Win Vista on S3620f Slimline

Have a S3630f slimline with hard disk crash. Installed new Hard disk to replace segate 3500620xx disk and initiated recovery from CD. Vista 64 will not load after recovery operation from CD or hard disk. Vista 32 and 64 will not load from a windows upgrade disk.
Win XP and Windows 7 load and run OK. Startup recovery error is "failed during setup".
All tests indicated passed with error code of 0x0. Windows 7 shows all but 1394 driver installed.
any Ideas?

Hi
Yes I can boot up successfully. I wanted to try and have just one directory with all my stuff in and get rid of the mirror image - or am I supposed to have both? Surely it's just taking up valuable space? I warned you that I'm a dunce ...... big sigh..........

Similar Messages

Can I install win 8 64 bit OS on dv6936 laptop win vista 64 bit OS

I just purchased the HP Pavilliom 500 destop and would like to upgrade my laptop with desktop OS.
Can I install my hp Pavilion 500 PC win 8 64 bit OS on my hp pavillion dv6936 laptop win vista 64 bit OS

Hi Ibdman,
You cannot use the Pavilion 500 desktop recovery disks to upgrade the operating system on your HP laptop.
You would have to purchase either: a Win 8 retail upgrade or full install disc to change the operating system on your laptop.
If you are considering upgrading your laptop you should consider Win 7 64 bit instead of Win 8.
Jaco
****I am not an HP employee****
Please give a" Kudos" if advice received is relevant or" Accept as Solution" if your problem has been solved.
HP Products:
810-150se Desktop
17t-j000 Notebook
1380t Desktop
560z Desktop
Errare humanum est.

Help, web cam is not working properly with win vista

Hii.. my web cam is not working properly with win vista..even if the icon appears bt it does nt start.. its
lenovo easy capture 2.5...so if u cud suggest me anything...
Moderator note; subject edited

re-install drivers and try again. ( also easy capture )

Can I access my music library on a 32bit PC running Win Vista Home Prem from a 64bit Laptop running win 7 Pro.

Can I access my music library on a 32bit PC running Win Vista Home Prem from a 64bit Laptop running win 7 Pro.I can logon to iTunes from the laptop but can't download my previous purchases thru the wifi.

Miketroach wrote:
Can I access my music library on a 32bit PC running Win Vista Home Prem from a 64bit Laptop running win 7 Pro
Yes.
The following article(s) may help you.
Troubleshooting Home Sharing
Security Software Issues
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

HT2292 I am using win vista and have installed itunes for my ipod shuffle four years back. now I have purchased iphone 4, and trying to reinstall itunes after uninstalling my earlier itunes i always get a message that error in installation. kindly help

I am using win vista and have installed itunes for my ipod shuffle four years back. now I have purchased iphone 4, and trying to reinstall itunes after uninstalling my earlier itunes i always get a message that error in installation. kindly help

You might find this article helpful: http://support.apple.com/kb/TS3694
It has the error range of 3000's which states
Errors 3000-3999 (3002, 3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the gs.apple.com server on ports 80 or 443. This may be because out-of-date or incorrectly configured security or firewall software is interfering, an old version of iTunes is installed, an entry in your hosts file redirecting requests to gs.apple.com (see error 1004 above), or because of your Internet proxy settings. If you are using a proxy, try without using one or with a known-good network. If that does not resolve the issue, follow iTunes for Windows: Troubleshooting security software issues. Error 3014 may indicate that you need to free up more disk space on the computer before trying to restore again. Error 3194 most likely indicates you do not have the latest version of iTunes installed Update to the latest version of iTunes.

Where is the custom stamp location in Acrobat 9 Pro for Win Vista

Where is the custom stamp location in Acrobat 9 Pro for Win Vista?

See this thread to find out how to determine the location:
http://acrobatusers.com/forums/aucbb/viewtopic.php?id=17521

Reader 10.1.1 / AcroQTP / Win Vista / QTP10 - objects not recognised

Hi there,
I get the same behavior problem with my config: Reader 10.1.1 / AcroQTP / Win Vista / QTP10
According the comments found on others posts here, that is supposed to run.
Vista settings are done to avoid any problems (security on users desabled, everything is made on admin account,...).
PDF Reader has been reinstalled, and other versions has been tried too ( 9 and 10.1.4).
Only the latest version of AcroQTP has been used (business restriction for only PDF v10 or higher).
As other users, I can see the add-in ein my list, the "pdf items" in the tool>object identification but:
- no way QTP recognises the pdf content items, but only one global object.
- the test script that is provided with AcroQTP stops because the first item is not found (smart identifiction on and off, same behavior) --> which excludes pdf problems (as it is supposed to be interactive and not locked).
Any idea what I may have missed?
Thanks for your help
KR
C.

I unistalled and reinstalled everything. I still get the issue:
Config:
QTP 10.0 with Patch HP QTP_00626, on Vista and Browser IE7
All plugins (AcroPDF, Flex, etc) appear in the QTP active Plugins window.
Tested versions:
Reader 10.1.1 (not in compatible list but Adobe recommends it anyway, see "http://forums.adobe.com/message/3956025?tstart=0#3956025") -> No go
10.1.2 (ideal with the latest AcroPDF plugin) -> no go
10.1.4 (known issues, see the same link above) -> No go
remark: I only focus on the second version of the plugin (see "http://labs.adobe.com/downloads/aptt.html"), as the old one is compatible with 9.x versions, which are out of my scope. There is a rumour about an hypothetical third version, but nothing concrete here.
Problem:
I always get "Failed to find object: Failed to find Acrobat" when I run the AcroPDF test which is in the tool package. No acrobat installed.
The user manual says "An unsupported version of Acrobat is being used or both Acrobat and Reader are installed." But my configuration definitely fits with these criterias.
A record in QTP only sees AVPageView item.
-> According the AcroPDF documentation, it is supposed to only happen with QTP 9, but it appears with QTP 10 as well...
Does anyone have a clue how I could fix my issue?

"VOX USB2.0 TV BOX" drivers for win vista

Hi there. I'm trying to install my VOX USB2.0 TV BOX on my Win Vista without success... Until now only got video working with Intervideo in win xp compatibility mode, but there's no sound :( the audio cable is connected on the mic in plug. Anyone has the drivers for Vista? I cannot find them on the msi website..
Thanks in advance.

Quote
the audio cable is connected on the mic in plug
It should be connected to your 'Line-in' connector. What mainboard/soundcard are you using? Make sure that input is selected as default Recording source in Control Panel, and is not muted.

How can i use control panel in win vista

Can i get an old version of icloud ( may be V.2 ) to install an use control panel in win Vista. The newest version (v. 3.1) only works in win 7 or win 8

You can get ver. 2.1.2 here: http://support.apple.com/kb/DL1687.

Re-Install CS2 on Win VISTA but setup.exe now does not respond

I successfully installed and ran my legal, registered CS2 Production Premium on two different Win VISTA 64 machines, first on my original desktop, then my current laptop, which is what I now use.
Each time, CS2 installed OK. I had learned the "trick" was to stop the installation after the last program, before the suite proceeded to do the final steps. If I failed to stop prior to those final steps, the error message about registration occurred. If I stopped prior to the conclusion of the installation, then each program worked fine.
HOWEVER... I recently downloaded and installed CS5 demo, then removed CS5. I had uninstalled CS2 in preparation (because of disk space and potential conflicts). I cleaned the registry, as I also did after uninstalling CS5.
When I went to re-install CS2 (using the original legal disks), now the setup.exe program DOES NOTHING. It whirs when clicked, as if it's launching, then sits idle, not performing any tasks. I've let it "try" for hours, but no results.
I have: clicked on the file from Windows Explorer, I have opened a command line window and run e:\>Setup.exe, I have even copied the disk to the desktop and tried to run Setup.exe from there. There is never an error message. There is only no activity whatsoever from setup.exe.
During the time of the last successful CS2 installation and the current attempt to install, there have been several Vista updates installed on the machine.
So, I have successfully run CS2 on Vista 64, but not since removing the CS5 demo. My system is a multi-core AMD 64-bit processor running Windows Vista Home Premium Build 6002 with all Microsoft updates applied. (And yes, having not had any paying job in almost three years, I cannot figure out a way to fund the upgrade...and, of course, Adobe has cut off support of any kind for CS2.)
Does anyone have experience and a solution?

CS2 is completely unsupported under Vista and Win 7. 64 bit makes it even more difficult.
Unfortunately, you're on your own here. Best bet would be to upgrade to CS5 and you should take note of the fact that if you don't and you wait til CS6 ships you will be out of the upgrade loop altogether and will have to pay full price.
Bob

Had Win Vista w/serv pack 2 and iTunes9. All the sudden it started prompting me for password constantly and telling me to "authorize Computer" then when I'd do so, it would tell me it WAS! My password was invalid,

I had iTunes9 in my Win/Vista/serv pack 2 and it was malfunctioning badly. Would not grant me access at all. I've got new password etc. but can't download 10.4.1 (64 bit) on my new ASUS laptop. It has 500GB of RAM, intel Pentium core 13 processor, Windows7/serv pack 1 plus fat a$$ graphics & sound but everytime I try to download iTunes, it tells me my computer hasn't been "modified"? Please HELP! What sort of modification do I need to do? I am a complete computer moron but I have to have my music. If you know how I can fix this will you help me in dummy speak please? TY to whoever ~ Phyllis

It may be a corrupt / damaged download.
If you live in a Region that allows re-downloading Music...
Delete the Song(s) and re-download...
See Here > Download Past Purchases > http://support.apple.com/kb/HT2519
If not... Contact iTunes Customer Service > Apple Support iTunes Store Contact Us

HOW TO INSTALL ACROBAT X STANDARD ON WIN VISTA 64 BIT. FROM ORIGINAL CD. GIVES ERROR MESG .. ?

HOW TO INSTALL ACROBAT X STANDARD ON WIN VISTA 64 BIT. FROM ORIGINAL CD. GIVES ERROR MESG .. ?
WHILE I WAS USING THIS APPLICATION ON SAME OS

Hi shaz2048,
Could you please provide us the Error message or the screenshot of the Error. Also did you try installing the software after copying the contents from the disc onto your computer.
regards,
Abhijit

How to Install Win Vista -English Version on my Toshiba Satellite L300-2CZ

Hello !
I am an Indian, I purchased *"Toshiba Satellite L300-2CZ"* in France. I don't know French Language. I am an software guy.
One my family friend purchased it in on-line in 2009. It is good configuration but Bad-luck for me is, it contains *French keyboard and French Windows Vista*.
Anybody know how to solve this problem?
I am facing lot of problems while while writing software code by using this Frech keyboard because we use English- Qwerty keyboard.
*And Is it possible to install Toshiba's Windows-Vista -English version on it.*
I installed generic Win-Vista home edition on it , it is working but there is lot drivers missing, So I am not able to use my Laptop at minimum.
*Could you give me some information/suggestion to solve my problem.*
Thank you,
Regards,
Khadar Shareef
hyderabad-500 008
India.

It's not a problem to dowload all drivers needed either from Toshiba support sites or other good places.
You need at least Chipset+Audio+Video+Network+Wireless drivers and (maybe) some additional like Touchpad, Quick buttons, Bluetooth, Web camera.
In rare cases you can google drivers for unknown device (or just recognise it) through vendor/product IDs in device manager (VID_xxxx&PID_yyyy string in device properties).
Problem with keyboard is simple (in most cases): buy keyboard stickers like this
http://www.ebay.com/sch/i.html?_nkw=english+Keyboard+STICKERS
It's not perfect solution but very cheap'n'fast.
Alternative solutions are laser engraved letters on your keyboard or new english keyboard from Toshiba service (I can't even imagine its price).
Guess you can't install *Toshiba's* Vista other than bundled with your laptop. But you can buy any boxed version of Windows meets your requirements, even Windows 7. There is no difference between *Toshiba's* and boxed version of Windows exept license limits, so I advise you to think about boxed Win7.
Message was edited by: ibko

How to install Macbook Pro OS 10.4.8 with BootCamp2.0 for WIN Vista Biz?

Please advise how do I install Macbook Pro 17" OS 10.4.8 with BootCamp2.0 for WIN Vista Business? I need urgently to install these softwares onto my new HDD 500GB due to faults (bad sectors, etc) of the original 250GB HDD.
Can I use the original Apple DVD 1 & DVD 2 for Apple OS to boot up the Macbook Pro's new HDD?
Highly appreciate any advice from themembers of Apple Support Communities
Alex Lian

It depends on the model MBP you own. Early 2008 only addresses up to 6GBs.. and then it goes up from there model to model.
See OWC and http://www.macsales.com for assitance on deciding how much.. If you plan to run Parallels and Windows as a VM, or do video editing etc. you'll probably need more memory. Otherwise mende1 is correct.

After deleting i tunes because of an error when updating, i cannot install 10.6 on my win vista laptop. when i select download, it loads for 3 secs then displays... thankyou for downloading but nothing has happened

after deleting i tunes because of an error when updating, i cannot install 10.6 on my win vista laptop. when i select download, it loads for 3 secs then displays... thankyou for downloading but nothing has happened

Try downloading it with another browser.
If that doesn't work, try following along with this Apple article -> iTunes: Downloading iTunes for Windows using Internet Explorer

Win Vista on S3620f Slimline

Similar Messages

Maybe you are looking for