Win Vista Audio Mixer, no device installed, no sound

Hi,
It started after running Windows update. The Audio Mixer by the sys tray displays a red rex on it. I've installed/Unistalled drivers many times with out success. Even the creative control pannel volume is grayed out.
Google's search revealed I am not the only one having this issue. Usually people sudgest to unistall and install, does not work on my particular case.
Sound card: X-FI Fatality Pro
Any help would be apriciated.
Thanks!

Quote from: gilbert1019 on 28-May-15, 09:35:01
May I know how you reset BIOS?  And your BIOS version is?
From your picture, it looks like audio driver conflicts, because there are many audio devices in the device managers.
There is a special reset hole, on the right side. BIOS Version E1773IMS.10D
It's not audio driver conflicts, the system is clean, only drivers from official MSI page.
This is bios side problem,OS reinstallation does not help, only bios reset or flash unlocked bios to be able to enable audio device again.

Similar Messages

  • MSI GS70 2QE - No Audio Output/Input Device Installed

    I'm using an MSI GS70 laptop and just recently ran into a problem where my audio device suddenly stopped working.
    playing GTAV I got the blue screen and reboot, and then this... I believe that the device is turned off like webcam on notebook, we can turn it on by fn + f6, but what about sound? 
    OS: Windows 8.1 with last updates

    Quote from: gilbert1019 on 28-May-15, 09:35:01
    May I know how you reset BIOS?  And your BIOS version is?
    From your picture, it looks like audio driver conflicts, because there are many audio devices in the device managers.
    There is a special reset hole, on the right side. BIOS Version E1773IMS.10D
    It's not audio driver conflicts, the system is clean, only drivers from official MSI page.
    This is bios side problem,OS reinstallation does not help, only bios reset or flash unlocked bios to be able to enable audio device again.

  • TS1538 iTunes 10.6.1.7 and Win/Vista Not Recognizing iPhone 4S!!!

    I bought my first iPhone which is a 4s two weeks ago, and the latest iTunes did not recognize it, while Win/Vista recognized it on the drop down list and as a camera.  The same iTunes was able to detect iPhone 4 which I bought for my family member.  I then connected iPhone 4s to iTunes under WinXP, and it worked fine, so I was totally confused.  I submitted the question to Apple iTunes Feedback, and did not receive any reply. 
    I have used iTunes many years with iPod and iTouch, and was happy with it, but this incident changes my perception of Apple completely!
    Eventaully, I did more research on the web, and learnt during the iTunes installation, iTunes did not update the device or USB driver for iPhone 4s!!!  It was solved, under Win/Vista, by updating the device driver by pointing to the iTunes directory.  My conclusion is this has to be a bug of the iTunes installation process.
    Very disappointed with Apple's lack of response.  I actually planned to switch to use Mac, but this experience or rather Apple's effort to rectify the problem has changed my attitude towards Apple completely.  It is a shame!  Or is this their tactic to encourage Win users to migrate to Apple Mac???

    I too have only recently encountered this problem. I have been able to burn disks before but it keeps making all these weird sounds. It might be a hardware problem but the fact that everything else that uses a disk works I doubt it.

  • No audio device installed after windows vista sp2 update

    Ok I will try to be as thorough as possible because I want to fix this problem and I hope somebody can help me.
    So A few days ago There was an update for my audio driver so I accepted.
    But after this update my sound worked but on next use the sound was gone.
    So......I used system restore but no help the same thing happened
    I went to the hp website to look up my audio driver for my model which was conexant audio 221
    After download the driver wouldnt let me install it. I go to check in device manger to install it manually and the sound section is gone literally so i cant reformat or reinstall or anything 0.0
    Somebody told me I need to upgrade to windows vista x64 sp2 which was in windows update.
    So i tried it and still the same crap
    I cant install the sound driver because there is no place in the device manager to install it to
    I just get a message saying device installation failed device not found
    i dont know what to do
    My laptop is a hp dv2700 special edition notebook
    Ive had it for a year no problems and this is the first major problem I've had ..............HELP
    Past audio driver was conexant : Conexant High-Definition SmartAudio 221 Driver
    Ive tried reading through support forums but you have to understand THE SOUND VIDEO GAME CONTROLS SECTION IN DEVICE MANAGER IS GONE
    when i go into the programs I find my audio devices which are conexant hd audio and conexant hd audio soft fax modem with smart cp but when I click on them nothing happens

    hi, im also exp. the same <text deleted> problem! i also get that error message "quick touch on screen display has stopped working" , lower right corner(volume icon)says"no audio output device is installed", no "video,sound & controllers" on device manager,  i had tried reformatting, multible virus\malware scanners, ive tried multible registry cleaners, DL updated drivers, bios, audio(can't install,no audio device),and ive tried all of these conbinations with or without the windows updates, besides the audio prob, the cd/dvd icon's gone frm My comp, cant use the mic, and or webcam, SMART is detecting a hard disk failure now(iminent 2 fail) <text deleted> !,lol...   ps HP or Microsoft really needs 2 take this into consideration, im tired of this, i will never buy another HP ever!! or windows!, **bleep** it if i have 2 spent another thousand dollars on a Mac,atleast ill get a much decent,"working" pc, that wontstress the **bleep** out of my mind!
    Message Edited by WendyM on 08-09-2009 07:35 PM

  • No sound on web videos like YouTube, Yahoo, etc but sound on them using Chrome. Sound works in Win Vista Home 32 bit and in media players. Just no audio using Firefox 4.0 Unninsdtalled and re installed Adobe Flash 10.2.513.1

    No sound on web videos but sound if I download them and then play them using any media player ( I use VLC 1.1.2) MP3s play fine.
    Audio fine on same videos using Chrome. Sound fine on Win Vista Home 32 bit No audio using Firefox 4. Adobe Flash 10.2.153.1
    Have un installed and reinstalled it rebooting each time. Same Videos play fine in Chrome so problem must be in Firefox/flash combination.
    http://www.codecguide.com/fix_for_flash_sound_problems.htm
    http://forums.techguy.org/multimedia/490867-fixed-adobe-flash-no-sound.html

    No sound on web videos but sound if I download them and then play them using any media player ( I use VLC 1.1.2) MP3s play fine.
    Audio fine on same videos using Chrome. Sound fine on Win Vista Home 32 bit No audio using Firefox 4. Adobe Flash 10.2.153.1
    Have un installed and reinstalled it rebooting each time. Same Videos play fine in Chrome so problem must be in Firefox/flash combination.
    http://www.codecguide.com/fix_for_flash_sound_problems.htm
    http://forums.techguy.org/multimedia/490867-fixed-adobe-flash-no-sound.html

  • "No Audio Device Installed" in Windows Vista.

    Back in september 2011 I mysteriously lost my audio. I have a red X over my speaker icon in my system tray. When I put the cursor over the speaker icon I get this message "No Audio Device Installed". I went to the HP Customer web page and found the audio driver: Realtek High Definition Audio Version 6.0.1.5548 (sp37324.exe). I downloaded the program and saved it to my download folder. I put a short cut to it on my desktop. The only way I can get sound is whenever I turn on my computer I right click the desktop short cut and run as Administrator and install the program. My sound comes on. It works as long as I keep the computer on. Whenever I restart the computer I'm back to the red X over the speaker icon.
    Now, Windows Update has sent me (on 3 occassions the last couple of weeks) an "optional update"...the Realtek High Definition Audio. Each time I download it and install it and do a restart,but I get the same red X over the speaker icon. It's Ground Hog Day!
    My question: Is it safe to uninstall the Realtek High Definition Audio driver and reinstall the sp37324.exe without totally sending my audio into a Black Hole? BTW,I don't have a recovery disk.
    I hope someone on this forum can help me. I've exhausted all avenues.
    This question was solved.
    View Solution.

    Hi,
    My suggetion: Totally uninstall it, reboot the machine and install it again. You can uninstall it from
       Control panel > Device Manager
       It should be under Sound ...
       Right click it & Uninstall
    Regards,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HELP No Audio Device Installed on HP dv4-145dx running Windows Vista Home Premium Service Pack 2

    I recently completed a Windows update and now my audio device is not functioning at all.  I am being told that NO AUDIO OUTPUT DEVICE IS INSTALLED. I have tried to use the Update Driver function and keep receiving the message " WINDOWS FOUND DRIVER SOFTWARE FOR YOUR DEVICE BUT ENCOUNTERED AN ERROR WHILE ATTEMPTING TO INSTALL IT."
    If anyone has advice on how to resolve this issue please help. Thank you.
    Dannette

    Hi,
    It seems that the Audio Driver is corrupt: 
    Please click Start->In the Search Field above, type DEVMGMT.MSC and Press Enter, it opens Device maanger Window,  click + next to Sound, Video and Game COntrollers, right click on IDT or High Definition Audio Device entry, and click uninstall.
    Click Start->All Programs->REcovery Manager->Select NO on Software Program Installation, click Next, select YEs on Hardware Driver installation, click yes, it shows all Drivers, choose Audio Driver, and click Install.Restart the PC, and check if the issue has fixed. If not, go to Control panel->Sound, on PlayBack Tab, right click on empty Space, select Show Disabled Devices, Show Hidden Devices, select Speakers, and click Set Default, play a file in Media Player, check to see if it works.
    Thank You.
    Kiran Talluri
    Say thanks by clicking the "Kudos! Star" which is on the left.
    Make it easier for other people to find solutions, by marking my answer "Accept as Solution" if it solves your issue

  • No audio device installed (Big iss

    Hello all,?I have Vista Ultimate and am using an Audixy 4. After installing the new drivers today (SBAXVSD_PCDRV_LB_2_2_0002) I lost my sound. At the device manager i see that "This device is working properly."?When I go to Controle panel/Sound I see the device but I almost none of the commands work (Disable, Test, Configure) only the Properties work but there I cannot do anything useful. When I right click on the Sound icon at the bottom right of the screen and go to Open Volume Mixer, it says "No audio device installed"?Yersterday I also had this issue and reinstalled Vista with a fresh install which fixed the problem. Today I had the same thing again and decided to use my onboard sound card (RealTek, 623_Vista_APO), and nothing changed! I am still getting the same errors as with the Audixy 4. Is there any sollution to this Vista bug? :angry:?Thanks for reading

    I am not sure why anyone is not replying with a resolution but I am having a similar problem. I am having a computer custom built and the Technician building it claims that Windows Vista will not recognize both the Soundblaster Xi Fi Extreme Music sound card and the MSI 8800GTX 768MB video card that I have chosen for the configuration. This is due to some conflict. The Technician claims the problem is the sound card and Creative needs to update drivers before this configuration can be done. Is this true? Can anyone explain why? I know Creative has Windows Vista drivers but apparently for this situation it does not resolve the conflict.

  • How to Install Win Vista -English Version on my Toshiba Satellite L300-2CZ

    Hello !
    I am an Indian, I purchased *"Toshiba Satellite L300-2CZ"* in France. I don't know French Language. I am an software guy.
    One my family friend purchased it in on-line in 2009. It is good configuration but Bad-luck for me is, it contains *French keyboard and French Windows Vista*.
    Anybody know how to solve this problem?
    I am facing lot of problems while while writing software code by using this Frech keyboard because we use English- Qwerty keyboard.
    *And Is it possible to install Toshiba's Windows-Vista -English version on it.*
    I installed generic Win-Vista home edition on it , it is working but there is lot drivers missing, So I am not able to use my Laptop at minimum.
    *Could you give me some information/suggestion to solve my problem.*
    Thank you,
    Regards,
    Khadar Shareef
    hyderabad-500 008
    India.

    It's not a problem to dowload all drivers needed either from Toshiba support sites or other good places.
    You need at least Chipset+Audio+Video+Network+Wireless drivers and (maybe) some additional like Touchpad, Quick buttons, Bluetooth, Web camera.
    In rare cases you can google drivers for unknown device (or just recognise it) through vendor/product IDs in device manager (VID_xxxx&PID_yyyy string in device properties).
    Problem with keyboard is simple (in most cases): buy keyboard stickers like this
    http://www.ebay.com/sch/i.html?_nkw=english+Keyboard+STICKERS
    It's not perfect solution but very cheap'n'fast.
    Alternative solutions are laser engraved letters on your keyboard or new english keyboard from Toshiba service (I can't even imagine its price).
    Guess you can't install *Toshiba's* Vista other than bundled with your laptop. But you can buy any boxed version of Windows meets your requirements, even Windows 7. There is no difference between *Toshiba's* and boxed version of Windows exept license limits, so I advise you to think about boxed Win7.
    Message was edited by: ibko

  • HELP ASAP! no audio output device installed with hp pavilion dv2500

    product name: hp pavilion dv2000
    model number: dv2710us
    product number:2CE75228LJ
    windows vista home premium 32bit
    my hp keeps telling that  have no audio output device installed and theres the the image for volume with a large red circle with a white x in it.
    this is not true because i have contexant  (i think that's what it is called) speakers installed.
    Lately when i would restart my computer the sound would work intermittently but for the past two days whether i restart my computer or not the image for volume with a large red circle with a white x in it is still there and says no audio output device installed. PLEASE HELP!
    This question was solved.
    View Solution.

    Hi, you can try the below steps to resolve the issue :
    Step 1 : Re-install audio drivers from HP Recovery Manager.
    1. Click Start, in the Start search box, type recovery . Then click Recovery Manager .
    2. In the Recovery Manager window that displays, click Next. On the Reinstall software programs that came with your computer screen, click No, I would like to see other options . Then click Next .
    3. In the Reinstall hardware drivers screen, click Yes . Then click Next. On the Welcome to Hardware Driver Reinstaller screen, click Next .
    4. In the driver list, select the name of the sound adapter installed on the system. Then click Next. When complete, the Reinstallation is complete screen displays. Click Finish to restart the computer. After the computer starts, test for sound. If the issue persists perform step 2.
    Step 2 : Re-install audio drivers manually
    If there is no sound and the error still displays, update the audio driver from the weblink below :
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-63129-1&cc=us&dlc=en&lc=en&...
    Step 3 : Restart the Windows Audio Service.
    1. Click Start , type services.msc into the search field, and then select services.msc from the list when it becomes available to open the Programs window.
    2. Scroll down to and select Windows Audio , right-click to open the drop-down menu, and then click Start .
    3. Right-click Windows Audio , click Properties , and then verify that Startup Type is set to Automatic .
    Restart the Notebook and check for the issue.
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****

  • T400 No audio Device Installed

    My T400 has all the latest drivers which say "working properly."  However I am still without functioning speakers and microphone.  When I go to volume mixer I see "No audio device installed."  I have been trying to troubleshoot this for weeks and have been unsuccessful following various tips.  I also called the brilliant phone support who couldn't even get my email down correctly to send me the self-guided troubleshooter or whatever they called.   Does anyone have any suggestions I could try to correct this problem.  Much thanks in advance!

    If you have just installed XP then that could happen if you do not have SP3. If you did just install XP then update to SP3 and reinstall the audio drivers again. Otherwise we will need more info.
    IT Specialist and Consultant
    Lenovo Tablet Evangelist
    Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
    Deutsche Community   Comunidad en Español
    Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

  • Can I install win 8 64 bit OS on dv6936 laptop win vista 64 bit OS

    I just purchased the HP Pavilliom 500 destop and would like to upgrade my laptop with desktop OS.
    Can I install my hp Pavilion 500 PC win 8 64 bit OS on my hp pavillion dv6936 laptop win vista 64 bit OS

    Hi Ibdman,
    You cannot use the Pavilion 500 desktop recovery disks to upgrade the operating system on your HP laptop.
    You would have to purchase either: a Win 8 retail upgrade or full install disc to change the operating system on your laptop.
    If you are considering upgrading your laptop you should consider Win 7 64 bit instead of Win 8.
    Jaco
    ****I am not an HP employee****
    Please give a" Kudos" if advice received is relevant or" Accept as Solution" if your problem has been solved.
    HP Products:
    810-150se Desktop
    17t-j000 Notebook
    1380t Desktop
    560z Desktop
    Errare humanum est.

  • Help Please!! no audio output device installed?

    Hi. I have a satellite A215-S4757 last night I installed some windows updats  went to bed because it was going to take awhile. When I got it had finished and was in sleep mode. When I turned it on I noticed the sound was on mute. Or I thought it was. When I attempted to turn the sound on I recieved the message "No audio output device installed". I updated BIOs 2.30 but that didnt work. If anyone could help me out I would greatly appreciate it!
    Thanks

    Try this!  Looks like you have Realtek audio.  I was having the same problem until I installed the updated Realtek driver directly from Realtek site.
    As many users have posted, I was having this problem with my Satellite L505-S5990. I tried most of the suggestions I could find here and on the 'net to no avail. I was surprised to see that this problem affected many laptop brands - even as far back as Windows XP!!
    Last week I think I finally found the answer (or at least Realtek did). My laptop has Realtek HD audio, and the drivers that came with laptop seemed to be the culprit. I checked the Realtek site last week, and they have an updated driver, dated 3/30/2010, for Windows 7 as well as other versions of Windows. It is Version 2.46.
    I downloaded and installed these drivers, switched back to going into sleep mode rather than hibernate and - so far - the computer wakes from sleep with sound intact!!!
    Hopefully these drivers will work for others.

  • New MacBook Pro Unibody Jun 2011 - No Audio Device / No Output Device Installed. Please Help.

    Dear All,
    I have installed OSX Lion on the 20th July 2011 and the problem started with the audio device installed. Itunes wont even play and iDVD and you tube would work without audio. I have tried everything from system diagnostic re-booting back to original snow leopard on 10.6.7 including taking it for service. The audio works intermittently when I re-start my MacBook but eventually disappears back to square one. Until restarted again.
    I am still under my 90 days from purchase date and the problem is I am no longer in London where I originally purchased the MacBook from - I moved to Delhi, India with my family and they don't have geniuses here only local service/ technicians who already tried fixing the problem.
    Very disappointed after spending nearly £1,600.00 for this.
    I don't want to go back to the local service centre for them to restart my MacBook to prove audio device is working.
    Is there any other option for me like refund or replacement?
    Many Thanks
    Shah

    Dear Lex,
    Thank you for your advice above.
    I have updated latest iTunes 10.4.1(10) 64 bit.
    I have updated latest OSX Lion: 10.7.1 Build 11B26
    Still the problem occurs. When laptop restarts the sound stays for 5-10 min before shutting down intermittently. In iTunes the music will not even run - other applications such as YouTube - it will run but no sound.
    I have tried everything now and I am certain it must be a software connected issue I am experiencing only.
    Please can you help.
    Many Thanks

  • HP Officejet 8500 Pro A909n-Installed Win 8.1- tried HP Sol Ctr&says "device install not complete"

    I was shocked when I was trying to do my reports yesterday, after upgrading to Win 8.1 and finding the driver for my OJ 8500 WILL NOT WORK in printing off ADOBE which lead to me trying to open the HP Solution Center and it just pops up a box that says HP Solution Center cannot run because device install NOT COMPLETE. I am losing time and money trying to figure out what I THOUGHT WAS SURE to be ADDRESSED BY HP. I am upgrading the entire office in another state....is this going to be an ongoing issue? Is there a better printer solution which keeps up with the operating systems? Please help.

    Hi Mtnman,
    I understand you're having issues with the Solution Center program after upgrading to Windows 8.1. I'm sorry to hear you're having issues but I will do my best to help.
    I'd like you to uninstall your HP printer software (if you have an HP computer, make sure you are only removing HP printer software from the computer) and once it's been completely removed we will want to attempt to reinstall. To reinstall the software I'd like you to download and run the HP Printer Install Wizard to get the software downloaded and reinstalled.
    Hope this helps, have a great day!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

Maybe you are looking for

  • Video blank (white) after using Create Apple TV version

    Hello, I have an MP4 file that cannot be played directly on Apple TV (won't sync). The movie will play in iTunes and separately using QuickTime. So I used the Advanced menu Create Apple TV version option to convert the video to be compatible with App

  • How to implement the Struts plug in concept in JSF

    Hi, In my application I need to preload some data and keep it in ServletContext. In the struts app, I could do the same using Plug-In. For doing the same in JSF, do I need to write the ServletContext Listener or does JSF has some wrapper classes to p

  • How do i set up or remove pre-emptive text?

    how do i set up and remove pre-emptive text? == This happened == Every time Firefox opened

  • Cancel WorkItem after execute a Method

    Hi all, Is there a way to cancel a workitem after executing a method? I put this method at the tab METHODS in the activity USER DECISION, but when the method is executed before the workitem, i need this closed. It´s because i am using a worklist at t

  • Question about controlling embed quicktime object with javascript

    Hello, I am using javascript to control an embedded quicktime object on my website a la http://www.protofunc.com/2008/02/01/controlling-embedded-video-with-javascript-p art-i-quicktime/ . The problem I am having is with the movie.Stop() command. When