Win Server 2008 R2 - FSRM is not able to view Office Word 2010 custom document properties

Hi, 
how to view custom document properties for office 2010 files on Win Server 2008 R2 - FSRM.
Word 2003 custom document properties are reportable and also visible after: Right click on file/Properties/Custom
Word 2010 there is no Custom menu after: Right click on file/Properties/Custom
Any suggestion ?
TH

Hi Tomas,
To view custom properties in Office 2010:
1. Click the File tab.
2. Click Info.
3. Click Properties, and then select Advanced Properties
4. Click the Custom tab
Regarding this point, the following article can be referred to for more information.
View or change the properties for an Office file
http://office.microsoft.com/en-in/word-help/view-or-change-the-properties-for-an-office-file-HA010354245.aspx
In addition, for this is more related to Office, in order to get better, we can also ask for suggestions in the following forum.
Office Forum
http://social.technet.microsoft.com/Forums/office/en-US/home
Best regards,
Frank Shen

Similar Messages

  • Services are running in Server 2008. But still not able to telnet on localhost

    Hello Everybody,
    Desired services are running on server but still telnet on localhost not happening.
    From remote server I am able to telnet on same services.
    I am facing issue while doing telnet to remote server alos.
    Is there anything which could stopping telnet operation.
    From same server I am not able to telnet to other server for SQL services, whereas both servers in same LAN with adjacent IP address. 

    Hi Steven,
    Thanks for response.
    I have checked same. Services are listening on desired port.
    From events log we observed that server moving out of domain controller which root cause not identified yet.
    Will it be possible if sever moving out of domain and getting NETLOGON issue. Which could block communication to other server or localhost telnet.
    Regards,
    Mahesh D. 

  • Error message " Adobe viewer is not able to view the content of this document" when I try to upload it

    Hi
    I am trying to upload a pdf document but each time I have the following error message:
    I tried many tricks like changing the acrobat plugin and using the default PDF viewer instead, I uninstalled and reinstalled all the Firefox plugins, I tried to upload it from IE... but none of these succeeded. I have the latest version of acrobat reader and the pdf document id secured by a password and was generated using Adobe LifeCycle designer ES 10.0. How can I solve this issue? Thanks in advance

    Thank you for your replies. I want to upload  the document to a website. I have already made the changes described in the link above (I chose to open pdf files and forms using the Adobe Reader instead of the native Firefox plugin) but it didn't solve the problem. Could be the problem with the LifeCycle designer?

  • Acrobat XI hyperlink does not work when printing Office Word 2010 to PDF

    Hello,
    I have word documents where I have added http hyperlinks.  The links function fine in the Word doc.  When I print the document to an Adobe PDF using Acrobat XI the resulting PDF file has the blue text which indicates it is a hyperlink but there is no link whe I hover over the text.  How do print Office 2010 documents to Adobe PDF and preserve the hyperlinks?

    The trick is not to print it but to use the PDF Maker plugin, if it's
    available, to convert the file to a PDF while maintaining links and other
    meta-objects (bookmarks, destinations, etc.).
    On Tue, Mar 31, 2015 at 8:11 PM, davids86393363 <[email protected]>

  • Pleae help me: I want to install oracle developer on win server 2008

    please help me i am try to install oracle developer 10g on win server 2008 but failed because the version of operating system not 5 or 5.1 or 5.2 and it is 6
    so i want to install oracle developer 11g on win server 2008 but i am not found oracle developer 11g to download it
    please any one help me to solve this problem or help me to find oracle developer 11g
    Thank you

    Oracle Developler 11g is now called Oracle Fusion Middleware (FMw) 11g and can be downloaded from the Oracle Fusion Middleware Downloads page. You have to download and install WebLogic Server (WLS) 10.3.3 first, then scroll down and download and install Portal, Forms, Reports and Discoverer (11.1.1.3.0).
    When you install WLS, make sure you do not run the configuration step. When you install FMw, it will configure the WLS as part of it's configuration step.
    Hope this helps,
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

  • How to Reactivate RDS TS in Win Server 2008 R2

    Good Day,
    I had installed Citrix XenApp on Windows Server 2008 R2 Stnd. I formatted the Server with fresh Win server 2008 R2 Stnd: and activate it with existing licences.
    1: I have installed XenpApp and activate it. 
    2: When i tried to activate CALS with License IDs then i got message   "It is already Activated" problem is that i did not deactivate first when i was going to format. i should had to deactivate but forgot.
    Is there any way to reactivate the CALs or deactivate and active ????
    Regards,
    I.A.H

    Hi,
    Please contact the Clearinghouse, explain to them that you forgot to Deactivate the old server before wiping it and are now having a problem re-installing your CALs on your new server, and they will assist you.  Please have your authorization number,
    license number, agreement number, original paperwork, emails, etc., ready when you call.
    Locate the Microsoft Clearinghouse Telephone Number for Your Country or Region
    http://technet.microsoft.com/en-us/library/cc754874.aspx
    Thanks.
    -TP

  • Disable set as background from right click in internet explorer 8,9,10,11 by GPO in Win Serv 2008 R2

    Hi.
    How to disable ''set as background'' from right click in internet explorer 8,9,10,11 by GPO in Win Serv 2008 R2.
    People in my domain can set their background by right click in the pics on their IE, I enabled by GPO a wallpaper by default in ''Administrative Templates > Desktop > Desktop > Desktop Wallpaper''  and I enable too the  ''Administrative Templates
    > Control Panel > Personalization > Prevent changing desktop background'' at login people have the corporative Desktop but they can change by IE. What can I do? thanks.
    <u5:p></u5:p>

    Hi,
    I test this issue, actually, in IE 11, the option "set as backgroud" is grayed out after I applied policy  Administrative Templates > Control Panel > Personalization > Prevent changing desktop background, but seems not suitable for
    other versions of IE.
    You can try other solutions listed in the similiar thread
    How to disable the "Set as Desktop background"?<o:p></o:p>
    http://social.technet.microsoft.com/Forums/en-US/889447df-8452-44b4-bcdf-bf217b75ce6f/how-to-disable-the-set-as-desktop-background?forum=windowssteadystate
    Regards<o:p></o:p>
    Yolanda
    TechNet Community Support

  • ORA-12560 on win server 2008 R2

    I have an oracle DB 11.2 running on win server 2008..
    I can connect to a DB, but when I need to make some changes locally, it's not possible.
    so:
    - the DB and listener are running as a local system account
    - I'm loggin into as a local admin (Administrator/pwd)..
    - ORACLE_SID has been set in Control Panel --> system (for all users)
    - tnsping locally is running OK
    - lsnrctl status LISTENER returns no error
    - sqlnet.ora has been set:
    SQLNET.AUTHENTICATION_SERVICES= (NTS)
    NAMES.DIRECTORY_PATH= (TNSNAMES)
    - there are no remote_listeners
    pls, help :)

    846417 wrote:
    C:\Users\Administrator>sqlplus / as sysdba
    SQL*Plus: Release 11.2.0.1.0 Production on Fri Apr 8 16:21:49 2011
    Copyright (c) 1982, 2010, Oracle. All rights reserved.
    ERROR:
    ORA-12560: TNS:protocol adapter errorLet's stick to the 12560.
    Is the OracleService<sid> windows service started?
    If started, make sure ORACLE_SID (that sqlplus looks up via its registry settings, if not overridden by env) is correct:
    C:\Users\Test>set ora
    Environment variable ora not defined
    C:\Users\Test>set oracle_sid=xe1
    C:\Users\Test>sqlplus / as sysdba
    SQL*Plus: Release 11.2.0.2.0 Beta on Fr Apr 8 13:09:52 2011
    Copyright (c) 1982, 2010, Oracle.  All rights reserved.
    ERROR:
    ORA-12560: TNS:protocol adapter error
    Enter user-name:
    C:\Users\Test>set oracle_sid=xe
    C:\Users\Test>sqlplus / as sysdba
    SQL*Plus: Release 11.2.0.2.0 Beta on Fr Apr 8 13:10:01 2011
    Copyright (c) 1982, 2010, Oracle.  All rights reserved.
    Connected to:
    Oracle Database 11g Express Edition Release 11.2.0.2.0 - BetaEdited by: orafad on Apr 8, 2011 1:11 PM
    Edited by: orafad on Apr 8, 2011 5:27 PM

  • Bootcamp Win Server 2008 x64 - No network

    I have no networking either wired or wireless with Bootcamp and Windows Server 2008 x64.
    I've repaired the drivers from the bootcamp partition on the OSX disk - no change, and uninstalled the device drivers for the ethernet controllers and the Broadcom Wireless 802.11n device in Device Manager, rebooted, windows wasn't able to install the drivers.
    Does anyone know where I can download the x64 drivers, for the Broadcom Wireless 802.11n
    Both the wired and wireless work Ok under OSX with all updates installed.
    Any help would be greatly appreciated.
    Thanks
    Syl
    MacPro 2 x 2.93GHz Quad-Core Intel Xeon
    AirPort Extreme Wi-Fi Card-INT

    I had the same problem but I came up with a solution. Since I was following some instructions on using Win server 2008 as a workstation I saw that it mentioned downloading Everest Ultimate Edition (trial version worked) to find out what the hard ware was that needed a driver. When I did this I saw that the network device was listed as a Intel 82574L. After finding the name of the hardware I went to "computer management" and clicked on "device manager." From there I double clicked on the network device, clicked on the reinstall driver; from there browse for driver software & let me pick from a list. Select network adapters - intel - and then on the Intel 82574L. Once it installed the network came right up. Hope that helps you out & good luck!

  • Problem Installing EM Cloud control 12c in Win Server 2008

    Hi All,
    I having problem installing the EM in win server 2008 64bits. I already installed java run time but when i click on the setup.exe in the disk 1 after unzip it does not show the installation wizard and any error message. Did i miss out something? do i need to create the user group and user as stated in the installation guide as stated in this link Installing Enterprise Manager System - 12c Release 1 (12.1.0.1)?

    Hi, can you open an SR for this issue and share the number. Lets check few basic things:
    a) can you make sure that all the zips are downloaded from OTN have correct byte and checksum information
    b) Can you make sure that you unzipped all these zips files in a single folder ?
    c) After unzipping can you check if you have following folders created ( not these folder are for linux but they will be same on windows) -
    install      libskgxn      plugins     response     stage     WT.zip
    jdk     oms     runInstaller      wls
    d) Can you invoke setup.exe -debug
    then look at the logs from -
    C:\Users\aime\AppData\LocalTemp\2\OraInstall2013-07-09_04-10-59AM   ( for windows it will be orInstaller.err and log )
    You donot need any user group or any thing created.

  • IR6 and Win Server 2008

    Could someone confirm if Win 2008 Server is supported with the IR6 release? I was on a webinar yesterday about ZESM and I asked the same question and was told that Win 2008 Server was supported. However, I cannot see any such reference when lookiing on Novell's site about ZESM.
    Thank you in advance for any replies.
    Scott

    Daniel:
    Thank you for the info.
    Scott
    >>> Daniel Spinatto<[email protected]> 4/28/2009 9:20 AM >>>
    Hey there.
    At this time, Win2K8 is not a supported platform in IR6. Also, Win2K/SQL2K support were removed from IR6.
    Sorry for the delay.
    Daniel
    >>>
    From: Scott Leonard<[email protected]>
    To:novell.support.zenworks.endpoint-security-management
    Date: 4/17/2009 10:22 AM
    Subject: Re: IR6 and Win Server 2008
    Daniel:
    Thank you for checking into this.
    Scott
    >>> Daniel Spinatto<[email protected]> 4/16/2009 9:23 AM >>>
    While I had not tried to install IR6 on Win2K8, I remember some conversations about support being dropped for SQL2K, and Win2K8 being added in IR6.
    However, the website and documentation seem to not reflect those changes.
    The Readme for IR6 still mentions that Win2K8 is not supported:
    http://www.novell.com/documentation/...5.html#bcxgf96
    I will try to confirm that internally and give back and answer.
    >>>
    From: Scott Leonard<[email protected]>
    To:novell.support.zenworks.endpoint-security-management
    Date: 4/16/2009 10:43 AM
    Subject: IR6 and Win Server 2008
    Could someone confirm if Win 2008 Server is supported with the IR6 release? I was on a webinar yesterday about ZESM and I asked the same question and was told that Win 2008 Server was supported. However, I cannot see any such reference when lookiing on Novell's site about ZESM.
    Thank you in advance for any replies.
    Scott

  • CR2008 on Win Server 2008 - some fonts duplicate letters!

    Hi,
    We recently moved a .NET web app (VS 2008) using CR 2008 from a Win Server 2003 machine to Win Server 2008.  We installed the CR2008 SP2 runtime.  To get our app working, we had to make the IIS App pool run in 32 bit (WOW) mode since there is no 64 bit runtime for CR2008 (I trust there is going to be one in CR2010???!!).  Our app outputs reports as pdf files which it saves on the server for users to download.
    The reports are being produced, but certain letters in certain fonts are being doubled up, or have other letters inserted after them.  For example, our reports use Palatino Linetype in text boxes and in this font every letter 't' is duplicated!!  Another font I tried (can't remember which) inserted an 'h' after every 't'.  The only font I could find which worked ok was Arial, which is not ideal.  Has anyone seen this, or have any idea what's going on?
    Michael

    Hi, Michael;
    Try using a different printer driver on that system.
    Also, if you run the report in the Crystal Reports Designer, and export it to PDF, do you get the same results?
    Regards,
    Jonathan

  • ACS 4.2 Remote agent with WIN server 2008 core Enterprise 64-bit

    I need help to clarify if Cisco ACS 4.2 does support remote agent on Win server 2008 core enterprise 64-bit?? if not supported; is there any work-around solution for this?

    Hi,
    As per the release notes it does support.
    Windows 64-bit Support for Remote Agent:-
    ACS 4.2.1 Remote Agent is supported on the following Windows 64-bit OS:
    •Windows Server 2008, Standard Edition with Service Pack 2
    •Windows Server 2008, Enterprise Edition with Service Pack 2
    •Windows Server 2003, R2, Standard Edition with Service Pack 2
    •Windows Server 2003, R2, Enterprise Edition with Service Pack 2
    http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2.1/Release_Notes/acs421_rn.html#wp1050574
    thanks,
    Vinay

  • HP T410 AIO and Win Server 2008 R2 Standard

    Hi
    I am trying to connect some HP t410 AIO thin client to a Win Server 2008 R2 Standad  edition server. I added the  Remote Desktop Services and Web SErver(IIS) as roles on the server. The goal is to be able to connect to the Server using the Web
    Brower connection type available on the HP t410 AIO thin client I understand that to connect more that two clients to the server  you need to obtain RDS CALs, We contacted a MS parter to purchase the CALs and received a ling to download the CALs, but
    none of the items in the link seem to be what I think we need. The page has about 17 items MS application Virtualixation for RDS, MS Appication Virtualization  Hosting for Desktpos and one entry for Win Remote Desktop Srvcs CAL 4.5 wSP1. Questio :
    What is the correct name of the CALs that I need to install on the server?
    How do I configure the server to accect the Web Browser type connection from the thin client?
    Currently I can connect to the server using a RDP 7 connection and logging in as Administrator. When I try to log in with a user created under AD,  I get a response complaining that " to log on to this remote computer, you must be granted the Allow
    log on through Terminal Services right." Where do I configure that? Thanks

    Hi,
    You can refer to the following guides to setup RDSH and RDWA.
    Installing Remote Desktop Session Host Step-by-Step Guide
    http://technet.microsoft.com/en-us/library/dd883275(v=ws.10).aspx
    Deploying Remote Desktop Web Access with Remote Desktop Connection Broker Step-by-Step Guide
    http://technet.microsoft.com/en-us/library/dd883258(v=ws.10).aspx
    Regarding how to install RDS CALs, you can refer to:
    Step 3: Installing Remote Desktop Services Client Access Licenses (RDS CALs) on the Remote Desktop License Server
    http://technet.microsoft.com/en-us/library/dd996633(v=ws.10).aspx
    Hope this helps.
    Jeremy Wu
    TechNet Community Support

  • Can I move a Virtual Domain Controller from one host(Win Server 2008 R2) to another (Win Server 2012 R2) ? Are there any issues?

    Can I move a Virtual Domain Controller from one host(Win Server 2008 R2) to another (Win Server 2012 R2) ? Are there any issues?

    I also had this error: "Setup cannot continue. Your computer will now restart, and your previous version of Windows will be restored."
    trying to do a in-place upgrade of a Domain Controller Windows 2008 R2 to Windows 2012 R2.
    The problem was the separated System Reserved Partition. After I removed using this instructions:
    http://jacobackerman.blogspot.com/2012/12/how-to-remove-system-reserved-partition.html
    The upgrade ran ok, and now have my DC as Windows 2012 R2.
    Hope that helps!.

Maybe you are looking for