback. If the problem is easily reproducible (and it is) so that they don't need additional information form you, you'll probably not receive any response.
These forums are for user to user support only, so that's why you won't get any response from Apple here.

Similar Messages

  • When downloading a large file, like a movie Internet Explorer automatically provides one with the choice of where to save it - e.g. "C" drive, but Firefox doesn't. How can it be done?

    When downloading a large file, like a movie, Internet Explorer automatically opens a download window offering the choice to "Open" or "Save"the file. This provides one with the choice of where to save it - e.g. "C" drive, in the "My Documents" or "Desktop" folders but Firefox's download window doesn't. This has always frustrated me because I would rather use Firefox exclusively to access the Internet, but when it comes to saving files downloaded off the Internet, sadly, I have to revert to IE!

    If you click on Firefox from the upper-left, then Options, a new window should appear. On that window, click on the general tab. In the middle of the window, you'll see options regarding your downloads, one of which says, "Always ask me where to save files." Click on the bubble for this options, then click Ok. From then on, you should always be prompted on where you want your files saved.

  • Interaction with Internet Explorer

    Can I somehow interact with Internet Explorer with/from a J2SE application.
    I am looking for a way to open a URL from my Java application, and then enter a username and password in the login form on that URL.
    What about Java Native Interface?
    If it can not be done with a J2SE application, What about a J2SE Applet ?
    I am trying to develop a Single Sign-On mechanism/procedure using Java.

    I actually worked on something similar for a former dot-bomb. The issue you will run into is that there is no common standard for logons. Some forms will use 'user' others 'userid' others 'email', likewise for 'password', 'pw', 'pwd', etc. So, you will have to maintain a database of the various sites' login form submission values. We have not even started to touch the ease and frequency with which sites can change the URL used for authentication. So, it becomes a 'n' problem. The more sites you support, the more useful your service will be. However, the more sites you support, the higher your maintenance costs will be.
    The one interesting workaround we did think of was to register at every site we supported (at the time, nearly everything was free, so this was relatively viable). We would then have a nightly batch process that would attempt to authenticate to each site automatically. Any HTTP response other than 200 would be deemed a failure, and someone would have to look into it the next morning.
    So, on a technical level, the solution is really simple. On a practical level, you will be very busy.
    - Saish

  • IE browser and Web Cache and SSL - Internet Explorer cannot display the web page

    When using IE8, IE9, or IE10 with Web Cache and SSL certain pages which display a lot of data returns the error - "Internet Explorer cannot display the web page."
    if we eliminate SSL but continue to use Web Cache, the error does *not* reproduce & If we eliminate Web Cache altogether the error again does *not* reproduce.  The error is only reproducible when we use SSL with Web Cache and if we use IE and we access *large* pages. The error is not reproducible with Firefox or Chrome. This is a Web Tier 11.1.1.7 installation with WebLogic 10.3.6 & Red Hat Enterprise 5 Linux x86-64
    Event_log shows below errors.
    [2013-06-13T16:34:35-04:00] [webcache] [NOTIFICATION:1] [WXE-09002] [logging] [ecid: ] Generated by Oracle Web Cache on Thu Jun 13 16:34:35 2013 - Build 11.1.1.7.0 130113.0721
    [2013-06-13T16:34:36-04:00] [webcache] [NOTIFICATION:1] [WXE-08513] [logging] [ecid: ] Cache server process ID 4469 is starting up.
    [2013-06-13T16:34:36-04:00] [webcache] [NOTIFICATION:1] [WXE-09612] [main] [ecid: ] Oracle Web Cache 11g (11.1.1.6), Build 11.1.1.7.0 130113.0721
    [2013-06-13T16:34:37-04:00] [webcache] [NOTIFICATION:1] [WXE-13002] [config] [ecid: ] Maximum allowed incoming connections are 1000
    [2013-06-13T16:35:00-04:00] [webcache] [NOTIFICATION:1] [WXE-09441] [stats] [ecid: ] DMS enabled
    [2013-06-13T16:35:28-04:00] [webcache] [NOTIFICATION:1] [WXE-12209] [cluster] [ecid: ] A 1 node cluster successfully initialized
    [2013-06-13T16:35:29-04:00] [webcache] [NOTIFICATION:1] [WXE-09614] [main] [ecid: ] The following Oracle Web Cache internal files are pre-populated to the cache: [[
            /nssb-p.adm.fit.edu:7785/_oracle_http_server_webcache_static_.html
            /nssb-p.adm.fit.edu:4448/_oracle_http_server_webcache_static_.html
    [2013-06-13T16:35:29-04:00] [webcache] [NOTIFICATION:1] [WXE-09614] [main] [ecid: ]  [[
    The following Oracle Web Cache internal files are pre-populated to the cache: [[
            /nssb-p.adm.fit.edu:7785/_oracle_http_server_webcache_checkserviceavailability_.html
            /nssb-p.adm.fit.edu:4448/_oracle_http_server_webcache_checkserviceavailability_.html
    [2013-06-13T16:35:29-04:00] [webcache] [NOTIFICATION:1] [WXE-09608] [main] [ecid: ] The cache server process started successfully.
    [2013-06-13T16:35:29-04:00] [webcache] [WARNING:1] [WXE-12104] [utl] [ecid: ] Oracle Web Cache process has page faulted
    [2013-06-13T16:44:22-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-29049
    [2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: The record type is unknown.
    [2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Remote IP [163.118.22.16]:55145
    [2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Local IP 163.118.170.70:4448
    [2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: SSL error during handshake (details: internal=The record type is unknown. system=Success)
    [2013-06-13T16:44:27-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-29049
    [2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: The record type is unknown.
    [2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Remote IP [163.118.22.16]:55144
    [2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Local IP 163.118.170.70:4448
    [2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: SSL error during handshake (details: internal=The record type is unknown. system=Success)
    [2013-06-13T16:44:27-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-29049
    [2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: The record type is unknown.
    [2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Remote IP [163.118.22.16]:55148
    [2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Local IP 163.118.170.70:4448
    [2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: SSL error during handshake (details: internal=The record type is unknown. system=Success)
    [2013-06-13T16:44:35-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
    [2013-06-13T16:44:35-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    [2013-06-13T16:45:18-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:45:18-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    [2013-06-13T16:45:22-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
    [2013-06-13T16:45:22-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
    [2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    [2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    [2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    [2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    [2013-06-13T16:45:41-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:45:41-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    Any help or suggestions are greatly appreciated
    Tnx a lot,
    Lokesh

    Hello ,
    Try Below Workarounds:
    Workaround 1:
    Open Central Admin
    àApplication Management  à
    Configure Alternate access mapping-->Edit your web application zone and add your server name in Intranet zone. So default can be serverIP and intranet could be servername.
    Workaround 2:
    Might be there is some issue with DNS and try to check that WebApplication is pointing to correct IP or not.  
    Also try to access your Sharepoint site using ip Address .. If you still gets error Kindly share the logs .. 
    Best
    Regards Kuldeep Verma
    Please remember to click "Mark As Answer"
    if a post solves your problem or "Vote As Helpful" if it was useful.

  • Not able to work in internet explorer due to the contents not expanding

    Hi.
    When am clicking + symbol gets changed - but not showing any links content , under the + symbol there is some links are there but as our system system is windows xp internet explorer 7 

    under the + symbol there is some links 
    See if you can view them without CSS, e.g. using View, Style, No Style (Alt-V y N)
    Robert Aldwinckle

  • Safari Message: "Internet Explorer Cannot Display the Web Site" ?!?!?

    Safari is running strangely on my new MacBook Pro. It has decided to NOT automatically add .com
    when I type an address ..... THEN, when it can't find the website I get the message
    "Internet Explorer Cannot Display the Web Site". ***.
    Could the IE I am using when I'm using Windows XP (via Bootcamp) have corrupted Safari somehow?
    Ideas, please! Thanks.

    I found that the DNS settings in system prefs> networks > advanced had been mysteriously changed to something rather "foreign". An archive and Install solved the problem. Did your client happen to install a program called "Glim" (a Safari "enhancer"). That's our suspect.

  • Internet Explorer cannot display the webpage error urgent!

    Hi,
    I have created a OAF page. am displaying some report data in the page. The VO query is executing more thatn 20 min to get the records after tuning.
    Now my problem is, am getting the error "Internet Explorer cannot display the webpage" in 10 mins after the VO query execution started. However, the DB session for this query is still executing at the backend and I am unable to get the same OAF page until the DB session completes.
    Could you please help me in this?
    Thanks,
    Raja.

    Raja,
    There are two options here :
    1) The correct one is to go via concurrent program , because as per web standards a web page should not take max of 3-4 minutes to render.
    2) If you still wanna go via your present approach, you need to set profile ICX:Session Timeout which specifies Maximum idle time for the Oracle Applications user session(specified in minutes).
    --Mukul                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Reporting IAC - Internet Explorer cannot display the webpage error

    Hello
    We are working on ECC 6, EHP 3, MSS Reports using LaunchPad.
    When we try to see the report results, it gives us following error at below URL:
    http://domain.com:50000/irj/servlet/prt/portal/prteventname/navigate/prtroot/pcd!3aportal_content!2fevery_user!2fgeneral!2fdefaultDesktop!2fframeworkPages!2fframeworkpage!2fcom.sap.portal.innerpage!2fcom.sap.portal.contentarea?NavigationTarget=ROLES%3A%2F%2Fportal_content%2Fcom.sap.pct%2Fline_manager%2Fcom.sap.pct.erp.mss.bp_folder%2Fcom.sap.pct.erp.mss.roles%2Fcom.sap.pct.erp.mss.manager_self_service%2Fcom.sap.pct.mss.hcm.rpt.iac&ApplicationParameter=S%3DMSS0%26F%3D*HISRETQTA++5%26B%3D20100329%26E%3D20100329%26V%5B1%5D%3DMSS_RPT_SEL_PD1%26OV%3DMSS_RPT_SEL_PD%26R%3D4365AF4B40472508E10000000A000326&CurrentWindowId=WID1269788098656&NavMode=1 
    Internet Explorer cannot display the webpage
    Most likely causes:
    You are not connected to the Internet.
    The website is encountering problems.
    There might be a typing error in the address.
    - I am connected to Net very well.
    - Not sure abt website problems
    - address shown in the address bar is mentioned above
    Any idea what is wrong? We were earlier getting IAC exception, and added the permissions to overcome it.
    Reagrds
    Yash

    HI Yash,
    Please follow this link http://help.sap.com/saphelp_erp2004/helpdata/en/0c/c28c4024d26e1de10000000a1550b0/frameset.htm.
    It will solve your problem. Also make sure that you will give READ access to the end user on this folder.
    In case you are still facing with issue, do let us know.
    Cheers,
    AB

  • WRT300N v1 Internet Explorer cannot display the webpage

    An intermittent problem occurs where occasionally during browsing the web I'll get an Internet Explorer "cannot display the webpage" and then I reload the page and often it works on the reload.  The problem is very frequent and so nearly every webpage I try to open I have to reload in order to access it. 
    A temporary fix is unplugging the WRT300N v1 and plugging it back in.  For a while, it works fine, but eventually the problem creeps up again.
    I have firmware v 1.03.3
    I've got two laptops, one Mac running OS 10.x and one Dell running Vista.  I also have a desktop PC running XP.  The two laptops use the wireless connection.  The PC uses a wired connection.  All 3 computers experience this same problem browsing web pages.
    I've  read the forums and mostly I've seen people talking about problems with the WRT300N v1 as far as the wireless connection, but this time I'm having issues even with the wired connection, so I feel that this issue isn't addressed, or at least I haven't found where it was addressed.
    How do I fix this issue permanently?

    I too am having the same problem. I used another system with IE7 installed and found that many sites that were "unable to be displayed" were accessed with IE7 on a differant computer system running Windows XP.
    I realize it could be a router thing as well....but after i went through all the tech help i could find online it still did not solve the problem. I decided to work it out myself.
    I found my solution when trying to go to sites with mp3 files on them.  Thats when i discovered that with Windows Vista I had to manually select what program applications would be used to perform IE7 features (webpage content) in order for the pages to load properly.
    To do this in Windows Vista - just go to Start / Program Defaults / Set Program Access and defaults  From there you can select which programs to open if IE7 cant handle the file extention on its on.  That was my problem all along.
    You may have to go as far as setting your file associations in Windows Explorer.  Windows Vista had set the file extension .php to open with Windows Photo Gallery.
    I am still going through all the file types and finding file extentions that are configured wrong within Windows Vista.
    UPDATE:  I had problems opening webpages from links from online searches that were within various forums and also on websites that required a login but popup a separate window to login to.  I don't know if you have the same problem with these sites.
    I uninstalled a Windows Update (kb927143) and can now access those.  I know this could be risky but I still have my firewall and antivirus running. Until IE7 is fixed its the only choice I have.
    To do this in Vista....go to Control Panel ... Programs and Features...then click view installed updates.  You will find it there if you have it installed.  From there you can uninstall it.
    Hope this helps you to solve your problem.
    Message Edited by nannahawktx on 08-27-2007 09:02 PM

  • ACE 4710 - Internet Explorer cannot display the webpage randomly

    We have a ACE 4710 with a basic config, (see below).
    When clicking on a tab from a window within Interent explorer we occasionally get an issue with it returning: "Internet Explorer cannot display the webpage" The details show "Access is denied" accessing a particular line of a javascript file.
    We have put one web server out of service in the farm to make sure that this isn't a result of stickyness not quite working.
    We have tested extensively by going directly to the web server directly without the load balancer and cannot reproduce the problem but we can produce the issue within a few minutes when going to the load balanced address.
    Thanks in advance for any advice.
    HOST-1/Admin# show run
    Generating configuration....
    logging enable
    logging fastpath
    logging standby
    logging timestamp
    logging trap 6
    logging history 6
    resource-class SLB_ResourceClass_T_R
      limit-resource all minimum 10.00 maximum unlimited
    resource-class sticky
      limit-resource all minimum 10.00 maximum unlimited
    boot system image:c4710ace-t1k9-mz.A5_1_2.bin
    peer hostname HOST-2
    hostname HOST-1
    interface gigabitEthernet 1/1
      switchport access vlan 1000
      no shutdown
    interface gigabitEthernet 1/2
      shutdown
    interface gigabitEthernet 1/3
      description LB003
      switchport access vlan 1
      shutdown
    interface gigabitEthernet 1/4
      description LB004
      switchport access vlan 2
      shutdown
    interface port-channel 1
      port-channel load-balance src-dst-port
      no shutdown
    clock timezone standard GMT
    switch-mode
    context Admin
      description SUTLB01
      member SLB_ResourceClass_T_R
    access-list ALL line 8 extended permit ip any any
    access-list ALL line 16 extended permit icmp any any
    access-list everyone line 8 extended permit ip any any
    access-list everyone line 16 extended permit icmp any any
    probe tcp probe_tcp_80
      port 80
    rserver host Server_S_W301
      description Server_S_W301
      ip address x.x.32.152
      inservice
    rserver host Server_S_W302
      description Server_S_W302
      ip address x.x.32.154
      inservice
    serverfarm host sfarm_T_R
      description sfarm_T_R
      predictor leastconns
      probe probe_tcp_80
      rserver Server_S_W301 80
      rserver Server_S_W302 80
        inservice
    sticky http-cookie Cookie1 T_R_sticky_cookie
      cookie insert browser-expire
      timeout 3600
      serverfarm sfarm_T_R
    class-map match-any T_R_L4Class
      2 match virtual-address x.x.33.150 tcp eq www
    class-map type management match-any remote_access
      2 match protocol xml-https any
      3 match protocol icmp any
      4 match protocol telnet any
      5 match protocol ssh any
      6 match protocol http any
      7 match protocol https any
      8 match protocol snmp any
    policy-map type management first-match remote_mgmt_allow_policy
      class remote_access
        permit
    policy-map type loadbalance first-match T_R_L7policy
      class class-default
        sticky-serverfarm T_R_sticky_cookie
    policy-map multi-match T_R_L4Policy
      class T_R_L4Class
        loadbalance vip inservice
        loadbalance policy T_R_L7policy
        loadbalance vip icmp-reply active
        nat dynamic 2 vlan 1000
    interface vlan 1000
      ip address x.x.33.148 255.255.254.0
      access-group input ALL
      nat-pool 2 x.x.33.151 x.x.33.151 netmask 255.255.254.0 pat
      service-policy input remote_mgmt_allow_policy
      service-policy input T_R_L4Policy
      no shutdown
    ip route 0.0.0.0 0.0.0.0 x.x.32.1
    ssh key rsa 1024 force

    +------------------------------------------+
    +-------------- HTTP statistics -----------+
    +------------------------------------------+
    LB parse result msgs sent : 421347     , TCP data msgs sent       : 2099597
    Inspect parse result msgs : 0          , SSL data msgs sent       : 0
                          sent
    TCP fin msgs sent         : 6169       , TCP rst msgs sent:       : 769
    Bounced fin msgs sent     : 5          , Bounced rst msgs sent:   : 1
    SSL fin msgs sent         : 0          , SSL rst msgs sent:       : 0
    Drain msgs sent           : 337811     , Particles read           : 5040829
    Reuse msgs sent           : 0          , HTTP requests            : 342499
    Reproxied requests        : 183422     , Headers removed          : 37475
    Headers inserted          : 342124     , HTTP redirects           : 0
    HTTP chunks               : 224859     , Pipelined requests       : 71466
    HTTP unproxy conns        : 267246     , Pipeline flushes         : 0
    Whitespace appends        : 0          , Second pass parsing      : 0
    Response entries recycled : 71302      , Analysis errors          : 0
    Header insert errors      : 22         , Max parselen errors      : 215
    Static parse errors       : 99         , Resource errors          : 0
    Invalid path errors       : 0          , Bad HTTP version errors  : 0
    Headers rewritten         : 0          , Header rewrite errors    : 0
    SSL headers inserted      : 0          , SSL header insert errors : 0
    SSL spoof headers deleted : 0         , Unproxy msgs sent         : 267246
    HTTP passthrough stat     : 0
    NOTE - We did turn on caching at one point to try and resolve the issue but it has since been turned off

  • ISQLPLUS : Internet Explorer cannot display the webpage

    Hi,
    on 10g R2 on Win 2003 server when I (being logged as sysman) click on iSQLPLUS link on DB control, and give agreement to display in http and not https I receive :
    Internet Explorer cannot display the webpageisqlplus Windows service is running and I have started iSQLPLUS :
    E:\oracle\product\10.2.0\db_1\BIN>isqlplusctl start
    iSQL*Plus 10.2.0.4.0
    Copyright (c) 2003, 2007, Oracle.  All Rights Reserved.
    Starting iSQL*Plus ...
    iSQL*Plus started.Any idea ?
    Thanks.

    Pl see if MOS Doc 300547.1 (Troubleshooting Guide for iSQL*Plus issues) can help
    HTH
    Srini

  • Periodic Internet Explorer cannot display the webpage

    while navigating in Apex users occasionally (and more frequently now) are getting "Internet Explorer cannot display the webpage" errors. if they click on refresh or back then click again it works.
    i cannot find any errors in any log files that give me any indication why this is happening.
    any help is appreciated.
    using
    Oracle Application Server 10g Release 2 (10.1.2)
    and
    Application Express 4.0.1.00.03
    with
    Oracle Database 10.2.0
    on
    Linux spedb01.spep.com 2.6.9-89.0.26.ELhugemem #1 SMP Sun May 30 09:43:09 EDT 2010 i686 i686 i386 GNU/Linux
    Edited by: user12021582 on Dec 20, 2010 3:42 PM

    Have not heard of this one. Would consider setting IE "Delete browser history on exit" if you have not already. And setting "Check for newer versions of stored pages" to every time I visit the webpage.

  • ACE 4710 - Internet Explorer cannot display the webpage

    Hi,
    We have implemented HTTPS redirection and SSL termination in ACE for one server-farm. The webpage is not getting displayed in internet explorer and even the redirection is not taking place. Whereas, with Firefox and chrome browsers, the website displays properly. Please suggest a solution to this issue.
    The ACE configuration is as below.
    crypto chaingroup STAR_GRP_CHAINGRP
      cert star_exe_edu_sa.crt
      cert star_TrustedRoot.crt
      cert DigiCertCA.crt
    probe tcp PROBE_8000
      port 8000
      interval 5
      passdetect interval 10
      open 10
    rserver host PMCRAGRPWEB01_172.18.13.48
      description SBM PMCRAGRPWEB01_172.18.13.48
      ip address 172.18.13.48
      conn-limit max 4000000 min 4000000
      inservice
    rserver host PMCRBGRPWEB01_172.18.13.49
      description SBM PMCRBGRPWEB01_172.18.13.49
      ip address 172.18.13.49
      conn-limit max 4000000 min 4000000
      inservice
    rserver redirect REDIRECT-GRPTEST
      webhost-redirection https://%h%p 302
      inservice
    serverfarm host SF_GRP_TEST_SERVER
      description GRP test sererfarm for irecruitment
      probe ICMP_PROBE
      probe PROBE_8000
      rserver PMCRAGRPWEB01_172.18.13.48 8000
        conn-limit max 4000000 min 4000000
        inservice
      rserver PMCRBGRPWEB01_172.18.13.49 8000
        conn-limit max 4000000 min 4000000
        inservice
    serverfarm redirect SRV-REDIRECT-GRPTEST
      rserver REDIRECT-GRPTEST
        inservice
    parameter-map type ssl Star_GRP_PARAMMAP
    sticky ip-netmask 255.255.255.255 address source GRPTEST_sticky
      serverfarm SF_GRP_TEST_SERVER
      timeout 120
      replicate sticky
    sticky ip-netmask 255.255.255.255 address source REDIRECT-GRPTEST-STICKY
      serverfarm SRV-REDIRECT-GRPTEST
      timeout 120
      replicate sticky
    ssl-proxy service STARGRP_SERVER
      key star.exe.edu.sa.key
      cert star_exe_edu_sa.crt
      chaingroup STAR_GRP_CHAINGRP
      ssl advanced-options Star_GRP_PARAMMAP
    class-map type http loadbalance match-any MATCH-WEBSITEURL-GRPTEST
      4 match http header Host header-value ".*grp.exe.edu.sa.*"
    class-map match-any VIP_GRP_TEST_SERVER
      5 match virtual-address 172.18.13.58 tcp eq https
      6 match virtual-address 172.18.13.58 tcp eq 8000
    class-map match-any class-REDIRECT-GRPTEST-HTTPS
      5 match virtual-address 172.18.13.58 tcp eq www
    policy-map type loadbalance first-match VIP_GRP_TEST_SERVER-SLB
      class class-default
        sticky-serverfarm GRPTEST_sticky
    policy-map type loadbalance first-match VIP_REDIRECT_GRPTEST-SLB-HTTPS
      class MATCH-WEBSITEURL-GRPTEST
        sticky-serverfarm REDIRECT-GRPTEST-STICKY
    policy-map multi-match INT228-228
     class class-REDIRECT-GRPTEST-HTTPS
        loadbalance vip inservice
        loadbalance policy VIP_REDIRECT_GRPTEST-SLB-HTTPS
        loadbalance vip icmp-reply
        nat dynamic 1 vlan 228
      class VIP_GRP_TEST_SERVER
        loadbalance vip inservice
        loadbalance policy VIP_GRP_TEST_SERVER-SLB
        loadbalance vip icmp-reply
        nat dynamic 1 vlan 228
        ssl-proxy server STARGRP_SERVER
    interface vlan 228
     service-policy input INT228-228
    Regards,
    Madhan kumar G

    Hi Madhan,
    If it is working with Mozilla and Chrome, the configuration seems to be fine. Which version on IE are you facing issues with? Have you tried different versions of IE?
    Can you take a quick client capture and see where the connection fails and why?
    Regards,
    Kanwal
    Note: Please mark answers if they are helpful.

  • "Internet Explorer Cannot Display the web Page

    on August 7th
    I purchased a brand new computer that has
    Vista Home premium on it,
    To date I have not been unable to open this program.
    I have been looking for help ever since,
    I have been all over the net, I have tried
    Lenovo sites.
    I tried to call Lenovo, unfortunately I got no help there,
    as I am deaf.
    I looked through this site, in the hope that someone
    who might have experienced this can help.
    The Welcome center comes up when I start the Computer.
    when I click on Internet explorer this is what I get.
    Internet Explorer Cannot Display the web Page"
    Most likely Causes:
    *You are not connected to the Internet.
    * The web site is encountering problems.
    * There might be a typing error in the address.
    "What can you try"
    'Diagnose Connection Problems"
    I did this and this is what I got.
    Windows did not find any problems with this
    Computer's network connection.
    I tried more suggestions, and got more of the same.
    I tried everything that looks promising, to no avail;
    Please help if you can, it would be much appreciated;
    Regards
    Victoria
    Lenovo 3000 H210 53552p desktop
    Vista home Priemium 64

    Victoria,
       There are a few reasons that the error may come up. The first thing that I need to ask is when you say "I have been all over the net, I have tried Lenovo sites.', is this on the new computer? (i.e.. You are able to browse the internet, but get the error every time you initially launch Internet Explorer)
      If so, the likely issue is that the particular web site that your home page is set too is invalid or is encountering problems.
    Dennis

  • I imported all my favorites from Internet Explorer, but in the Firefox window I don't see a favorites tab. I've got a bunch of favorites that I don't want to have to redo. Any advice?

    Question
    I imported all my favorites from Internet Explorer, but in the Firefox window I don't see a favorites tab. I've got a bunch of favorites that I don't want to have to redo. Any advice?

    You can usually find the imported IE Favorites in a folder ("From Internet Explorer") at the bottom of the Bookmarks Menu folder (Bookmarks > Show All Bookmarks).
    If you have problems with importing the IE Favorites in Firefox then export the Favorites in IE to an HTML file and import that file in the Firefox Bookmarks Manager.<br />
    That way you also preserve any sorting that you may have done in IE with the Favorites.
    * Export the favorites in IE to an HTML file (bookmarks.html): File > Import and Export
    * Import the HTML file in Firefox: Bookmarks > Show All Bookmarks > Import & Backup > Import HTML: From File
    See also:
    * http://kb.mozillazine.org/Import_bookmarks ("Import from another browser" and "Import from file")

Maybe you are looking for

  • Rendering problem

    I'm experiencing something similar, though it's with all multi-processing. I've tried exporting with both Quicktime (ProRes, Animation, etc) and with image sequences. No dice either way. I get an error dialog: Rendering Error: An Output module failed

  • GL ACCOUNT BLOCKED

    Hi gurus,         When i give the posting the GRN ,The following error appear G/L ACCOUNT BLOCKED FOR POSTING IN COMPANY CODE. Pls help me Regards, T.Murugu

  • Can I create a keyboard command for the Ken Burns effect?

    Friends, I am creating a short video that consists of about 40 stills and a few video clips.  For each of the stills I want to create a Ken Burns effect.  I know that there is a keyboard command to open the crop tool.  Can I create a keyboard command

  • Cannot save Adobe PDF Settings File error

    I'm using Acrobat X Pro with Windows 8. I've downloaded a .joboptions file to add to Distiller. I select Settings > Add Adobe PDF settings, browse to the file's location, select the file, and click Open. Distiller says, "Cannot save Adobe PDF Setting

  • 10gr2 and 11gr2

    Hi, I can to install both the version of Oracle DB 10GR2 and 11GR2 ? Thank You Gaetano