Win Srv 2008R2 Black Screen at Log On (local and RDP)

Hello everyone.
This is my first post on Technet Forum but I have used a lot the information provided here.
I have a very nasty issue which I have been struggling with. I am managing a SB network with a 2008 R2 server, running AD, DHCP, DNS, FS, WS and SQL. The server is not virtualized and has a pretty good configuration (E5506*2, 24GB, SAS 15k). I usually access
it by RDP but I also have a KVM switch when I want to work locally.
The issue I have started about a moth ago and presents like this: I start the RPD connection, the authentication is successful but I have only a black screen with the mouse pointer. If i connect via KVM locally it doesn`t even start my monitor. The only
solution to get video back is to hard reset, even if I press the shut down button the only thing that happens is that it powers up the monitor, but it wont power off the system.
When I connect by RDP and I get the black screen I sometimes get the following events on the server:
TermDD: The RDP protocol component X.224 detected an error in the protocol stream and has disconnected the client.
TermDD:The Terminal Server security layer detected an error in the protocol stream and has disconnected the client. Client IP: 192.168.10.100.
When this happens (black screen at log on) the services on the server start to fail one by one withing a few hours. The first one is SSRS, which is programmed to generate several reports and send by mail at 4 am. This fails but I don`t have any errors in
event viewer. It is followed by all others (ADWS, DHCP, DNS, FPT, etc.) Most errors refer to connectivity problem related to the directory server.
Example of errors:
ADWS: Active Directory Web Services was unable to determine if the computer is a global catalog server.
DHCP-Server: The DHCP service failed to see a directory server for authorization.
I have tried everything I cold think or found online but to no avail.
Any ideas would be be greatly appreciated.
Thanks

Hi Alex,
Could you check if there is any warning or error logged in the event viewer during booting?
It may give some hints.
Best Regards.
Steven Lee
TechNet Community Support

Similar Messages

Black Screen after logging in locally to Windows 7 that previously had an open RDP session.

Here is what happens. I leave my home computer on (running Windows 7 Ultimate) and sometimes I will remote to it from another location (work, friends house, or wherever). When I return home, I will go to login, the screen then goes blank (no mouse cursor
or anything). I have to do a cold boot to get back into Windows. This only happens if I ever RDP into it sometimes during the day. It seems random. I've tried logging off the RDP session, just closing it without logging off, nothing seems to be the answer
in that regard. It seems very random at times. I'll go a week and I can come home and it will login fine with no problems. Then the next week it starts giving me the black screen after I come home and login locally. I've seen several black screen issues here,
but usually they are getting it before logon. Anyone have a clue what might be causing this?

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
As the question is off topic here, I am moving it to the
Where is the Forum... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Win 7/Z580: Black screen on boot up, before login screen?

Win 7/Z580: Black screen on boot up, before login screen?
=======================================
I find some interesting posting in this forum. Thanks for keeping this forum to help windows/Lenovo community. I like to pick up the brain of this forum to resolve the black screen issue. I am not sure, whether it caused by virus. I use Microsoft Security Essentials. I am not able to run this in command prompt.
I started my laptop this morning & login screen showed up. Once I entered my login credentials, I heard the sound that usually plays once a login is successful, but I ended up with a black screen. After this occurred, I had to hold down the power button to manually shut down the computer. Once I started it up again, I was prompted to do a system repair, which eventually ended up with all successful outcomes, but I now have a black screen with a cursor before the login screen now. I have no idea what caused this to happen. My laptop is a Lenovo Ideapad Model Z580 (500 GB HD, 6GB RAM).
I am not able to get into safe mode or any other mode, which all leads to a black screen described above. I am able to use the "Repair Your computer" tools after pressing F8 during booting only . All other options leads to Black screen with cursor in the middle
Last Known Good Configuration leads to same
Enable Low Resolution Video (640x480) leads to same My Z580 is not responding to CTRL+ALT+DEL Windows Logo keys as well.
**** I tried SAFE Mode. It loaded couple of drivers and paused at CLASSPNP.SYS load. It went to Black screen with cursor at center.
I am able to invoke control pannel from Command prompt of working PC by typing control.
Z580 PC is not responding to control from command prompt (under Repair Your computer) either.
Z580 is able to use the "Repair Your computer" tools after pressing F8 during booting .
Under local user login it provided Start Repair option. As I pick this option, I got the following. Problem signature
Startup repair offline
1 - 6.1.7600.16385
2 -
6.1.7600.16385
3 - unknown
4 - 21200332
5 - autofailover
6 -
4
7 - NoRootCause
os v - 6.1.7600.2.1.0.2561
locale id – 1033
Under Admin user login, it provided system recovery options. It is not picking up the recovery point created a while ago.
Windows Memory Diagnostics is not launching and shows a black screen without cursor.
I am able to get into command prompt. I tried the following there.
I am not able to run cmd as admin
I reviewed the past posting of this forum on this subject.
Windows 7 boots to an unresponsive black screen with mouse cursor...
System File Checker: Run sfc /scannow & analyze its logs in Windows 7 / 8
Windows Resource Protection could not start the repair service
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program generates in Windows Vista
Force SFC to Run in Windows 7
Windows Resource Protection found corrupt files but was unable to fix some of them
SFC /SCANNOW showed up
"Windows Resource Protection could not start the repair service
I did "net start trustedinstaller"
"Windows Resource Protection detected pending repair restart the computer"
I ran repair options using sfc /scannow /offbootdir=x:\ /offwindir=D:\windows
and got "Windows Resource Protection found corrupt files but was unable to fix some of them "
I did findstr /c:"[SR]" %windir%\logs\cbs\cbs.log >sfcdetails.txt I will be glad to attach the zip file that contain CBS.LOG & [SR] tag extract (xxx.txt).
I did not any find ERRORS there, SFC ended with message saying "found corrupt files but was unable to fix some of them" . It is misleading. There is no [SR] tag pointing to corrupt files. Does SFC through false positive like this?
I ran chkdsk. ResultsFile verification completed.
0 bad file records processed.
0 EA records processed.
CHKDSK is verifying indexes (stage 2 of 5)...
Index verification completed.
0 unindexed files scanned.
0 unindexed files recovered.
Windows has checked the file system and found no problems.
0 KB in bad sectors.
Failed to transfer logged messages to the event log with status 50.
It is puzzling me.
Thanks for helping.

I tried these steps 8/7/2015. I ran chkdsk. Results for D:\
File verification completed.
0 bad file records processed.
0 EA records processed.
CHKDSK is verifying indexes (stage 2 of 5)...
Index verification completed.
0 unindexed files scanned.
0 unindexed files recovered.
Windows has checked the file system and found no problems.
0 KB in bad sectors.
Failed to transfer logged messages to the event log with status 50.
Updated on 8/7
============
Here are my HDD config:
Volume ### Ltr Label Fs Type Status Info
Volume 0 F WDO_Media64 UDF DVD- Healthy
Volume 1 C NTFS Partition Healthy
Volume 2 D Windows7_OS NTFS Partition Healthy
Volume 3 E LENOVO NTFS Partition Healthy
Volume 4 G FAT Removable Healthy
Volume 5 LENOVO_PART NTFS Partition Healthy Hidden
I ran CHKDSK /F /X for C, D, E. All resluted to "Windows has checked the file system and found no problems."
F8 ===> Repair Computer===> Command Prompt ===> Works OK
F8 ===> Repair Computer===> Start up Repair ==> Results into "Startup repair could not detect a problem"
F8 ===> Repair Computer===> System Restore ===> "No restore points has been created on yout computer system drive"
F8 ===> Repair Computer===> System Image Recovery ===> "Windows cannot find a system impage on this computer"
F8 ===> Repair Computer===> windows Memory Diagnostiyics ===> "Black screen with Cursor in the middle"
After getting into Command prompt
I run net user
User accounts for \\
Administrator Guest
The command completed with one or more errors
It did not list other users in my laptop. I do not know why? I tried under F8 ===> Repair Computer===> Command Prompt ===> Works OK
Here is the result:
- Boot with Last Known Good Configuration (F8 menu) ===> Black screen with cursor in the middle
- Restore to a prior date (System Restore) - System Restore ====> Already reported in previous reply
- Try a clean startup Troubleshoot Application Conflicts by Performing a Clean Startup results in
Clean Start up
D:\Windows\System32>runas /user:administrator msconfig
Enter the password for administrator:
Attempting to start msconfig as user "MININT-84TH5FG\administrator" ...
RUNAS ERROR: Unable to run - msconfig
1060: The specified service does not exist as an installed service.
- Try loading defaults in BIOS - F2 ==> f9 ==> f10 ===> Black screen with cursor in the middle
Check if explorer.exe is running and start from CTRL+ALT+DEL (task manager - new task) ===> CTRL+ALT+DEL not responding
Is anybody in this forum point me to fix? Thanks for looking into this issue.

Ipod won't play video/podcasts or audio only a black screen with the play symbol and volume/progress bar. games work fine! any ideas?

Ipod video classic 5th gen won't play video/podcasts or audio only a black screen with the play symbol and volume/progress bar. games work fine! any ideas?

Here's some more info.
I tried installing the latest iTunes to my housemate's PC, logging into iTMS with my account, authorizing his machine to play my content, restoring my iPod to the factory settings, downloading the videos and copying them to my iPod.
It worked fine, and I can play my videos.
I have done the exact SAME thing on my own home PC twice, after completely uninstalling and reinstalling iTunes, QuickTime, and the Apple Software Updater. But I still can't get any videos downloaded on my home PC to play on my iPods.
Any thoughts?

I just buy a imac 27inch when after intalling everthing for windows 7 and all the drivers i need and goes to the restard part my imac just goes to a black screen with a blinking cursel and it just wont proceed anyone can help me with this?

i just buy a imac 27inch when after intalling everthing for windows 7 and all the drivers i need and goes to the restard part my imac just goes to a black screen with a blinking cursel and it just wont proceed anyone can help me with this?

Support articles for things like this would be here:
http://www.apple.com/support/bootcamp

Just upgraded my iPad to IOS5 and when the download was completed, a window said that there was an error and it could not restore. Now I have a black screen with the Apple logo and the circle lines. None of the buttons respond. Help, please!!

Just upgraded my iPad to IOS5 and when the download was completed, a window said that there was an error and it could not restore. Now I have a black screen with the Apple logo and the circle lines. None of the buttons respond. Help, please!!

Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. Maybe this will let the iPad reboot and then you may need to restore again but see if this helps to start the iPad first.

We are experiencing a black screen with the Apple symbol and a flashing light. We have tried to reset, unplugged without success

We are experiencing a problem with our Apple TV, it shows a black screen with the Apple symbol and a flashing light. We have tried to reset it by unplugging and pressing the main button on the devise. Please help!

Try a restore.
Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support

.mov from 4S is black screen when played with QT and QT 7/lion

Q1. .mov from 4S is black screen when played with QT and QT 7 on lion/mac book pro.
Q2 Also I want to burn it in DVD with common video format. Any recomment free burner software?
Very very very urgent!! Please help.

Hello there,
I have a similar problem! Windows 7 shutdown unexpectedly and since that I can not reboot in windows anymore only with safe mode where everything is a mess.
Also when it's trying to reboot in windows a blue window appears,says something about drivers and it is counting something (79.78...till100)but I m not able to read it cause it disappears immidiately and then black screen and then it turns to reboot in mac which works fine.
I m sorry if I confused you with my english...
If anyone knows please help!
Thanks

My iPhone 3GS on iOS 5.1 will randomly stop what I'm doing show a black screen then the spinning icon and then it shows my lockscreen. It takes about a minute to do this and it does it about 30 times a day. How do I fix this?

My iPhone 3GS on iOS 5.1 will randomly stop what I'm doing show a black screen then the spinning icon and then it shows my lockscreen. It takes about a minute to do this and it does it about 30 times a day. How do I fix this? It is EXTREMELY ANNOYING!

No, sounds like when you dropped it an cracked the screen it may have also damaged the logic board or the repair person damaged a cable.

My iPad downloaded ios 8 and all I get is an unresponsive black screen with the logo. And when I reset it it goes to the page where it says hello in a bunch of languages then I try to configure it and my screen once again goes black. HELP!

My iPad downloaded ios 8 and all I get is an unresponsive black screen with the logo. And when I reset it it goes to the page where it says hello in a bunch of languages then I try to configure it and my screen once again goes black. HELP!

Hello Lesliegrande,
Thanks for using Apple Support Communities.
Please follow the troubleshooting in the article below to help resolve this issue where you are unable to update your iOS device.
If you can't update or restore your iPhone, iPad, or iPod touch
Take care,
Alex H.

My ipad2 has a black screen with a spinning wheel and won't turn on of off

my ipad2 has a black screen with a spinning wheel and won't turn on or off

Try here > iPad: Not responding or does not turn on

Today, randomly my iPhone 5 stopped working. It has been on this black screen with the apple logo and some small white writing at the top of the screen for many hours. I've tried rebooting it and connecting to iTunes but nothing has worked.PLEASEHELP

It has been on this black screen with the apple logo and some small white writing at the top of the screen for many hours. I've tried rebooting it and connecting to iTunes but nothing has worked.
PLEASE HELP!!!!!!!!

It likely means there was still water inside it and something has now shorted out and permanently damaged one or more components. THE very worst thing you can do with wet electronics is energize them - even a small drop of water inside on any of the circuitry or electrical contacts can cause catastrophic damage.
Take it to Apple for a free evaluation, but most likely you will need to replace it. For the out of warranty fee ($269.00 USD) you will get a refurbished replacement (like new, with a factory new screen and battery). An out of warranty replacement will also re-instate your remaining warranty, or 90 days warranty, whichever is longer.

My touch is frozen on a black screen with the apple logo and a load bar, nothing works, tried resetting and everything, any suggestions?

My touch is frozen on a black screen with the apple logo and a load bar, nothing works, tried resetting and everything, any suggestions?

In that case....if you have Apple Care, give support a call - otherwise, walk it into the nearest Apple Store.
Good luck.

My iphone got wet and after letting it dry all i get is the black screen with the grey apple and a bunch of white writting, what do I do to fix it?

my iphone got wet and after letting it dry all i get is the black screen with the grey apple and a bunch of white writting, what do I do to fix it?

You can try and put it in a bag of uncooked rice for 5 days or so, but don't get your hopes up. If that doesn't work, you get an out of warranty replacement or buy a new phone.

So, after my iPod touch died, i plugged it into the computer to try and charge it, and now it keeps changing between the charging screen, the apple logo, and a blank black screen, still hasn't charged, and its been plugged in for almost an hour now

So, after my iPod touch died, i plugged it into the computer to try and charge it, and now it keeps changing between the charging screen, the apple logo, and a blank black screen, still hasn't charged, and its been plugged in for almost an hour now

See the not-charging topic of:
iPod touch: Hardware troubleshooting
Have you tried another cable?
Another charging source? Does iTunes see the iPod when you connect to your computer?
Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and cracked or broken plastic.
- An appointment at the Genius Bar of an Apple store might be in order

Win Srv 2008R2 Black Screen at Log On (local and RDP)

Similar Messages

Maybe you are looking for