Win server 2012

windows 2012 server 64 bit auto stop print spooler
help me...........

Hi sbanurada,
Please check the application event log .
Here is a similar thread :
http://social.technet.microsoft.com/Forums/windowsserver/en-US/0ef61405-10a1-4e8b-83ed-33ca3c318d57/windows-server-2012-print-spooler-stops-after-logging-off?forum=winserverprint
Also you may try to download the newest driver from print official site and re-install .
Hope it helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Can I move a Virtual Domain Controller from one host(Win Server 2008 R2) to another (Win Server 2012 R2) ? Are there any issues?

Can I move a Virtual Domain Controller from one host(Win Server 2008 R2) to another (Win Server 2012 R2) ? Are there any issues?

I also had this error: "Setup cannot continue. Your computer will now restart, and your previous version of Windows will be restored."
trying to do a in-place upgrade of a Domain Controller Windows 2008 R2 to Windows 2012 R2.
The problem was the separated System Reserved Partition. After I removed using this instructions:
http://jacobackerman.blogspot.com/2012/12/how-to-remove-system-reserved-partition.html
The upgrade ran ok, and now have my DC as Windows 2012 R2.
Hope that helps!.

How do I install Firefox on Win Server 2012 Remote Desktop?

I have tried several ways to download and install Firefox on my Win server 2012 Remote Destop. The software installs, but the installation loops and continuously opens new tabs for
res://iesetup.dll/SoftAdmin.htm
Are there special instructions to install Firefox in this environment?

The url in ie gave me this page [see attached] and I did find a question similar in mozillazine [http://forums.mozillazine.org/viewtopic.php?f=7&t=173325&start=0&st=0&sk=t&sd=a]
But there is also an extended support release for enterprise environments that you can check out: [https://www.mozilla.org/en-US/firefox/organizations/]

How can I create a Pooled VDI infraestructure using Win server 2012 as VM image?

Hello
I have followed the "usual" way to build a pooled VDI desktop using Win7 or Win8 with success, but it fails when I use an image of Win Server 2012 as VM instead.
Am I overlooking something? Should I need to prepare the image in a different way? (Sysprep differently?)
Thanks

Dear Ryan
I think the point is other than committing a breach of licensing. I have a legitimate need to use a pooled server system, which incidentally is not going to be end user.
The "economy" of the proposed structure can make a more efficient use of the equipment.
This is an excerpt of the MS VDI Q&A:
Do I need to pay for Windows VDA if I use Windows Server as a client operating system in my virtual machine?
OR
I’ve heard that I can avoid paying for Windows VDA by using Windows Server as my VDI desktop OS. Is this true?
Running a Windows Server®
OS as the desktop in the datacenter does not require Windows VDA, but there are many reasons why a server OS should not be used as a desktop, especially in the datacenter:
The user experience with servers as the desktop is very different from using a Windows client.
Many applications for end users were written for a client OS and not a server OS. Each of your applications would need to be retested to ensure compatibility with a server OS. Additionally, most vendors
do not offer support for client applications running on servers.
Clients and servers are on different patch cycles, adding to management complexity.
Most of the VDI ecosystem will support the Windows client in the datacenter, not server OS’s.
However, if you do decide to run a server OS as the desktop, please note that you will need to pay a Remote Desktop Services Client Access License (RDS-CAL) to correctly license that scenario.

How to create a Pooled VDI infrastructure using Win server 2012 as VM image?I have followed the "usual" way to build a pooled VDI desktop using Win7 or Win8 with success, but it fails when I use an image of Win Server 2012 as VM

I have followed the "usual" way to build a pooled VDI desktop using Win7 or Win8 with success, but it fails when I use an image of Win Server 2012 as VM instead.
Am I overlooking something? Should I need to prepare the image in a different way? (Sysprep differently?)
Thanks

Hi,
Thank you for your posting in Windows Server Forum.
Can you specify the error which you are facing during VDI setup for server 2012?
I might think that you need to check the memory setting for server 2012, as might happens that due to less memory you can’t setup the VDI setup properly.
Memory: If the Master VM is configured with static memory, it must have at least 1024 MB as startup RAM. If the Master VM is configured with dynamic memory, the maximum RAM must be at least 1024 MB.
Please check beneath article for information.
Windows
Server 2012 2,500-user pooled VDI deployment guide (Doc)
Single Image Management for Virtual Desktop Collections in Windows Server 2012
Hope it helps!
Thanks.
Dharmesh Solanki

SYSTEM WRITER MISSING WIN SERVER 2012

Hi,
I have installed win server 2012. On that server i have sql 2012 and sharepoint 2013. After a while my windows server backup stops working and system writer is missing now. I found that problem might be in subfolders in MICROSOFT.NET folder. It has more
than 1000 subfolders in GAC_MSIL folder. Is this really true that system writer can't enumerate more than 1000 folders and that I cant have sharepoint 2013 and sql server 2012 installed on same server. Is there a solution which can fix this or I can have all
of that on one server?
Hope that someone can help with this.

It seems to be a known issue, some other Technet forum users have experienced the same problem.
Check this post and see the solution.
Missing VSS System Writer and CAPI2 error in Event Log
http://social.technet.microsoft.com/Forums/en-US/winserverfiles/thread/4458947a-623e-45c1-b8e4-868aad1e93b0
I've got this problem about a month ago. I refer to MSP.
The problem was caused due to stack full. When we list system writer using “vssadmin list writers”, it will go through all the system files. To do that, the OS use a search algorithm with a stack which has a size limitation of 1000. When the stack
was full, it failed to continue listing files and log an event in the application event log.
In my case, the following folder contains too many subdirectory and caused the problem.
C:\Windows\Microsoft.Net\Framework64\v2.0.50727\Temporary ASP.NET Files\*
1. Open C:\WINDOWS\Microsoft.NET\Framework64\v2.0.50727\CONFIG\Web.config
2. Add tempDirectory attribute to compilation tag. For example:
< compilation tempDirectory="c:\ASPTEMP">
And also grant the folder with the same privilege with as “C:\Windows\Microsoft.Net\Framework64\v2.0.50727\Temporary ASP.NET Files”.
3. Restart the IIS Service.
4. Backup and delete all files under “C:\Windows\Microsoft.Net\Framework64\v2.0.50727\Temporary ASP.NET Files”.
5. restart the Cryptographic Service.
6. Try “vssadmin list writers” again.
Hopes this brings idea for you to solve it.
And also refer to this thread:
Howto Restore VSS Functionality on Windows 2012 Server with SQL 2012 and Sharepoint 2013 installed?
http://social.technet.microsoft.com/Forums/fr-FR/winserver8gen/thread/f440e66c-437d-4576-af51-b7cfecdf2906

Win Server 2012 Failover Cluster - Error: Failed to bring cluster disk online

Hi Technet
I'm currently running running 2 VMs Win Server 2012 and would like to test Failover Clustering for one of our FTP server
I've added on both servers an additional partition, formatted and Online
One of the drives comes Online but cannot bring the 2nd disk online from the cluster manager
Error: failed to bring resource online - clustered storage is not connected to the node
Assistance would be greatly appreciated
Thank you
Jabu

Hi jsibeko,
Since the VMware offer the MSCS shared storage solution themselves, I suggest you first ask VMware whether that shared storage is supported with your vSphere edition, I found
some VMware KB about the VMware shared storage for MSCS, may you can get more tips.
The VMware KB:
Microsoft Clustering on VMware vSphere: Guidelines for supported configurations (1037959)
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1037959
Microsoft Cluster Service (MSCS) support on ESXi/ESX (1004617)
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004617
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Win Server 2012 Failover Cluster - Error when adding disk onto a cluster (The error code was '0x1' ('Incorrect function.').)

Hi Techies
I'm currently running running 2 VMs Win Server 2012 and would like to test Failover Clustering for one of our FTP server
I've added on both servers an additional partition, formatted and Online, but cannot bring the disk online from the cluster manager
Assistance would be greatly appreciated
Thank you
Jabu

You posted this in the Exchange Forum, your best bet for an answer would be to post this in the Windows Server Forum.
https://social.technet.microsoft.com/Forums/en-US/home?forum=winserverClustering
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

Replicate win server 2008 r2 with win server 2012 r2

I have AD on win server 2008 R2
Can I replicate it with win server 2012 R2
Nagy Anwar

Hello,
there is no problem to add a new Windows Server 2012 R2 into the existing domain.
http://blogs.msmvps.com/mweber/2012/07/27/upgrading-an-active-directory-domain-from-windows-server-2008-or-windows-server-2008-r2-to-windows-server-2012/
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

How to Migrate Win Server 2008 to Win Server 2012 if PDC server no longer exist?

With this being Foundation (less than 15 users) with some problems already, it might be smarter to just start the new server fresh.

I took over a small business company's network infratructure with Server 2008 Foundation and I would like to migrate to a new Windows Server 2012 r2.The Server 2008 Foundation is a DC with AD / DHCP / DNS / File & Print Server roles. I would like to transfer these roles to the new server with Win Server 2012 r2 std OS. My plan is to join the new server to the old DC, promote it as DC, and transfer roles to it, demote old server and power off.However, there was an older server (Windows 2003) which is no longer in the office and it was the current operations master. The server 2003 was the PDC. When I open AD Domains and Trusts I get this error:"You cannot modify domain or trust info because a PDC emulator cannot be contacted.."Maybe the FSMO roles wasn't transferred over from 2003 to 2008 properly? I don't know.How can I move forward to...
This topic first appeared in the Spiceworks Community

Can i upgrade Win Server 2012 Standard to Win Serevr 2012 R2

1. Can i upgrade Win Server 2012 Standard to Win Server 2012 R2 ?
2. Is it free of Cost, or do i need to pay ??
3. can i upgrade without affecting working environment ?
----Tanu---

1. Yes
2. No it's not free you have to buy the upgrade, unless you are already paying for Software Assurance.
3. Maybe. It depends upon the current implementation you have.
https://technet.microsoft.com/en-au/library/dn303416.aspx
https://technet.microsoft.com/en-us/windowsserver/dn527667.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

How to create a Pooled VDI infrastructure using Win server 2012 as VM image?

I have followed the "usual" way to build a pooled VDI desktop using Win7 or Win8 with success, but it fails when I use an image of Win Server 2012 as VM instead.
Am I overlooking something? Should I need to prepare the image in a different way? (Sysprep differently?)
Thanks

Hi,
Thank you for your posting in Windows Server Forum.
Can you specify the error which you are facing during VDI setup for server 2012?
I might think that you need to check the memory setting for server 2012, as might happens that due to less memory you can’t setup the VDI setup properly.
Memory: If the Master VM is configured with static memory, it must have at least 1024 MB as startup RAM. If the Master VM is configured with dynamic memory, the maximum RAM must be at least 1024 MB.
Please check beneath article for information.
Windows
Server 2012 2,500-user pooled VDI deployment guide (Doc)
Single Image Management for Virtual Desktop Collections in Windows Server 2012
Hope it helps!
Thanks.
Dharmesh Solanki

Vpn connection from administration win server 2012 r2

hello every one i have win server 2012 for the connection vpn i need make setting as like subnetwork get access to the from main office to the district office?

Hi,
Can you ping normally to other server from your server 2012 R2?
Does user has enough permission for remoting?
Can you telnet port 3389 and see whether RDP port is opened?
Please try to perform remote desktop with “mstsc /admin” switch and check the result. Addition try to perform the remote session with IP address specified for that server. Also you can try PowerShell command to enable remote desktop.
set-ItemProperty -Path 'HKLM:\System\CurrentControlSet\Control\Terminal Server'-name "fDenyTSConnections" -Value 0
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to uninstall win server 2012 R2 (OS) from computer altogether?

Hi guys, I am trying to remove/ format my hdd that holds my OS which is currently Windows Server 2012 R2. I am having a tough time at it. Are there any suggestions?

Hi, we have a Win server 2012 R2 (Standard edition, running on a HP Proliant ML350 Gen9), running Active Directory. This machine is also a fileserver. Our files are mostly Word and Excel. We are a carpenter company and many of our carpenters work on customer sites. They often have slow internett connections (mobile broadband). They need to access and update the files on our server. So my question is - what would be the best way to set this up? The connection should of course be secure. It should also be easy to use.
My thoughts so far is: DirectAccess? The VPN on our ZyWall 110 firewall/router? WebDAV?
This topic first appeared in the Spiceworks Community

How to change computer name in win server 2012 R2???

I am using Windows Server 2012 R2 Standard.
I cannot change my computer name, which can been from Control Panel -> System -> Computer Name
Could you please help me with this?
I tried command below but it doesn't work
netdom computername XXXX.ZZZ /add:YYYY.ZZZ
This doesn't work. Message says -> Cannot add YYYY.ZZZ as another name (in Korean Language)
That resource is used now. (in Korean Language)
Please help me, because this is so important to me
Thank you in advance

Hi,
What role does this server paly in your envrinment?
I have not find related information/explain, but according to the error message, it seem language/location related.
Could you please provide more information: OS version, screenshot of the commend line and error message.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

EHP2 - EHP7 Upgrade Path using SQL Server 2012/Win Server 2012 R2

Hi Guys.
I have question regarging Upgrade Roadmap for a ERP 6 EHP2 system based on NW 7.01 which I would like to Upgrade to ERP6 EHP7 SP7
Source System is
Windows 2012
SQL Server 2008 R2
EHP2 for ERP 6.0 SPS Level 14
Target System
Windows 2012
SQL Server 2012
EHP7 for ERP 6.0 SP 7 based on NW 7.4 SP 9
During Upgrade checks it says I must Upgrade Database first before continue since DB Release is too low for NW 7.4 SP9 as stated in Note
1951491 - Minimal DB system platform requirements for SAP NetWeaver 7.4 SP08
So, at this point I agree i have to update SQL Server to 2012 before next step
Now, my concern is that my Source System does not have the minimum NW SP level (14) to run under SQL Server 2012 which is 26.
Im currently running SAP Kernel 721 EXT Level 401 which is above mininum
According to Note 1651862 - Release planning for Microsoft SQL Server 2012 that would not be possible
Existing systems of SAP products that are out of SAP maintenance can be upgraded to SQL Server 2012 in order to prepare a SAP upgrade, if they match the SAP NetWeaver Support Package requirements defined below.
SAP products prior to SAP NetWeaver 7.0 are not supported at all on SQL Server 2012.
Required minimum SAP Netweaver Support Package Stacks (SPSs) for SQL Server 2012 (SAP ABAP, SAP ABAP+JAVA stacks)
SAP NETWEAVER 7.0 - SPS 26 (SAP BASIS 26, SAP BW 28)
SAP EHP1 FOR SAP NETWEAVER 7.0 - SPS 11 (SAP BASIS 11, SAP BW 11)
SAP EHP2 FOR SAP NETWEAVER 7.0 - SPS 11 (SAP BASIS 11, SAP BW 11)
SAP EHP3 FOR SAP NETWEAVER 7.0 - SPS 03 (SAP BASIS 03, SAP BW 03)
SAP NETWEAVER 7.1 - SPS 14 (SAP BASIS SP14)
SAP EHP1 FOR SAP NETWEAVER 7.1 EhP1 - SPS 10(SAP BASIS SP10, SAP BW SP10)
SAP NetWeaver 7.2 - no restriction
SAP NETWEAVER 7.3 - SPS 07 (SAP BASIS 07, SAP BW 07)
SAP EHP1 FOR SAP NETWEAVER 7.3 - SPS 03 (SAP BASIS 03, SAP BW 03)
If your system is running on a SPS lower than the one required above, you have to apply the minimum required SPS before upgrading/migrating to SQL Server 2012.
If you install a NetWeaver product on SQL Server 2012, the required SPS for your product must be applied immediately after the installation - see SAP note 1676665, section I for more information.
But performing the Upgrade would be technically possible? I mean not for productive use but technicaly during that time the Database is Upgrade and during SUM Execution.
According to the note it states if you install a Netweaver Product in SQL Server 2012, SPS must be applied immediately, so is kinda ambigous what SAP is saying.
Best
Martin

Hi Martin,
For a test scenario, there's no harm in trying it (other than spending a lot of time on it, but hopefully that will prove not to be a waste). Generally, I expect you'll be fine upgrading your DBMS even though you aren't on the required minimum SP yet. The main thing you'll be missing out on is the updates to DBACOCKPIT, but once you do your EhP upgrade (with sps update included), you'll be putting that in place.
So, you could try this on your sandbox system and see if there are any problems. I assume the intent is to start the EhP upgrade as soon as the DBMS upgrade is done, right? In other words, you won't be actually using the system without the required SP except to run the EhP upgrade?
Alternatively, you could do a minimal support pack update, perhaps just a Basis SP only, to the minimum SP needed for your current release, then do the DBMS upgrade, then proceed with the EhP upgrade. This would be the safest procedure, but, as I said, I expect you can probably get away without going to this level without much problem. Again, the idea would be minimizing the time between the start and end of the total project on each system (DEV, QAS, PRD, etc).
Regards,
Matt

Win server 2012

Similar Messages

Maybe you are looking for